whoami7 - Manager
:
/
home
/
fresvfqn
/
waterdamagerestorationandrepairsmithtown.com
/
Compressed
/
Upload File:
files >> /home/fresvfqn/waterdamagerestorationandrepairsmithtown.com/Compressed/dracut.tar
skipcpio 0000755 00000027570 15053306611 0006326 0 ustar 00 ELF > � @ �' @ 8 @ @ @ @ h h � � � h h h � � � � � � � � � � � � D D S�td � � � P�td � � � < < Q�td R�td h h h � � /lib64/ld-linux-x86-64.so.2 GNU � GNU GNU z�(:# �������LB ) � 9� � L 7 i � a E " � R " 0 > @ libc.so.6 exit feof strstr fseek __fprintf_chk stdout fclose stderr fwrite fread __cxa_finalize fopen64 __libc_start_main GLIBC_2.3.4 GLIBC_2.2.5 _ITM_deregisterTMCloneTable __gmon_start__ _ITM_registerTMCloneTable ti { ui � h � p � x x � � � � � @ � � � � � � � � � � � �H��H�� H��t��H��� �5R �%S � �h ������ �h ������� �h ������ �h ������ �h ������ �h ������ �h ������ �h ��q����� �h ��a����� �h ��Q����� ��%� D � ��%� D � ��%� D � ��%� D � ��%� D � ��%� D � ��%} D � ��%u D � ��%m D � ��%e D � �AUATUH��SH�����V H�~H�5� �f���H��H��� H��� � H�=� ����H���� 1�1�H���<����=u 0tjH�-l �@f. � H�ٺ � H������H��t(H� H�¾ H������H��t H��������t�H�����H��1�[]A\A]À= 7u��=� 0u��=� 7�w����=� 0�j����=� 1�]���L�%� 1�M���(H�5 L������H���� H��H�� �>�����u.1�H��H���M���H�ٺ L�� �� ��H��u�H��L�-b �����uTH����������H�ٺ � L���F ���H�������1����uBH��A� H9�u��u0H��1�1�H��������L)�1�H��H�l H������n���H�t H��1�����S���H�MH�=� � H�� ���H���2���� �h���H�MH�� H�=v � 1��j���� �@���H�H�� �� @ � �1�I��^H��H���PTL�F H� � H�=X����� �H�=� H�� H9�tH�� H��t �� � � � H�=� H�5� H)�H��H��H��?H�H�tH�u H��t��f D � � � ��=� u+UH�=R H��t H�=� ����d����� ]� � � � ��w��� � � �AWI��AVI��AUA��ATL�%l UH�-l SL)�H�����H��t 1� � L��L��D��A��H��H9�u�H��[]A\A]A^A_�ff. � � �� � �H��H��� Usage: %s <file> r Cannot open file '%s' Read error from file '%s' TRAILER!!! ;< `���p ���� ����� 0���X ���� ����8 zR x � ���/ D $ 4 ��� FJ w� ?:*3$" \ p���� < t ����| F�B�A �D(�D0� (C ABBA D � (���e F�E�E �E(�H0�H8�G@n8A0A(B BBB � P��� � � x X h p ���o 0 � X � p � � ���o ���o � ���o �o � ���o � 0 @ P ` p � � � � � GA$3a1 GA$3p1113 p U GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA! GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA* p � GA*GOW *� GA$3a1 e GA* � U GA*GOW * GA*FORTIFY GA+GLIBCXX_ASSERTIONS skipcpio-049-237.git20250603.el8_10.x86_64.debug �n��7zXZ �ִF ! t/���R] ?�E�h=��ڊ�2N� s���_>i���`��Sժ��u;f�i�h����H���~|a��Qq� ��qiO����� .�w ��,�>����u�O�|��p � ����'�e�����(�#k��� ���@J�����.�4Z�D��O��;%L�n-Кv��:�®zo���o)@�|W.}[�`�-�c��eux��u���aY���s % M3���Q�ke/f�S�����>HF8 [2-�n��gZ� Hnj�7�Ք��\������= ��1�#+?��-|�Fg�u͡<Ç�*����C4��>b�� _� kM�.U|� �'&�ib�[T H� �r�����f��id�=�9�K!��vko��� �4! �]��M�´�>�9�:T��<�����@� ^����4��U����;{��j_����v�mO^Ж�Y{_F�� @ ��&�8�)E�oi2�/�v�B�x�A=3U��vSA��[�ޗ�tM X�㔟���>X ɩ ~ SgE�doP�}� ���V �~��Ig��.���ʍD�]4��b�CN� �v�J�C2\��t��Ȓ}u�_ �� ��s�U�n��� �Ƙ��@mb��:%��<�� $�ӷׁu�JZa�*�dC �g �S`��̉���l��:ˤC��r&��')�Y U�.�t�Uտ�%��l, [ �۠�v j�{��[�PR�dh������D����`�pJ=��Ni 2�@�w���0��ˤT�ث����6��J�t��#>8x~�k|8�u.�� �����1��U�B����8�M*f�{�pp�6L%��YH#�3Y�m�5� M� �F[�' �� ǦJ:��g� YZ .shstrtab .interp .note.gnu.property .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rela.dyn .rela.plt .init .plt.sec .text .fini .rodata .eh_frame_hdr .eh_frame .init_array .fini_array .data.rel.ro .dynamic .got .data .bss .gnu.build.attributes .gnu_debuglink .gnu_debugdata � � � � & � � 4 $ G ���o 0 0 ( Q X X � Y � � � a ���o � � " n ���o � � 0 } � � B � � � � � � � � � p p � � X X � h h U � � � < � � h h � p p � x x � � � � � p p � � H h ` � �" 8 / �" � x& > dracut-install 0000755 00000224160 15053306611 0007425 0 ustar 00 ELF > P> @ 0 @ 8 @ ! @ @ @ � � � � � � � � �! �! p x � � ! � ! D D � �! �! S�td P�td 4� 4� 4� d d Q�td R�td � �! �! P P /lib64/ld-linux-x86-64.so.2 GNU � GNU GNU ��ݻ�WEr��E�G}�ŀqW j j l �bA��Pv�2���� � � � � � r c 8 D 7 � x � � ? � K � � ! � % � g � # > > Y � L � j � F � 9 � � � � 7 � " . � � � � I � � � T = . ` � � x E � � T � � g � i � � n � � � � � � i � S 0 ~ S ( � � � $ � * � ! ! K ! � (! \ 0! libkmod.so.2 __gmon_start__ _ITM_deregisterTMCloneTable _ITM_registerTMCloneTable kmod_module_get_module kmod_module_dependency_symbol_get_symbol kmod_get_dirname kmod_unref kmod_module_new_from_loaded kmod_module_new_from_lookup kmod_module_get_name kmod_module_get_softdeps kmod_list_next kmod_module_info_get_key kmod_module_unref_list kmod_module_get_info kmod_module_info_free_list kmod_module_get_dependency_symbols kmod_module_unref kmod_module_get_dependencies kmod_module_dependency_symbols_free_list kmod_module_get_path kmod_module_new_from_path kmod_module_info_get_value kmod_module_symbol_get_symbol kmod_new libgcc_s.so.1 _Unwind_Resume __gcc_personality_v0 libc.so.6 __xpg_basename strcpy __printf_chk fopen strncmp optind regexec __open64_2 puts fork futimes __stack_chk_fail __lxstat unlink mkdir realloc abort _exit memchr strpbrk popen getpid strspn strdup fts_close isatty feof symlink execlp fgets calloc strlen writev strstr strcspn __errno_location memcmp strndup __fprintf_chk fchown fts_read memcpy fclose __vsnprintf_chk strtoul malloc umask realpath __ctype_b_loc getenv fts_set regcomp optarg ioctl __snprintf_chk getopt_long pclose usleep __getdelim geteuid waitpid strchr program_invocation_short_name qsort __cxa_finalize syscall fts_open __xstat uname strcmp strerror __asprintf_chk __libc_start_main stpcpy sysconf free __progname GCC_3.0 GCC_3.3.1 GLIBC_2.14 GLIBC_2.4 GLIBC_2.7 GLIBC_2.3 GLIBC_2.8 GLIBC_2.3.4 GLIBC_2.2.5 LIBKMOD_22 LIBKMOD_5 p 0 P&y V a_& ^ � � ��� h ii s ii } ii � ii � ti � ui � "�& � �j � �! 0? �! �> �! �! �! �� ! �� ! S� @! � `! � �! � �! � �! "� �! +� ! 4� ! 8� @! ?� `! D� �! P� �! W� �! g� �! y� ! �� ! �� @ ! A� ` ! �� � ! �� � ! �� � ! �� ! 9� ! E� ! J� @ ! =� H ! N� P ! T� X ! Y� ` ! ]� h ! e� p ! l� x ! � �! �! �! # �! * �! 1 ! ! k (! l 0! m � ! � ! � ! � ! � ! � ! � ! � ! � ! � ! � ! ! ! ! ! ! ( ! 0 ! 8 ! @ ! H ! P ! X ! ` ! h ! p ! x ! � ! � ! � ! ! � ! " � ! $ � ! % � ! & � ! ' � ! ( � ! ) � ! + � ! , � ! - � ! . � ! / � ! 0 ! 1 ! 2 ! 3 ! 4 ! 5 (! 6 0! 7 8! 8 @! 9 H! : P! ; X! < `! = h! > p! ? x! @ �! A �! B �! C �! D �! E �! F �! G �! H �! I �! J �! K �! L �! M �! N �! O �! P ! Q ! R ! S ! T ! U (! V 0! W 8! X @! Y H! Z P! [ X! \ `! ] h! ^ p! _ x! ` �! a �! b �! c �! d �! e �! f �! g �! h �! i � �H��H�y� H��t��H��� �52� �%3� � �h ������ �h ������� �h ������ �h ������ �h ������ �h ������ �h ������ �h ��q����� �h ��a����� �h ��Q����� �h ��A����� �h ��1����� �h ��!����� �h ������� �h ������� �h ����� �h ������ �h ������� �h ������ �h ������ �h ������ �h ������ �h ������ �h ��q����� �h ��a����� �h ��Q����� �h ��A����� �h ��1����� �h ��!����� �h ������� �h ������� �h ����� �h ������ �h! ������� �h" ������ �h# ������ �h$ ������ �h% ������ �h& ������ �h' ��q����� �h( ��a����� �h) ��Q����� �h* ��A����� �h+ ��1����� �h, ��!����� �h- ������� �h. ������� �h/ ����� �h0 ������ �h1 ������� �h2 ������ �h3 ������ �h4 ������ �h5 ������ �h6 ������ �h7 ��q����� �h8 ��a����� �h9 ��Q����� �h: ��A����� �h; ��1����� �h< ��!����� �h= ������� �h> ������� �h? ����� �h@ ������ �hA ������� �hB ������ �hC ������ �hD ������ �hE ������ �hF ������ �hG ��q����� �hH ��a����� �hI ��Q����� �hJ ��A����� �hK ��1����� �hL ��!����� �hM ������� �hN ������� �hO ����� �hP ������ �hQ ������� �hR ������ �hS ������ �hT ������ �hU ������ �hV ������ �hW ��q����� �hX ��a����� �hY ��Q����� �hZ ��A����� �h[ ��1����� �h\ ��!����� �h] ������� �h^ ������� �h_ ����� �h` ������ �ha ������� �hb ������ �hc ������ ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%}� D � ��%u� D � ��%m� D � ��%e� D � ��%]� D � ��%U� D � ��%M� D � ��%E� D � ��%=� D � ��%5� D � ��%-� D � ��%%� D � ��% � D � ��%� D � ��% � D � ��%� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%}� D � ��%u� D � ��%m� D � ��%e� D � ��%]� D � ��%U� D � ��%M� D � ��%E� D � ��%=� D � ��%5� D � ��%-� D � ��%%� D � ��% � D � ��%� D � ��% � D � ��%� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%}� D � ��%u� D � ��%m� D � ��%e� D � ��%]� D � ��%U� D � ��%M� D � ��%E� D � ��%=� D � ��%5� D � ��%-� D � ��%%� D � ��% � D � ��%� D � ��% � D � ��%� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D � ��%�� D E1�H�|$H��t�.���M��tL�����M��tL���D���H���,���� �H����� �H����H�|$H��t������L�����H�����H�|$����H�����H���?���H�<$�f���H������� �H����1�H��H������D���H�����8���H�����H�����HDž���� H����������L���H���������H�������L�����L���A�������詁 A���tD��蛁 L���p���A����� �I����HDž���� �� ��K���H�E� E1�E1�L��H�E����H�}��{���L���s���L���k���H�}��b���H�E�I��H�}��R���H��tH�����L��H�}��9���H������ �H����H�E� E1�E1��H�E� E1�E1��u���H�E� E1�E1��b���D��躀 �H�E� E1�E1��E���� �I���n���1��g���H�}����H�}����L�����H�}����H������H��(������H�� ���H��t���H�����1�H�}�H��t���H�}�H��t���H��tH�����H�E�H��tH������L�����1��� �I����1��� �I���� �I���1�H�}�H��t�K���H�}�H��t�=���H��tH���0���L���H���1���1���1���1��1��1��1��1��H�}�H��t� ���I��1��� �I���� �I��1��� �I���1��v���1��o���1��h���1��a���1��Z���1��S���1��L���1��E���1��>���1��7���1��0���1��)���1��"����� �H��H����������H������� ���H���������L������H���_���HDžP��� H��P�������H������H��t����H��@���H��t�H���3����E1�L�����H������H��t������ �H����� �H���HDžP��� �HDžP��� �HDžP��� �s���HDžP��� �c���HDžP��� �S���E1��0���L������#���H������H�������]���� ���HDžP��� ����E1��B���E1��:���L�����H���H���1�H�����H���6���f D � �AWAVAUATI��U��SH��(dH�%( H�D$1��t ���, 1��%g � i �=�� ��� �e L�5�S L�-�S L��L����S �=`� H�� tQH�==� 1��v���H��H���� H�D$ H�\$� H����H�=�� 1�H���Z H��u�1���H�=�� ���H��H��� I��L��� 1��� H� >� H�5&� � �"d H��H�5C� �o � H�� �2���H� �� H���L �; �C H�5� H��������j 1�H�����H�Y� H���� H���@���L��L����R L��L��H��� ��R H�=�� H��� � H��� H�=�� �� H� �� H��tP�v�H��H��� � A��H�=�� 1������ H�=�� H�5� ���H�� H���; Lc-�� E�uL��A9�}EJ�� H�5�� M�<H�$I�?�����u"A�EH�$9��� A�M9�u ��I�DI�)݀=N� �,$�� �=<� �� �=2� � �$���� ���� I���/ O�4�O�d�L���h���H���� � �� ��� L��L��A� �@ �Å�t<�=�� u@PH� �� �K M��AVL��� � 1�H�5� � ��a ZY�=�� �� 1�� �c ����� ��H�L$dH3 %( ��� H��([]A\A]A^A_�H�=� ���H�+� H���� �8 �� H������H� � H�����L��� H� g� 1�� H�5H� � � �?a H�=(� H��t���� @ H����H�=i� ��Y H��u�� D H����H�=Y� ��Y H��u�� D H���p�H�=1� �Y H��u�H�=(� �SQ H�=� �GQ H�= � �;Q H�=<� �/�H�=� ��f H�=� ��f ���O�$�E1�1��J��� � � � L��A� H��I���` L��������t �=�� � A��I��D94$�5���M� $�X � 1�L��� H� ͝ H�5�� �_ M�,$�/ L����L��H���e����� H�D$H��t�L�|$1�� I���� M�/M���� M��` � 1�L�+� H� Y� H�5�� �_ � � L��L���� A� �v �Ņ�u�M��c � 1�L�� H� � H�56� �7_ �n���M� $�q � 1�L�D� H� ܜ � H�5� �_ ����H�|$�Te ���I�ٺ� L�� � H� ߝ H�5DŽ � ��^ ����K�4����9 �����H�==� 1�H��1�O�,�E1��H��H��H��H���VM�u I�H�=�� L���Q H��tL��H���?��t$L�����H�=�� H��H���O L���i! �A��I��D9<$�7���M�e � 1��� H�5� L�{� M��H� ՛ �] H�5�� L����H���[���M���Z���D��� ���L� 1� � L� � H� �� H�5�� � � �] �\���L��� H�$H���\���L�<$1�L�-f� � I���� I�/H���� AQM��I��H� �� AV�< H�5>� 1�� �8] AZA� A[� �� ��� L��H���% �Å�u�VL�؆ � I��AVH� �� �? 1�H�5� ��\ _AX�d���H�<$�2c ���� L�a� 1��� H� �� H�5�� �\ � �� �H�L� � H� �� � � H�5s� 1��r\ � ��� L�4� H� `� �� H�5C� �D\ � �z L�s� H� 7� �� �� �H������ �H������� �H������� �1�I��^H��H���PTL��� H� /� H�=�����R� �H�=�� H��� H9�tH�>� H��t �� � � � H�=i� H�5b� H)�H��H��H��?H�H�tH�� H��t��f D � � � ��==� u+UH�=�� H��t H�=�� �I��d����� ]� � � � ��w��� � H��t;SH����H��H��u�* � H��H��t�</H�B�u�|�/t�H��[�f�1��1�[�f � AW1Ҿ AVAUATUSH��H H�<$H�|$ dH�%( H��$8 1�H�i� H�D$ H�D$ H�D$( �y�H��I�����H���b H�L$L�t$0H�L$f D H�xp� H�D$ H�5� ��� ��� H�x(H�5 � ��I��H���[ H�¾ L����H���b L�� H����������!�%����t������ D�H�JHDщ� �H��L)��" H���|0 u�D0 H�T$H�<$L����H�\$���� H��tc � H���0�H��I�����H�����L��H���r�H�=�� H��H���J H�|$H���c�H��H��u�H�|$H��t���L���d�L����H�������H�<$H�t$�E��Å��� L�d$L�l$L��M���� D H�D$ L����H��H���$�H���<�H�=�� H��H��H����I H����H�<$L��H��� �H�\$��� H��t_f D H��� �H��H�����H�����H�=�� H��H���{I H���S�H�|$H���V�H��H��u�H�|$H��t���H�|$L���2�I��H���&���H�|$��M��tL�����1�H��$8 dH3 %( �� H��H []A\A]A^A_� @ H�|$H��������m���� � H�\$H��H���^����^���f. � H���X���H���K������� L��� H� '� �H�5(} � 1��"W ��� �:������ �H����� �H����� �H����� �H������ ���� �H����ff. � �H��� SH�5�� ��1�� I��H���������f D ATI��U��SH� � H�� dH�%( H��$� 1�f D E1�H� �� L���H�_| �u����� ��D=� �� Hc�H�>����� �H�=�� H�55| �a H�~� �H�=�� ��H�y� ���� � H��$� dH3 %( �� H�Đ []A\��W� �L���H�=�{ ��1���J� �-���H�5f� � H�= � �E����} �`� ����H�5:� � H�=^� ������ �6� ������� ������� ������ ������ ������ ������ ���H�5�� � H�=*� ������ ��� �a����\� �U���H�5�� � H�=r� �m����� ��� �)���H�5b� � H�=�� �A����= �Z� ���H�=6� ���H��� ������ ����H�=� ���H��� ���H�=�� �� �=�� u!�=�� t H�=y� t��� 9�tn��tj� ����H�=z ��H��H���J I��L��y 1��� H� �� H�5�y � �S H�5�y H���_ H�� �1����L��y H� q� 1��� H�5]y � �YS � ���H��H���t�H��� ���H��� ����L� � L��� �� H� � � H�5 y 1��R � �E���L� �� L�J� �� H� ֑ ��L� �� L�.� �� H� �� �L� �� L�چ �� H� �� �L� u� L��� �� H� �� �k���� L�� 1��� H� c� H�5Vx �WR � ��ff. � f�AVAUATUSL��$ ���H�� H� $ L9�u�H�� dH�%( H��$@ 1�H��H��I��H�D$ ��H��H���� H������1�H��I���D ���I��H���� L���W�I�UL�D H9�v+A�8/u%J�T-H��f � H���z�/uI��H9�u�1�H�|$L�� H��w �#����� H�|$�D$ ����� H�w��1�f D ��/��H����H��V���u�D�E���} H�sD��E1�f � ��/��H����I��V���u��M A8��D 1�E1��:u</��H����I����u�I9�s;L��1�f. � H���D.L�P�D.H9�vI9��@ H��B�D/��E1ҐI���� � � @ �QHc��</�. ���& ��Hc� � ���H����t��/u�H��I9�u���H�|$M9�woH�|$f�1�M��t B�D/I�rLc�B����� ��/�� �AL)�H�L� 7f. � A�T����L�H����t��/u�I����M9�v�B�D �-�H��L����H��� �H�|$� �H��H��$@ dH3<%( � H�� @ []A\A]A^�f D L����� � I��I��M9�� ���� H����I9��������H��E1���H���g���M�� � 1�L��� H� 4� H�5�t ��N H���`�H���.���D�1�E1�E�������E1�E1�� ���E1�E1�H�������� D � �e���L��t H� Ȍ 1��� H�5Tt � �PN � ������� �H���,� D SH���7A H��1�H��t H��������[�ff. � AWAVAUATUSH�� H� `� dH�%( H��$� 1�H�$ H�D$ H��� H� H���5 H��L�l$L�t$I��L�% t �)f D H�t$L���^ H���� H� H���} 1�I��L�� L��������� H�t$L�� �����t�L�L$L��s 1�H� ݊ � H�5s � �M H�|$���H�D$ H���y���f�H� $L�%{s H��t>H�H��t2H���* I��M��PH� y� H�5�r 1�� �L XZH��u�H� $H��$� dH3%( H��uFH�ĸ []A\A]A^A_�1��Կ L��r 1�� H� � H�5Or �PL � ���������=4� SH��u�=(� uR� [� E1�1�1�H��H�=�� ������u�I�ٺ� L�� � H� �� H�5�q ��K 1�[� E1�1�1�H��H�=�� �����t�I�ٺ� � 1�L�� H� a� H�5�q �K 1�[Ð� �UH�0r H��� SH��H� � dH�%( H�D$1�H��H�$ ������� H�<$H�5r ����H��H��tHH��H�� 1�H��q ���H���o��H�<$���H�D$dH3%( u:H��[]� � L� $�M � 1�L�9� H� � H�5�p �J ��g��L�)q H� ɉ 1��F H�5�p � �J � ����� �H����� �H����� ���f D � �SH��H��H�=>� 1�H�q � �+����x[� D H���5�� I��1��Y L�� H� � � H�5�o �I XZ[�f � UI��H��AWE��L��p AVAUATI��� SH��0 H�����������q �����H� � dH�%( H�E�1�VH�5�o HDž�� �I H�=� XL��Z�@���A�ń��% E��tH�����H�=�� � ������� L�����L�� L��������> ����� �I H��������H��H���� H�=Z� H��H���?: H�����1�H����H�Ko � �9/��L�H� Z� 1��{������ H����L�� �o������ ����H�����8H�������{ ���H��H���[�H������H� � �#����������� A��t ����� �� ��(�����% � = @ �2 = � �� ��It'����� �� �=�� tH�����1�L���3 D�����L�uo 1�H� D� �� H�5�m � �G H������M��1�L�Xo H� � �� � H�5�m �G �= � _AXt�=� u H����������=� L����Dž�� �� H��0���L�� ������h ��H���% � = � �R � L��1��c����������5 ��H����� L��1��� �:��A�Ņ��� ������Ǿ �@1��k���������� ��P�����L���D��������tK��P��������D��������t4����M��L�4n H� �� ���� � H�5Nl � �JF H��x���D��H���HDž���� HDž��� H���H�E�H�� �����������D�����Z^ D���R^ � D A� ���� D ����� L����t��(����� � �� � �� L��l H� � 1��� H�5�k � �E 1�E1�H��� ��H�������D��H�]�dH3 %( �� H�e�[A\A]A^A_]�f. � M��t � 1�L��z H� �� H�5k �E 1�A� � D �I�R���L��z H� j� 1��� H�5�j � ��D L��� A��1��E��� � L�����L��k 1�H� !� �y H�5�j � �D ����f D H������I�ك8�� L��k H� ߂ 1��� H�5Sj � �OD H���������H���� H��H��������H������A� 1ɺ � H��������������` H������������D�����L�������������� �*\ f. � �{��A�Dž��V L����� � H�������8�� 1�L��D�������x�D����L��k 1�H� �� �K H�5Vi � �RC D����D����uH�=*� tL������E��� � 1�L��j H� �� H�5i �C ����f�I��L��i 1��� H� `� H�5�h � ��B ���f�L���h��H�=� H��H���4 ����L��i H� � 1��� H�5�h � �B HDž���� H������A� ������ � L����L��i 1�H� �� �� H�57h � �3B H������ ���A�����f. � 1�L���&��I��H���� �����E��1�H��H�������a L��L�� �:��A�Dž��[ H����L�� ������� 1�H� 2� HDž�� H����A�} /H��g � ��M�D 1��(������ L����H����L��� �H��I��H�����1�AV�� L��h H� � H�5g � �A H�����A[L��X�r������ H������~��H�����r���=�� �� L���]���E��� � Dž�����������umH��M��L��v �D AVH� �~ � H�5f �@ XZ���M��� � 1�L��g H� �~ H�5Of �P@ A� �p��� D H��M��L��v 1�AVH� H~ �G H�5f � �@ XZ���f. � L���( ������ D L����L�"g 1�H� I~ �� H�5�e � �? ��(���H����@��5��A������I�ٺ� � 1�L��u H� �} H�5se �t? ��A�����M��� � 1�L��f H� �} H�5:e �;? ���������W �f���H�����1�L���e �;���H��L�����1�L��f AVH� c} �� H�5�d � ��> AYAZ�������L�Ae H� 9} 1��� H�5�d � �> � �����! H�5�d � 1��> �8���L��d H� �| 1��� H�5`d � �\> ������u@VH�5Ff L� f j L�qt H��H� f AVH�f AT���H�� � ���QH�5f 1�L� �e j L��e H��H� �e AVH��e AT���H�� �� �� ��� �� ��� �I���+��� �I���0��� ������ �I���@��� �I���'��� �I���M��� �I������ ����� ����� �I���2��� �I������ ��|��� ��u��� ��j��� �I������� ��U��� ��L��� ��C��� ��:��� �I������ ��%��� �I�����ff. � UH��AWAVAUATSH��XH�}�� dH�%( H�E�1�H�E� H�E� �2��H�E�H���� H�}�H�5�d �5��H��H��� H�M�1�H�}�� H��d ������� H�}�H�5;e �F��H��H�E��E� H�E�H�E�H�E� @ H���P������ H�u�H�}�H�ٺ ���H��~�L�M��� � 1�L�Ad H� z H�5�a ��; H�E�H�5�r H��I���n��H��� H�5d L���V��H���- H�5d L���>��H��� H�5d L���&��H���� H�5d L�����H���� H�5 d L�����H���� H�5d L������H���� H�5d L������H���� H�5�� L�����I��H���� H�5�c L������/ H��ID�H������I��H�������� ���� < �� L��� �� t H������u�� L��� ��A� 1�1�H��H��I��H�E��p�E����= H���u�M���Z L�oq H� xx � 1�H�5$` �%: XZL�}�H�5Cc L������H��t!�@ A� 1�1�L��L������Z H�}��q��L���y��H��H�E��M��I��H���! H���Y��H��I���.��I��H���B H���:��H��I�����H�E�H���� H�����H�E�H���� H�}�L���a��L���I��� H�=}b L�e�H���H�}��� ��ME�� ��1�H�5Sc H��L��1��*V A� 1�1�H��H��I�������: H�5 b L�����H��� �@ A� 1�1�L��L��������� L�M��� � 1�L��a H� �v H�5�^ �8 � M��� � 1�L��b H� �v H�5h^ �i8 �E� D H�}�����H��tH���*��H�}������E�H�]�dH3 %( �� H�e�[A\A]A^A_]� @ L�M��\ � 1�L�a H� :v H�5�] ��7 ����f � E1�L���e��H�}��\��L���T��L���L��H�}��C���M�M���� � E1�H�E� E1��L�M��f � 1�L��` H� �u H�5e] �f7 �w����E1�H�E� �s���H�}�� 1����A�ą�x<H�u�� ���������Q H�E��8#ƀ� u�x!txD���bO ����X��H�}�� �؉E��x����� �;��� �؉E���� � L���9���M�麌 � 1�L��_ H� �t H�5�\ �6 ���L�h�@A�Ƅ��� �z��H�I����I��I�E ���� �DA u�I�E L��u� f. � H��H���t�DA t�� M��L�K^ 1�H� gt �� � H�5 \ �6 E1�� 1�L��L�����E���u$D���=N H�}��d������*��� �؉E���M�麻 � 1�L��] H� �s H�5�[ �5 �L���a���L� \ H� �s 1��� H�5l[ � �h5 � ���� ��� ��B��� ����� ����� ����� ��,��� ����� �I���L��� ����� �I������ ����� ����� �I������ ������ ������ ������ �I�����ff. � f�UH��AWAVI��AUI��ATSH��H��8dH�%( H�E�1��"��L��I��H�E����H�E� I��H�E� M���7 H���. H���6��H�5�] H��I���K ���� M���� H�E�L��J�\;B�8 ���H�}�I��L��A� H�~] 1�� ������� 1�H�}�I��L��H�W] � ������� H���u�L�M��9 L�9] H� �q � 1�H�5�Y �3 H�u�H�}�A� 1�XZ1���H�}�1����H�}�����L������H�}�������H�M�dH3 %( �& H�e�[A\A]A^A_]� H�^\ L��H���f���H�[\ L��H���T���H�Z\ L��H���B���H�V\ L��H���0���L�u�L��J�\;C�> ���H�}�I��L��A� H�/\ 1�� �h������ 1�H�}�I��L��H�\ � �C���������L��X H� �p 1��5 H�5YX � �U2 �&L��X H� mp 1��# H�51X � �-2 � �s�� 1���������L��X H� )p 1��) H�5�W � ��1 �L�YX H� p 1��/ H�5�W � �1 �� �H����� UH��AWAVH�� ���AUATSH��� H�����dH�%( H�E�1�HDž ��� �����Å��< L�� ���M���w L��0���� @ H�� ���L���y���I��H���� L�����H�ǹ H�5�Z ��� ��u�L������I��I��L��Z 1�H� �n �� � H�5�V ��0 H� P� H���% H�; � Dž �������L��(����{f. � H��(���A� 1�1�H������ ���H��(�����u.I���� L�!Z � H� kn H�5NV �O0 H��(�������H���� H�; � 1�M��H��V L��HDž(��� H� � �������& H��(���L��� ������D���L��(���L�^V 1�H� �m �� H�5�U � �/ �c���f��� ������Z���H���������H��M��L�g �� PH� �m H�5nU 1�� �h/ XZ�����1�H�� ���H��t� ��H�M�dH3 %( ���� H�e�[A\A]A^A_]É������H�����I�����H��I��1��� AWL�Rf H� m � H�5�T ��. ^_�1��L�LU H� �l 1��� H�5�T � �. � ����U��� �H������ �H�����ff. � f�UH��AWAVAUATSH��HdH�%( H�E�1�H���_ H�E�I��I��E1�H�E�H�E�L�=K� H�E� � L�����H��H�E��̿��H��H���p H�=a� H���������� H�=R� H��������B H�}��Y����=ʣ tE1�1�1�H��L���~������ H�57� 1�1�H��A� H���A��H�� H�E���� H��I��L�GW � PH� Yk H�5\S 1�� H�E� H�E� �F- H�}�Y^���H�}����H��H�����A�ƅ��� H�}�H��t���H�}�H��t���H��tH���ӿ��H�}�H��t����L��L������I��H�������H�M�dH3 %( D���� H�e�[A\A]A^A_]�f � H�E�H��t�H���f�H��I��L�:d � PH� ej H�5hR 1�� �b, XZ�h��� H�U�H�u�H�}�臾��A�ƅ�� ���H�}����H�}�A�����E��DD���� H�}�A�����H���7����0����-��� E1��"���蛿��� �I������ �I���5��� ��4��� �I������ �I������� �I������ �� ��� �� �� @ UH��AWAVAUATI��SH��(dH�%( H�E�1�H�E� H�E� �ؼ���=I� H���� �=� �� L�����H��H���� H�=x� H���������� H�=i� H���������� 1�E1�H�}�H��t�ƽ��H�}�H��t踽��H��tH��諽��H�M�dH3 %( D���� H�e�[A\A]A^A_]�f D H�=� H���a�����N���I�ٺ) � 1�L�kb H� i H�5_P �`* �b��� H��������� �=;� H�E� �� �=%� �� H��� H��I��L��S H� �h �< � H�H�5�O P1���) H�5o� XA� 1�ZH��1�H�����A�ƅ��� �=e� � 1ۀ=U� �����L���!���I��L��S 1��C H� 1h H�5|O � �x) 1��}����H�u�L���$������< H�E��=J� I���? H���� L�5�� � f D H�}�L���d���I��H��� L��耻��E1�1�1�H��L��I��軹����u�L���o���H��I��1��� AUL�(a H� ag � H�5�N �( _H�}�AXH��t 蟼�� � I�ٺ8 � 1�L�Ba H� 3g H�5~N �( 1�A� �~���f�E1�1�1�H��H�=o� ������� ���I�ٺ$ � 1�L�` H� �f H�5(N �)( �+��� @ L�9` H� �f 1��� H�5�M � �' H�E��=� I���� M�������L���Ż�����L���H���I��L�xQ 1��@ H� Xf H�5�M � �' L�����L������H��H������A�ƅ������H�U�H�u�L��詹��A�ƅ��j���H�}�����H�}�A������E��AE�A���F���f. � H�E�I��M���x���L�������k��� H�E�I�ǀ=�� ����M���K���L�5|� � f. � H�}�L������I��H��t�L���4���E1�1�1�H��L��I���o�����u�L���#���H��I��1��� AUL� _ H� e � H�5sL �t& H�}�Y^H���?����P����5��� 1�A������W���A������L����=3� ����������ٹ��� �I��颾��� �I���ɾ��� �I������ �I��鹾��� �I��鱾��� �I��驾��� �I��顾��� �I��陾��� �I��鑾��� �H��鉾��� �I������ �I��� ���� �I��闾��� �I��钾��� ��}���� ��`���� �I���{���� �I���v���� �I���q���� �I���l���� �I���g���� �I���b���� �I���]���� �I���X���� �I���S���� �I���U��� � UH��AWAVI��1�AUA��ATSH�� H�=]� dH�%( H�E�1�HDžx��� �~���H��I���3���H�5�N H��H���Q���H��t H)�H� � �=� �1 E���� A�E�L��h���I�D�E1�H��H���H������H��`���H��x���H��X���H��h���L�oN 1�H� �b �� H�5 J � L� �$ H��</�� <=�� H�5�N H��HDž���� �6; ���� H�5�N H��� ; ���� H���O���H��D� H��`���H��L���&������ L������M��ut�="� �? �=� �� � �����L��賵����H�M�dH3 %( �7 H�e�[A\A]A^A_]�1�H��H���H��H��H��H��D� �@������*f � H��������L��AE��+���I��H���Z L��觷��H��I���<���L��A����E��y��=\� u��=R� uLH��h����� L��M H� pa H�5�H � L�1��z" ��=� �� �= � �� H������H������)������H�=kL �x���H��� H�5(K H���в��I��H������H������� D L���@������� L�� H������H��t�H��L��� H����������!�%����t�I������� D�H�JHDщ�@ �H��H)�t�H�������� uƄ���� I�ٺ� � 1�L�LZ H� M` H�5`G �a! H�����H�=�� H��H��� L���������?���L��菵�����H�5*L H���{8 ���\����f���H��X���H��L��HDž���� ������� H��x����]���H���u���I��H���1 H��`���H��L���G���H��x������ٲ��HDžx��� ���� L������M���� �=&� �� �=� � H��h���ASM��L��J H� 2_ � � �0H�59F 1��8 AYAZ�� H��h����� L�$Y H� �^ H�5F � L�1�� �=�� �� E1�L���w���H������H��t趲��H��h���H��h���H9�H��������1��X���I�ٺ� � 1�L��J H� v^ H�5�E � �'���H������H��t�T���A� ��t�E��t��=� � A� �w���L�K�$ � 1�L��I H� ^ HDž���� H�5E HDž���� HDž���� � H��h���H� �� H������H��I � H� H��L�@1�萰������ H��h���H��H������H�`I � H� L�@1��]������� H��h���H��H������H�9I � H� L�@1��*������� H������H������1Ҿ HDž���� H������H������H������H������H�������*���H��H��@���蛱��I�Ń�M���� fA�}bHDž���� �� A�EbM�M(��f���; L��H H� �\ 1��J H�5�C � � I�u(H��X���L��膲�����\ H��x�������H������H��P���H��� H��`���H��P���L�����H��x���A���u���HDžx��� E���5 L������M��u&�� H��������L��AE��K���I��H���� L���DZ��H��I���\�L��A������E��y��=|� u��=r� �� L��P���L�0G 1�H� �[ �y H�5�B � � � L�cG H� f[ 1��G H�5rB � �n HDžP��� H��P������H������H��t�&���H��@����ʯ��I���-���M�M(�N � 1�L�#U H� �Z H�5B � �=�� u�HDžP��� H��P����x���H������H��t跮��H��@��� t H��@����ѯ��H�������E���H�������9���H�������-����8����=8� �& �=*� u0H��h����� L��T H� HZ H�5[A � L�1��R E1�L�����H������H���������I�}(�������<���H��@���� L���]���M�M(�C 1�L��E H� �Y � H�5�@ �� �p���I�ٺ� � 1�L�HT H� �Y H�5�@ � �R���L������.���I�ٺ� � 1�L� T H� fY H�5y@ �z H������H����������M�M(�Y � 1�L�~S H� 'Y H�5:@ �; �.���I�ٺ� � 1�L�.E H� �X H�5 @ � �H��P���菫��H������H��t�ά��A� ���DžP��������0H��������P��� � L��D����I�ĉ�P���H���% L���o���H��I����L����身����y��=&� u��= � �!���M�� � 1�L��C H� 3X H�5F? �G ��QL��P����m 1�A�u(L��C H� X � H�5? � XZ�=�� � ������L��P���L�nR 1�H� �W �d H�5�> � �� 뿀=m� �� �=_� �d���AVM��L��Q 1�SH� }W � H�5�> � � �J���L��� ���H������H������H��h����� L��Q H� +W H�5>> � L�1��5 �>���苫���8 �� H��@���H��tH��� ���H������蒩��H������膩��H�������z����w���ATM��L�1Q 1�SH� �V � H�5�= � � ^_����H��h���APM�� L��A H� sV � �0H�5= 1��~ ^_���L�^B H� IV 1��� H�5U= � �Q �*����=� t � ���H��h����� L�OB H� �U H�5= � L�1�� ��貪��L�t= H� �U 1��. H�5�< � �� � �"���L�D= H� �U 1��( H�5�< � � ��L� = H� |U 1��4 H�5�< � � �� �H������ �H���ׯ��� ��˯��� �H������ �H���(���� �H���Ű��� �H������� �H���ѯ��� �H���(���� �H���)���� �H���*���� �H���.���� ����� �H���)���� �H���-���� �H���)���� �H���*���� �齯��� �H���8���� �H���3���� �H���/���f. � D � ����f � � �1�H9��������B��ff. � H��H��twH���� H�N H�F(H��tAH�A(H�F(H��t=H�H H�NH�FH��tH�AH�FH��t&H�H�G ��tk���G H���H�GH��u�H�O���H�L�(�� � H� �T �� H�5�S H�=�@ �A �H� �T �� H�5�S H�=�X �! �H� �T �� H�5�S H�=�S � �H��H��tH���� ��H�D�(H�H�F H�VH�H��tH�rH�0H�GH�F H�F(H��t$H� �� H�p �G H�wtkH���f D H� �� H�w�� � H� �S �� H�5S H�=�? �Y f � H� �S �� H�5�R H�=�W �1 �H� �S �� H�5�R H�=�R � �H� yS �� H�5�R H�=�R �� �H� YS �� H�5{R H�=�R �� �ATUSH�H��t$�P �H9�sz�JH��H�r�H H�[]A\� @ � H��I��� * H��1�H�|H��H!�H�G�H��H��耣��H��t�I�$�X� � �@ H�I�$�f. � ɸ �� Bȉ��ff. � �ATUSH��tG��H��I��H�\�(H��u�# H�[H��tL��H�;�U��u�H��[]A\�f�1�H��[]A\�f D H� IR �( H�5[Q H�=;> � �USH��H��tuH��H���� H��H�>�U H��Hi�H�Ή�H�� )����H������)�)Љ������}$ tH�r� H� k� H�H��[]ÐH��H��[]�2���f�H� �Q �� H�5�P H�=�= � �H� �Q �� H�5�P H�=�U �� �SH�wH��H��t H���(���H�sH��u�{$ tH�� H� � H�[�f D H��[駢�� � � ��� ��t��H���������u�� � � � �鷤�� � � �ATUH��SH���=* A�Ą��� H�k� H���� H�H�X� H�zH��1�H� Hǂ H��H)��� ���H�H��H����B HD�H����H��H�B HD�H�B H��H�*H�ZD�b$[]A\� @ � H�=܇ ����H��H���k���1�[H��]A\�f � � � ����H��H���k���1��А� �SH��H��t3H�? t 1�[�f � H��H������H�H��u��[�f D H� �O �� H�5�N H�=�; � �� �H��t����f��ff. � @ � �H��tGUSH��H��H�wH��t"H�nH��� ���H��tH��謠��H�sH��u�H��H��[]��� D �ff. � @ � �H��t/SH�wH��H��tf. � H�����H�sH��u�[� D � � � �AUATUSH��H���� I��H��H��I��A�U L���Hi�H�ډ�H�� )��������)�)�H��Ɖ�����H��t!L9`���� E�H��[]A\A]� D A�}$ t9H�5҅ H��tmH�H�Å H�.��L��L�f���H��� []A\A]�f��0 膞��H��H��u˸�� � H� �M �6 H�5�L H�=�9 �A ��0 H�=\� �_���H���f. � � �ATUSH��tkH��H��H��I��U H���Hi�H�щ�H�� )��������)�H��)ȉ����H��tH�L�`1�[]A\�L��H��H��[]A\�n���f D H� M �V H�53L H�=9 � f � � �H��tgUH��SH��H��H���H�߉�Hi�H�� I�ȉ�D)���D������)�)�H�������H��tH�@H��[]� H��1�[]� � 1��ff. � f�� �USH��H��taH��H��H�����Hi�H�ω�H�� )����H������)�)�H������H��t H�hH��H����H��H��[]� � 1�H��H��[]� @ � �H���� AWAVI��AUI��ATI��H��UH��SH��A�$L����Hi�H�� )��������)�)�H��Ɖ�����I��H��txL��A�$L���Hi�H���H�� )��������)�)�L��Ɖ�������H��u#��L��L�����M�/��L��M�wL�����1�H����[]A\A]A^A_ú������������ � �H���� AWAVI��AUI��ATI��H��UH��SH��A�$L����Hi�H�� )��������)�)�H��Ɖ�����I��H���� L��A�$L���Hi�H���H�� )��������)�)�L��Ɖ�����H��tI9�t H��L���'�����L��L�����M�/��L��M�wL�����1�H��[]A\A]A^A_ø���������� � � �H��twATI��UH��H��SH��U ��Hi�H�ω�H�� )����H������)�)�L����#���H��t H9XuH��H���}���H��[]A\� D [1�]A\�f � 1��ff. � f�� �H��tgH��tJH�H���tAH��t,H�H H�����H��HD�H�H��tH�H� H�@� � H�GH��u� � H�����1�H��tH� �f�H��H� �H �� H�5H H�=JH �m ff. � f�� �H��tWH��t:H�H��t2H���t H�H(H�H��tH�H� H�@� D H�GH��u� � H� 1�H��tH� �f�H��H� %H �� H�5�G H�=�G �� ff. � f�� �H��tgATI��UH��H��SH��U H��Hi�H�� I�ȉ�D)���D������)�)�L����a���H��t H�[H�@]A\�[1�]A\�f � 1��ff. � f�� �H��tH�GH��tH�@�f � 1��ff. � f�� �H��tH�GH��tH� �f. � 1��ff. � f�� �H��tH�GH��tH�@�f � 1��ff. � f�� �SH��t H�wH��tH�^���H��[� � 1�H��[Ð� �SH��tH�wH��t H� ���H��[�1�H��[�f � � �H��t�G � 1��ff. � f�� �H��t�G �����f D � �f�� �USH��H��tAH��t-H�^H��H��t!H�SH�3H��������t��x H�[ H��u�1�H��[]�f D H� �E �v H�5[E H�=;2 � �� �AVAUATUSH���� I��H���� L�vH��M���� � I�>M�f �U H���Hi�H�� )��������)�)�I��Ɖ�� �H��uEI�>A�U L��Hi�H�Ή�H�� )����L�������)�)Љ��!��L��H�����M��M���p���[]A\A]A^� � H� �D �� H�5cD H�=C1 � f � � �H���� AVI��AUI��ATI��USH���� H��A�U L���Hi�H�� )��������)�)�L��Ɖ��2�H���� L��A�$L���Hi�H���H�� )��������)�)�L��Ɖ����I��H��t^H�Ɖ�L������L��L�����1�[]A\A]A^�f�1�� D H� �C �� H�5cC H�=C0 � f � ���뾸�����f�� �USH��H��t1H�wH��H�?�"�H��H��tH��H���O�����x+H��H��[]ÐH� 9C �� H�5�B H�=�/ �A �H��1��F��� @ � �AVAUATI��USH��dH�%( H�D$1��G �xH������H��H��tPI��1�L��H�$ L������H��tY� @ 1�L��L��H�D����Lc�H��H��u�J�D� H� H�L$dH3 %( H��uH��[]A\A]A^�f D H����薖��f D AWAVAUATUSH��hdH�%( H�D$X1��=�� �� H��I��L�5C L�-n) � � H���� H�5�F H��耕��H�\ �; �� H�5fF H��1��ђ��H��t� H�hD�=x E��x�f�H��L�4$AD$AD$(AD$8I�D$H H�D$ H�\$谓��� L��D��H�D$L�l$ H�D$( �=���H���L����?���� ���=�������1�H�L$XdH3 %( uH��h[]A\A]A^A_��Z���f. � AWI��AVA��AUI��ATUSH��( H�L$H�l$dH�%( H��$ 1��Ĕ��L�L$M��H�� D� � H�þ ����H��D��L��Ƅ$ �I���D�#H��$ dH3 %( uH��( []A\A]A^A_�謔��ff. � �UI����H�=�x S1�H��H��Q� R� V� �r���H�� ��H��H��x �z� �����a����� �S� ]v ��x 謑����t[� D ���9v ����[� � ��� ��ff. � @ � ��f. � � ��ff. � � ���;=�u H���~ 1��f � L��L��H���b���f�� �H��� I���L�L$H��t7)D$P)L$`)T$p)�$� )�$� )�$� )�$� )�$� dH�%( H�D$1�H��$� ���$( H�D$H�D$ H�D$1�;=Cu �D$0 ~ H�L$dH3 %( u H��� � D H��L��L����������ff. � � ���t S1ۅ�x��[� �3�����t��t ��[þ H�=n? � ��t ��x-L�@ H� �A 1��I H�5P? � ���� D �؉��_����E L��? H� LA I��H�5? � 1����� Ht �\���ff. � � �PXL��? H���j���f. � PXH� �@ �\ H�5�> H�=�> H�����ff. � � �����9�u ��s � @ H�����ff. � @ � �PXL��? H�����f. � � �H����x��/�=�} H��� @ H� !@ �� H�5$> H�=C> �!����H� @ �� H�5> H�=/> ������ �H���s ��x�����u� s 1�H��� �� � ��} � D � ���r � D � ���wHc�H��l H��� � 1��ff. � f�� �AUL�-sl ATI��H�=V= US1�H��dH�%( H�D$1��D$ M��u�`I�|� ��H��t L���|�����t*H��H�� u�H�t$L���Q ��xL�l$�������G�H�T$dH3%( ��u2H��[]A\A]ÐH� �> �% H�5�< H�=�& ����������Տ�� D � �H���#�����x���8���1�H��Ð�����f � � �SH�=�< � ���H��tH��H��������xU����H�=�< ���H��H��t H���8�����x[�f�I��L��= � [H� �= H�5 < � 1��v���I�ٺ � 1�L�H= H� �= H�5�; �M����f. � �� �H�6H�?�����UH��SH��H�?H��tH�� @ 裌��H��H�;H��u�H��H��[]鉌��f � 1�H�? t � H����H�? u��f��ff. � @ � �ATUSH��tSH��H��t;H�/I��H��u�#f D H��t"H�+H��tL��H���_�����u�H��[]A\� 1�[H��]A\�f D H� > � H�5= H�=�& ������ �AUATUSH��H��tmH��H��tUH�/H��t=H��I��貋��I��� D H��t2H�+H��tL��L��H���|�����u�H��L�t�H��H��[]A\A]�f�H��1�[H��]A\A]�H� I= �, H�5n< H�=& �1����� �H��t�b���f��ff. � @ � �ATUSH��tkH���{����xH�����I��H��t=H�;H��H��u �Wf. � H��H�;H��H��t=�ˌ��H�E H��u�L�����E1�[]L��A\� � � 螉��H��H��t�I��H�E L��[]A\� � �H��t���f�1��ff. � f�� �ATUSH�� dH�%( H�D$1�H���K �o1�H���I����H��$H�N�xH�L$�%f D ��Hʉ$H�H��t*H�������Nj$��/v�H�T$H�BH�D$H�H��u�H���ʈ��H��H���� I����� L��謋��H�H���� A� f. � �E ��/w7��HU�E H�:H��t7H���t��i���D��H��H��t]�E A����/v�H�UH�BH�EH�:H��u�J��H� H�t$dH34%( H��uEH�� []A\�f D E1��x��� � H���(���1��� @ � ���H��H��u�1����� D � �H��� H�t$(H�T$0H�L$8L�D$@L�L$H��t7)D$P)L$`)T$p)�$� )�$� )�$� )�$� )�$� dH�%( H�D$1�H��$� H���$ H�D$H�D$ �D$0 H�D$����H�T$dH3%( uH��� ��&���f D � �AUATI��USH��H���� H��H���� �U���H�����K����|H���Ά��I��H��t?H�} H��H��u�] � H��H�} H��H��tD蚉��H�H��u�L��E1����H��L��[]A\A]�f � �k���H�H��t�H��I��I�<$H��u�H� H��L��[]A\A]� D H��H��[]A\A]����f D � �AVAUATUH��SH���� H��I��I���j�����H���� H���W����|H���څ��I��H��t8H�} H��H��u�T @ H��H�} H��H��t?誈��H�H��u�L������E1�[]L��A\A]A^� L��� H�H��t�H��I��I�<$H��u�H� L��[]A\A]A^� @ �xH���D���H��H��t�I���� � []A\A]A^���� � �AWAVAUATUSH��(dH�%( H�D$1�H��� L�l$L�|$I��H��L��L��H��H�D$ � H���� 1���D��L��L��L��H��D�s�x H��u�{H��藄��I��H��tkL��L��L��H��H�D$ �E H���� 1��! � L��L��L��H���� H��tGH�t$H��������I��H��u�L��E1��T���H�L$dH3 %( L��uPH��([]A\A]A^A_�f�I��H� �� H� �6 �� H�5�5 H�=� ��� �*���L�����̆��ff. � �� �AWAVAUATUSH��(dH�%( H�D$1�H��� L�d$L�t$H��H�D$ L��L��� H���� 1�� � D��L��L��D�kH���k H��u�{H���*���I��H��tgL��L��H��H�D$ �; H���� 1�� f D L��L��H���� H��tRH�t$��H��M�|� �� I�H��u�L��E1����H�L$dH3 %( L��uWH��([]A\A]A^A_�f � I�D� H� ��f�H� 95 � H�5�4 H�=< �Q�� �'���L�����\���ff. � �� �USH��H��tQH�5�5 ����H��H��t.H�������t"��H�,�H�} H��t�? u ���H�E H��H��[]� D H� y4 �. H�5�3 H�=� ��� �AWAVAUATUH��SH��H���� H��I��藂��I��H���� L�m I��1�L��M��u �z � I�<$H��tJ�;H��HE��W���H�I��u�H�{�E���H��H���� H��f D L���h���H��H��t?L�m M��t6H��H9�t�H��L���C���H���ο ��H��H��tKH��f � � H��H��[]A\A]A^A_� A� L�5�0 �"���� 謀��H��H��H��u�1��ff. � f�� �AUI��ATUSH��H���� H��H���� ���xH���Y���I��H��t:H�;H��H��u�D @ H��H�;H��H��t0�+���H�E H��u�L��E1��G�H��L��[]A\A]�f � L�����H�E H��t�H�E H��L��[]A\A]�f � H��[]A\A]����H��L��1�1�[]A\A]����f. � � �H��tWATUH��SH�H��H��tMH�����pA��H��H��諃��H��t8D��H� �A�T$H�� H�E 1�[]A\� � 1�� D � E1�뻸��� � UH��H��SH������H��t1H��H��H���\�����xH��[]ÐH�߉D$ �����D$ H��[]ø���f�� �H��t� D 1��ff. � f�� �AVI��AUATUSH��tdI��H��tlH� I��H��H��u�D @ H��I� $I��H�] H��t+L��H��蠁����u�H��H���@��H�] H��u� � I�$ [L��]A\A]A^� @ H� �0 �� H�560 H�=� ��f � � �UH��SH��H��t'H�7H��t H��� �H�3H��tH��H��� ���H��u�H��H��[]�ff. � f�� �AWI��AVAUATUSH��H��tpI��H��t~H� I��H��H��u"�Qf D I�t2H��H���W~��H�] H��t1L���V~��L��H��H��I���5}����t�H��I� I��H�] H��u�I� H��L��[]A\A]A^A_� @ H� y/ �� H�5 / H�=� ����� �AWAVAUATUSH��H��H��u H���= H���T H�,3H��E1�� H9�v�8 A�~u A�VA����H��H9�u�|3� �� � ����H�$H���� E1�H9�w8� f D H��H��H�T$H)��-���H�T$H��I�tFH�ZA��H9�vwI��1�H��I)�L���P{��H� $H��D��L�<�H��u�L��H�����I�H��u:H�<$�!�H�$ H�$H��[]A\A]A^A_�f D A�����;��� D A��E9�t�H� . � H�5�- H�=�- �� � H� �- �� H�5�- H�=�- �a��H��� � []A\A]A^A_��~�� � �USH��dH�%( H�D$1�H�$ H��tq�? H��tiH��� @ H���|��H�\H��t.�; t)H��H��������y�H�$H��tH����1�� D H�$H��tH�T$dH3%( uH��[]�1�1�1�������}��f D � �H��t{AUI��ATI��USH��H�/H��tVM��tBI�u L��H��u�4 @ H��t*H�3H��t"H���}����u�H��� []A\A]�f D I��t I�,$H��u�H��1�[]A\A]�1��f � � �SH��H��t!H�? t�h�H� �� H�߉���|��H��[�ff. � f�� �H��t SH�� H�;H��t �3y��H��u�[� � � � �dH�%����H��t� D H��� ��y��H��~dH�%����H���H� �/ �( H�5f, H�=�, �8� � � �ATUSH��tSH��H��tkH��H��� z��� I��H��t&H��� z��1�L9�rL)�L��H��H�<�r|������[��]A\�f D H� / �2 H�5�+ H�=� ���H� �. �3 H�5�+ H�=�+ ���� �S����y�+ �K{��� ��u���}w����x�[� � ��[� @ H� y. �A H�5g+ H�=w+ �9�f � � �ATU��S��z����H��D� �����uD�#[]A\� � H� . �U H�5+ H�='+ ����� �AUI��ATA��U� SH��� D �P� ��y��D��L���kz���Å�yE�pz�����u%��uԻ����H����[]A\A]É��K����Fz���H���ۉ�[]A\A]� D ����v����x�uĉ������� D � �H��t H��tH���yz������H��� � H ���Ð� �d�%���t��� @ S�w���� ��1��x��9����ЍT�d�%�[�ff. � � �ATUSH��dH�%( H�D$1�H�$ H���� I��H���� H���Oy��1�H��H��� H���z��H� $�U H��t=�9 u8��uD��H9��� A�$H�|$dH3<%( ��u|H��[]A\�f. � ��u ����� D ���� @ H� �+ �� H�5) H�=� ���f � H� �+ �� H�5�( H�= ) �������r�����x��f�� ���wHc�H��T H��� � 1��ff. � f�� �AUL�-�T ATI��H�=�( US1�H��dH�%( H�D$1��D$ M��u�`I�|� ��H��t L���|x����t*H��H��u�H�t$L���Q�����xL�l$�������G�H�T$dH3%( ��u2H��[]A\A]ÐH� �* �� H�5�' H�=� ����������w�� D � �H��H ��� AWAVAUATUH��SH��H���� H���� I��H��E1��u��I��H��I9�w9O�<4I��gt��I��H��t$L��H��H����x��K�|5 L��H����x��C�D= H��L��[]A\A]A^A_�f � H�=G �w�� @ H��H��H��[]A\A]A^A_��x�� � H��[]A\A]A^A_��v��ff. � f�� �U1�H��SH��H��H��t H���t��H��H��H��H��[]����ff. � f�� �ATUSH��PH�t$(H�T$0H�L$8L�D$@L�L$HdH�%( H�D$1�H�D$p�$ H�D$H�D$ H�D$H��� H���/t��H�\$I���/ D ��Hډ$H�:H��t5�t��L��H��H9��� Iċ$��/v�H�T$H�:H�BH�D$H��u�I�|$��r��H��H��tnH��H���q��H�L$p�$ H�L$H�L$ H�L$�#f D ��HL$��H�1�$H��t+H���q���$��/v�H�L$H�1H�QH�T$H��u� D H��H�\$dH3 %( u,H��P[]A\� @ 1��� @ � �&r��H��H��t�� ��$u�� @ � �AVAUATUSH���� H��I��L�nI��H���} H����r��J�<(H����q��H���8 H��L��H���Zv��I��H�(J�4#H9��� H�=O% A������ � �H��H��H9��� �H�K��\u��K��x�� ��Hc�H�>�� � �SD�RЉ�A�� �� D�R�A���@ ��A��7��AC�D�SE�Z�D��A�� � E�Z�A��� ��A���� A�JɅ��� ���� ��H��H�� ʈP��A��� � � H��H���)���� H��H������� H��H��� ���� H��H������ H��H������ H��H������� H��H������� H��H������ \H��H�����D�[D��A��0D�ڃ�0���� �kA��0���0���~ ��0E��xv��xrA��A��H��H��E �D �@�h��L��� � 'H��H���9���� "H��H���)���� \H��� L��[]A\A]A^�f. � E1�[]L��A\A]A^Ð� \H��H���H���� D L���`o��H��t�I����� ��0�'��� � �\x H��H��f�P����f. � H� �$ � H�5 " H�=� �����A�J�� ���A�J�������W����f D � �1����� D � �AVAUATUSH���� I��H���� H��H��� H�H�5�! H��HD�H����p��H��3@���� @��'tUI��L�-�! @��"�� �@��\�� L���p��H��u I��A�6@��u�L��H)�I�$H��L�u []A\A]A^�f��SH�sH���u)H��1��Cf. � ��'�� �PH�H��t H�Ȁ�\u�x �� �PH�H��u�H��H)�I�$�9H��H��H��H�M []A\A]A^�f � A�~ �3 A�vI�FI��@��� ����?��� �CH�K���! H��<\tQ<"tfH�B�R��t��\t?��"t H�����u�H��H)�I�4$�8H��H��H�E H��[]A\A]A^� � H�Ѐx �� H�P�@��u�H��H��H)�� @ 1�H��[]A\A]A^�f. � H� a" �� H�5� H�=� ����H� A" �� H�5� H�=� ����H� !" �� H�5� H�=� �a���H��H��H)����I��� ���H�H���H��� ���H��1�����ff. � f�� �AUATUSH��H�H��HD߀; tC�? t>I��H��H��H��I���Zn��L��H�H����o��I�E H�H�E H��H��[]A\A]� H��1�H��[]A\A]�� ��G�< v%�G�<v�G�<w'@���G�� � @���G��@���G�� � ������f. � � ��G�<w @���G�� D ������f�� �AWI��AVI��AUA��ATL�%�F UH�-�F SL)�H���oc��H��t 1� � L��L��D��A��H��H9�u�H��[]A\A]A^A_�ff. � � �� � �H��H��� /sys/devices modalias install/dracut-install.c 2 madfhlL:oD:HRp:P:s:S:N: DRACUT_FIRMWARE_PATH DRACUT_FIRMWARE_PATH=%s No SOURCE argument given %s/%s Out of memory! stat(%s) != 0 find_binary(%s) == %s %s/lib/dracut/hostonly-files a %s dracut_install('%s', '%s') hash hit items for '%s' ERROR: stat '%s': %m '%s' already exists dest dir '%s' does not exist mkdir '%s' '%s' install error lstat '%s': %m ln -s '%s' '%s' ERROR: ln -s '%s' '%s': %m dracut_install ret = %d cp '%s' '%s' Failed to chown %s: %m -fL --sparse=auto --reflink=auto cp --preserve=mode,timestamps cp ret = %d .so Script install: '%s' ERROR: failed to install '%s' ldd %s 2>&1 ldd: '%s' Not a valid dynamic program cannot execute binary file not a dynamic executable loader cannot load itself not regular file cannot read header cannot be preloaded => Lib install: '%s' .so. glibc-hwcaps /lib/fipscheck /lib64/fipscheck /lib/hmaccalc /lib64/hmaccalc %s/.%s.hmac %s/%s.hmac hmac cp '%s' '%s') firmware Firmware %s dracut_install '%s' OK dracut_install '%s' '%s' OK dracut_install '%s' '%s' dracut_install '%s' ERROR /lib/modules/ DRACUT_KERNEL_MODALIASES Handle module '%s' Failed to find module '%s' %s ERROR: installing module '%s' Handling =%s %s/kernel/%s %s/extra/%s %s/updates/%s Skipping %s Ignoring %s Handling %s FTS ERROR: %m .ko .ko.xz .ko.gz Failed to find module '%s' ERROR: installing '%s' PATH is not set DESTROOTDIR Out of memory %s/%d.log resolve_deps('%s') Handle '%s' dracut_install '%s' help version debug verbose ldd resolvelazy optional hostonly all module fips destrootdir logdir mod-filter-path mod-filter-nopath mod-filter-symbol mod-filter-nosymbol mod-filter-noname silent kerneldir firmwaredirs Could not get list of loaded modules: %m. Switching to non-hostonly mode. Usage: %s -D DESTROOTDIR [OPTION]... -a SOURCE... or: %s -D DESTROOTDIR [OPTION]... SOURCE DEST or: %s -D DESTROOTDIR [OPTION]... -m KERNELMODULE [KERNELMODULE …] Install SOURCE to DEST in DESTROOTDIR with all needed dependencies. KERNELMODULE can have the format: <absolute path> with a leading / =<kernel subdir>[/<kernel subdir>…] like '=drivers/hid' <module name> -D --destrootdir Install all files to DESTROOTDIR as the root -a --all Install all SOURCE arguments to DESTROOTDIR -o --optional If SOURCE does not exist, do not fail -d --dir SOURCE is a directory -l --ldd Also install shebang executables and libraries -L --logdir <DIR> Log files, which were installed from the host to <DIR> -R --resolvelazy Only install shebang executables and libraries for all SOURCE files -H --hostonly Mark all SOURCE files as hostonly -f --fips Also install all '.SOURCE.hmac' files --module,-m Install kernel modules, instead of files --kerneldir Specify the kernel module directory --firmwaredirs Specify the firmware directory search path with : separation --silent Don't display error messages for kernel module install --modalias Only generate module list from /sys/devices modalias list -o --optional If kernel module does not exist, do not fail -p --mod-filter-path Filter kernel modules by path regexp -P --mod-filter-nopath Exclude kernel modules by path regexp -s --mod-filter-symbol Filter kernel modules by symbol regexp -S --mod-filter-nosymbol Exclude kernel modules by symbol regexp -N --mod-filter-noname Exclude kernel modules by name regexp -v --verbose Show more output --debug Show debug output --version Show package version -h --help Show this help Module path filter %s is not a regular expression Module symbol filter %s is not a regular expression Environment variable DRACUT_FIRMWARE_PATH is not set convert_abs_rel(): target '%s' directory has no realpath. Path %s matched exclusion filter Path %s matched inclusion filter Could not open '%s' for writing. Could not append '%s' to logfile '%s': %m hash hit items_failed for '%s' '%s' already exists, but checking for any deps ERROR: failed to create directory '%s' --preserve=mode,xattr,timestamps Failed: cp --reflink=auto --sparse=auto --preserve=mode,xattr,timestamps -fL %s %s Failed: cp --reflink=auto --sparse=auto --preserve=mode,timestamps -fL %s %s you do not have execution permission ERROR: failed to install '%s' for '%s' could not get modinfo from '%s': %s Possible missing firmware %s for kernel module %s dracut_install '%s' '%s' ERROR dracut_install '%s' is excluded dracut_install '%s' not hostonly kmod_module_get_dependency_symbols failed Module %s: symbol %s matched exclusion filter Module %s: symbol %s matched inclusion filter No symbol or path match for '%s' Adding module '%s' to hostonly module list Failed to lookup modules path '%s': %m Failed to get name for module '%s' 3 Failed to lookup alias '%s': %d Failed to lookup alias '%s': %m Environment DESTROOTDIR or argument -D is not set! Environment DESTROOTDIR or argument -D is set to '/'! Environment DESTROOTDIR or argument -D is set to '%s': %m Could not open %s for logging: %m ERROR: installing '%s' to '%s' 'q��r��r��r��q��r��r��r��q��r���p��r���p��r���p��sp��r��r��r��r��r��r��r��r��r��r��r��r��r��gp��r��r��[p��r��Op��r���q��r��r��r��Cp��7p��r��+p���o��r��r���o��r��r���o��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r��r���o���o��yo��do��Ho��<o��install_one find_binary install_all resolve_lazy install_dependent_modules install_firmware cp hmac_install library_install resolve_deps convert_abs_rel ln_r dracut_install check_module_symbols install_module check_module_path install_modules modalias_list parse_argv main dracut_log_cp mark_hostonly install/hashmap.c h->n_entries >= 1 !h->iterate_list_head i hashmap_copy hashmap_move_one hashmap_move hashmap_merge hashmap_iterate_backwards hashmap_iterate hashmap_replace link_entry hash_scan hashmap_put unlink_entry remove_entry hashmap_ensure_allocated dracut-install: /dev/console install/log.c (level & 0x07) == level target >= 0 target < _LOG_TARGET_MAX DRACUT_LOG_TARGET DRACUT_LOG_LEVEL safe null Failed to open /dev/console for logging: %s Successfully opened /dev/console for logging. Assertion '%s' failed at %s:%u, function %s(). Aborting. Code should not be reached '%s' at %s:%u, function %s(). Aborting. Failed to parse log target %s. Ignoring. Failed to parse log level %s. Ignoring. log_target_from_string log_parse_environment log_set_target log_set_max_level log_open_console install/strv.c s || l == 0 i == c strv_parse_nulstr strv_remove_prefix strv_remove strv_split_newlines strv_split_quoted strv_split strv_find_prefix strv_find install/util.c postfix fd >= 0 close_nointr(fd) == 0 ret_u emerg state alert crit err warning notice info (r = sysconf(_SC_PAGESIZE)) > 0 ������������������������������������������������������������������������������������������������������������������������������������������������ �� �� �� �� �� �� �� ���������������������������������������������������������������������������������������������������������������������������� �������������������������������������������������������������������� �� split_quoted cunescape_length_with_prefix log_level_from_string safe_atou close_nointr_nofail close_nointr endswith page_size ;` � ,B��� |H��� �N��� O��� 5O��� WO��` P��� �P�� Q��` :Q��� �Q�� �R��� �S��P �S��� ]��| ^��� \^�� \b��� �b��� �f�� �j��� k��� �l�� �m��< �n��� ,o��� L|��x l���� l��� ����x ����� ,���0 ����l ����� ̣��� ����� ܥ��� ����� ����0 ����h ���� <���� L���� L���� ���� ̩��$ ,���P l���l ����� ,���� ����0 ,���d ���� ��� ����H L���` ܰ��x \���� ����� ����� ��� ��� L���0 l���D ����X ����� ����� ��� |���@ <���� |���� ,��� |���L ̸��p ܸ��� ��� ���� ��� ����� ̺�� ����$ ,���8 L���T ����p ܻ��� ��� ����� ,���� ���� ,��� ܽ��D ��X ,���� \���� ܾ��� |��� ����4 <���l \���� ��� ���� ���, ���� ��� |��$ ���P ,��� �� ���D ���| ��� ���� ��� ���D l��� ��� ���$ ���@ ��\ |��x ��� |��� ���� l��D ���\ ���x ���� ,��� ���� ���� ,��� ���� ���@ ���T ���� ��� L��, l��D ���� zR x � �X��/ D $ 4 �=��P FJ w� ?:*3$" \ �C��@ t 0Y��G F�wC�C�C zPLR x��) � P $ <Y��� { B�I�B �B(�A0�A8�G�� 8A0A(B BBBE , zPLR x�]) �������� 4 I��W ; T �\��* H� 0 l �\��C B�D�C �N�� AABA P �`�� � B�B�B �A(�A0�H ��Q DЀ� 0A(A BBBG ( zPLR x�u( �Ѐ����� 0 �H��" u 8 Ld��" A�` \ T `d��� B�B�B �B(�A0�A8�G��L�[�A�g 8A0A(B BBBA $ � �e��� H�T D D D F , H Hf��* � E�P�D0� AAH zPLR x�]' �0�� ( �G��" � ( H g��g E�e F DF jAA X � Pg�� T A�F B�P���P�A.Q. �.a. K '.�. .Y. .t. , zPLR x��& � ������ 4 �F��� � 8 � �s�� � A�C M������.s. � E � RG��� � 8 � �{��� � A�C D��E�F�� .Y. M D � �G��+ � < , D~��# � A�C W�����(.C A S. o.n. 4 �G��% � < � ���� | A�C M�����$.K. � J y.[. � zG��g � D � ����� � A�C H����H�� G �.^. .Q. ;.T. � �G��� � P < �a � A�C D��G�M��� A �.y. �.A. H.R. |.h. $ � �G��C � A ������ t � 8I��/ � F�B�B �B(�D0�C8�D`�hQp`hA`} 8A0A(B BBBA GhOpZhH``hQp[hB` ( zPLR x��# �`������ 0 lH��" # (��� $��� 4 0���� D[ A P �/ De G ( l ���� B�A�A �d ABE 4 � ����o B�A�A �v ABC F ABG 4 � Ě��� A�A�D f AAB D DAG L���I A�x G D ( |���) < ���� 8 P ����� F�A�D �� ABE ` DBJ � X���_ E�Q J Y G � ���� ( � ����Q J�A�G oD�A� � Ԝ��9 J�hF� L ���� F�B�A �A(�D0f (A ABBF r (F ABBC 8 \ ȝ��� F�A�A �T ABA J ABK 4 � ,���s J�D�J B AAD DCAH�� 0 � t���| E�A�D Y DAH FDAP ����� O�B�E �E(�G0�D8�D@� 8C0A(B BBBA G������P X \���� O�B�E �E(�G0�D8�D@� 8A0A(B BBBA G������8 � ���� K�D�G �Q ABF ACBJ��� � \���� t ��� d 8 \���s K�D�G �B EBA ACBJ��� T ����# h ����# | ء��# � �/ E�[ H F � ���' E�Z A F � ��� � ��� ( � ,���o E�A�D } AAG < $ p���� F�B�B �A(�A0�� (A BBBH L d 0��� O�E�E �D(�A0��(A BBBC�����H0����� ( � �l E�A�D o DAB @ � 4���� F�B�B �D(�A0�D@� 0A(A BBBG L $ ����6 B�B�B �B(�A0�A8�D� 8A0A(B BBBA H t ����� B�E�E �E(�A0�A8�G�z 8A0A(B BBBA ( � ���O A�M�I(A0F8F@N � (���A E�U F P H T��� $ P��� 8 L���. L h���� K�� F h ���� K�I D W A � ���� EAK � ����% AA^ � Ч��! \ � �� EAK � �_ HS E 4���- H\ D , H��� @ D��� T @���# 8 h \���� F�I�K �A(�F@w (A ABBB � �' HV B � ���� E�H C P Z � ���� $ � ����7 A�D�D dDA ����! 8 4 ���� F�A�A �A ABD C DBG L p ���� F�B�A �A(�D0V (D ABBC D (C DBBA � T��� 4 � `���� F�A�A �b AEH aAB Ȫ�� 0 Ԫ��� F�A�A �D@9 AABG T 0���� K�� A X p Ԭ��� F�B�D �A(�D0| (D ABBJ i (D ABBF G(A ABB\ � h���� F�B�B �A(�D0�{ (A EBBD l (A BBBE a(A BBB H , ���d F�B�B �B(�A0�A8�D` 8A0A(B BBBC H x ,���d F�B�B �B(�A0�A8�D`� 8A0A(B BBBJ ( � P��� E�A�D K DAF H � ����# F�B�B �B(�A0�D8�D@� 8D0A(B BBBD l < ����� F�E�A �A(�D0l (D ABBJ ] (D ABBJ D (A ABBF D(H ABB 4 � ���y K�A�D �EABH���H ��� 4 � P���N A�G�D0` AAB T AAA h��� < 0 t���� F�E�B �A(�A0�j (D BBBE $ p ��C E�D�D pDA H � ���� F�E�B �B(�A0�A8�D@y 8D0A(B BBBE ` � ����� F�B�B �B(�A0�A8�GP� 8A0A(B BBBG d8K0A(B BBB ( H ����� E�A�D0� AAA L t @���� K�E�D �A(�D0} (F ABBG S(C ABBA���� � ����3 E�m � ����) J�ZD� � ����X \\ A , ����� F�A�A �L CBG H l���W E�c H C E ( l ����O F�A�C �Z ABI H � ̶��� F�E�D �F(�D0| (C ABBA R (E ABBF � ���/ RN � 8���B Y�h 0 l��� F�A�A �D0� AABK L H���# 8 ` d���� F�I�K �A(�F@w (A ABBB � � ����� R�B�B �B(�A0�D8�D@h8D0A(B BBBJ������P@������D 8G�0A�(B� B�B�B�L D8A�0A�(B� B�B�B� $ 4 P���3 E�F�G TGA 0 \ h���| F�A�A �DpC AABE L � ����* F�B�B �A(�A0�b (A BBBK D (A EBBB � ���� t � ����� F�B�B �A(�A0�� (A BBBC o (A BBBJ � (A BBBI n (A BBBK H l ����p F�B�A �A(�D0E (D ABBD D(F ABB � ܿ��F � ��� D � ���e F�E�E �E(�H0�H8�G@n8A0A(B BBB , H��� ��@R ]� �� ��� �� �$� ��� �(� � �� �� �� 4 = ' P= ���}� �� ��S� t� |� �� �� �� ���j� {� �� �� ��� �� �� �� �� �� �� � � � � � � � � � � � � � � � �� �� �� �� �� �� �� �� �� �� �[� �� �� �� �� �� �� �� �� ��' w� �� ��~�� �4� �� �� �� �� �� �� �� �� � � � � � � � � � � � � � � � � � � �� �� ��Tm h �� ��w�� ��& ��$<�� ��� �3� � �4� �� �� ��KS� _�� �� �� �� �� �� �� �� � �� �%� � �� U ^ &H 7 ���3� X� s� �� �� �� � �� �� �� �� �� �� �� ��� �� �� �� �� �� �� �� �� �� �� �@� �� � e� � � �� h | & \q ���=� H�� �E� � �v� �� �� ��� �� �� �� �� ��� � � � � � � � � � � � � � � �� �� �� ��� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �w� �F� �W� �� �@� �� �� � ]� ��/ _� s ��� ��"'E �� �1� �� � � � � �� 0? �> �! �� h �� S� d � � v � l � R "� o +� H 4� a 8� m ?� f D� D P� L W� p g� P y� s �� S �� N A� �� �� �� �� 9� E� J� =� N� T� Y� ]� e� l� � p � @# � �! �! ���o h � � � � ! ` � x h ���o ���o � ���o �o � ���o & � ! p# �# �# �# �# �# �# �# �# $ $ $ 0$ @$ P$ `$ p$ �$ �$ �$ �$ �$ �$ �$ �$ % % % 0% @% P% `% p% �% �% �% �% �% �% �% �% & & & 0& @& P& `& p& �& �& �& �& �& �& �& �& ' ' ' 0' @' P' `' p' �' �' �' �' �' �' �' �' ( ( ( 0( @( P( `( p( �( �( �( �( �( �( �( �( ) ) ) 0) @) P) `) p) �) �) �) ���� GA$3a1 @# > GA$3p1113 �/ �� GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA* GA! GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*GOW *� GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA$3a1 �> %� GA$3p1113 Є � GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: gcc-annobin GA$running gcc 8.5.0 20210514 GA* GA! GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA* Є I� GA*GOW *� GA* �� � GA*GOW * GA*FORTIFY @? � GA+GLIBCXX_ASSERTIONS GA*FORTIFY Є �� GA+GLIBCXX_ASSERTIONS dracut-install-049-237.git20250603.el8_10.x86_64.debug Z-�C�7zXZ �ִF ! t/��%g `] ?�E�h=��ڊ�2N�c��� }�� �M���8�9��i�Cu]E7��C�X�:e��5�,�o�=��D���y�֤� #s�؈6��ˠYĦ�� ��{$s)R� v8p�o�ׄ����x�OK�� �����X��>��-�[��Tա�# y� b<��י�k���Z�ˁ�F, <0� 4�x��m�a�x�a���� g7��r��͜<wW��CP��E��]ZRTtS��� (G�� X���M����_�ɩr��YZ/ �s��2DH�4iA����009&�y���-�n�������M� ��w+����eAU�l�5�� o�nl�z?BX�,�VPw�Y�� z�X-5՚1,$�A9��(MSai-P?� �0��JJ՝O ����)×�����_��]>��%x����1�FC M:���&vpu�S�rF�㰜n�r����c�)#~��� q R�� ��%UU)��R��sS�Vj�Eaۛ3Ct�v��Ir�CqN���ߐ<�������kY��� < è�W]�e%�������é�X��戎�A���p ʍ�T�����s}��ސ��f�|�. �h��N �UH�C��bjn� ����&�0��l4���у�{v� n�:L��"�,eO�X�n�!!�vܲ/ �� "Kg��P��)'(������������� vN���N�|4�n�R����F3+�ޥs&�P`�d-��l�8��a��p�}A�J��ER�oљҲ (��x����f� 0��Ep$ؕ�: E�MC� �L�i��Ƈ9�v ����i(~V��T�7d��� �T��4�5D�g���N�k'��lk��ns j�[S��)���Y,��3,G o��zc�����@>�X�~����*yPvD H� =� ���5G��A�=�M �ؼ��8bK(&n�� �S}��GZ���T�T7�=������4��r���md�誎�@[�n\� �� ��^����wÆr ��s[ˀc��z\p dV��ʱ�#�ZM���`g\?��M�|r���������B�U1��*_�K��p� �9{p.)� �ǺB+��.鿖2*F��!u����k�;��a�5�@�4�2-�\L �AI�E�.0�#xR�Hc ��� �0H��? � �b; [F�+�l�2�����F,6-���loG�-�B�� �:jQ�f5?�>�3�ú\v~��Ǘ� �!; �n�&�yh ���Gȯz��_`�x��E�8Џw�T���� �a����3<�mLu����,�Yn�V`+���}�O!�XtqŊ��!��s�A��ыV� W�' f��ZL001�`��k�� U,��ޫ&K��`��HMu��� � �rr�0�Z�1�Ax& cM��ONi�]ޜ�Z{7Yi�d&ƐE6ʸ��!S��/����2��d� }S�'�r���>�z' "������n���i�=� Kz� ��ҍK��Ir�σ�{ΰt���ތ�G]֪GO� L!�f�^`ܿ�������ދ��H'�cC-o%�6����n�k�@�9�:D���A� N� �Qq�0����[ .2Fe�F� =�®)�Cx�[��1'Ң�E)6m6߃�E��u���pA���,�A�^�����Dž��"������6�Eå=�RH߷!�f%�ov�wG:`��|p�S44{�7N������ u��s�j�� X��KI��&��ih��r�خl�'JM5b���lhG89ͣ[~�s�S�j������G#~����3��<~�9\�Y�C�(m�e� �U}K(��I4��6��TI��l���tDN}M�XT��T���ˊ����I9��֑� 9�j�i]cj@ִT�6�<�0����&!��g��"�:��)'?�C볳a.�Gm1�W��� z4s����'��f�=2��J��"�n�����Br�$��4���xƸ�� g����T\�*�M�m6���v⥭��;O��m���&�}�~�Ƙ���Q~C�F�"�'�� �df��XL ���}����H!�M�qS-Tݭ�� �上8�u7%N������)��"�\x�#V Xdd�34K+f՛M�V���m9 5Z|���!I�x�8 jri �ay}`[� [��P;x�Q�d;�jA:K[�����T���ݍ1��<|dӨ���-^F�ӈ��0��:��l�@@�VBQcԙ�p1z�5�Ѩ����?�gV2�C�\��X�!�~ ��N��� Q�)o<�Q�Hlj���O\)���� �o87X�kJ*G#��]�� �$�̜y�Y��S� ���I�[��j;�\O%� Ыe����^lTf�;69ЍMojg�:(��)��;C��"O��x� w�ɍ� ��J ���ձ�g� YZ .shstrtab .interp .note.gnu.property .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rela.dyn .rela.plt .init .plt.sec .text .fini .rodata .eh_frame_hdr .eh_frame .gcc_except_table .tbss .init_array .fini_array .data.rel.ro .dynamic .got .data .bss .gnu.build.attributes .gnu_debuglink .gnu_debugdata � � & 4 @ @ $ G ���o h h 4 Q � � P Y � � � a ���o � � � n ���o � � � } x x h � B � � ` � @# @# � `# `# P � �) �) @ � �/ �/ %� � � � � 0� 0� ! � 4� 4� d � �� �� @ � � � � � �! � � �! � � �! � � �! � � � ! � � ! � ` ! ! " (a � 8 � < G 8 � � V dracut-init.sh 0000755 00000104533 15053306611 0007334 0 ustar 00 #!/bin/bash # # functions used only by dracut and dracut modules # # Copyright 2005-2009 Red Hat, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # export LC_MESSAGES=C if [[ "$EUID" = "0" ]]; then export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,xattr,links -dfr" else export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr" fi # is_func <command> # Check whether $1 is a function. is_func() { [[ "$(type -t "$1")" = "function" ]] } if ! [[ $dracutbasedir ]]; then dracutbasedir=${BASH_SOURCE[0]%/*} [[ $dracutbasedir = dracut-functions* ]] && dracutbasedir="." [[ $dracutbasedir ]] || dracutbasedir="." dracutbasedir="$(readlink -f $dracutbasedir)" fi if ! is_func dinfo >/dev/null 2>&1; then . "$dracutbasedir/dracut-logger.sh" dlog_init fi if ! [[ $initdir ]]; then dfatal "initdir not set" exit 1 fi if ! [[ -d $initdir ]]; then mkdir -p "$initdir" fi if ! [[ $kernel ]]; then kernel=$(uname -r) export kernel fi srcmods="/lib/modules/$kernel/" [[ $drivers_dir ]] && { if ! command -v kmod &>/dev/null && vercmp "$(modprobe --version | cut -d' ' -f3)" lt 3.7; then dfatal 'To use --kmoddir option module-init-tools >= 3.7 is required.' exit 1 fi srcmods="$drivers_dir" } export srcmods [[ $DRACUT_FIRMWARE_PATH ]] || export DRACUT_FIRMWARE_PATH="/lib/firmware/updates:/lib/firmware:/lib/firmware/$kernel" # export standard hookdirs [[ $hookdirs ]] || { hookdirs="cmdline pre-udev pre-trigger netroot " hookdirs+="initqueue initqueue/settled initqueue/online initqueue/finished initqueue/timeout " hookdirs+="pre-mount pre-pivot cleanup mount " hookdirs+="emergency shutdown-emergency pre-shutdown shutdown " export hookdirs } DRACUT_LDD=${DRACUT_LDD:-ldd} DRACUT_TESTBIN=${DRACUT_TESTBIN:-/bin/sh} DRACUT_LDCONFIG=${DRACUT_LDCONFIG:-ldconfig} . $dracutbasedir/dracut-functions.sh # Detect lib paths if ! [[ $libdirs ]] ; then if [[ "$(ldd /bin/sh)" == */lib64/* ]] &>/dev/null \ && [[ -d /lib64 ]]; then libdirs+=" /lib64" [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64" else libdirs+=" /lib" [[ -d /usr/lib ]] && libdirs+=" /usr/lib" fi libdirs+=" $(ldconfig_paths)" export libdirs fi # helper function for check() in module-setup.sh # to check for required installed binaries # issues a standardized warning message require_binaries() { local _module_name="${moddir##*/}" local _ret=0 if [[ "$1" = "-m" ]]; then _module_name="$2" shift 2 fi for cmd in "$@"; do if ! find_binary "$cmd" &>/dev/null; then dinfo "dracut module '${_module_name#[0-9][0-9]}' will not be installed, because command '$cmd' could not be found!" ((_ret++)) fi done return $_ret } require_any_binary() { local _module_name="${moddir##*/}" local _ret=1 if [[ "$1" = "-m" ]]; then _module_name="$2" shift 2 fi for cmd in "$@"; do if find_binary "$cmd" &>/dev/null; then _ret=0 break fi done if (( $_ret != 0 )); then dinfo "$_module_name: Could not find any command of '$@'!" return 1 fi return 0 } dracut_need_initqueue() { >"$initdir/lib/dracut/need-initqueue" } dracut_module_included() { [[ " $mods_to_load $modules_loaded " == *\ $*\ * ]] } dracut_no_switch_root() { >"$initdir/lib/dracut/no-switch-root" } dracut_module_path() { echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; } } if ! [[ $DRACUT_INSTALL ]]; then DRACUT_INSTALL=$(find_binary dracut-install) fi if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then DRACUT_INSTALL=$dracutbasedir/dracut-install elif ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/install/dracut-install ]]; then DRACUT_INSTALL=$dracutbasedir/install/dracut-install fi if ! [[ -x $DRACUT_INSTALL ]]; then dfatal "dracut-install not found!" exit 10 fi if [[ $hostonly == "-h" ]]; then if ! [[ $DRACUT_KERNEL_MODALIASES ]] || ! [[ -f "$DRACUT_KERNEL_MODALIASES" ]]; then export DRACUT_KERNEL_MODALIASES="${DRACUT_TMPDIR}/modaliases" $DRACUT_INSTALL ${srcmods:+--kerneldir "$srcmods"} --modalias > "$DRACUT_KERNEL_MODALIASES" fi fi [[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1 inst_dir() { [[ -e ${initdir}/"$1" ]] && return 0 # already there $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" || : } inst() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : } inst_simple() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there [[ -e $1 ]] || return 1 # no source $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" || : } inst_symlink() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there [[ -L $1 ]] || return 1 $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : } inst_multiple() { local _ret $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" _ret=$? (($_ret != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : return $_ret } dracut_install() { inst_multiple "$@" } dracut_instmods() { local _silent=0; local i; [[ $no_kernel = yes ]] && return for i in "$@"; do [[ $i == "--silent" ]] && _silent=1 done $DRACUT_INSTALL \ ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@" (($? != 0)) && (($_silent == 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@" || : } inst_library() { local _hostonly_install if [[ "$1" == "-H" ]]; then _hostonly_install="-H" shift fi [[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there [[ -e $1 ]] || return 1 # no source $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || : } inst_binary() { $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || : } inst_script() { $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" (($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || : } inst_fsck_help() { local _helper="/run/dracut/fsck/fsck_help_$1.txt" $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper || : } # Use with form hostonly="$(optional_hostonly)" inst_xxxx <args> # If hosotnly mode is set to "strict", hostonly restrictions will still # be applied, else will ignore hostonly mode and try to install all # given modules. optional_hostonly() { if [[ $hostonly_mode = "strict" ]]; then printf -- "$hostonly" else printf "" fi } mark_hostonly() { for i in "$@"; do echo "$i" >> "$initdir/lib/dracut/hostonly-files" done } # find symlinks linked to given library file # $1 = library file # Function searches for symlinks by stripping version numbers appended to # library filename, checks if it points to the same target and finally # prints the list of symlinks to stdout. # # Example: # rev_lib_symlinks libfoo.so.8.1 # output: libfoo.so.8 libfoo.so # (Only if libfoo.so.8 and libfoo.so exists on host system.) rev_lib_symlinks() { [[ ! $1 ]] && return 0 local fn="$1" orig="$(readlink -f "$1")" links='' [[ ${fn} == *.so.* ]] || return 1 until [[ ${fn##*.} == so ]]; do fn="${fn%.*}" [[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}" done echo "${links}" } # attempt to install any programs specified in a udev rule inst_rule_programs() { local _prog _bin for _prog in $(sed -nr 's/.*PROGRAM==?"([^ "]+).*/\1/p' "$1"); do _bin="" if [ -x ${udevdir}/$_prog ]; then _bin=${udevdir}/$_prog elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then _bin=$(find_binary "$_prog") || { dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found" continue; } fi [[ $_bin ]] && inst_binary "$_bin" done for _prog in $(sed -nr 's/.*RUN[+=]=?"([^ "]+).*/\1/p' "$1"); do _bin="" if [ -x ${udevdir}/$_prog ]; then _bin=${udevdir}/$_prog elif [[ "${_prog/\$env\{/}" == "$_prog" ]] && [[ "${_prog}" != "/sbin/initqueue" ]]; then _bin=$(find_binary "$_prog") || { dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found" continue; } fi [[ $_bin ]] && inst_binary "$_bin" done for _prog in $(sed -nr 's/.*IMPORT\{program\}==?"([^ "]+).*/\1/p' "$1"); do _bin="" if [ -x ${udevdir}/$_prog ]; then _bin=${udevdir}/$_prog elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then _bin=$(find_binary "$_prog") || { dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found" continue; } fi [[ $_bin ]] && dracut_install "$_bin" done } # attempt to install any programs specified in a udev rule inst_rule_group_owner() { local i for i in $(sed -nr 's/.*OWNER=?"([^ "]+).*/\1/p' "$1"); do if ! grep -Eq "^$i:" "$initdir/etc/passwd" 2>/dev/null; then grep -E "^$i:" /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" fi done for i in $(sed -nr 's/.*GROUP=?"([^ "]+).*/\1/p' "$1"); do if ! grep -Eq "^$i:" "$initdir/etc/group" 2>/dev/null; then grep -E "^$i:" /etc/group 2>/dev/null >> "$initdir/etc/group" fi done } inst_rule_initqueue() { if grep -q -F initqueue "$1"; then dracut_need_initqueue fi } # udev rules always get installed in the same place, so # create a function to install them to make life simpler. inst_rules() { local _target=/etc/udev/rules.d _rule _found inst_dir "${udevdir}/rules.d" inst_dir "$_target" for _rule in "$@"; do if [ "${_rule#/}" = "$_rule" ]; then for r in ${udevdir}/rules.d ${hostonly:+/etc/udev/rules.d}; do [[ -e $r/$_rule ]] || continue _found="$r/$_rule" inst_rule_programs "$_found" inst_rule_group_owner "$_found" inst_rule_initqueue "$_found" inst_simple "$_found" done fi for r in '' $dracutbasedir/rules.d/; do # skip rules without an absolute path [[ "${r}$_rule" != /* ]] && continue [[ -f ${r}$_rule ]] || continue _found="${r}$_rule" inst_rule_programs "$_found" inst_rule_group_owner "$_found" inst_rule_initqueue "$_found" inst_simple "$_found" "$_target/${_found##*/}" done [[ $_found ]] || dinfo "Skipping udev rule: $_rule" done } inst_rules_wildcard() { local _target=/etc/udev/rules.d _rule _found inst_dir "${udevdir}/rules.d" inst_dir "$_target" for _rule in ${udevdir}/rules.d/$1 ${dracutbasedir}/rules.d/$1 ; do [[ -e $_rule ]] || continue inst_rule_programs "$_rule" inst_rule_group_owner "$_rule" inst_rule_initqueue "$_rule" inst_simple "$_rule" _found=$_rule done if [[ -n ${hostonly} ]] ; then for _rule in ${_target}/$1 ; do [[ -f $_rule ]] || continue inst_rule_programs "$_rule" inst_rule_group_owner "$_rule" inst_rule_initqueue "$_rule" inst_simple "$_rule" _found=$_rule done fi [[ $_found ]] || dinfo "Skipping udev rule: $_rule" } # make sure that library links are correct and up to date build_ld_cache() { for f in "$dracutsysrootdir"/etc/ld.so.conf "$dracutsysrootdir"/etc/ld.so.conf.d/*; do [[ -f $f ]] && inst_simple "${f#$dracutsysrootdir}" done if ! ldconfig -r "$initdir" -f /etc/ld.so.conf; then if [[ $EUID == 0 ]]; then derror "ldconfig exited ungracefully" else derror "ldconfig might need uid=0 (root) for chroot()" fi fi } prepare_udev_rules() { [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; }) for f in "$@"; do f="${initdir}/etc/udev/rules.d/$f" [ -e "$f" ] || continue while read line || [ -n "$line" ]; do if [ "${line%%IMPORT PATH_ID}" != "$line" ]; then if [ $UDEVVERSION -ge 174 ]; then printf '%sIMPORT{builtin}="path_id"\n' "${line%%IMPORT PATH_ID}" else printf '%sIMPORT{program}="path_id %%p"\n' "${line%%IMPORT PATH_ID}" fi elif [ "${line%%IMPORT BLKID}" != "$line" ]; then if [ $UDEVVERSION -ge 176 ]; then printf '%sIMPORT{builtin}="blkid"\n' "${line%%IMPORT BLKID}" else printf '%sIMPORT{program}="/sbin/blkid -o udev -p $tempnode"\n' "${line%%IMPORT BLKID}" fi else echo "$line" fi done < "${f}" > "${f}.new" mv "${f}.new" "$f" done } # install function specialized for hooks # $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook # All hooks should be POSIX/SuS compliant, they will be sourced by init. inst_hook() { if ! [[ -f $3 ]]; then dfatal "Cannot install a hook ($3) that does not exist." dfatal "Aborting initrd creation." exit 1 elif ! [[ "$hookdirs" == *$1* ]]; then dfatal "No such hook type $1. Aborting initrd creation." exit 1 fi inst_simple "$3" "/lib/dracut/hooks/${1}/${2}-${3##*/}" } # install any of listed files # # If first argument is '-d' and second some destination path, first accessible # source is installed into this path, otherwise it will installed in the same # path as source. If none of listed files was installed, function return 1. # On first successful installation it returns with 0 status. # # Example: # # inst_any -d /bin/foo /bin/bar /bin/baz # # Lets assume that /bin/baz exists, so it will be installed as /bin/foo in # initramfs. inst_any() { local to f [[ $1 = '-d' ]] && to="$2" && shift 2 for f in "$@"; do [[ -e $f ]] || continue [[ $to ]] && inst "$f" "$to" && return 0 inst "$f" && return 0 done return 1 } # inst_libdir_file [-n <pattern>] <file> [<file>...] # Install a <file> located on a lib directory to the initramfs image # -n <pattern> install matching files inst_libdir_file() { local _files if [[ "$1" == "-n" ]]; then local _pattern=$2 shift 2 for _dir in $libdirs; do for _i in "$@"; do for _f in "$_dir"/$_i; do [[ "$_f" =~ $_pattern ]] || continue [[ -e "$_f" ]] && _files+="$_f " done done done else for _dir in $libdirs; do for _i in "$@"; do for _f in "$_dir"/$_i; do [[ -e "$_f" ]] && _files+="$_f " done done done fi [[ $_files ]] && inst_multiple $_files } # install function decompressing the target and handling symlinks # $@ = list of compressed (gz or bz2) files or symlinks pointing to such files # # Function install targets in the same paths inside overlay but decompressed # and without extensions (.gz, .bz2). inst_decompress() { local _src _cmd for _src in $@ do case ${_src} in *.gz) _cmd='gzip -f -d' ;; *.bz2) _cmd='bzip2 -d' ;; *) return 1 ;; esac inst_simple ${_src} # Decompress with chosen tool. We assume that tool changes name e.g. # from 'name.gz' to 'name'. ${_cmd} "${initdir}${_src}" done } # It's similar to above, but if file is not compressed, performs standard # install. # $@ = list of files inst_opt_decompress() { local _src for _src in $@; do inst_decompress "${_src}" || inst "${_src}" done } # module_check <dracut module> # execute the check() function of module-setup.sh of <dracut module> # or the "check" script, if module-setup.sh is not found # "check $hostonly" is called module_check() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret local _forced=0 local _hostonly=$hostonly [ $# -eq 2 ] && _forced=$2 [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then # if we do not have a check script, we are unconditionally included [[ -x $_moddir/check ]] || return 0 [ $_forced -ne 0 ] && unset hostonly $_moddir/check $hostonly _ret=$? else unset check depends cmdline install installkernel check() { true; } . $_moddir/module-setup.sh is_func check || return 0 [ $_forced -ne 0 ] && unset hostonly moddir=$_moddir check $hostonly _ret=$? unset check depends cmdline install installkernel fi hostonly=$_hostonly return $_ret } # module_check_mount <dracut module> # execute the check() function of module-setup.sh of <dracut module> # or the "check" script, if module-setup.sh is not found # "mount_needs=1 check 0" is called module_check_mount() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret mount_needs=1 [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then # if we do not have a check script, we are unconditionally included [[ -x $_moddir/check ]] || return 0 mount_needs=1 $_moddir/check 0 _ret=$? else unset check depends cmdline install installkernel check() { false; } . $_moddir/module-setup.sh moddir=$_moddir check 0 _ret=$? unset check depends cmdline install installkernel fi unset mount_needs return $_ret } # module_depends <dracut module> # execute the depends() function of module-setup.sh of <dracut module> # or the "depends" script, if module-setup.sh is not found module_depends() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then # if we do not have a check script, we have no deps [[ -x $_moddir/check ]] || return 0 $_moddir/check -d return $? else unset check depends cmdline install installkernel depends() { true; } . $_moddir/module-setup.sh moddir=$_moddir depends _ret=$? unset check depends cmdline install installkernel return $_ret fi } # module_cmdline <dracut module> # execute the cmdline() function of module-setup.sh of <dracut module> # or the "cmdline" script, if module-setup.sh is not found module_cmdline() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then [[ -x $_moddir/cmdline ]] && . "$_moddir/cmdline" return $? else unset check depends cmdline install installkernel cmdline() { true; } . $_moddir/module-setup.sh moddir=$_moddir cmdline _ret=$? unset check depends cmdline install installkernel return $_ret fi } # module_install <dracut module> # execute the install() function of module-setup.sh of <dracut module> # or the "install" script, if module-setup.sh is not found module_install() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then [[ -x $_moddir/install ]] && . "$_moddir/install" return $? else unset check depends cmdline install installkernel install() { true; } . $_moddir/module-setup.sh moddir=$_moddir install _ret=$? unset check depends cmdline install installkernel return $_ret fi } # module_installkernel <dracut module> # execute the installkernel() function of module-setup.sh of <dracut module> # or the "installkernel" script, if module-setup.sh is not found module_installkernel() { local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret [[ -d $_moddir ]] || return 1 if [[ ! -f $_moddir/module-setup.sh ]]; then [[ -x $_moddir/installkernel ]] && . "$_moddir/installkernel" return $? else unset check depends cmdline install installkernel installkernel() { true; } . $_moddir/module-setup.sh moddir=$_moddir installkernel _ret=$? unset check depends cmdline install installkernel return $_ret fi } # check_mount <dracut module> # check_mount checks, if a dracut module is needed for the given # device and filesystem types in "${host_fs_types[@]}" check_mount() { local _mod=$1 local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret local _moddep [ "${#host_fs_types[@]}" -le 0 ] && return 1 # If we are already scheduled to be loaded, no need to check again. [[ " $mods_to_load " == *\ $_mod\ * ]] && return 0 [[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1 # This should never happen, but... [[ -d $_moddir ]] || return 1 [[ $2 ]] || mods_checked_as_dep+=" $_mod " if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then return 1 fi if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then module_check_mount $_mod; ret=$? # explicit module, so also accept ret=255 [[ $ret = 0 || $ret = 255 ]] || return 1 else # module not in our list if [[ $dracutmodules = all ]]; then # check, if we can and should install this module module_check_mount $_mod || return 1 else # skip this module return 1 fi fi for _moddep in $(module_depends $_mod); do # handle deps as if they were manually added [[ " $dracutmodules " == *\ $_mod\ * ]] \ && [[ " $dracutmodules " != *\ $_moddep\ * ]] \ && dracutmodules+=" $_moddep " [[ " $add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \ && add_dracutmodules+=" $_moddep " [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \ && force_add_dracutmodules+=" $_moddep " # if a module we depend on fail, fail also if ! check_module $_moddep; then derror "dracut module '$_mod' depends on '$_moddep', which can't be installed" return 1 fi done [[ " $mods_to_load " == *\ $_mod\ * ]] || \ mods_to_load+=" $_mod " return 0 } # check_module <dracut module> [<use_as_dep>] # check if a dracut module is to be used in the initramfs process # if <use_as_dep> is set, then the process also keeps track # that the modules were checked for the dependency tracking process check_module() { local _mod=$1 local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }) local _ret local _moddep # If we are already scheduled to be loaded, no need to check again. [[ " $mods_to_load " == *\ $_mod\ * ]] && return 0 [[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1 # This should never happen, but... [[ -d $_moddir ]] || return 1 [[ $2 ]] || mods_checked_as_dep+=" $_mod " if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then dinfo "dracut module '$_mod' will not be installed, because it's in the list to be omitted!" return 1 fi if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then module_check $_mod 1; ret=$? else module_check $_mod 0; ret=$? fi # explicit module, so also accept ret=255 [[ $ret = 0 || $ret = 255 ]] || return 1 else # module not in our list if [[ $dracutmodules = all ]]; then # check, if we can and should install this module module_check $_mod; ret=$? if [[ $ret != 0 ]]; then [[ $2 ]] && return 1 [[ $ret != 255 ]] && return 1 fi else # skip this module return 1 fi fi for _moddep in $(module_depends $_mod); do # handle deps as if they were manually added [[ " $dracutmodules " == *\ $_mod\ * ]] \ && [[ " $dracutmodules " != *\ $_moddep\ * ]] \ && dracutmodules+=" $_moddep " [[ " $add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \ && add_dracutmodules+=" $_moddep " [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \ && [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \ && force_add_dracutmodules+=" $_moddep " # if a module we depend on fail, fail also if ! check_module $_moddep; then derror "dracut module '$_mod' depends on '$_moddep', which can't be installed" return 1 fi done [[ " $mods_to_load " == *\ $_mod\ * ]] || \ mods_to_load+=" $_mod " return 0 } # for_each_module_dir <func> # execute "<func> <dracut module> 1" for_each_module_dir() { local _modcheck local _mod local _moddir local _func _func=$1 for _moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do [[ -d $_moddir ]] || continue; [[ -e $_moddir/install || -e $_moddir/installkernel || \ -e $_moddir/module-setup.sh ]] || continue _mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]} $_func $_mod 1 done # Report any missing dracut modules, the user has specified _modcheck="$add_dracutmodules $force_add_dracutmodules" [[ $dracutmodules != all ]] && _modcheck="$_modcheck $dracutmodules" for _mod in $_modcheck; do [[ " $mods_to_load " == *\ $_mod\ * ]] && continue [[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \ && [[ " $dracutmodules " != *\ $_mod\ * ]] \ && [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \ && continue derror "dracut module '$_mod' cannot be found or installed." [[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1 [[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1 [[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1 done } # Install a single kernel module along with any firmware it may require. # $1 = full path to kernel module to install install_kmod_with_fw() { # no need to go further if the module is already installed [[ -e "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] \ && return 0 if [[ $omit_drivers ]]; then local _kmod=${1##*/} _kmod=${_kmod%.ko*} _kmod=${_kmod/-/_} if [[ "$_kmod" =~ $omit_drivers ]]; then dinfo "Omitting driver $_kmod" return 0 fi if [[ "${1##*/lib/modules/$kernel/}" =~ $omit_drivers ]]; then dinfo "Omitting driver $_kmod" return 0 fi fi if [[ $silent_omit_drivers ]]; then local _kmod=${1##*/} _kmod=${_kmod%.ko*} _kmod=${_kmod/-/_} [[ "$_kmod" =~ $silent_omit_drivers ]] && return 0 [[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0 fi inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ret=$? (($ret != 0)) && return $ret local _modname=${1##*/} _fwdir _found _fw _modname=${_modname%.ko*} for _fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do _found='' for _fwdir in $fw_dir; do [[ -d $_fwdir && -f $_fwdir/$_fw ]] || continue inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw" _found=yes done if [[ $_found != yes ]]; then if ! [[ -d $(echo /sys/module/${_modname//-/_}|{ read a b; echo $a; }) ]]; then dinfo "Possible missing firmware \"${_fw}\" for kernel module" \ "\"${_modname}.ko\"" else dwarn "Possible missing firmware \"${_fw}\" for kernel module" \ "\"${_modname}.ko\"" fi fi done return 0 } # Do something with all the dependencies of a kernel module. # Note that kernel modules depend on themselves using the technique we use # $1 = function to call for each dependency we find # It will be passed the full path to the found kernel module # $2 = module to get dependencies for # rest of args = arguments to modprobe # _fderr specifies FD passed from surrounding scope for_each_kmod_dep() { local _func=$1 _kmod=$2 _cmd _modpath _options shift 2 modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | ( while read _cmd _modpath _options || [ -n "$_cmd" ]; do [[ $_cmd = insmod ]] || continue $_func ${_modpath} || exit $? done ) } dracut_kernel_post() { for _f in modules.builtin.bin modules.builtin modules.order; do [[ -e $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f" done # generate module dependencies for the initrd if [[ -d $initdir/lib/modules/$kernel ]] && \ ! depmod -a -b "$initdir" $kernel; then dfatal "\"depmod -a $kernel\" failed." exit 1 fi } instmods() { # instmods [-c [-s]] <kernel module> [<kernel module> ... ] # instmods [-c [-s]] <kernel subsystem> # install kernel modules along with all their dependencies. # <kernel subsystem> can be e.g. "=block" or "=drivers/usb/storage" # -c check # -s silent local _optional="-o" local _silent local _ret [[ $no_kernel = yes ]] && return if [[ $1 = '-c' ]]; then unset _optional shift fi if [[ $1 = '-s' ]]; then _silent=1 shift fi if (($# == 0)); then read -r -d '' -a args set -- "${args[@]}" fi if (($# == 0)); then return 0 fi $DRACUT_INSTALL \ ${initdir:+-D "$initdir"} \ ${loginstall:+-L "$loginstall"} \ ${hostonly:+-H} \ ${omit_drivers:+-N "$omit_drivers"} \ ${srcmods:+--kerneldir "$srcmods"} \ ${_optional:+-o} \ ${_silent:+--silent} \ -m "$@" _ret=$? if (($_ret != 0)) && [[ -z "$_silent" ]]; then derror "FAILED: " \ $DRACUT_INSTALL \ ${initdir:+-D "$initdir"} \ ${loginstall:+-L "$loginstall"} \ ${hostonly:+-H} \ ${omit_drivers:+-N "$omit_drivers"} \ ${srcmods:+--kerneldir "$srcmods"} \ ${_optional:+-o} \ ${_silent:+--silent} \ -m "$@" fi [[ "$optional" ]] && return 0 return $_ret } if [[ "$(ln --help)" == *--relative* ]]; then ln_r() { ln -sfnr "${initdir}/$1" "${initdir}/$2" } else ln_r() { local _source=$1 local _dest=$2 [[ -d "${_dest%/*}" ]] && _dest=$(readlink -f "${_dest%/*}")/${_dest##*/} ln -sfn -- "$(convert_abs_rel "${_dest}" "${_source}")" "${initdir}/${_dest}" } fi dracut-logger.sh 0000755 00000031770 15053306611 0007652 0 ustar 00 #!/bin/bash # # logging faciality module for dracut both at build- and boot-time # # Copyright 2010 Amadeusz Żołnowski <aidecoe@aidecoe.name> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. __DRACUT_LOGGER__=1 ## @brief Logging facility module for dracut both at build- and boot-time. # # @section intro Introduction # # The logger takes a bit from Log4j philosophy. There are defined 6 logging # levels: # - TRACE (6) # The TRACE Level designates finer-grained informational events than the # DEBUG. # - DEBUG (5) # The DEBUG Level designates fine-grained informational events that are most # useful to debug an application. # - INFO (4) # The INFO level designates informational messages that highlight the # progress of the application at coarse-grained level. # - WARN (3) # The WARN level designates potentially harmful situations. # - ERROR (2) # The ERROR level designates error events that might still allow the # application to continue running. # - FATAL (1) # The FATAL level designates very severe error events that will presumably # lead the application to abort. # Descriptions are borrowed from Log4j documentation: # http://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/Level.html # # @section usage Usage # # First of all you have to start with dlog_init() function which initializes # required variables. Don't call any other logging function before that one! # If you're ready with this, you can use following functions which corresponds # clearly to levels listed in @ref intro Introduction. Here they are: # - dtrace() # - ddebug() # - dinfo() # - dwarn() # - derror() # - dfatal() # They take all arguments given as a single message to be logged. See dlog() # function for details how it works. Note that you shouldn't use dlog() by # yourself. It's wrapped with above functions. # # @see dlog_init() dlog() # # @section conf Configuration # # Logging is controlled by following global variables: # - @var stdloglvl - logging level to standard error (console output) # - @var sysloglvl - logging level to syslog (by logger command) # - @var fileloglvl - logging level to file # - @var kmsgloglvl - logging level to /dev/kmsg (only for boot-time) # - @var logfile - log file which is used when @var fileloglvl is higher # than 0 # and two global variables: @var maxloglvl and @var syslogfacility which <b>must # not</b> be overwritten. Both are set by dlog_init(). @var maxloglvl holds # maximum logging level of those three and indicates that dlog_init() was run. # @var syslogfacility is set either to 'user' (when building initramfs) or # 'daemon' (when booting). # # Logging level set by the variable means that messages from this logging level # and above (FATAL is the highest) will be shown. Logging levels may be set # independently for each destination (stderr, syslog, file, kmsg). # # @see dlog_init() ## @brief Initializes dracut Logger. # # @retval 1 if something has gone wrong # @retval 0 on success. # # @note This function need to be called before any other from this file. # # If any of the variables is not set, this function set it to default: # - @var stdloglvl = 4 (info) # - @var sysloglvl = 0 (no logging) # - @var fileloglvl is set to 4 when @var logfile is set too, otherwise it's # - @var kmsgloglvl = 0 (no logging) # set to 0 # # @warning Function sets global variables @var maxloglvl and @syslogfacility. # See file doc comment for details. dlog_init() { local __oldumask local ret=0; local errmsg [ -z "$stdloglvl" ] && stdloglvl=4 [ -z "$sysloglvl" ] && sysloglvl=0 [ -z "$kmsgloglvl" ] && kmsgloglvl=0 # Skip initialization if it's already done. [ -n "$maxloglvl" ] && return 0 if [ -z "$fileloglvl" ]; then [ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0 elif (( $fileloglvl > 0 )); then if [[ $logfile ]]; then __oldumask=$(umask) umask 0377 ! [ -e "$logfile" ] && >"$logfile" umask $__oldumask if [ -w "$logfile" -a -f "$logfile" ]; then # Mark new run in the log file echo >>"$logfile" if command -v date >/dev/null; then echo "=== $(date) ===" >>"$logfile" else echo "===============================================" >>"$logfile" fi echo >>"$logfile" else # We cannot log to file, so turn this facility off. fileloglvl=0 ret=1 errmsg="'$logfile' is not a writable file" fi fi fi if (( $UID != 0 )); then kmsgloglvl=0 sysloglvl=0 fi if (( $sysloglvl > 0 )); then if [[ -d /run/systemd/journal ]] \ && type -P systemd-cat &>/dev/null \ && systemctl --quiet is-active systemd-journald.socket &>/dev/null \ && { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then readonly _systemdcatfile="$DRACUT_TMPDIR/systemd-cat" mkfifo "$_systemdcatfile" readonly _dlogfd=15 systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" & exec 15>"$_systemdcatfile" elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then # We cannot log to syslog, so turn this facility off. kmsgloglvl=$sysloglvl sysloglvl=0 ret=1 errmsg="No '/dev/log' or 'logger' included for syslog logging" fi fi if (($sysloglvl > 0)) || (($kmsgloglvl > 0 )); then if [ -n "$dracutbasedir" ]; then readonly syslogfacility=user else readonly syslogfacility=daemon fi export syslogfacility fi local lvl; local maxloglvl_l=0 for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl; do (( $lvl > $maxloglvl_l )) && maxloglvl_l=$lvl done readonly maxloglvl=$maxloglvl_l export maxloglvl if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then unset dtrace dtrace() { :; }; fi if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then unset ddebug ddebug() { :; }; fi if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then unset dinfo dinfo() { :; }; fi if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then unset dwarn dwarn() { :; }; unset dwarning dwarning() { :; }; fi if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then unset derror derror() { :; }; fi if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then unset dfatal dfatal() { :; }; fi [ -n "$errmsg" ] && derror "$errmsg" return $ret } ## @brief Converts numeric logging level to the first letter of level name. # # @param lvl Numeric logging level in range from 1 to 6. # @retval 1 if @a lvl is out of range. # @retval 0 if @a lvl is correct. # @result Echoes first letter of level name. _lvl2char() { case "$1" in 1) echo F;; 2) echo E;; 3) echo W;; 4) echo I;; 5) echo D;; 6) echo T;; *) return 1;; esac } ## @brief Converts numeric level to logger priority defined by POSIX.2. # # @param lvl Numeric logging level in range from 1 to 6. # @retval 1 if @a lvl is out of range. # @retval 0 if @a lvl is correct. # @result Echoes logger priority. _lvl2syspri() { printf $syslogfacility. case "$1" in 1) echo crit;; 2) echo error;; 3) echo warning;; 4) echo info;; 5) echo debug;; 6) echo debug;; *) return 1;; esac } ## @brief Converts dracut-logger numeric level to syslog log level # # @param lvl Numeric logging level in range from 1 to 6. # @retval 1 if @a lvl is out of range. # @retval 0 if @a lvl is correct. # @result Echoes kernel console numeric log level # # Conversion is done as follows: # # <tt> # none -> LOG_EMERG (0) # none -> LOG_ALERT (1) # FATAL(1) -> LOG_CRIT (2) # ERROR(2) -> LOG_ERR (3) # WARN(3) -> LOG_WARNING (4) # none -> LOG_NOTICE (5) # INFO(4) -> LOG_INFO (6) # DEBUG(5) -> LOG_DEBUG (7) # TRACE(6) / # </tt> # # @see /usr/include/sys/syslog.h _dlvl2syslvl() { local lvl case "$1" in 1) lvl=2;; 2) lvl=3;; 3) lvl=4;; 4) lvl=6;; 5) lvl=7;; 6) lvl=7;; *) return 1;; esac [ "$syslogfacility" = user ] && echo $((8+$lvl)) || echo $((24+$lvl)) } ## @brief Prints to stderr and/or writes to file, to syslog and/or /dev/kmsg # given message with given level (priority). # # @param lvl Numeric logging level. # @param msg Message. # @retval 0 It's always returned, even if logging failed. # # @note This function is not supposed to be called manually. Please use # dtrace(), ddebug(), or others instead which wrap this one. # # This is core logging function which logs given message to standard error, file # and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg. # The format is following: # # <tt>X: some message</tt> # # where @c X is the first letter of logging level. See module description for # details on that. # # Message to syslog is sent with tag @c dracut. Priorities are mapped as # following: # - @c FATAL to @c crit # - @c ERROR to @c error # - @c WARN to @c warning # - @c INFO to @c info # - @c DEBUG and @c TRACE both to @c debug _do_dlog() { local lvl="$1"; shift local lvlc=$(_lvl2char "$lvl") || return 0 local msg="$*" local lmsg="$lvlc: $*" (( $lvl <= $stdloglvl )) && printf -- 'dracut: %s\n' "$msg" >&2 if (( $lvl <= $sysloglvl )); then if [[ "$_dlogfd" ]]; then printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd else logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg" fi fi if (( $lvl <= $fileloglvl )) && [[ -w "$logfile" ]] && [[ -f "$logfile" ]]; then echo "$lmsg" >>"$logfile" fi (( $lvl <= $kmsgloglvl )) && \ echo "<$(_dlvl2syslvl $lvl)>dracut[$$] $msg" >/dev/kmsg } ## @brief Internal helper function for _do_dlog() # # @param lvl Numeric logging level. # @param msg Message. # @retval 0 It's always returned, even if logging failed. # # @note This function is not supposed to be called manually. Please use # dtrace(), ddebug(), or others instead which wrap this one. # # This function calls _do_dlog() either with parameter msg, or if # none is given, it will read standard input and will use every line as # a message. # # This enables: # dwarn "This is a warning" # echo "This is a warning" | dwarn dlog() { [ -z "$maxloglvl" ] && return 0 (( $1 <= $maxloglvl )) || return 0 if (( $# > 1 )); then _do_dlog "$@" else while read line || [ -n "$line" ]; do _do_dlog "$1" "$line" done fi } ## @brief Logs message at TRACE level (6) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dtrace() { set +x dlog 6 "$@" [ -n "$debug" ] && set -x || : } ## @brief Logs message at DEBUG level (5) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. ddebug() { set +x dlog 5 "$@" [ -n "$debug" ] && set -x || : } ## @brief Logs message at INFO level (4) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dinfo() { set +x dlog 4 "$@" [ -n "$debug" ] && set -x || : } ## @brief Logs message at WARN level (3) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dwarn() { set +x dlog 3 "$@" [ -n "$debug" ] && set -x || : } ## @brief It's an alias to dwarn() function. # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dwarning() { set +x dwarn "$@" [ -n "$debug" ] && set -x || : } ## @brief Logs message at ERROR level (2) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. derror() { set +x dlog 2 "$@" [ -n "$debug" ] && set -x || : } ## @brief Logs message at FATAL level (1) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dfatal() { set +x dlog 1 "$@" [ -n "$debug" ] && set -x || : } dracut-version.sh 0000644 00000000052 15053306611 0010042 0 ustar 00 DRACUT_VERSION=049-237.git20250603.el8_10 dracut-functions.sh 0000755 00000052214 15053306611 0010377 0 ustar 00 #!/bin/bash # # functions used by dracut and other tools. # # Copyright 2005-2009 Red Hat, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # export LC_MESSAGES=C # is_func <command> # Check whether $1 is a function. is_func() { [[ "$(type -t "$1")" = "function" ]] } # Generic substring function. If $2 is in $1, return 0. strstr() { [[ $1 = *"$2"* ]]; } # Generic glob matching function. If glob pattern $2 matches anywhere in $1, OK strglobin() { [[ $1 = *$2* ]]; } # Generic glob matching function. If glob pattern $2 matches all of $1, OK strglob() { [[ $1 = $2 ]]; } # returns OK if $1 contains literal string $2 at the beginning, and isn't empty str_starts() { [ "${1#"$2"*}" != "$1" ]; } # returns OK if $1 contains literal string $2 at the end, and isn't empty str_ends() { [ "${1%*"$2"}" != "$1" ]; } # find a binary. If we were not passed the full path directly, # search in the usual places to find the binary. find_binary() { if [[ -z ${1##/*} ]]; then if [[ -x $1 ]] || { [[ "$1" == *.so* ]] && ldd "$1" &>/dev/null; }; then printf "%s\n" "$1" return 0 fi fi type -P "${1##*/}" } ldconfig_paths() { ldconfig -pN 2>/dev/null | grep -E -v '/(lib|lib64|usr/lib|usr/lib64)/[^/]*$' | sed -n 's,.* => \(.*\)/.*,\1,p' | sort | uniq } # Version comparision function. Assumes Linux style version scheme. # $1 = version a # $2 = comparision op (gt, ge, eq, le, lt, ne) # $3 = version b vercmp() { local _n1=(${1//./ }) _op=$2 _n2=(${3//./ }) _i _res for ((_i=0; ; _i++)) do if [[ ! ${_n1[_i]}${_n2[_i]} ]]; then _res=0 elif ((${_n1[_i]:-0} > ${_n2[_i]:-0})); then _res=1 elif ((${_n1[_i]:-0} < ${_n2[_i]:-0})); then _res=2 else continue fi break done case $_op in gt) ((_res == 1));; ge) ((_res != 2));; eq) ((_res == 0));; le) ((_res != 1));; lt) ((_res == 2));; ne) ((_res != 0));; esac } # Create all subdirectories for given path without creating the last element. # $1 = path mksubdirs() { [[ -e ${1%/*} ]] || mkdir -m 0755 -p -- "${1%/*}" } # Function prints global variables in format name=value line by line. # $@ = list of global variables' name print_vars() { local _var _value for _var in "$@" do eval printf -v _value "%s" \""\$$_var"\" [[ ${_value} ]] && printf '%s="%s"\n' "$_var" "$_value" done } # normalize_path <path> # Prints the normalized path, where it removes any duplicated # and trailing slashes. # Example: # $ normalize_path ///test/test// # /test/test normalize_path() { shopt -q -s extglob set -- "${1//+(\/)//}" shopt -q -u extglob printf "%s\n" "${1%/}" } # convert_abs_rel <from> <to> # Prints the relative path, when creating a symlink to <to> from <from>. # Example: # $ convert_abs_rel /usr/bin/test /bin/test-2 # ../../bin/test-2 # $ ln -s $(convert_abs_rel /usr/bin/test /bin/test-2) /usr/bin/test convert_abs_rel() { local __current __absolute __abssize __cursize __newpath local -i __i __level set -- "$(normalize_path "$1")" "$(normalize_path "$2")" # corner case #1 - self looping link [[ "$1" == "$2" ]] && { printf "%s\n" "${1##*/}"; return; } # corner case #2 - own dir link [[ "${1%/*}" == "$2" ]] && { printf ".\n"; return; } IFS="/" __current=($1) IFS="/" __absolute=($2) __abssize=${#__absolute[@]} __cursize=${#__current[@]} while [[ "${__absolute[__level]}" == "${__current[__level]}" ]] do (( __level++ )) if (( __level > __abssize || __level > __cursize )) then break fi done for ((__i = __level; __i < __cursize-1; __i++)) do if ((__i > __level)) then __newpath=$__newpath"/" fi __newpath=$__newpath".." done for ((__i = __level; __i < __abssize; __i++)) do if [[ -n $__newpath ]] then __newpath=$__newpath"/" fi __newpath=$__newpath${__absolute[__i]} done printf "%s\n" "$__newpath" } # get_fs_env <device> # Get and the ID_FS_TYPE variable from udev for a device. # Example: # $ get_fs_env /dev/sda2 # ext4 get_fs_env() { local evalstr local found [[ $1 ]] || return unset ID_FS_TYPE ID_FS_TYPE=$(blkid -u filesystem -o export -- "$1" \ | while read line || [ -n "$line" ]; do if [[ "$line" == TYPE\=* ]]; then printf "%s" "${line#TYPE=}"; exit 0; fi done) if [[ $ID_FS_TYPE ]]; then printf "%s" "$ID_FS_TYPE" return 0 fi return 1 } # get_maj_min <device> # Prints the major and minor of a device node. # Example: # $ get_maj_min /dev/sda2 # 8:2 get_maj_min() { local _majmin local _out if [[ $get_maj_min_cache_file ]]; then _out="$(grep -m1 -oP "^$1 \K\S+$" "$get_maj_min_cache_file")" fi if ! [[ "$_out" ]]; then _majmin="$(stat -L -c '%t:%T' "$1" 2>/dev/null)" _out="$(printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))")" if [[ $get_maj_min_cache_file ]]; then echo "$1 $_out" >> "$get_maj_min_cache_file" fi fi echo -n "$_out" } # get_devpath_block <device> # get the DEVPATH in /sys of a block device get_devpath_block() { local _majmin _i _majmin=$(get_maj_min "$1") for _i in /sys/block/*/dev /sys/block/*/*/dev; do [[ -e "$_i" ]] || continue if [[ "$_majmin" == "$(<"$_i")" ]]; then printf "%s" "${_i%/dev}" return 0 fi done return 1 } # get a persistent path from a device get_persistent_dev() { local i _tmp _dev _pol _dev=$(get_maj_min "$1") [ -z "$_dev" ] && return if [[ -n "$persistent_policy" ]]; then _pol="/dev/disk/${persistent_policy}/*" else _pol= fi for i in \ $_pol \ /dev/mapper/* \ /dev/disk/by-uuid/* \ /dev/disk/by-label/* \ /dev/disk/by-partuuid/* \ /dev/disk/by-partlabel/* \ /dev/disk/by-id/* \ /dev/disk/by-path/* \ ; do [[ -e "$i" ]] || continue [[ $i == /dev/mapper/control ]] && continue [[ $i == /dev/mapper/mpath* ]] && continue _tmp=$(get_maj_min "$i") if [ "$_tmp" = "$_dev" ]; then printf -- "%s" "$i" return fi done printf -- "%s" "$1" } expand_persistent_dev() { local _dev=$1 case "$_dev" in LABEL=*) _dev="/dev/disk/by-label/${_dev#LABEL=}" ;; UUID=*) _dev="${_dev#UUID=}" _dev="${_dev,,}" _dev="/dev/disk/by-uuid/${_dev}" ;; PARTUUID=*) _dev="${_dev#PARTUUID=}" _dev="${_dev,,}" _dev="/dev/disk/by-partuuid/${_dev}" ;; PARTLABEL=*) _dev="/dev/disk/by-partlabel/${_dev#PARTLABEL=}" ;; esac printf "%s" "$_dev" } shorten_persistent_dev() { local _dev="$1" case "$_dev" in /dev/disk/by-uuid/*) printf "%s" "UUID=${_dev##*/}";; /dev/disk/by-label/*) printf "%s" "LABEL=${_dev##*/}";; /dev/disk/by-partuuid/*) printf "%s" "PARTUUID=${_dev##*/}";; /dev/disk/by-partlabel/*) printf "%s" "PARTLABEL=${_dev##*/}";; *) printf "%s" "$_dev";; esac } # find_block_device <mountpoint> # Prints the major and minor number of the block device # for a given mountpoint. # Unless $use_fstab is set to "yes" the functions # uses /proc/self/mountinfo as the primary source of the # information and only falls back to /etc/fstab, if the mountpoint # is not found there. # Example: # $ find_block_device /usr # 8:4 find_block_device() { local _dev _majmin _find_mpt _find_mpt="$1" if [[ $use_fstab != yes ]]; then [[ -d $_find_mpt/. ]] findmnt -e -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \ while read _majmin _dev || [ -n "$_dev" ]; do if [[ -b $_dev ]]; then if ! [[ $_majmin ]] || [[ $_majmin == 0:* ]]; then _majmin=$(get_maj_min $_dev) fi if [[ $_majmin ]]; then printf "%s\n" "$_majmin" else printf "%s\n" "$_dev" fi return 0 fi if [[ $_dev = *:* ]]; then printf "%s\n" "$_dev" return 0 fi done; return 1; } && return 0 fi # fall back to /etc/fstab findmnt -e --fstab -v -n -o 'MAJ:MIN,SOURCE' --target "$_find_mpt" | { \ while read _majmin _dev || [ -n "$_dev" ]; do if ! [[ $_dev ]]; then _dev="$_majmin" unset _majmin fi if [[ -b $_dev ]]; then [[ $_majmin ]] || _majmin=$(get_maj_min $_dev) if [[ $_majmin ]]; then printf "%s\n" "$_majmin" else printf "%s\n" "$_dev" fi return 0 fi if [[ $_dev = *:* ]]; then printf "%s\n" "$_dev" return 0 fi done; return 1; } && return 0 return 1 } # find_mp_fstype <mountpoint> # Echo the filesystem type for a given mountpoint. # /proc/self/mountinfo is taken as the primary source of information # and /etc/fstab is used as a fallback. # No newline is appended! # Example: # $ find_mp_fstype /;echo # ext4 find_mp_fstype() { local _fs if [[ $use_fstab != yes ]]; then findmnt -e -v -n -o 'FSTYPE' --target "$1" | { \ while read _fs || [ -n "$_fs" ]; do [[ $_fs ]] || continue [[ $_fs = "autofs" ]] && continue printf "%s" "$_fs" return 0 done; return 1; } && return 0 fi findmnt --fstab -e -v -n -o 'FSTYPE' --target "$1" | { \ while read _fs || [ -n "$_fs" ]; do [[ $_fs ]] || continue [[ $_fs = "autofs" ]] && continue printf "%s" "$_fs" return 0 done; return 1; } && return 0 return 1 } # find_dev_fstype <device> # Echo the filesystem type for a given device. # /proc/self/mountinfo is taken as the primary source of information # and /etc/fstab is used as a fallback. # No newline is appended! # Example: # $ find_dev_fstype /dev/sda2;echo # ext4 find_dev_fstype() { local _find_dev _fs _find_dev="$1" if ! [[ "$_find_dev" = /dev* ]]; then [[ -b "/dev/block/$_find_dev" ]] && _find_dev="/dev/block/$_find_dev" fi if [[ $use_fstab != yes ]]; then findmnt -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \ while read _fs || [ -n "$_fs" ]; do [[ $_fs ]] || continue [[ $_fs = "autofs" ]] && continue printf "%s" "$_fs" return 0 done; return 1; } && return 0 fi findmnt --fstab -e -v -n -o 'FSTYPE' --source "$_find_dev" | { \ while read _fs || [ -n "$_fs" ]; do [[ $_fs ]] || continue [[ $_fs = "autofs" ]] && continue printf "%s" "$_fs" return 0 done; return 1; } && return 0 return 1 } # find_mp_fsopts <mountpoint> # Echo the filesystem options for a given mountpoint. # /proc/self/mountinfo is taken as the primary source of information # and /etc/fstab is used as a fallback. # No newline is appended! # Example: # $ find_mp_fsopts /;echo # rw,relatime,discard,data=ordered find_mp_fsopts() { if [[ $use_fstab != yes ]]; then findmnt -e -v -n -o 'OPTIONS' --target "$1" 2>/dev/null && return 0 fi findmnt --fstab -e -v -n -o 'OPTIONS' --target "$1" } # find_dev_fsopts <device> # Echo the filesystem options for a given device. # /proc/self/mountinfo is taken as the primary source of information # and /etc/fstab is used as a fallback. # Example: # $ find_dev_fsopts /dev/sda2 # rw,relatime,discard,data=ordered find_dev_fsopts() { local _find_dev _opts _find_dev="$1" if ! [[ "$_find_dev" = /dev* ]]; then [[ -b "/dev/block/$_find_dev" ]] && _find_dev="/dev/block/$_find_dev" fi if [[ $use_fstab != yes ]]; then findmnt -e -v -n -o 'OPTIONS' --source "$_find_dev" 2>/dev/null && return 0 fi findmnt --fstab -e -v -n -o 'OPTIONS' --source "$_find_dev" } # finds the major:minor of the block device backing the root filesystem. find_root_block_device() { find_block_device /; } # for_each_host_dev_fs <func> # Execute "<func> <dev> <filesystem>" for every "<dev> <fs>" pair found # in ${host_fs_types[@]} for_each_host_dev_fs() { local _func="$1" local _dev local _ret=1 [[ "${#host_fs_types[@]}" ]] || return 2 for _dev in "${!host_fs_types[@]}"; do $_func "$_dev" "${host_fs_types[$_dev]}" && _ret=0 done return $_ret } host_fs_all() { printf "%s\n" "${host_fs_types[@]}" } # Walk all the slave relationships for a given block device. # Stop when our helper function returns success # $1 = function to call on every found block device # $2 = block device in major:minor format check_block_and_slaves() { local _x [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry. if ! lvm_internal_dev $2; then "$1" $2 && return; fi check_vol_slaves "$@" && return 0 if [[ -f /sys/dev/block/$2/../dev ]] && [[ /sys/dev/block/$2/../subsystem -ef /sys/class/block ]]; then check_block_and_slaves $1 $(<"/sys/dev/block/$2/../dev") && return 0 fi [[ -d /sys/dev/block/$2/slaves ]] || return 1 for _x in /sys/dev/block/$2/slaves/*; do [[ -f $_x/dev ]] || continue [[ $_x/subsystem -ef /sys/class/block ]] || continue check_block_and_slaves $1 $(<"$_x/dev") && return 0 done return 1 } check_block_and_slaves_all() { local _x _ret=1 [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry. if ! lvm_internal_dev $2 && "$1" $2; then _ret=0 fi check_vol_slaves_all "$@" && return 0 if [[ -f /sys/dev/block/$2/../dev ]] && [[ /sys/dev/block/$2/../subsystem -ef /sys/class/block ]]; then check_block_and_slaves_all $1 $(<"/sys/dev/block/$2/../dev") && _ret=0 fi [[ -d /sys/dev/block/$2/slaves ]] || return 1 for _x in /sys/dev/block/$2/slaves/*; do [[ -f $_x/dev ]] || continue [[ $_x/subsystem -ef /sys/class/block ]] || continue check_block_and_slaves_all $1 $(<"$_x/dev") && _ret=0 done return $_ret } # for_each_host_dev_and_slaves <func> # Execute "<func> <dev>" for every "<dev>" found # in ${host_devs[@]} and their slaves for_each_host_dev_and_slaves_all() { local _func="$1" local _dev local _ret=1 [[ "${host_devs[@]}" ]] || return 2 for _dev in "${host_devs[@]}"; do [[ -b "$_dev" ]] || continue if check_block_and_slaves_all $_func $(get_maj_min $_dev); then _ret=0 fi done return $_ret } for_each_host_dev_and_slaves() { local _func="$1" local _dev [[ "${host_devs[@]}" ]] || return 2 for _dev in "${host_devs[@]}"; do [[ -b "$_dev" ]] || continue check_block_and_slaves $_func $(get_maj_min $_dev) && return 0 done return 1 } # ugly workaround for the lvm design # There is no volume group device, # so, there are no slave devices for volume groups. # Logical volumes only have the slave devices they really live on, # but you cannot create the logical volume without the volume group. # And the volume group might be bigger than the devices the LV needs. check_vol_slaves() { local _lv _vg _pv _dm _majmin _majmin="$2" _lv="/dev/block/$_majmin" _dm=/sys/dev/block/$_majmin/dm [[ -f $_dm/uuid && $(<$_dm/uuid) =~ LVM-* ]] || return 1 _vg=$(dmsetup splitname --noheadings -o vg_name $(<"$_dm/name") ) # strip space _vg="${_vg//[[:space:]]/}" if [[ $_vg ]]; then for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null) do check_block_and_slaves $1 $(get_maj_min $_pv) && return 0 done fi return 1 } check_vol_slaves_all() { local _lv _vg _pv _majmin _majmin="$2" _lv="/dev/block/$_majmin" _dm="/sys/dev/block/$_majmin/dm" [[ -f $_dm/uuid && $(<$_dm/uuid) =~ LVM-* ]] || return 1 _vg=$(dmsetup splitname --noheadings -o vg_name $(<"$_dm/name") ) # strip space _vg="${_vg//[[:space:]]/}" if [[ $_vg ]]; then for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null) do check_block_and_slaves_all $1 $(get_maj_min $_pv) done return 0 fi return 1 } # fs_get_option <filesystem options> <search for option> # search for a specific option in a bunch of filesystem options # and return the value fs_get_option() { local _fsopts=$1 local _option=$2 local OLDIFS="$IFS" IFS=, set -- $_fsopts IFS="$OLDIFS" while [ $# -gt 0 ]; do case $1 in $_option=*) echo ${1#${_option}=} break esac shift done } check_kernel_config() { local _config_opt="$1" local _config_file [[ -f /boot/config-$kernel ]] \ && _config_file="/boot/config-$kernel" [[ -f /lib/modules/$kernel/config ]] \ && _config_file="/lib/modules/$kernel/config" # no kernel config file, so return true [[ $_config_file ]] || return 0 grep -q -F "${_config_opt}=" "$_config_file" && return 0 return 1 } # get_cpu_vendor # Only two values are returned: AMD or Intel get_cpu_vendor () { if grep -qE AMD /proc/cpuinfo; then printf "AMD" fi if grep -qE Intel /proc/cpuinfo; then printf "Intel" fi } # get_host_ucode # Get the hosts' ucode file based on the /proc/cpuinfo get_ucode_file () { local family=`grep -E "cpu family" /proc/cpuinfo | head -1 | sed s/.*:\ //` local model=`grep -E "model" /proc/cpuinfo |grep -v name | head -1 | sed s/.*:\ //` local stepping=`grep -E "stepping" /proc/cpuinfo | head -1 | sed s/.*:\ //` if [[ "$(get_cpu_vendor)" == "AMD" ]]; then if [[ $family -ge 21 ]]; then printf "microcode_amd_fam%xh.bin" $family else printf "microcode_amd.bin" fi fi if [[ "$(get_cpu_vendor)" == "Intel" ]]; then # The /proc/cpuinfo are in decimal. printf "%02x-%02x-%02x" ${family} ${model} ${stepping} fi } # Get currently loaded modules # sorted, and delimited by newline get_loaded_kernel_modules () { local modules=( ) while read _module _size _used _used_by; do modules+=( "$_module" ) done <<< "$(lsmod | sed -n '1!p')" printf '%s\n' "${modules[@]}" | sort } # Not every device in /dev/mapper should be examined. # If it is an LVM device, touch only devices which have /dev/VG/LV symlink. lvm_internal_dev() { local dev_dm_dir=/sys/dev/block/$1/dm [[ ! -f $dev_dm_dir/uuid || $(<$dev_dm_dir/uuid) != LVM-* ]] && return 1 # Not an LVM device local DM_VG_NAME DM_LV_NAME DM_LV_LAYER eval $(dmsetup splitname --nameprefixes --noheadings --rows "$(<$dev_dm_dir/name)" 2>/dev/null) [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 0 # Better skip this! [[ ${DM_LV_LAYER} ]] || [[ ! -L /dev/${DM_VG_NAME}/${DM_LV_NAME} ]] } btrfs_devs() { local _mp="$1" btrfs device usage "$_mp" \ | while read _dev _rest; do str_starts "$_dev" "/" || continue _dev=${_dev%,} printf -- "%s\n" "$_dev" done } # block_is_nbd <maj:min> # Check whether $1 is an nbd device block_is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] } # block_is_iscsi <maj:min> # Check whether $1 is an nbd device block_is_iscsi() { local _dir local _dev=$1 [[ -L "/sys/dev/block/$_dev" ]] || return _dir="$(readlink -f "/sys/dev/block/$_dev")" || return until [[ -d "$_dir/sys" || -d "$_dir/iscsi_session" ]]; do _dir="$_dir/.." done [[ -d "$_dir/iscsi_session" ]] } # block_is_fcoe <maj:min> # Check whether $1 is an FCoE device # Will not work for HBAs that hide the ethernet aspect # completely and present a pure FC device block_is_fcoe() { local _dir local _dev=$1 [[ -L "/sys/dev/block/$_dev" ]] || return _dir="$(readlink -f "/sys/dev/block/$_dev")" until [[ -d "$_dir/sys" ]]; do _dir="$_dir/.." if [[ -d "$_dir/subsystem" ]]; then subsystem=$(basename $(readlink $_dir/subsystem)) [[ $subsystem == "fcoe" ]] && return 0 fi done return 1 } # block_is_netdevice <maj:min> # Check whether $1 is a net device block_is_netdevice() { block_is_nbd "$1" || block_is_iscsi "$1" || block_is_fcoe "$1" } modules.d/90kernel-network-modules/module-setup.sh 0000755 00000002614 15053306611 0016211 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { return 0 } # called by dracut installkernel() { # Include wired net drivers, excluding wireless local _arch=$(uname -m) local _net_symbols='eth_type_trans|register_virtio_device|usbnet_open' local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/' local _net_drivers if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/s390/net" fi if [[ $hostonly_mode == 'strict' ]] && [[ -n ${hostonly_nics+x} ]]; then for _nic in $hostonly_nics; do _net_drivers=$(get_dev_module /sys/class/net/$_nic) if ! [[ $_net_drivers ]]; then derror "--hostonly-nics contains invalid NIC '$_nic'" continue fi hostonly="" instmods $_net_drivers done return 0 fi dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/net" #instmods() will take care of hostonly instmods \ =drivers/net/phy \ =drivers/net/team \ =drivers/net/ethernet \ ecb arc4 bridge stp llc ipv6 bonding 8021q ipvlan macvlan af_packet virtio_net xennet hostonly="" instmods iscsi_ibft crc32c iscsi_boot_sysfs } # called by dracut install() { return 0 } modules.d/90mdraid/mdraid-cleanup.sh 0000755 00000000755 15053306611 0013302 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh containers="" for md in /dev/md[0-9_]*; do [ -b "$md" ] || continue udevinfo="$(udevadm info --query=env --name=$md)" strstr "$udevinfo" "DEVTYPE=partition" && continue if strstr "$udevinfo" "MD_LEVEL=container"; then containers="$containers $md" continue fi mdadm -S "$md" >/dev/null 2>&1 done for md in $containers; do mdadm -S "$md" >/dev/null 2>&1 done unset containers udevinfo modules.d/90mdraid/mdraid-waitclean.sh 0000755 00000001263 15053306611 0013615 0 ustar 00 #!/bin/sh if getargbool 0 rd.md.waitclean; then type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh containers="" for md in /dev/md[0-9_]*; do [ -b "$md" ] || continue udevinfo="$(udevadm info --query=env --name=$md)" strstr "$udevinfo" "DEVTYPE=partition" && continue if strstr "$udevinfo" "MD_LEVEL=container"; then containers="$containers $md" continue fi info "Waiting for $md to become clean" mdadm -W "$md" >/dev/null 2>&1 done for md in $containers; do info "Waiting for $md to become clean" mdadm -W "$md" >/dev/null 2>&1 done unset containers udevinfo fi modules.d/90mdraid/59-persistent-storage-md.rules 0000644 00000001512 15053306611 0015615 0 ustar 00 SUBSYSTEM!="block", GOTO="md_end" ACTION!="add|change", GOTO="md_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_end" KERNEL!="md[0-9]*|md_d[0-9]*|md/*", KERNEL!="md*", GOTO="md_end" # partitions have no md/{array_state,metadata_version} ENV{DEVTYPE}=="partition", GOTO="md_ignore_state" # container devices have a metadata version of e.g. 'external:ddf' and # never leave state 'inactive' ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state" TEST!="md/array_state", GOTO="md_end" ATTR{md/array_state}=="|clear|inactive", GOTO="md_end" LABEL="md_ignore_state" IMPORT{program}="/sbin/mdadm --detail --export $tempnode" IMPORT BLKID OPTIONS+="link_priority=100" OPTIONS+="watch" OPTIONS+="db_persist" LABEL="md_end" modules.d/90mdraid/mdraid-needshutdown.sh 0000755 00000000233 15053306611 0014351 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh for md in /dev/md[0-9_]*; do [ -b "$md" ] || continue need_shutdown break done modules.d/90mdraid/md-noimsm.sh 0000755 00000000132 15053306611 0012302 0 ustar 00 #!/bin/sh info "rd.md.imsm=0: no MD RAID for imsm/isw raids" udevproperty rd_NO_MDIMSM=1 modules.d/90mdraid/md-shutdown.sh 0000755 00000000711 15053306611 0012656 0 ustar 00 #!/bin/sh _do_md_shutdown() { local ret local final=$1 info "Waiting for mdraid devices to be clean." mdadm -vv --wait-clean --scan| vinfo ret=$? info "Disassembling mdraid devices." mdadm -vv --stop --scan | vinfo ret=$(($ret+$?)) if [ "x$final" != "x" ]; then info "/proc/mdstat:" vinfo < /proc/mdstat fi return $ret } if command -v mdadm >/dev/null; then _do_md_shutdown $1 else : fi modules.d/90mdraid/mdmon-pre-shutdown.sh 0000755 00000000345 15053306611 0014157 0 ustar 00 #!/bin/sh _do_mdmon_takeover() { local ret mdmon --takeover --all ret=$? [ $ret -eq 0 ] && info "Taking over mdmon processes." return $ret } if command -v mdmon >/dev/null; then _do_mdmon_takeover $1 fi modules.d/90mdraid/mdmon-pre-udev.sh 0000755 00000000202 15053306611 0013237 0 ustar 00 #!/bin/sh # save state dir for mdmon/mdadm for the real root [ -d /run/mdadm ] || mkdir -m 0755 /run/mdadm # backward compat link modules.d/90mdraid/65-md-incremental-imsm.rules 0000644 00000002657 15053306611 0015227 0 ustar 00 # This file causes block devices with Linux RAID (mdadm) signatures to # automatically cause mdadm to be run. # See udev(8) for syntax ACTION!="add|change", GOTO="md_end" SUBSYSTEM!="block", GOTO="md_end" ENV{rd_NO_MD}=="?*", GOTO="md_end" KERNEL=="md*", ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end" KERNEL=="md*", ACTION!="change", GOTO="md_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_end" ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_try" GOTO="md_end" LABEL="md_try" ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}=="?*", GOTO="md_end" ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}=="?*", GOTO="md_end" # already done ? PROGRAM="/bin/sh -c 'for i in $sys/$devpath/holders/md[0-9_]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \ GOTO="md_end" # for native arrays - array's uuid has to be specified # for containers - container's uuid has to be specified # TODO : how to get embedded array's uuid having container's component ? # # UUID CHECK ENV{DEVTYPE}!="partition", \ RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}" RUN+="/sbin/initqueue --timeout --name 50-mdraid_start --onetime --unique /sbin/mdraid_start" # # Incrementally build the md array; this will automatically assemble # any eventual containers as well (imsm, ddf) # LABEL="md_incremental" RUN+="/sbin/mdadm -I $env{DEVNAME}" LABEL="md_end" modules.d/90mdraid/md-noddf.sh 0000755 00000000130 15053306611 0012070 0 ustar 00 #!/bin/sh info "rd.md.ddf=0: no MD RAID for SNIA ddf raids" udevproperty rd_NO_MDDDF=1 modules.d/90mdraid/mdraid_start.sh 0000755 00000003447 15053306611 0013073 0 ustar 00 #!/bin/sh type getargs >/dev/null 2>&1 || . /lib/dracut-lib.sh _md_start() { local _udevinfo local _path_s local _path_d local _md="$1" _udevinfo="$(udevadm info --query=env --name="${_md}")" strstr "$_udevinfo" "MD_LEVEL=container" && continue strstr "$_udevinfo" "DEVTYPE=partition" && continue _path_s="/sys/$(udevadm info -q path -n "${_md}")/md/array_state" [ ! -r "$_path_s" ] && continue # inactive ? [ "$(cat "$_path_s")" != "inactive" ] && continue mdadm -R "${_md}" 2>&1 | vinfo # still inactive ? [ "$(cat "$_path_s")" = "inactive" ] && continue _path_d="${_path_s%/*}/degraded" [ ! -r "$_path_d" ] && continue > $hookdir/initqueue/work } _md_force_run() { local _md local _UUID local _MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=) [ -n "$_MD_UUID" ] || getargbool 0 rd.auto || return if [ -n "$_MD_UUID" ]; then _MD_UUID=$(str_replace "$_MD_UUID" "-" "") _MD_UUID=$(str_replace "$_MD_UUID" ":" "") for _md in /dev/md[0-9_]*; do [ -b "$_md" ] || continue _UUID=$( /sbin/mdadm -D --export "$_md" \ | while read line || [ -n "$line" ]; do str_starts "$line" "MD_UUID=" || continue printf "%s" "${line#MD_UUID=}" done ) [ -z "$_UUID" ] && continue _UUID=$(str_replace "$_UUID" ":" "") # check if we should handle this device strstr " $_MD_UUID " " $_UUID " || continue _md_start "${_md}" done else # try to force-run anything not running yet for _md in /dev/md[0-9_]*; do [ -b "$_md" ] || continue _md_start "${_md}" done fi } _md_force_run modules.d/90mdraid/module-setup.sh 0000755 00000011077 15053306611 0013037 0 ustar 00 #!/bin/bash # called by dracut check() { local _rootdev # No mdadm? No mdraid support. require_binaries mdadm expr || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for dev in "${!host_fs_types[@]}"; do [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue DEVPATH=$(get_devpath_block "$dev") for holder in "$DEVPATH"/holders/*; do [[ -e "$holder" ]] || continue [[ -e "$holder/md" ]] && return 0 break done done return 255 } return 0 } # called by dracut depends() { echo rootfs-block return 0 } # called by dracut installkernel() { instmods =drivers/md } # called by dracut cmdline() { local _activated dev line UUID declare -A _activated for dev in "${!host_fs_types[@]}"; do [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue UUID=$( /sbin/mdadm --examine --export $dev \ | while read line || [ -n "$line" ]; do [[ ${line#MD_UUID=} = $line ]] && continue printf "%s" "${line#MD_UUID=} " done ) [[ -z "$UUID" ]] && continue if ! [[ ${_activated[${UUID}]} ]]; then printf "%s" " rd.md.uuid=${UUID}" _activated["${UUID}"]=1 fi done } # called by dracut install() { local rule rule_path inst_multiple cat expr inst_multiple -o mdmon inst $(command -v partx) /sbin/partx inst $(command -v mdadm) /sbin/mdadm if [[ $hostonly_cmdline == "yes" ]]; then local _raidconf=$(cmdline) [[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90mdraid.conf" fi # <mdadm-3.3 udev rule inst_rules 64-md-raid.rules # >=mdadm-3.3 udev rules inst_rules 63-md-raid-arrays.rules 64-md-raid-assembly.rules # remove incremental assembly from stock rules, so they don't shadow # 65-md-inc*.rules and its fine-grained controls, or cause other problems # when we explicitly don't want certain components to be incrementally # assembled for rule in 64-md-raid.rules 64-md-raid-assembly.rules; do rule_path="${initdir}${udevdir}/rules.d/${rule}" [ -f "${rule_path}" ] && sed -i -r \ -e '/(RUN|IMPORT\{program\})\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(--export )?(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \ "${rule_path}" done inst_rules "$moddir/65-md-incremental-imsm.rules" inst_rules "$moddir/59-persistent-storage-md.rules" prepare_udev_rules 59-persistent-storage-md.rules # guard against pre-3.0 mdadm versions, that can't handle containers if ! mdadm -Q -e imsm /dev/null >/dev/null 2>&1; then inst_hook pre-trigger 30 "$moddir/md-noimsm.sh" fi if ! mdadm -Q -e ddf /dev/null >/dev/null 2>&1; then inst_hook pre-trigger 30 "$moddir/md-noddf.sh" fi if [[ $hostonly ]] || [[ $mdadmconf = "yes" ]]; then if [ -f /etc/mdadm.conf ]; then inst -H /etc/mdadm.conf else [ -f /etc/mdadm/mdadm.conf ] && inst -H /etc/mdadm/mdadm.conf /etc/mdadm.conf fi if [ -d /etc/mdadm.conf.d ]; then local f inst_dir /etc/mdadm.conf.d for f in /etc/mdadm.conf.d/*.conf; do [ -f "$f" ] || continue inst -H "$f" done fi fi inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh" inst_hook pre-trigger 30 "$moddir/parse-md.sh" inst_hook pre-mount 10 "$moddir/mdraid-waitclean.sh" inst_hook cleanup 99 "$moddir/mdraid-needshutdown.sh" inst_hook shutdown 30 "$moddir/md-shutdown.sh" inst_script "$moddir/mdraid-cleanup.sh" /sbin/mdraid-cleanup inst_script "$moddir/mdraid_start.sh" /sbin/mdraid_start if dracut_module_included "systemd"; then if [ -e $systemdsystemunitdir/mdmon@.service ]; then inst_simple $systemdsystemunitdir/mdmon@.service fi if [ -e $systemdsystemunitdir/mdadm-last-resort@.service ]; then inst_simple $systemdsystemunitdir/mdadm-last-resort@.service fi if [ -e $systemdsystemunitdir/mdadm-last-resort@.timer ]; then inst_simple $systemdsystemunitdir/mdadm-last-resort@.timer fi if [ -e $dracutsysrootdir$systemdsystemunitdir/mdadm-grow-continue@.service ]; then inst_simple $systemdsystemunitdir/mdadm-grow-continue@.service fi fi inst_hook pre-shutdown 30 "$moddir/mdmon-pre-shutdown.sh" dracut_need_initqueue } modules.d/90mdraid/parse-md.sh 0000755 00000005044 15053306611 0012121 0 ustar 00 #!/bin/sh MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=) # normalize the uuid MD_UUID=$(str_replace "$MD_UUID" "-" "") MD_UUID=$(str_replace "$MD_UUID" ":" "") if ( ! [ -n "$MD_UUID" ] && ! getargbool 0 rd.auto ) || ! getargbool 1 rd.md -d -n rd_NO_MD; then info "rd.md=0: removing MD RAID activation" udevproperty rd_NO_MD=1 else # rewrite the md rules to only process the specified raid array if [ -n "$MD_UUID" ]; then for f in /etc/udev/rules.d/65-md-incremental*.rules; do [ -e "$f" ] || continue while read line || [ -n "$line" ]; do if [ "${line%%UUID CHECK}" != "$line" ]; then for uuid in $MD_UUID; do printf 'ENV{ID_FS_UUID}=="%s", GOTO="md_uuid_ok"\n' "$(expr substr $uuid 1 8)-$(expr substr $uuid 9 4)-$(expr substr $uuid 13 4)-$(expr substr $uuid 17 4)-$(expr substr $uuid 21 12)" done; printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n' for uuid in $MD_UUID; do printf 'ENV{MD_UUID}=="%s", GOTO="md_uuid_ok"\n' "$(expr substr $uuid 1 8):$(expr substr $uuid 9 8):$(expr substr $uuid 17 8):$(expr substr $uuid 25 8)" done; printf 'GOTO="md_end"\n' printf 'LABEL="md_uuid_ok"\n' else echo "$line" fi done < "${f}" > "${f}.new" mv "${f}.new" "$f" done for uuid in $MD_UUID; do uuid="$(expr substr $uuid 1 8):$(expr substr $uuid 9 8):$(expr substr $uuid 17 8):$(expr substr $uuid 25 8)" wait_for_dev "/dev/disk/by-id/md-uuid-${uuid}" done fi fi if [ -e /etc/mdadm.conf ] && getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then udevproperty rd_MDADMCONF=1 rm -f -- $hookdir/pre-pivot/*mdraid-cleanup.sh fi if ! getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then rm -f -- /etc/mdadm/mdadm.conf /etc/mdadm.conf ln -s $(command -v mdraid-cleanup) $hookdir/pre-pivot/31-mdraid-cleanup.sh 2>/dev/null fi # noiswmd nodmraid for anaconda / rc.sysinit compatibility # note nodmraid really means nobiosraid, so we don't want MDIMSM then either if ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd -n nodmraid; then info "no MD RAID for imsm/isw raids" udevproperty rd_NO_MDIMSM=1 fi # same thing with ddf containers if ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd -n nodmraid; then info "no MD RAID for SNIA ddf raids" udevproperty rd_NO_MDDDF=1 fi modules.d/99earlykdump/early-kdump.sh 0000755 00000003572 15053306611 0013575 0 ustar 00 #! /bin/sh KEXEC=/sbin/kexec standard_kexec_args="-p" EARLY_KDUMP_INITRD="" EARLY_KDUMP_KERNEL="" EARLY_KDUMP_CMDLINE="" EARLY_KDUMP_KERNELVER="" EARLY_KEXEC_ARGS="" . /etc/sysconfig/kdump . /lib/dracut-lib.sh . /lib/kdump-lib.sh . /lib/kdump-logger.sh #initiate the kdump logger dlog_init if [ $? -ne 0 ]; then echo "failed to initiate the kdump logger." exit 1 fi prepare_parameters() { EARLY_KDUMP_CMDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}") EARLY_KDUMP_KERNEL="/boot/kernel-earlykdump" EARLY_KDUMP_INITRD="/boot/initramfs-earlykdump" } early_kdump_load() { check_kdump_feasibility if [ $? -ne 0 ]; then return 1 fi if is_fadump_capable; then dwarn "WARNING: early kdump doesn't support fadump." return 1 fi check_current_kdump_status if [ $? == 0 ]; then return 1 fi prepare_parameters EARLY_KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}") # Here, only output the messages, but do not save these messages # to a file because the target disk may not be mounted yet, the # earlykdump is too early. ddebug "earlykdump: $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \ --command-line=$EARLY_KDUMP_CMDLINE --initrd=$EARLY_KDUMP_INITRD \ $EARLY_KDUMP_KERNEL" $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \ --command-line="$EARLY_KDUMP_CMDLINE" \ --initrd=$EARLY_KDUMP_INITRD $EARLY_KDUMP_KERNEL if [ $? == 0 ]; then dinfo "kexec: loaded early-kdump kernel" return 0 else derror "kexec: failed to load early-kdump kernel" return 1 fi } set_early_kdump() { if getargbool 0 rd.earlykdump; then dinfo "early-kdump is enabled." early_kdump_load else dinfo "early-kdump is disabled." fi return 0 } set_early_kdump modules.d/99earlykdump/module-setup.sh 0000755 00000003310 15053306611 0013754 0 ustar 00 #!/bin/bash . /etc/sysconfig/kdump KDUMP_KERNEL="" KDUMP_INITRD="" check() { if [ ! -f /etc/sysconfig/kdump ] || [ ! -f /lib/kdump/kdump-lib.sh ]\ || [ -n "${IN_KDUMP}" ] then return 1 fi return 255 } depends() { echo "base shutdown" return 0 } prepare_kernel_initrd() { . /lib/kdump/kdump-lib.sh prepare_kdump_bootinfo # $kernel is a variable from dracut if [ "$KDUMP_KERNELVER" != $kernel ]; then dwarn "Using kernel version '$KDUMP_KERNELVER' for early kdump," \ "but the initramfs is generated for kernel version '$kernel'" fi } install() { prepare_kernel_initrd if [ ! -f "$KDUMP_KERNEL" ]; then derror "Could not find required kernel for earlykdump," \ "earlykdump will not work!" return 1 fi if [ ! -f "$KDUMP_INITRD" ]; then derror "Could not find required kdump initramfs for earlykdump," \ "please ensure kdump initramfs is generated first," \ "earlykdump will not work!" return 1 fi inst_multiple tail find cut dirname hexdump inst_simple "/etc/sysconfig/kdump" inst_binary "/usr/sbin/kexec" inst_binary "/usr/bin/gawk" "/usr/bin/awk" inst_binary "/usr/bin/logger" "/usr/bin/logger" inst_binary "/usr/bin/printf" "/usr/bin/printf" inst_script "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh" inst_script "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh" inst_hook cmdline 00 "$moddir/early-kdump.sh" inst_binary "$KDUMP_KERNEL" inst_binary "$KDUMP_INITRD" ln_r "$KDUMP_KERNEL" "/boot/kernel-earlykdump" ln_r "$KDUMP_INITRD" "/boot/initramfs-earlykdump" chmod -x "${initdir}/$KDUMP_KERNEL" } modules.d/00warpclock/warpclock.sh 0000644 00000000227 15053306611 0013105 0 ustar 00 #!/bin/sh if test -e /etc/adjtime ; then while read line ; do if test "$line" = LOCAL ; then hwclock --systz fi done < /etc/adjtime fi modules.d/00warpclock/module-setup.sh 0000644 00000001226 15053306611 0013543 0 ustar 00 #!/bin/bash # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- # ex: ts=8 sw=4 sts=4 et filetype=sh # called by dracut check() { # hwclock does not exist on S390(x), bail out silently then local _arch=$(uname -m) [ "$_arch" = "s390" -o "$_arch" = "s390x" ] && return 1 [ -e /etc/localtime -a -e /etc/adjtime ] || return 1 require_binaries /sbin/hwclock || return 1 return 255 } # called by dracut depends() { return 0 } # called by dracut install() { inst /usr/share/zoneinfo/UTC inst /etc/localtime inst /etc/adjtime inst_hook pre-trigger 00 "$moddir/warpclock.sh" inst /sbin/hwclock } modules.d/95udev-rules/load-modules.sh 0000755 00000000116 15053306611 0013631 0 ustar 00 #!/bin/sh # Implement blacklisting for udev-loaded modules modprobe -b "$@" modules.d/95udev-rules/59-persistent-storage.rules 0000644 00000000423 15053306611 0016057 0 ustar 00 SUBSYSTEM!="block", GOTO="ps_end" ACTION!="add|change", GOTO="ps_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="ps_end" KERNEL=="cciss[0-9]*", IMPORT BLKID KERNEL=="nbd[0-9]*", IMPORT BLKID LABEL="ps_end" modules.d/95udev-rules/61-persistent-storage.rules 0000644 00000001773 15053306611 0016061 0 ustar 00 SUBSYSTEM!="block", GOTO="pss_end" ACTION!="add|change", GOTO="pss_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="pss_end" ACTION=="change", KERNEL=="dm-[0-9]*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}!="1", GOTO="do_pss" KERNEL=="cciss[0-9]*", GOTO="do_pss" KERNEL=="nbd[0-9]*", GOTO="do_pss" KERNEL=="md[0-9]*|md_d[0-9]*|md/*", GOTO="do_pss" GOTO="pss_end" LABEL="do_pss" # by-path (parent device path) ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="", DEVPATH!="*/virtual/*", IMPORT PATH_ID ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}" ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n" # by-label/by-uuid links (filesystem metadata) ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" LABEL="pss_end" modules.d/95udev-rules/module-setup.sh 0000755 00000006405 15053306611 0013676 0 ustar 00 #!/bin/bash # called by dracut install() { local _i # Fixme: would be nice if we didn't have to guess, which rules to grab.... # ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies # of the rules we want so that we just copy those in would be best inst_multiple udevadm cat uname blkid inst_dir /etc/udev inst_multiple -o /etc/udev/udev.conf [ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do [ -x "$_i" ] || continue inst "$_i" if ! [[ -f ${initdir}${systemdutildir}/systemd-udevd ]]; then ln -fs "$_i" ${initdir}${systemdutildir}/systemd-udevd fi break done if ! [[ -e ${initdir}${systemdutildir}/systemd-udevd ]]; then derror "Cannot find [systemd-]udevd binary!" exit 1 fi inst_rules \ 40-redhat.rules \ 50-firmware.rules \ 50-udev.rules \ 50-udev-default.rules \ 55-scsi-sg3_id.rules \ 58-scsi-sg3_symlink.rules \ 59-scsi-sg3_utils.rules \ 60-block.rules \ 60-pcmcia.rules \ 60-persistent-storage.rules \ 61-persistent-storage-edd.rules \ 70-uaccess.rules \ 71-seat.rules \ 73-seat-late.rules \ 75-net-description.rules \ 80-drivers.rules 95-udev-late.rules \ 80-net-name-slot.rules\ 80-net-setup-link.rules \ 95-late.rules \ "$moddir/59-persistent-storage.rules" \ "$moddir/61-persistent-storage.rules" \ ${NULL} prepare_udev_rules 59-persistent-storage.rules 61-persistent-storage.rules # debian udev rules inst_rules 91-permissions.rules # eudev rules inst_rules 80-drivers-modprobe.rules if dracut_module_included "systemd"; then inst_multiple -o ${systemdutildir}/network/*.link [[ $hostonly ]] && inst_multiple -H -o /etc/systemd/network/*.link fi { for i in cdrom tape dialout floppy; do if ! grep -q "^$i:" "$initdir/etc/group" 2>/dev/null; then if ! grep "^$i:" /etc/group 2>/dev/null; then case $i in cdrom) echo "$i:x:11:";; dialout) echo "$i:x:18:";; floppy) echo "$i:x:19:";; tape) echo "$i:x:33:";; esac fi fi done } >> "$initdir/etc/group" inst_multiple -o \ ${udevdir}/ata_id \ ${udevdir}/cdrom_id \ ${udevdir}/create_floppy_devices \ ${udevdir}/edd_id \ ${udevdir}/firmware.sh \ ${udevdir}/firmware \ ${udevdir}/firmware.agent \ ${udevdir}/hotplug.functions \ ${udevdir}/fw_unit_symlinks.sh \ ${udevdir}/hid2hci \ ${udevdir}/path_id \ ${udevdir}/input_id \ ${udevdir}/scsi_id \ ${udevdir}/usb_id \ ${udevdir}/pcmcia-socket-startup \ ${udevdir}/pcmcia-check-broken-cis inst_multiple -o /etc/pcmcia/config.opts [ -f /etc/arch-release ] && \ inst_script "$moddir/load-modules.sh" /lib/udev/load-modules.sh inst_libdir_file "libnss_files*" } modules.d/98selinux/selinux-loadpolicy.sh 0000755 00000004302 15053306611 0014470 0 ustar 00 #!/bin/sh # FIXME: load selinux policy. this should really be done after we switchroot rd_load_policy() { # If SELinux is disabled exit now getarg "selinux=0" > /dev/null && return 0 SELINUX="enforcing" [ -e "$NEWROOT/etc/selinux/config" ] && . "$NEWROOT/etc/selinux/config" # Check whether SELinux is in permissive mode permissive=0 getarg "enforcing=0" > /dev/null if [ $? -eq 0 -o "$SELINUX" = "permissive" ]; then permissive=1 fi # Attempt to load SELinux Policy if [ -x "$NEWROOT/usr/sbin/load_policy" -o -x "$NEWROOT/sbin/load_policy" ]; then local ret=0 local out info "Loading SELinux policy" mount -o bind /sys $NEWROOT/sys # load_policy does mount /proc and /sys/fs/selinux in # libselinux,selinux_init_load_policy() if [ -x "$NEWROOT/sbin/load_policy" ]; then out=$(LANG=C chroot "$NEWROOT" /sbin/load_policy -i 2>&1) ret=$? info $out else out=$(LANG=C chroot "$NEWROOT" /usr/sbin/load_policy -i 2>&1) ret=$? info $out fi umount $NEWROOT/sys/fs/selinux umount $NEWROOT/sys if [ "$SELINUX" = "disabled" ]; then return 0; fi if [ $ret -eq 0 -o $ret -eq 2 ]; then # If machine requires a relabel, force to permissive mode [ -e "$NEWROOT"/.autorelabel ] && LANG=C /usr/sbin/setenforce 0 mount --rbind /dev "$NEWROOT/dev" LANG=C chroot "$NEWROOT" /sbin/restorecon -R /dev umount -R "$NEWROOT/dev" return 0 fi warn "Initial SELinux policy load failed." if [ $ret -eq 3 -o $permissive -eq 0 ]; then warn "Machine in enforcing mode." warn "Not continuing" emergency_shell -n selinux exit 1 fi return 0 elif [ $permissive -eq 0 -a "$SELINUX" != "disabled" ]; then warn "Machine in enforcing mode and cannot execute load_policy." warn "To disable selinux, add selinux=0 to the kernel command line." warn "Not continuing" emergency_shell -n selinux exit 1 fi } rd_load_policy modules.d/98selinux/module-setup.sh 0000755 00000000345 15053306611 0013272 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { return 0 } # called by dracut install() { inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh" inst_multiple setenforce } modules.d/99uefi-lib/uefi-lib.sh 0000755 00000011205 15053306611 0012346 0 ustar 00 #!/bin/bash # # Copyright 2013 Red Hat, Inc. All rights reserved. # Copyright 2013 Harald Hoyer <harald@redhat.com> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # getbyte () { local IFS= LC_CTYPE=C res c read -r -n 1 -d '' c res=$? # the single quote in the argument of the printf # yields the numeric value of $c (ASCII since LC_CTYPE=C) [[ -n $c ]] && c=$(printf '%u' "'$c") || c=0 printf "$c" return $res } getword () { local b1 b2 val b1=$(getbyte) || return 1 b2=$(getbyte) || return 1 (( val = b2 * 256 + b1 )) echo $val return 0 } # Acpi(PNP0A08,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(90E2BA265ED4,0x0)/Vlan(172)/Fibre(0x4EA06104A0CC0050,0x0) uefi_device_path() { local IFS= LC_CTYPE=C res tt len type hextype first first=1 while :; do type=$(getbyte) || return 1 subtype=$(getbyte) || return 1 len=$(getword) || return 1 hextype=$(printf "%02x%02x" "$type" "$subtype") if [[ $first == 1 ]]; then first=0 elif [[ $hextype != "7fff" ]]; then printf "/" fi case $hextype in 0101) # PCI tt=$(getword) printf "PCI(0x%x,0x%x)" $(($tt / 256)) $(($tt & 255)) ;; 0201) # ACPI printf "Acpi(0x%x,0x%x)" $(($(getword) + $(getword) * 65536)) $(($(getword) + $(getword) * 65536)) ;; 0303) # FIBRE getword &>/dev/null getword &>/dev/null printf "Fibre(0x%x%x%x%x%x%x%x%x,0x%x)" \ $(getbyte) $(getbyte) $(getbyte) $(getbyte) \ $(getbyte) $(getbyte) $(getbyte) $(getbyte) \ $(( $(getword) + $(getword) * 65536 + 4294967296 * ( $(getword) + $(getword) * 65536 ) )) ;; 030b) # MAC printf "MAC(%02x%02x%02x%02x%02x%02x," $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) read -r -N 26 tt || return 1 printf "0x%x)" $(getbyte) ;; 0314) # VLAN printf "VLAN(%d)" $(getword) ;; 7fff) # END printf "\n" return 0 ;; *) printf "Unknown(Type:%d SubType:%d len=%d)" "$type" "$subtype" "$len" read -r -N $(($len-4)) tt || return 1 ;; esac done } get_fcoe_boot_mac() { data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data} [ -f $data ] || return 1 local IFS= LC_CTYPE=C tt len type hextype first=1 while :; do type=$(getbyte) || return 1 subtype=$(getbyte) || return 1 len=$(getword) || return 1 hextype=$(printf "%02x%02x" "$type" "$subtype") case $hextype in 030b) # MAC printf "%02x:%02x:%02x:%02x:%02x:%02x" $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) read -r -N 27 tt || return 1 ;; 7fff) # END return 0 ;; *) read -r -N $(($len-4)) tt || return 1 ;; esac done < $data } get_fcoe_boot_vlan() { data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data} [ -f $data ] || return 1 local IFS= LC_CTYPE=C tt len type hextype first=1 while :; do type=$(getbyte) || return 1 subtype=$(getbyte) || return 1 len=$(getword) || return 1 hextype=$(printf "%02x%02x" "$type" "$subtype") case $hextype in 0314) # VLAN printf "%d" $(getword) ;; 7fff) # END return 0 ;; *) read -r -N $(($len-4)) tt || return 1 ;; esac done < $data } modules.d/99uefi-lib/module-setup.sh 0000755 00000000324 15053306611 0013275 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { echo bash return 0 } # called by dracut install() { inst_simple "$moddir/uefi-lib.sh" "/lib/uefi-lib.sh" } modules.d/45url-lib/url-lib.sh 0000755 00000011674 15053306611 0012073 0 ustar 00 #!/bin/sh # url-lib.sh - functions for handling URLs (file fetching etc.) # # Authors: # Will Woods <wwoods@redhat.com> type mkuniqdir >/dev/null 2>&1 || . /lib/dracut-lib.sh # fetch_url URL [OUTFILE] # fetch the given URL to a locally-visible location. # if OUTFILE is given, the URL will be fetched to that filename, # overwriting it if present. # If the URL is something mountable (e.g. nfs://) and no OUTFILE is given, # the server will be left mounted until pre-pivot. # the return values are as follows: # 0: success # 253: unknown error (file missing) # 254: unhandled URL scheme / protocol # 255: bad arguments / unparseable URLs # other: fetch command failure (whatever curl/mount/etc return) fetch_url() { local url="$1" outloc="$2" local handler="$(get_url_handler $url)" [ -n "$handler" ] || return 254 [ -n "$url" ] || return 255 "$handler" "$url" "$outloc" } # get_url_handler URL # returns the first HANDLERNAME corresponding to the URL's scheme get_url_handler() { local scheme="${1%%:*}" item="" for item in $url_handler_map; do [ "$scheme" = "${item%%:*}" ] && echo "${item#*:}" && return 0 done return 1 } # add_url_handler HANDLERNAME SCHEME [SCHEME...] # associate the named handler with the named scheme(s). add_url_handler() { local handler="$1"; shift local schemes="$@" scheme="" set -- for scheme in $schemes; do [ "$(get_url_handler $scheme)" = "$handler" ] && continue set -- "$@" "$scheme:$handler" done set -- $@ $url_handler_map # add new items to *front* of list url_handler_map="$@" } ### HTTP, HTTPS, FTP ################################################# export CURL_HOME="/run/initramfs/url-lib" mkdir -p $CURL_HOME curl_args="--globoff --location --retry 3 --fail --show-error" getargbool 0 rd.noverifyssl && curl_args="$curl_args --insecure" proxy=$(getarg proxy=) [ -n "$proxy" ] && curl_args="$curl_args --proxy $proxy" curl_fetch_url() { local url="$1" outloc="$2" echo "$url" > /proc/self/fd/0 if [ -n "$outloc" ]; then curl $curl_args --output - -- "$url" > "$outloc" || return $? else local outdir="$(mkuniqdir /tmp curl_fetch_url)" ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? ) outloc="$outdir/$(ls -A $outdir)" fi if ! [ -f "$outloc" ]; then warn "Downloading '$url' failed!" return 253 fi if [ -z "$2" ]; then echo "$outloc" ; fi } add_url_handler curl_fetch_url http https ftp tftp set_http_header() { echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc } ### TORRENT ########################################################## ctorrent_args="-E 0 -e 0" ctorrent_fetch_url() { local url="$1" outloc="$2" url=${url#*//} torrent_outloc="$outloc.torrent" echo "$url" > /proc/self/fd/0 if [ -n "$outloc" ]; then curl $curl_args --output - -- "$url" > "$torrent_outloc" || return $? else local outdir="$(mkuniqdir /tmp torrent_fetch_url)" ( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? ) torrent_outloc="$outdir/$(ls -A $outdir)" outloc=${torrent_outloc%.*} fi if ! [ -f "$torrent_outloc" ]; then warn "Downloading '$url' failed!" return 253 fi ctorrent $ctorrent_args -s $outloc $torrent_outloc >&2 if ! [ -f "$outloc" ]; then warn "Torrent download of '$url' failed!" return 253 fi if [ -z "$2" ]; then echo "$outloc" ; fi } command -v ctorrent >/dev/null \ && add_url_handler ctorrent_fetch_url torrent ### NFS ############################################################## [ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh nfs_already_mounted() { local server="$1" path="$2" localdir="" s="" p="" cat /proc/mounts | while read src mnt rest || [ -n "$src" ]; do splitsep ":" "$src" s p if [ "$server" = "$s" ]; then if [ "$path" = "$p" ]; then echo $mnt elif str_starts "$path" "$p"; then echo $mnt/${path#$p/} fi fi done } nfs_fetch_url() { local url="$1" outloc="$2" nfs="" server="" path="" options="" nfs_to_var "$url" || return 255 local filepath="${path%/*}" filename="${path##*/}" mntdir="" # skip mount if server:/filepath is already mounted mntdir=$(nfs_already_mounted "$server" "$path") if [ -z "$mntdir" ]; then local mntdir="$(mkuniqdir /run nfs_mnt)" mount_nfs "$nfs:$server:$filepath${options:+:$options}" "$mntdir" # lazy unmount during pre-pivot hook inst_hook --hook pre-pivot --name 99url-lib-umount-nfs-"$(basename "$mntdir")" umount -l -- "$mntdir" fi if [ -z "$outloc" ]; then outloc="$mntdir/$filename" else cp -f -- "$mntdir/$filename" "$outloc" || return $? fi [ -f "$outloc" ] || return 253 if [ -z "$2" ]; then echo "$outloc" ; fi } command -v nfs_to_var >/dev/null && add_url_handler nfs_fetch_url nfs nfs4 modules.d/45url-lib/module-setup.sh 0000755 00000005753 15053306611 0013151 0 ustar 00 #!/bin/bash # module-setup for url-lib # called by dracut check() { require_binaries curl || return 1 return 255 } # called by dracut depends() { echo network return 0 } # called by dracut install() { local _dir _crt _found _lib _nssckbi _p11roots _p11root _p11item inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh" inst_multiple -o ctorrent inst_multiple curl # also install libs for curl https inst_libdir_file "libnsspem.so*" inst_libdir_file "libnsssysinit.so*" inst_libdir_file "libsoftokn3.so*" inst_libdir_file "libsqlite3.so*" for _dir in $libdirs; do [[ -d $_dir ]] || continue for _lib in $_dir/libcurl.so.*; do [[ -e $_lib ]] || continue [[ $_nssckbi ]] || _nssckbi=$(grep -F --binary-files=text -z libnssckbi $_lib) _crt=$(grep -F --binary-files=text -z .crt $_lib) [[ $_crt ]] || continue [[ $_crt == /*/* ]] || continue if ! inst "$_crt"; then dwarn "Couldn't install '$_crt' SSL CA cert bundle; HTTPS might not work." continue fi _found=1 done done # If we found no cert bundle files referenced in libcurl but we # *did* find a mention of libnssckbi (checked above), install it. # If its truly NSS libnssckbi, it includes its own trust bundle, # but if it's really p11-kit-trust.so, we need to find the dirs # where it will look for a trust bundle and install them too. if ! [[ $_found ]] && [[ $_nssckbi ]] ; then _found=1 inst_libdir_file "libnssckbi.so*" || _found= for _dir in $libdirs; do [[ -e $_dir/libnssckbi.so ]] || continue # this looks for directory-ish strings in the file for _p11roots in $(grep -o --binary-files=text "/[[:alpha:]][[:print:]]*" $_dir/libnssckbi.so) ; do # the string can be a :-separated list of dirs for _p11root in $(echo "$_p11roots" | tr ':' '\n') ; do # check if it's actually a directory (there are # several false positives in the results) [[ -d "$_p11root" ]] || continue # check if it has some specific subdirs that all # p11-kit trust dirs have [[ -d "${_p11root}/anchors" ]] || continue [[ -d "${_p11root}/blacklist" ]] || continue # so now we know it's really a p11-kit trust dir; # install everything in it for _p11item in $(find "$_p11root") ; do if ! inst "$_p11item" ; then dwarn "Couldn't install '$_p11item' from p11-kit trust dir '$_p11root'; HTTPS might not work." continue fi done done done done fi [[ $_found ]] || dwarn "Couldn't find SSL CA cert bundle or libnssckbi.so; HTTPS won't work." } modules.d/35network-legacy/ifup.sh 0000755 00000036267 15053306611 0013061 0 ustar 00 #!/bin/sh # # We don't need to check for ip= errors here, that is handled by the # cmdline parser script # # without $2 means this is for real netroot case # or it is for manually bring up network ie. for kdump scp vmcore PATH=/usr/sbin:/usr/bin:/sbin:/bin type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh # Huh? No $1? [ -z "$1" ] && exit 1 # $netif reads easier than $1 netif=$1 # loopback is always handled the same way if [ "$netif" = "lo" ] ; then ip link set lo up ip addr add 127.0.0.1/8 dev lo exit 0 fi # Run dhclient do_dhcp() { # dhclient-script will mark the netif up and generate the online # event for nfsroot # XXX add -V vendor class and option parsing per kernel local _COUNT=0 local _timeout=$(getargs rd.net.timeout.dhcp=) local _DHCPRETRY=$(getargs rd.net.dhcp.retry=) _DHCPRETRY=${_DHCPRETRY:-1} [ -e /tmp/dhclient.$netif.pid ] && return 0 if ! iface_has_carrier $netif; then warn "No carrier detected on interface $netif" return 1 fi if [ ! -e /run/NetworkManager/conf.d/10-dracut-dhclient.conf ]; then mkdir -p /run/NetworkManager/conf.d echo '[main]' > /run/NetworkManager/conf.d/10-dracut-dhclient.conf echo 'dhcp=dhclient' >>/run/NetworkManager/conf.d/10-dracut-dhclient.conf fi while [ $_COUNT -lt $_DHCPRETRY ]; do info "Starting dhcp for interface $netif" dhclient "$@" \ ${_timeout:+--timeout $_timeout} \ -q \ -1 \ -cf /etc/dhclient.conf \ -pf /tmp/dhclient.$netif.pid \ -lf /tmp/dhclient.$netif.lease \ $netif \ && return 0 _COUNT=$(($_COUNT+1)) [ $_COUNT -lt $_DHCPRETRY ] && sleep 1 done warn "dhcp for interface $netif failed" # nuke those files since we failed; we might retry dhcp again if it's e.g. # `ip=dhcp,dhcp6` and we check for the PID file at the top rm -f /tmp/dhclient.$netif.{pid,lease} return 1 } load_ipv6() { [ -d /proc/sys/net/ipv6 ] && return modprobe ipv6 i=0 while [ ! -d /proc/sys/net/ipv6 ]; do i=$(($i+1)) [ $i -gt 10 ] && break sleep 0.1 done } do_ipv6auto() { local ret load_ipv6 echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects linkup $netif wait_for_ipv6_auto $netif ret=$? [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname return $ret } # Handle static ip configuration do_static() { strglobin $ip '*:*:*' && load_ipv6 if ! iface_has_carrier "$netif"; then warn "No carrier detected on interface $netif" return 1 elif ! linkup "$netif"; then warn "Could not bring interface $netif up!" return 1 fi ip route get "$ip" 2>/dev/null | { read a rest if [ "$a" = "local" ]; then warn "Not assigning $ip to interface $netif, cause it is already assigned!" return 1 fi return 0 } || return 1 [ -n "$macaddr" ] && ip link set address $macaddr dev $netif [ -n "$mtu" ] && ip link set mtu $mtu dev $netif if strglobin $ip '*:*:*'; then # note no ip addr flush for ipv6 ip addr add $ip/$mask ${srv:+peer $srv} dev $netif echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects wait_for_ipv6_dad $netif else if [ -z "$srv" ]; then if command -v arping2 >/dev/null; then if arping2 -q -C 1 -c 2 -I $netif -0 $ip ; then warn "Duplicate address detected for $ip for interface $netif." return 1 fi else if ! arping -f -q -D -c 2 -I $netif $ip ; then warn "Duplicate address detected for $ip for interface $netif." return 1 fi fi fi ip addr flush dev $netif ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif fi [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname return 0 } get_vid() { case "$1" in vlan*) echo ${1#vlan} ;; *.*) echo ${1##*.} ;; esac } # check, if we need VLAN's for this interface if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then unset DO_VLAN NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif" modprobe -b -q 8021q for i in /tmp/vlan.*.${netif}; do [ -e "$i" ] || continue unset vlanname unset phydevice . "$i" if [ -n "$vlanname" ]; then linkup "$phydevice" ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)" ifup "$vlanname" fi done exit 0 fi # Check, if interface is VLAN interface if ! [ -e /tmp/vlan.${netif}.phy ]; then for i in /tmp/vlan.${netif}.*; do [ -e "$i" ] || continue export DO_VLAN=yes break done fi # bridge this interface? if [ -z "$NO_BRIDGE_MASTER" ]; then for i in /tmp/bridge.*.info; do [ -e "$i" ] || continue unset bridgeslaves unset bridgename . "$i" for ethname in $bridgeslaves ; do [ "$netif" != "$ethname" ] && continue NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname linkup $ethname if [ ! -e /tmp/bridge.$bridgename.up ]; then ip link add name $bridgename type bridge echo 0 > /sys/devices/virtual/net/$bridgename/bridge/forward_delay > /tmp/bridge.$bridgename.up fi ip link set dev $ethname master $bridgename ifup $bridgename exit 0 done done fi # enslave this interface to bond? if [ -z "$NO_BOND_MASTER" ]; then for i in /tmp/bond.*.info; do [ -e "$i" ] || continue unset bondslaves unset bondname . "$i" for slave in $bondslaves ; do [ "$netif" != "$slave" ] && continue # already setup [ -e /tmp/bond.$bondname.up ] && exit 0 # wait for all slaves to show up for slave in $bondslaves ; do # try to create the slave (maybe vlan or bridge) NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave if ! ip link show dev $slave >/dev/null 2>&1; then # wait for the last slave to show up exit 0 fi done modprobe -q -b bonding echo "+$bondname" > /sys/class/net/bonding_masters 2>/dev/null ip link set $bondname down # Stolen from ifup-eth # add the bits to setup driver parameters here for arg in $bondoptions ; do key=${arg%%=*}; value=${arg##*=}; # %{value:0:1} is replaced with non-bash specific construct if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then OLDIFS=$IFS; IFS=','; for arp_ip in $value; do echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key done IFS=$OLDIFS; else echo $value > /sys/class/net/${bondname}/bonding/$key fi done linkup $bondname for slave in $bondslaves ; do cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr ip link set $slave down echo "+$slave" > /sys/class/net/$bondname/bonding/slaves linkup $slave done # Set mtu on bond master [ -n "$bondmtu" ] && ip link set mtu $bondmtu dev $bondname # add the bits to setup the needed post enslavement parameters for arg in $bondoptions ; do key=${arg%%=*}; value=${arg##*=}; if [ "${key}" = "primary" ]; then echo $value > /sys/class/net/${bondname}/bonding/$key fi done > /tmp/bond.$bondname.up NO_BOND_MASTER=yes ifup $bondname exit $? done done fi if [ -z "$NO_TEAM_MASTER" ]; then for i in /tmp/team.*.info; do [ -e "$i" ] || continue unset teammaster unset teamslaves . "$i" for slave in $teamslaves ; do [ "$netif" != "$slave" ] && continue [ -e /tmp/team.$teammaster.up ] && exit 0 # wait for all slaves to show up for slave in $teamslaves ; do # try to create the slave (maybe vlan or bridge) NO_TEAM_MASTER=yes NO_AUTO_DHCP=yes ifup $slave if ! ip link show dev $slave >/dev/null 2>&1; then # wait for the last slave to show up exit 0 fi done if [ ! -e /tmp/team.$teammaster.up ] ; then # We shall only bring up those _can_ come up # in case of some slave is gone in active-backup mode working_slaves="" for slave in $teamslaves ; do teamdctl ${teammaster} port present ${slave} 2>/dev/null \ && continue ip link set dev $slave up 2>/dev/null if wait_for_if_up $slave; then working_slaves="$working_slaves$slave " fi done # Do not add slaves now teamd -d -U -n -N -t $teammaster -f /etc/teamd/${teammaster}.conf for slave in $working_slaves; do # team requires the slaves to be down before joining team ip link set dev $slave down ( unset TEAM_PORT_CONFIG _hwaddr=$(cat /sys/class/net/$slave/address) _subchannels=$(iface_get_subchannels "$slave") if [ -n "$_hwaddr" ] && [ -e "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" ]; then . "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" elif [ -n "$_subchannels" ] && [ -e "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" ]; then . "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" elif [ -e "/etc/sysconfig/network-scripts/ifcfg-${slave}" ]; then . "/etc/sysconfig/network-scripts/ifcfg-${slave}" fi if [ -n "${TEAM_PORT_CONFIG}" ]; then /usr/bin/teamdctl ${teammaster} port config update ${slave} "${TEAM_PORT_CONFIG}" fi ) teamdctl $teammaster port add $slave done ip link set dev $teammaster up > /tmp/team.$teammaster.up NO_TEAM_MASTER=yes ifup $teammaster exit $? fi done done fi # all synthetic interfaces done.. now check if the interface is available if ! ip link show dev $netif >/dev/null 2>&1; then exit 1 fi # disable manual ifup while netroot is set for simplifying our logic # in netroot case we prefer netroot to bringup $netif automaticlly [ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2" if [ -n "$manualup" ]; then >/tmp/net.$netif.manualup rm -f /tmp/net.${netif}.did-setup else [ -e /tmp/net.${netif}.did-setup ] && exit 0 [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0 fi # No ip lines default to dhcp ip=$(getarg ip) if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then if [ "$netroot" = "dhcp6" ]; then do_dhcp -6 else do_dhcp -4 fi for s in $(getargs nameserver); do [ -n "$s" ] || continue echo nameserver $s >> /tmp/net.$netif.resolv.conf done fi # Specific configuration, spin through the kernel command line # looking for ip= lines for p in $(getargs ip=); do ip_to_var $p # skip ibft [ "$autoconf" = "ibft" ] && continue case "$dev" in ??:??:??:??:??:??) # MAC address _dev=$(iface_for_mac $dev) [ -n "$_dev" ] && dev="$_dev" ;; ??-??-??-??-??-??) # MAC address in BOOTIF form _dev=$(iface_for_mac $(fix_bootif $dev)) [ -n "$_dev" ] && dev="$_dev" ;; esac # If this option isn't directed at our interface, skip it if [ -n "$dev" ]; then if [ "$dev" != "$netif" ]; then [ ! -e "/sys/class/net/$dev" ] \ && warn "Network interface '$dev' does not exist!" continue fi else iface_is_enslaved "$netif" && continue fi # Store config for later use for i in ip srv gw mask hostname macaddr mtu dns1 dns2; do eval '[ "$'$i'" ] && echo '$i'="$'$i'"' done > /tmp/net.$netif.override for autoopt in $(str_replace "$autoconf" "," " "); do case $autoopt in dhcp|on|any) do_dhcp -4 ;; dhcp6) load_ipv6 do_dhcp -6 ;; auto6) do_ipv6auto ;; either6) do_ipv6auto || do_dhcp -6 ;; *) do_static ;; esac done ret=$? # setup nameserver for s in "$dns1" "$dns2" $(getargs nameserver); do [ -n "$s" ] || continue echo nameserver $s >> /tmp/net.$netif.resolv.conf done if [ $ret -eq 0 ]; then > /tmp/net.${netif}.up if [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then > /tmp/net.$(cat /sys/class/net/${netif}/address).up fi # and finally, finish interface set up if there isn't already a script # to do so (which is the case in the dhcp path) if [ ! -e $hookdir/initqueue/setup_net_$netif.sh ]; then setup_net $netif source_hook initqueue/online $netif if [ -z "$manualup" ]; then /sbin/netroot $netif fi fi exit $ret fi done # no ip option directed at our interface? if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then if [ -e /tmp/net.bootdev ]; then BOOTDEV=$(cat /tmp/net.bootdev) if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then load_ipv6 do_dhcp fi else if getargs 'ip=dhcp6'; then load_ipv6 do_dhcp -6 fi if getargs 'ip=dhcp'; then do_dhcp -4 fi fi fi exit 0 modules.d/35network-legacy/parse-bridge.sh 0000755 00000002144 15053306611 0014445 0 ustar 00 #!/bin/sh # # Format: # bridge=<bridgename>:<bridgeslaves> # # <bridgeslaves> is a comma-separated list of physical (ethernet) interfaces # bridge without parameters assumes bridge=br0:eth0 # parsebridge() { local v=${1}: set -- while [ -n "$v" ]; do set -- "$@" "${v%%:*}" v=${v#*:} done case $# in 0) bridgename=br0; bridgeslaves=$iface ;; 1) die "bridge= requires two parameters" ;; 2) bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;; *) die "bridge= requires two parameters" ;; esac } # Parse bridge for bridgename and bridgeslaves for bridge in $(getargs bridge=); do unset bridgename unset bridgeslaves iface=eth0 # Read bridge= parameters if they exist if [ "$bridge" != "bridge" ]; then parsebridge $bridge fi # Simple default bridge if [ -z "$bridgename" ]; then bridgename=br0 bridgeslaves=$iface fi echo "bridgename=$bridgename" > /tmp/bridge.${bridgename}.info echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.${bridgename}.info done modules.d/35network-legacy/parse-ip-opts.sh 0000755 00000011526 15053306611 0014610 0 ustar 00 #!/bin/sh # # Format: # ip=[dhcp|on|any] # # ip=<interface>:[dhcp|on|any][:[<mtu>][:<macaddr>]] # # ip=<client-IP-number>:<server-IP-number>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{dhcp|on|any|none|off}[:[<mtu>][:<macaddr>]] # # When supplying more than only ip= line, <interface> is mandatory and # bootdev= must contain the name of the primary interface to use for # routing,dns,dhcp-options,etc. # command -v getarg >/dev/null || . /lib/dracut-lib.sh if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then # No ip= argument(s) for netroot provided, defaulting to DHCP return; fi # Count ip= lines to decide whether we need bootdev= or not if [ -z "$NEEDBOOTDEV" ] ; then count=0 for p in $(getargs ip=); do case "$p" in ibft) continue;; esac count=$(( $count + 1 )) done [ $count -gt 1 ] && NEEDBOOTDEV=1 fi unset count # If needed, check if bootdev= contains anything usable BOOTDEV=$(getarg bootdev=) if [ -n "$NEEDBOOTDEV" ] && getargbool 1 rd.neednet; then #[ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines" echo "rd.neednet=1" > /etc/cmdline.d/dracut-neednet.conf info "Multiple ip= arguments: assuming rd.neednet=1" else unset NEEDBOOTDEV fi # Check ip= lines # XXX Would be nice if we could errorcheck ip addresses here as well for p in $(getargs ip=); do ip_to_var $p # make first device specified the BOOTDEV if [ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then BOOTDEV="$dev" info "Setting bootdev to '$BOOTDEV'" fi # skip ibft since we did it above [ "$autoconf" = "ibft" ] && continue # Empty autoconf defaults to 'dhcp' if [ -z "$autoconf" ] ; then warn "Empty autoconf values default to dhcp" autoconf="dhcp" fi # Error checking for autoconf in combination with other values for autoopt in $(str_replace "$autoconf" "," " "); do case $autoopt in error) die "Error parsing option 'ip=$p'";; bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";; none|off) [ -z "$ip" ] && \ die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense" [ -z "$mask" ] && \ die "Sorry, automatic calculation of netmask is not yet supported" ;; auto6);; either6);; dhcp|dhcp6|on|any) \ [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \ die "Sorry, 'ip=$p' does not make sense for multiple interface configurations" [ -n "$ip" ] && \ die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'" ;; *) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";; esac done if [ -n "$dev" ] ; then # We don't like duplicate device configs if [ -n "$IFACES" ] ; then for i in $IFACES ; do [ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'" done fi # IFACES list for later use IFACES="$IFACES $dev" # Interface should exist if [ ! -e "/sys/class/net/$dev" ]; then warn "Network interface '$dev' does not exist" fi fi # Do we need to check for specific options? if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then # Correct device? (Empty is ok as well) [ "$dev" = "$BOOTDEV" ] || continue # Server-ip is there? [ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue # dhcp? (It's simpler to check for a set ip. Checks above ensure that if # ip is there, we're static [ -z "$ip" ] && continue # Not good! die "Server-ip or dhcp for netboot needed, but current arguments say otherwise" fi if str_starts "$dev" "enx" && [ ${#dev} -eq 15 ]; then printf -- "ifname=%s:%s:%s:%s:%s:%s:%s\n" \ "$dev" \ "${dev:3:2}" \ "${dev:5:2}" \ "${dev:7:2}" \ "${dev:9:2}" \ "${dev:11:2}" \ "${dev:13:2}" >> /etc/cmdline.d/80-enx.conf fi done # put BOOTIF in IFACES to make sure it comes up if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then BOOTDEV=$(fix_bootif $BOOTIF) IFACES="$BOOTDEV $IFACES" fi # This ensures that BOOTDEV is always first in IFACES if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}" IFACES="$BOOTDEV $IFACES" fi # Store BOOTDEV and IFACES for later use [ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev [ -n "$IFACES" ] && echo $IFACES > /tmp/net.ifaces modules.d/35network-legacy/dhclient-script.sh 0000755 00000022236 15053306611 0015201 0 ustar 00 #!/bin/sh PATH=/usr/sbin:/usr/bin:/sbin:/bin type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh # We already need a set netif here netif=$interface setup_interface() { ip=$new_ip_address mtu=$new_interface_mtu mask=$new_subnet_mask bcast=$new_broadcast_address gw=${new_routers%%,*} domain=$new_domain_name search=$(printf -- "$new_domain_search") namesrv=$new_domain_name_servers hostname=$new_host_name [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time [ -n "$new_max_life" ] && lease_time=$new_max_life preferred_lft=$lease_time [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override # Taken from debian dhclient-script: # The 576 MTU is only used for X.25 and dialup connections # where the admin wants low latency. Such a low MTU can cause # problems with UDP traffic, among other things. As such, # disallow MTUs from 576 and below by default, so that broken # MTUs are ignored, but higher stuff is allowed (1492, 1500, etc). if [ -n "$mtu" ] && [ $mtu -gt 576 ] ; then if ! ip link set $netif mtu $mtu ; then ip link set $netif down ip link set $netif mtu $mtu linkup $netif fi fi ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif \ ${lease_time:+valid_lft $lease_time} \ ${preferred_lft:+preferred_lft ${preferred_lft}} if [ -n "$gw" ] ; then if [ "$mask" = "255.255.255.255" ] ; then # point-to-point connection => set explicit route to gateway echo ip route add $gw dev $netif > /tmp/net.$netif.gw fi echo "$gw" | { IFS=' ' read -r main_gw other_gw echo ip route replace default via $main_gw dev $netif >> /tmp/net.$netif.gw if [ -n "$other_gw" ] ; then for g in $other_gw; do echo ip route add default via $g dev $netif >> /tmp/net.$netif.gw done fi } fi if getargbool 1 rd.peerdns; then [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf if [ -n "$namesrv" ] ; then for s in $namesrv; do echo nameserver $s done fi >> /tmp/net.$netif.resolv.conf fi # Note: hostname can be fqdn OR short hostname, so chop off any # trailing domain name and explicity add any domain if set. [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname } setup_interface6() { domain=$new_domain_name search=$(printf -- "$new_dhcp6_domain_search") namesrv=$new_dhcp6_name_servers hostname=$new_host_name [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time [ -n "$new_max_life" ] && lease_time=$new_max_life preferred_lft=$lease_time [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life [ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \ dev ${netif} scope global \ ${lease_time:+valid_lft $lease_time} \ ${preferred_lft:+preferred_lft ${preferred_lft}} if getargbool 1 rd.peerdns; then [ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf if [ -n "$namesrv" ] ; then for s in $namesrv; do echo nameserver $s done fi >> /tmp/net.$netif.resolv.conf fi # Note: hostname can be fqdn OR short hostname, so chop off any # trailing domain name and explicity add any domain if set. [ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname } parse_option_121() { while [ $# -ne 0 ]; do mask="$1" shift # Is the destination a multicast group? if [ $1 -ge 224 -a $1 -lt 240 ]; then multicast=1 else multicast=0 fi # Parse the arguments into a CIDR net/mask string if [ $mask -gt 24 ]; then destination="$1.$2.$3.$4/$mask" shift; shift; shift; shift elif [ $mask -gt 16 ]; then destination="$1.$2.$3.0/$mask" shift; shift; shift elif [ $mask -gt 8 ]; then destination="$1.$2.0.0/$mask" shift; shift elif [ $mask -gt 0 ]; then destination="$1.0.0.0/$mask" shift else destination="0.0.0.0/$mask" fi # Read the gateway gateway="$1.$2.$3.$4" shift; shift; shift; shift # Multicast routing on Linux # - If you set a next-hop address for a multicast group, this breaks with Cisco switches # - If you simply leave it link-local and attach it to an interface, it works fine. if [ $multicast -eq 1 -o "$gateway" = "0.0.0.0" ]; then temp_result="$destination dev $interface" else temp_result="$destination via $gateway dev $interface" fi echo "/sbin/ip route add $temp_result" done } case $reason in PREINIT) echo "dhcp: PREINIT $netif up" linkup $netif ;; PREINIT6) echo "dhcp: PREINIT6 $netif up" linkup $netif wait_for_ipv6_dad_link $netif ;; BOUND) echo "dhcp: BOND setting $netif" unset layer2 if [ -f /sys/class/net/$netif/device/layer2 ]; then read layer2 < /sys/class/net/$netif/device/layer2 fi if [ "$layer2" != "0" ]; then if command -v arping2 >/dev/null; then if arping2 -q -C 1 -c 2 -I $netif -0 $new_ip_address ; then warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying" exit 1 fi else if ! arping -f -q -D -c 2 -I $netif $new_ip_address ; then warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying" exit 1 fi fi fi unset layer2 setup_interface set | while read line || [ -n "$line" ]; do [ "${line#new_}" = "$line" ] && continue echo "$line" done >/tmp/dhclient.$netif.dhcpopts { echo '. /lib/net-lib.sh' echo "setup_net $netif" if [ -n "$new_classless_static_routes" ]; then OLDIFS="$IFS" IFS=".$IFS" parse_option_121 $new_classless_static_routes IFS="$OLDIFS" fi echo "source_hook initqueue/online $netif" [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif" echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh" } > $hookdir/initqueue/setup_net_$netif.sh echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh >/tmp/net.$netif.up if [ -e /sys/class/net/${netif}/address ]; then > /tmp/net.$(cat /sys/class/net/${netif}/address).up fi ;; RENEW|REBIND) unset lease_time [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time [ -n "$new_max_life" ] && lease_time=$new_max_life preferred_lft=$lease_time [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life ip -4 addr change ${new_ip_address}/${new_subnet_mask} broadcast ${new_broadcast_address} dev ${interface} \ ${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \ >/dev/null 2>&1 ;; BOUND6) echo "dhcp: BOND6 setting $netif" setup_interface6 set | while read line || [ -n "$line" ]; do [ "${line#new_}" = "$line" ] && continue echo "$line" done >/tmp/dhclient.$netif.dhcpopts { echo '. /lib/net-lib.sh' echo "setup_net $netif" echo "source_hook initqueue/online $netif" [ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif" echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh" } > $hookdir/initqueue/setup_net_$netif.sh echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh >/tmp/net.$netif.up if [ -e /sys/class/net/${netif}/address ]; then > /tmp/net.$(cat /sys/class/net/${netif}/address).up fi ;; RENEW6|REBIND6) unset lease_time [ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time [ -n "$new_max_life" ] && lease_time=$new_max_life preferred_lft=$lease_time [ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life ip -6 addr change ${new_ip6_address}/${new_ip6_prefixlen} dev ${interface} scope global \ ${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \ >/dev/null 2>&1 ;; *) echo "dhcp: $reason";; esac exit 0 modules.d/35network-legacy/kill-dhclient.sh 0000755 00000000374 15053306611 0014627 0 ustar 00 #!/bin/sh for f in /tmp/dhclient.*.pid; do [ -e $f ] || continue read PID < $f; kill $PID >/dev/null 2>&1 done sleep 0.1 for f in /tmp/dhclient.*.pid; do [ -e $f ] || continue read PID < $f; kill -9 $PID >/dev/null 2>&1 done modules.d/35network-legacy/parse-team.sh 0000755 00000003100 15053306611 0014130 0 ustar 00 #!/bin/sh # # Format: # team=<teammaster>:<teamslaves>[:<teamrunner>] # # teamslaves is a comma-separated list of physical (ethernet) interfaces # teamrunner is the runner type to be used (see teamd.conf(5)); defaults to activebackup # # team without parameters assumes team=team0:eth0,eth1:activebackup # parseteam() { local v=${1}: set -- while [ -n "$v" ]; do set -- "$@" "${v%%:*}" v=${v#*:} done case $# in 0) teammaster=team0; teamslaves="eth0 eth1"; teamrunner="activebackup" ;; 1) teammaster=$1; teamslaves="eth0 eth1"; teamrunner="activebackup" ;; 2) teammaster=$1; teamslaves=$(str_replace "$2" "," " "); teamrunner="activebackup" ;; 3) teammaster=$1; teamslaves=$(str_replace "$2" "," " "); teamrunner=$3 ;; *) die "team= requires zero to three parameters" ;; esac return 0 } for team in $(getargs team); do [ "$team" = "team" ] && continue unset teammaster unset teamslaves unset teamrunner parseteam "$team" || continue echo "teammaster=$teammaster" > /tmp/team.${teammaster}.info echo "teamslaves=\"$teamslaves\"" >> /tmp/team.${teammaster}.info echo "teamrunner=\"$teamrunner\"" >> /tmp/team.${teammaster}.info if ! [ -e /etc/teamd/${teammaster}.conf ]; then warn "Team master $teammaster specified, but no /etc/teamd/$teammaster.conf present. Using $teamrunner." mkdir -p /etc/teamd printf -- "%s" "{\"runner\": {\"name\": \"$teamrunner\"}, \"link_watch\": {\"name\": \"ethtool\"}}" > "/tmp/${teammaster}.conf" fi done modules.d/35network-legacy/parse-ibft.sh 0000755 00000000433 15053306611 0014134 0 ustar 00 #!/bin/sh command -v getarg >/dev/null || . /lib/dracut-lib.sh command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh if getargbool 0 rd.iscsi.ibft -d "ip=ibft"; then modprobe -b -q iscsi_boot_sysfs 2>/dev/null modprobe -b -q iscsi_ibft ibft_to_cmdline fi modules.d/35network-legacy/parse-vlan.sh 0000755 00000001226 15053306611 0014151 0 ustar 00 #!/bin/sh # # Format: # vlan=<vlanname>:<phydevice> # parsevlan() { local v=${1}: set -- while [ -n "$v" ]; do set -- "$@" "${v%%:*}" v=${v#*:} done unset vlanname phydevice case $# in 2) vlanname=$1; phydevice=$2 ;; *) die "vlan= requires two parameters" ;; esac } for vlan in $(getargs vlan=); do unset vlanname unset phydevice if [ ! "$vlan" = "vlan" ]; then parsevlan "$vlan" fi echo "phydevice=\"$phydevice\"" > /tmp/vlan.${phydevice}.phy { echo "vlanname=\"$vlanname\"" echo "phydevice=\"$phydevice\"" } > /tmp/vlan.${vlanname}.${phydevice} done modules.d/35network-legacy/net-genrules.sh 0000755 00000010015 15053306611 0014505 0 ustar 00 #!/bin/sh getargbool 0 rd.neednet && NEEDNET=1 # Don't continue if we don't need network if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && [ "$NEEDNET" != "1" ]; then return fi command -v fix_bootif >/dev/null || . /lib/net-lib.sh # Write udev rules { # bridge: attempt only the defined interface for i in /tmp/bridge.*.info; do [ -e "$i" ] || continue unset bridgeslaves unset bridgename . "$i" RAW_IFACES="$RAW_IFACES $bridgeslaves" MASTER_IFACES="$MASTER_IFACES $bridgename" done # bond: attempt only the defined interface (override bridge defines) for i in /tmp/bond.*.info; do [ -e "$i" ] || continue unset bondslaves unset bondname . "$i" # It is enough to fire up only one RAW_IFACES="$RAW_IFACES $bondslaves" MASTER_IFACES="$MASTER_IFACES ${bondname}" done for i in /tmp/team.*.info; do [ -e "$i" ] || continue unset teamslaves unset teammaster . "$i" RAW_IFACES="$RAW_IFACES ${teamslaves}" MASTER_IFACES="$MASTER_IFACES ${teammaster}" done for i in /tmp/vlan.*.phy; do [ -e "$i" ] || continue unset phydevice . "$i" RAW_IFACES="$RAW_IFACES $phydevice" for j in /tmp/vlan.*.${phydevice}; do [ -e "$j" ] || continue unset vlanname . "$j" MASTER_IFACES="$MASTER_IFACES ${vlanname}" done done MASTER_IFACES="$(trim "$MASTER_IFACES")" RAW_IFACES="$(trim "$RAW_IFACES")" if [ -z "$IFACES" ]; then [ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces fi if [ -e /tmp/net.bootdev ]; then bootdev=$(cat /tmp/net.bootdev) fi ifup='/sbin/ifup $env{INTERFACE}' runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\"" # We have some specific interfaces to handle if [ -n "${RAW_IFACES}${IFACES}" ]; then echo 'SUBSYSTEM!="net", GOTO="net_end"' echo 'ACTION!="add|change|move", GOTO="net_end"' for iface in $IFACES $RAW_IFACES; do case "$iface" in ??:??:??:??:??:??) # MAC address cond="ATTR{address}==\"$iface\"" echo "$cond, $runcmd, GOTO=\"net_end\"" ;; ??-??-??-??-??-??) # MAC address in BOOTIF form cond="ATTR{address}==\"$(fix_bootif $iface)\"" echo "$cond, $runcmd, GOTO=\"net_end\"" ;; *) # an interface name cond="ENV{INTERFACE}==\"$iface\"" echo "$cond, $runcmd, GOTO=\"net_end\"" cond="NAME==\"$iface\"" echo "$cond, $runcmd, GOTO=\"net_end\"" ;; esac # The GOTO prevents us from trying to ifup the same device twice done echo 'LABEL="net_end"' for iface in $IFACES; do if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then if [ -n "$netroot" ] && [ -n "$DRACUT_SYSTEMD" ]; then echo "systemctl is-active initrd-root-device.target || [ -f /tmp/net.${iface}.did-setup ]" else echo "[ -f /tmp/net.${iface}.did-setup ]" fi >$hookdir/initqueue/finished/wait-$iface.sh fi done # Default: We don't know the interface to use, handle all # Fixme: waiting for the interface as well. else cond='ACTION=="add", SUBSYSTEM=="net", ENV{DEVTYPE}!="wlan|wwan"' # if you change the name of "91-default-net.rules", also change modules.d/80cms/cmssetup.sh echo "$cond, $runcmd" > /etc/udev/rules.d/91-default-net.rules if [ "$NEEDNET" = "1" ]; then echo 'for i in /tmp/net.*.did-setup; do [ -f "$i" ] && exit 0; done; exit 1' >$hookdir/initqueue/finished/wait-network.sh fi fi # if you change the name of "90-net.rules", also change modules.d/80cms/cmssetup.sh } > /etc/udev/rules.d/90-net.rules modules.d/35network-legacy/parse-bond.sh 0000755 00000003727 15053306611 0014143 0 ustar 00 #!/bin/sh # # Format: # bond=<bondname>[:<bondslaves>[:<options>[:<mtu>]]] # # bondslaves is a comma-separated list of physical (ethernet) interfaces # options is a comma-separated list on bonding options (modinfo bonding for details) in format compatible with initscripts # if options include multi-valued arp_ip_target option, then its values should be separated by semicolon. # # bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr # # if the mtu is specified, it will be set on the bond master # # We translate list of slaves to space-separated here to make it easier to loop over them in ifup # Ditto for bonding options parsebond() { local v=${1}: set -- while [ -n "$v" ]; do set -- "$@" "${v%%:*}" v=${v#*:} done case $# in 0) bondname=bond0; bondslaves="eth0 eth1" ;; 1) bondname=$1; bondslaves="eth0 eth1" ;; 2) bondname=$1; bondslaves=$(str_replace "$2" "," " ") ;; 3) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " ") ;; 4) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " "); bondmtu=$4;; *) die "bond= requires zero to four parameters" ;; esac } # Parse bond for bondname, bondslaves, bondmode, bondoptions and bondmtu for bond in $(getargs bond=); do unset bondname unset bondslaves unset bondoptions unset bondmtu if [ "$bond" != "bond" ]; then parsebond "$bond" fi # Simple default bond if [ -z "$bondname" ]; then bondname=bond0 bondslaves="eth0 eth1" fi # Make it suitable for initscripts export bondoptions=$(str_replace "$bondoptions" ";" ",") echo "bondname=$bondname" > /tmp/bond.${bondname}.info echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.${bondname}.info echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.${bondname}.info echo "bondmtu=\"$bondmtu\"" >> /tmp/bond.${bondname}.info done modules.d/35network-legacy/dhclient.conf 0000644 00000000457 15053306611 0014210 0 ustar 00 option classless-static-routes code 121 = array of unsigned integer 8; send dhcp-client-identifier = hardware; request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, root-path, interface-mtu, classless-static-routes; modules.d/35network-legacy/module-setup.sh 0000755 00000005500 15053306611 0014523 0 ustar 00 #!/bin/bash # called by dracut check() { local _program require_binaries ip dhclient sed awk grep || return 1 require_any_binary arping arping2 || return 1 return 255 } # called by dracut depends() { return 0 } # called by dracut installkernel() { return 0 } # called by dracut install() { local _arch _i _dir inst_multiple ip dhclient sed awk grep inst_multiple -o arping arping2 strstr "$(arping 2>&1)" "ARPing 2" && mv "$initdir/bin/arping" "$initdir/bin/arping2" inst_multiple -o ping ping6 inst_multiple -o teamd teamdctl teamnl inst_simple /etc/libnl/classid inst_script "$moddir/ifup.sh" "/sbin/ifup" inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script" inst_simple -H "/etc/dhclient.conf" cat "$moddir/dhclient.conf" >> "${initdir}/etc/dhclient.conf" inst_hook pre-udev 60 "$moddir/net-genrules.sh" inst_hook cmdline 92 "$moddir/parse-ibft.sh" inst_hook cmdline 95 "$moddir/parse-vlan.sh" inst_hook cmdline 96 "$moddir/parse-bond.sh" inst_hook cmdline 96 "$moddir/parse-team.sh" inst_hook cmdline 97 "$moddir/parse-bridge.sh" inst_hook cmdline 98 "$moddir/parse-ip-opts.sh" inst_hook cmdline 99 "$moddir/parse-ifname.sh" inst_hook cleanup 10 "$moddir/kill-dhclient.sh" # install all config files for teaming unset TEAM_MASTER unset TEAM_CONFIG unset TEAM_PORT_CONFIG unset HWADDR unset SUBCHANNELS for i in /etc/sysconfig/network-scripts/ifcfg-*; do [ -e "$i" ] || continue case "$i" in *~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave) continue ;; esac ( . "$i" if ! [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ] \ && [ -n "${TEAM_MASTER}${TEAM_CONFIG}${TEAM_PORT_CONFIG}" ]; then if [ -n "$TEAM_CONFIG" ] && [ -n "$DEVICE" ]; then mkdir -p $initdir/etc/teamd printf -- "%s" "$TEAM_CONFIG" > "$initdir/etc/teamd/${DEVICE}.conf" elif [ -n "$TEAM_PORT_CONFIG" ]; then inst_simple "$i" HWADDR="$(echo $HWADDR | sed 'y/ABCDEF/abcdef/')" if [ -n "$HWADDR" ]; then ln_r "$i" "/etc/sysconfig/network-scripts/mac-${HWADDR}.conf" fi SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')" if [ -n "$SUBCHANNELS" ]; then ln_r "$i" "/etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf" fi fi fi ) done _arch=$(uname -m) inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \ {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" dracut_need_initqueue } modules.d/35network-legacy/parse-ifname.sh 0000755 00000001050 15053306611 0014443 0 ustar 00 #!/bin/sh # # Format: # ifname=<interface>:<mac> # # Note letters in the macaddress must be lowercase! # # Examples: # ifname=eth0:4a:3f:4c:04:f8:d7 # # Note when using ifname= to get persistent interface names, you must specify # an ifname= argument for each interface used in an ip= or fcoe= argument # check if there are any ifname parameters if ! getarg ifname= >/dev/null ; then return fi command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh # Check ifname= lines for p in $(getargs ifname=); do parse_ifname_opts $p done modules.d/90multipath/multipath-shutdown.sh 0000755 00000000254 15053306611 0015036 0 ustar 00 #!/bin/bash for i in $(multipath -l -v1); do if ! dmsetup table $i | sed -n '/.*queue_if_no_path.*/q1' ; then dmsetup message $i 0 fail_if_no_path fi done modules.d/90multipath/multipathd-stop.sh 0000755 00000000355 15053306611 0014316 0 ustar 00 #!/bin/sh if [ -e /etc/multipath.conf ]; then HARD="" while pidof multipathd >/dev/null 2>&1; do for pid in $(pidof multipathd); do kill $HARD $pid >/dev/null 2>&1 done HARD="-9" done fi modules.d/90multipath/multipathd-configure.service 0000644 00000001160 15053306611 0016330 0 ustar 00 [Unit] Description=Device-Mapper Multipath Default Configuration Before=iscsi.service iscsid.service lvm2-activation-early.service Wants=systemd-udev-trigger.service systemd-udev-settle.service local-fs-pre.target After=systemd-udev-trigger.service systemd-udev-settle.service Before=local-fs-pre.target multipathd.service DefaultDependencies=no Conflicts=shutdown.target ConditionKernelCommandLine=rd.multipath=default ConditionPathExists=!/etc/multipath.conf [Service] Type=oneshot ExecStartPre=-/usr/bin/mkdir -p /etc/multipath/multipath.conf.d ExecStart=/usr/sbin/mpathconf --enable [Install] WantedBy=sysinit.target modules.d/90multipath/multipathd.service 0000644 00000001421 15053306611 0014351 0 ustar 00 [Unit] Description=Device-Mapper Multipath Device Controller Before=iscsi.service iscsid.service lvm2-activation-early.service Wants=systemd-udev-trigger.service systemd-udev-settle.service local-fs-pre.target After=systemd-udev-trigger.service systemd-udev-settle.service Before=local-fs-pre.target Before=initrd-cleanup.service DefaultDependencies=no Conflicts=shutdown.target Conflicts=initrd-cleanup.service ConditionKernelCommandLine=!nompath ConditionKernelCommandLine=!rd.multipath=0 ConditionKernelCommandLine=!rd_NO_MULTIPATH ConditionKernelCommandLine=!multipath=off [Service] Type=simple ExecStartPre=-/sbin/modprobe dm-multipath ExecStart=/sbin/multipathd -s -d ExecReload=/sbin/multipathd reconfigure ExecStop=/sbin/multipathd shutdown [Install] WantedBy=sysinit.target modules.d/90multipath/multipathd-needshutdown.sh 0000755 00000000242 15053306611 0016033 0 ustar 00 #!/bin/sh for i in $(multipath -l -v1); do if $(dmsetup table $i | sed -n '/.*queue_if_no_path.*/q1') ; then need_shutdown break fi done modules.d/90multipath/module-setup.sh 0000755 00000006611 15053306611 0013604 0 ustar 00 #!/bin/bash is_mpath() { local _dev=$1 [ -e /sys/dev/block/$_dev/dm/uuid ] || return 1 [[ $(cat /sys/dev/block/$_dev/dm/uuid) =~ mpath- ]] && return 0 return 1 } majmin_to_mpath_dev() { local _dev for i in /dev/mapper/*; do [[ $i == /dev/mapper/control ]] && continue _dev=$(get_maj_min $i) if [ "$_dev" = "$1" ]; then echo $i return fi done } # called by dracut check() { local _rootdev [[ $hostonly ]] || [[ $mount_needs ]] && { for_each_host_dev_and_slaves is_mpath || return 255 } # if there's no multipath binary, no go. require_binaries multipath || return 1 require_binaries kpartx || return 1 return 0 } # called by dracut depends() { echo rootfs-block echo dm return 0 } # called by dracut cmdline() { for m in scsi_dh_alua scsi_dh_emc scsi_dh_rdac dm_multipath; do if grep -m 1 -q "$m" /proc/modules ; then printf 'rd.driver.pre=%s ' "$m" fi done } # called by dracut installkernel() { local _ret local _arch=$(uname -m) local _funcs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target' local _s390 if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then _s390drivers="=drivers/s390/scsi" fi hostonly='' dracut_instmods -o -s "$_funcs" "=drivers/scsi" "=drivers/md" ${_s390drivers:+"$_s390drivers"} } # called by dracut install() { local _f _allow add_hostonly_mpath_conf() { is_mpath $1 && { local _dev _dev=$(majmin_to_mpath_dev $1) [ -z "$_dev" ] && return strstr "$_allow" "$_dev" && return _allow="$_allow --allow $_dev" } } inst_multiple -o \ dmsetup \ kpartx \ mpath_wait \ mpathconf \ mpathpersist \ multipath \ multipathd \ xdrgetprio \ xdrgetuid \ /etc/xdrdevices.conf \ /etc/multipath.conf \ /etc/multipath/* \ /etc/multipath/conf.d/* [[ $hostonly ]] && [[ $hostonly_mode = "strict" ]] && { for_each_host_dev_and_slaves_all add_hostonly_mpath_conf [ -n "$_allow" ] && mpathconf $_allow --outfile ${initdir}/etc/multipath.conf } inst $(command -v partx) /sbin/partx inst_libdir_file "libmultipath*" "multipath/*" inst_libdir_file 'libgcc_s.so*' if [[ $hostonly_cmdline ]] ; then local _conf=$(cmdline) [[ $_conf ]] && echo "$_conf" >> "${initdir}/etc/cmdline.d/90multipath.conf" fi if dracut_module_included "systemd"; then inst_simple "${moddir}/multipathd-configure.service" "${systemdsystemunitdir}/multipathd-configure.service" inst_simple "${moddir}/multipathd.service" "${systemdsystemunitdir}/multipathd.service" systemctl -q --root "$initdir" enable multipathd-configure.service systemctl -q --root "$initdir" enable multipathd.service else inst_hook pre-trigger 02 "$moddir/multipathd.sh" inst_hook cleanup 02 "$moddir/multipathd-stop.sh" fi inst_hook cleanup 80 "$moddir/multipathd-needshutdown.sh" inst_hook shutdown 20 "$moddir/multipath-shutdown.sh" inst_rules 40-multipath.rules 56-multipath.rules \ 62-multipath.rules 65-multipath.rules \ 66-kpartx.rules 67-kpartx-compat.rules \ 11-dm-mpath.rules 11-dm-parts.rules } modules.d/90multipath/multipathd.sh 0000755 00000000614 15053306611 0013331 0 ustar 00 #!/bin/sh if [ "$(getarg rd.multipath)" = "default" ] && [ ! -e /etc/multipath.conf ]; then mkdir -p /etc/multipath/multipath.conf.d mpathconf --enable fi if getargbool 1 rd.multipath -d -n rd_NO_MULTIPATH && [ -e /etc/multipath.conf ]; then modprobe dm-multipath multipathd -B || multipathd need_shutdown else rm -- /etc/udev/rules.d/??-multipath.rules 2>/dev/null fi modules.d/95terminfo/module-setup.sh 0000755 00000001020 15053306611 0013412 0 ustar 00 #!/bin/bash # called by dracut install() { local _terminfodir # terminfo bits make things work better if you fall into interactive mode for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do [ -f ${_terminfodir}/l/linux ] && break done if [ -d ${_terminfodir} ]; then for i in "l/linux" "v/vt100" "v/vt102" "v/vt220"; do inst_dir "$_terminfodir/${i%/*}" $DRACUT_CP -L -t "${initdir}/${_terminfodir}/${i%/*}" "$_terminfodir/$i" done fi } modules.d/50drm/module-setup.sh 0000755 00000002514 15053306611 0012351 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { return 0 } # called by dracut installkernel() { local _modname # Include KMS capable drm drivers if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then # arm/aarch64 specific modules needed by drm instmods \ "=drivers/gpu/drm/i2c" \ "=drivers/gpu/drm/panel" \ "=drivers/gpu/drm/bridge" \ "=drivers/video/backlight" \ ${NULL} fi instmods amdkfd hyperv_fb "=drivers/pwm" # if the hardware is present, include module even if it is not currently loaded, # as we could e.g. be in the installer; nokmsboot boot parameter will disable # loading of the driver if needed if [[ $hostonly ]]; then for i in /sys/bus/{pci/devices,virtio/devices,soc/devices/soc?}/*/modalias; do [[ -e $i ]] || continue if hostonly="" dracut_instmods --silent -s "drm_crtc_init|drm_dev_register" -S "iw_handler_get_spy" $(<$i); then if strstr "$(modinfo -F filename $(<$i) 2>/dev/null)" radeon.ko; then hostonly='' instmods amdkfd fi fi done else dracut_instmods -o -s "drm_crtc_init|drm_dev_register" "=drivers/gpu/drm" "=drivers/staging" fi } modules.d/90dmraid/61-dmraid-imsm.rules 0000644 00000001631 15053306611 0013553 0 ustar 00 # This file causes block devices with RAID (dmraid) signatures to # automatically cause dmraid_scan to be run. # See udev(8) for syntax SUBSYSTEM!="block", GOTO="dm_end" ACTION!="add|change", GOTO="dm_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="dm_end" ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="dm_end" ENV{ID_FS_TYPE}!="*_raid_member", GOTO="dm_end" ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}!="?*", GOTO="dm_end" ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}!="?*", GOTO="dm_end" ENV{rd_NO_DM}=="?*", GOTO="dm_end" OPTIONS:="nowatch" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end" PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \ GOTO="dm_end" RUN+="/sbin/initqueue --onetime --unique --settled /sbin/dmraid_scan $env{DEVNAME}" LABEL="dm_end" modules.d/90dmraid/dmraid.sh 0000755 00000002266 15053306611 0011654 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh dev="$1" devenc=$(str_replace "$1" '/' '\2f') [ -e /tmp/dmraid.$devenc ] && exit 0 >/tmp/dmraid.$devenc DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=) if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then DM_CLEANUP="no" # run dmraid if udev has settled info "Scanning for dmraid devices $DM_RAIDS" SETS=$(dmraid -c -s) if [ "$SETS" = "no raid disks" -o "$SETS" = "no raid sets" ]; then return fi info "Found dmraid sets:" echo $SETS|vinfo if [ -n "$DM_RAIDS" ]; then # only activate specified DM RAIDS for r in $DM_RAIDS; do for s in $SETS; do if [ "${s##$r}" != "$s" ]; then info "Activating $s" dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo fi done done else # scan and activate all DM RAIDS for s in $SETS; do info "Activating $s" dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo [ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo udevsettle done fi need_shutdown fi modules.d/90dmraid/parse-dm.sh 0000755 00000001472 15053306611 0012122 0 ustar 00 #!/bin/sh # nodmraid for anaconda / rc.sysinit compatibility if ! getargbool 1 rd.dm -d -n rd_NO_DM || getarg "rd.dm=0" -d nodmraid; then info "rd.dm=0: removing DM RAID activation" udevproperty rd_NO_DM=1 fi if ! command -v mdadm >/dev/null \ || ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd \ || ! getargbool 1 rd.md -d -n rd_NO_MD; then info "rd.md.imsm=0: no MD RAID for imsm/isw raids" udevproperty rd_NO_MDIMSM=1 fi if ! command -v mdadm >/dev/null \ || ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd \ || ! getargbool 1 rd.md -d -n rd_NO_MD; then info "rd.md.ddf=0: no MD RAID for SNIA ddf raids" udevproperty rd_NO_MDDDF=1 fi DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=) if [ -z "$DM_RAIDS" ] && ! getargbool 0 rd.auto; then udevproperty rd_NO_DM=1 fi modules.d/90dmraid/module-setup.sh 0000755 00000004113 15053306611 0013030 0 ustar 00 #!/bin/bash # called by dracut check() { local _rootdev # if we don't have dmraid installed on the host system, no point # in trying to support it in the initramfs. require_binaries dmraid || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for dev in "${!host_fs_types[@]}"; do [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue DEVPATH=$(get_devpath_block "$dev") for holder in "$DEVPATH"/holders/*; do [[ -e "$holder" ]] || continue [[ -e "$holder/dm" ]] && return 0 break done done return 255 } return 0 } # called by dracut depends() { echo dm rootfs-block return 0 } # called by dracut cmdline() { local _activated declare -A _activated for dev in "${!host_fs_types[@]}"; do local holder DEVPATH DM_NAME majmin [[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue DEVPATH=$(get_devpath_block "$dev") for holder in "$DEVPATH"/holders/*; do [[ -e "$holder" ]] || continue dev="/dev/${holder##*/}" DM_NAME="$(dmsetup info -c --noheadings -o name "$dev" 2>/dev/null)" [[ ${DM_NAME} ]] && break done [[ ${DM_NAME} ]] || continue if ! [[ ${_activated[${DM_NAME}]} ]]; then printf "%s" " rd.dm.uuid=${DM_NAME}" _activated["${DM_NAME}"]=1 fi done } # called by dracut install() { local _i if [[ $hostonly_cmdline == "yes" ]]; then local _raidconf=$(cmdline) [[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90dmraid.conf" fi inst_multiple dmraid inst_multiple -o kpartx inst $(command -v partx) /sbin/partx inst "$moddir/dmraid.sh" /sbin/dmraid_scan inst_rules 66-kpartx.rules 67-kpartx-compat.rules inst_libdir_file "libdmraid-events*.so*" inst_rules "$moddir/61-dmraid-imsm.rules" #inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup inst_hook pre-trigger 30 "$moddir/parse-dm.sh" } modules.d/90lvm/64-lvm.rules 0000644 00000001407 15053306611 0011510 0 ustar 00 # hacky rules to try to activate lvm when we get new block devs... # # Copyright 2008, Red Hat, Inc. # Jeremy Katz <katzj@redhat.com> SUBSYSTEM!="block", GOTO="lvm_end" ACTION!="add|change", GOTO="lvm_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="lvm_end" KERNEL=="dm-[0-9]*", ACTION=="add", GOTO="lvm_end" ENV{ID_FS_TYPE}!="LVM?_member", GOTO="lvm_end" PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \ GOTO="lvm_end" RUN+="/sbin/initqueue --settled --onetime --unique /sbin/lvm_scan" RUN+="/sbin/initqueue --timeout --name 51-lvm_scan --onetime --unique /sbin/lvm_scan --partial" RUN+="/bin/sh -c '>/tmp/.lvm_scan-%k;'" LABEL="lvm_end" modules.d/90lvm/parse-lvm.sh 0000755 00000000747 15053306611 0011662 0 ustar 00 #!/bin/sh if [ -e /etc/lvm/lvm.conf ] && ! getargbool 1 rd.lvm.conf -d -n rd_NO_LVMCONF; then rm -f -- /etc/lvm/lvm.conf fi LV_DEVS="$(getargs rd.lvm.vg -d rd_LVM_VG=) $(getargs rd.lvm.lv -d rd_LVM_LV=)" if ! getargbool 1 rd.lvm -d -n rd_NO_LVM \ || ( [ -z "$LV_DEVS" ] && ! getargbool 0 rd.auto ); then info "rd.lvm=0: removing LVM activation" rm -f -- /etc/udev/rules.d/64-lvm*.rules else for dev in $LV_DEVS; do wait_for_dev -n "/dev/$dev" done fi modules.d/90lvm/lvm_scan.sh 0000755 00000006707 15053306611 0011560 0 ustar 00 #!/bin/sh # run lvm scan if udev has settled extraargs="$@" type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh VGS=$(getargs rd.lvm.vg -d rd_LVM_VG=) LVS=$(getargs rd.lvm.lv -d rd_LVM_LV=) SNAPSHOT=$(getargs rd.lvm.snapshot -d rd_LVM_SNAPSHOT=) SNAPSIZE=$(getargs rd.lvm.snapsize -d rd_LVM_SNAPSIZE=) [ -d /etc/lvm ] || mkdir -m 0755 -p /etc/lvm # build a list of devices to scan lvmdevs=$( for f in /tmp/.lvm_scan-*; do [ -e "$f" ] || continue printf '%s' "${f##/tmp/.lvm_scan-} " done ) if [ ! -e /etc/lvm/lvm.conf ]; then { echo 'devices {'; printf ' filter = [ ' for dev in $lvmdevs; do printf '"a|^/dev/%s$|", ' $dev; done; echo '"r/.*/" ]'; echo '}'; # establish LVM locking if [ -n $SNAPSHOT ]; then echo 'global {'; echo ' locking_type = 1'; echo ' use_lvmetad = 0'; echo '}'; else echo 'global {'; echo ' locking_type = 4'; echo ' use_lvmetad = 0'; echo '}'; fi } > /etc/lvm/lvm.conf lvmwritten=1 fi check_lvm_ver() { maj=$1 min=$2 ver=$3 # --poll is supported since 2.2.57 [ $4 -lt $maj ] && return 1 [ $4 -gt $maj ] && return 0 [ $5 -lt $min ] && return 1 [ $5 -gt $min ] && return 0 [ $6 -ge $ver ] && return 0 return 1 } # hopefully this output format will never change, e.g.: # LVM version: 2.02.53(1) (2009-09-25) OLDIFS=$IFS IFS=. set $(lvm version 2>/dev/null) IFS=$OLDIFS maj=${1##*:} min=$2 sub=${3%% *} sub=${sub%%\(*}; lvm_ignorelockingfailure="--ignorelockingfailure" lvm_quirk_args="--ignorelockingfailure --ignoremonitoring" check_lvm_ver 2 2 57 $maj $min $sub && \ lvm_quirk_args="$lvm_quirk_args --poll n" if check_lvm_ver 2 2 65 $maj $min $sub; then lvm_quirk_args=" --sysinit $extraargs" fi if check_lvm_ver 2 2 221 $maj $min $sub; then lvm_quirk_args=" $extraargs" unset lvm_ignorelockingfailure fi unset extraargs export LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES=1 if [ -n "$SNAPSHOT" ] ; then # HACK - this should probably be done elsewhere or turned into a function # Enable read-write LVM locking sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 1/' ${initdir}/etc/lvm/lvm.conf # Expected SNAPSHOT format "<orig lv name>:<snap lv name>" ORIG_LV=${SNAPSHOT%%:*} SNAP_LV=${SNAPSHOT##*:} info "Removing existing LVM snapshot $SNAP_LV" lvm lvremove --force $SNAP_LV 2>&1| vinfo # Determine snapshot size if [ -z "$SNAPSIZE" ] ; then SNAPSIZE=$(lvm lvs --noheadings --units m --options lv_size $ORIG_LV) info "No LVM snapshot size provided, using size of $ORIG_LV ($SNAPSIZE)" fi info "Creating LVM snapshot $SNAP_LV ($SNAPSIZE)" lvm lvcreate -s -n $SNAP_LV -L $SNAPSIZE $ORIG_LV 2>&1| vinfo fi if [ -n "$LVS" ] ; then info "Scanning devices $lvmdevs for LVM logical volumes $LVS" lvm lvscan $lvm_ignorelockingfailure 2>&1 | vinfo for LV in $LVS; do lvm lvchange --yes -K -ay $lvm_quirk_args $LV 2>&1 | vinfo done fi if [ -z "$LVS" -o -n "$VGS" ]; then info "Scanning devices $lvmdevs for LVM volume groups $VGS" lvm vgscan $lvm_ignorelockingfailure 2>&1 | vinfo lvm vgchange -ay $lvm_quirk_args $VGS 2>&1 | vinfo fi if [ "$lvmwritten" ]; then rm -f -- /etc/lvm/lvm.conf fi unset lvmwritten udevadm settle need_shutdown modules.d/90lvm/module-setup.sh 0000755 00000012277 15053306611 0012400 0 ustar 00 #!/bin/bash # called by dracut check() { # No point trying to support lvm if the binaries are missing require_binaries lvm || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ $fs = LVM*_member ]] && return 0 done return 255 } return 0 } # called by dracut depends() { # We depend on dm_mod being loaded echo rootfs-block dm return 0 } # called by dracut cmdline() { local _activated declare -A _activated for dev in "${!host_fs_types[@]}"; do [ -e /sys/block/${dev#/dev/}/dm/name ] || continue [ -e /sys/block/${dev#/dev/}/dm/uuid ] || continue uuid=$(</sys/block/${dev#/dev/}/dm/uuid) [[ "${uuid#LVM-}" == "$uuid" ]] && continue dev=$(</sys/block/${dev#/dev/}/dm/name) eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null) [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1 if ! [[ ${_activated[${DM_VG_NAME}/${DM_LV_NAME}]} ]]; then printf " rd.lvm.lv=%s\n" "${DM_VG_NAME}/${DM_LV_NAME} " _activated["${DM_VG_NAME}/${DM_LV_NAME}"]=1 fi done } installkernel() { hostonly='' instmods dm-snapshot } # called by dracut install() { local _i inst lvm if [[ $hostonly_cmdline == "yes" ]]; then local _lvmconf=$(cmdline) [[ $_lvmconf ]] && printf "%s\n" "$_lvmconf" >> "${initdir}/etc/cmdline.d/90lvm.conf" fi inst_rules "$moddir/64-lvm.rules" if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then if [ -f /etc/lvm/lvm.conf ]; then inst_simple -H /etc/lvm/lvm.conf # FIXME: near-term hack to establish read-only locking; # use command-line lvm.conf editor once it is available sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf sed -i -e 's/\(^[[:space:]]*\)use_lvmetad[[:space:]]*=[[:space:]]*[[:digit:]]/\1use_lvmetad = 0/' ${initdir}/etc/lvm/lvm.conf fi export LVM_SUPPRESS_FD_WARNINGS=1 # Also install any files needed for LVM system id support. if [ -f /etc/lvm/lvmlocal.conf ]; then inst_simple -H /etc/lvm/lvmlocal.conf fi eval $(lvm dumpconfig global/system_id_source &>/dev/null) if [ "$system_id_source" == "file" ]; then eval $(lvm dumpconfig global/system_id_file) if [ -f "$system_id_file" ]; then inst_simple -H $system_id_file fi fi unset LVM_SUPPRESS_FD_WARNINGS fi if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then mkdir -p "${initdir}/etc/lvm" { echo 'global {' echo 'locking_type = 4' echo 'use_lvmetad = 0' echo '}' } > "${initdir}/etc/lvm/lvm.conf" fi inst_rules 11-dm-lvm.rules 69-dm-lvm-metad.rules # Do not run lvmetad update via pvscan in udev rule - lvmetad is not running yet in dracut! if [[ -f ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules ]]; then if grep -q SYSTEMD_WANTS ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules; then sed -i -e 's/^ENV{SYSTEMD_ALIAS}=.*/# No LVM pvscan in dracut - lvmetad is not running yet/' \ ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules sed -i -e 's/^ENV{ID_MODEL}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules sed -i -e 's/^ENV{SYSTEMD_WANTS}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules else sed -i -e 's/.*lvm pvscan.*/# No LVM pvscan for in dracut - lvmetad is not running yet/' \ ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules fi fi # Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules # files, but provides the one below: inst_rules 64-device-mapper.rules # debian udev rules inst_rules 56-lvm.rules 60-persistent-storage-lvm.rules inst_script "$moddir/lvm_scan.sh" /sbin/lvm_scan inst_hook cmdline 30 "$moddir/parse-lvm.sh" inst_libdir_file "libdevmapper-event-lvm*.so" if [[ $hostonly ]] && find_binary lvs &>/dev/null; then for dev in "${!host_fs_types[@]}"; do [ -e /sys/block/${dev#/dev/}/dm/name ] || continue dev=$(</sys/block/${dev#/dev/}/dm/name) eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null) [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || continue case "$(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null)" in *thin*|*cache*|*era*) inst_multiple -o thin_dump thin_restore thin_check thin_repair \ cache_dump cache_restore cache_check cache_repair \ era_check era_dump era_invalidate era_restore break;; esac done fi if ! [[ $hostonly ]]; then inst_multiple -o thin_dump thin_restore thin_check thin_repair \ cache_dump cache_restore cache_check cache_repair \ era_check era_dump era_invalidate era_restore fi dracut_need_initqueue } modules.d/90btrfs/80-btrfs.rules 0000644 00000000416 15053306611 0012351 0 ustar 00 SUBSYSTEM!="block", GOTO="btrfs_end" ACTION!="add|change", GOTO="btrfs_end" ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end" RUN+="/sbin/btrfs device scan $env{DEVNAME}" RUN+="/sbin/initqueue --finished --unique --name btrfs_finished /sbin/btrfs_finished" LABEL="btrfs_end" modules.d/90btrfs/btrfs_finished.sh 0000755 00000001125 15053306611 0013256 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh btrfs_check_complete() { local _rootinfo _dev _dev="${1:-/dev/root}" [ -e "$_dev" ] || return 0 _rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null) if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then info "Checking, if btrfs device complete" unset __btrfs_mount mount -o ro "$_dev" /tmp >/dev/null 2>&1 __btrfs_mount=$? [ $__btrfs_mount -eq 0 ] && umount "$_dev" >/dev/null 2>&1 return $__btrfs_mount fi return 0 } btrfs_check_complete $1 exit $? modules.d/90btrfs/btrfs_timeout.sh 0000755 00000000216 15053306611 0013153 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh info "Scanning for all btrfs devices" /sbin/btrfs device scan >/dev/null 2>&1 modules.d/90btrfs/btrfs_device_ready.sh 0000755 00000000723 15053306611 0014113 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh btrfs_check_complete() { local _rootinfo _dev _dev="${1:-/dev/root}" [ -e "$_dev" ] || return 0 _rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null) if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then info "Checking, if btrfs device complete" btrfs device ready "$_dev" >/dev/null 2>&1 return $? fi return 0 } btrfs_check_complete $1 exit $? modules.d/90btrfs/module-setup.sh 0000755 00000002326 15053306611 0012714 0 ustar 00 #!/bin/bash # called by dracut check() { local _rootdev # if we don't have btrfs installed on the host system, # no point in trying to support it in the initramfs. require_binaries btrfs || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ "$fs" == "btrfs" ]] && return 0 done return 255 } return 0 } # called by dracut depends() { echo udev-rules return 0 } # called by dracut installkernel() { instmods btrfs # Make sure btfs can use fast crc32c implementations where available (bsc#1011554) instmods crc32c-intel } # called by dracut install() { if ! inst_rules 64-btrfs.rules; then inst_rules "$moddir/80-btrfs.rules" case "$(btrfs --help)" in *device\ ready*) inst_script "$moddir/btrfs_device_ready.sh" /sbin/btrfs_finished ;; *) inst_script "$moddir/btrfs_finished.sh" /sbin/btrfs_finished ;; esac fi if ! dracut_module_included "systemd"; then inst_hook initqueue/timeout 10 "$moddir/btrfs_timeout.sh" fi inst_multiple -o btrfsck btrfs-zero-log inst $(command -v btrfs) /sbin/btrfs } modules.d/99base/parse-root-opts.sh 0000755 00000000366 15053306611 0013154 0 ustar 00 #!/bin/sh root=$(getarg root=) rflags="$(getarg rootflags=)" getargbool 0 ro && rflags="${rflags},ro" getargbool 0 rw && rflags="${rflags},rw" rflags="${rflags#,}" fstype="$(getarg rootfstype=)" if [ -z "$fstype" ]; then fstype="auto" fi modules.d/99base/loginit.sh 0000755 00000000754 15053306611 0011544 0 ustar 00 #!/bin/sh # turn off debugging set +x QUIET=$1 printf -- "$$" > /run/initramfs/loginit.pid [ -e /dev/kmsg ] && exec 5>/dev/kmsg || exec 5>/dev/null exec 6>/run/initramfs/init.log while read line || [ -n "$line" ]; do if [ "$line" = "DRACUT_LOG_END" ]; then rm -f -- /run/initramfs/loginit.pipe exit 0 fi echo "<31>dracut: $line" >&5 # if "quiet" is specified we output to /dev/console [ -n "$QUIET" ] || echo "dracut: $line" echo "$line" >&6 done modules.d/99base/dracut-lib.sh 0000755 00000101730 15053306611 0012121 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD export NEWROOT if [ -n "$NEWROOT" ]; then [ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT fi if ! [ -d /run/initramfs ]; then mkdir -p -m 0755 /run/initramfs/log ln -sfn /run/initramfs/log /var/log fi [ -d /run/lock ] || mkdir -p -m 0755 /run/lock [ -d /run/log ] || mkdir -p -m 0755 /run/log debug_off() { set +x } debug_on() { [ "$RD_DEBUG" = "yes" ] && set -x } # returns OK if $1 contains literal string $2 (and isn't empty) strstr() { [ "${1##*"$2"*}" != "$1" ] } # returns OK if $1 matches (completely) glob pattern $2 # An empty $1 will not be considered matched, even if $2 is * which technically # matches; as it would match anything, it's not an interesting case. strglob() { [ -n "$1" -a -z "${1##$2}" ] } # returns OK if $1 contains (anywhere) a match of glob pattern $2 # An empty $1 will not be considered matched, even if $2 is * which technically # matches; as it would match anything, it's not an interesting case. strglobin() { [ -n "$1" -a -z "${1##*$2*}" ] } # returns OK if $1 contains literal string $2 at the beginning, and isn't empty str_starts() { [ "${1#"$2"*}" != "$1" ] } # returns OK if $1 contains literal string $2 at the end, and isn't empty str_ends() { [ "${1%*"$2"}" != "$1" ] } trim() { local var="$*" var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters printf "%s" "$var" } if [ -z "$DRACUT_SYSTEMD" ]; then warn() { check_quiet echo "<28>dracut Warning: $*" > /dev/kmsg echo "dracut Warning: $*" >&2 } info() { check_quiet echo "<30>dracut: $*" > /dev/kmsg [ "$DRACUT_QUIET" != "yes" ] && \ echo "dracut: $*" >&2 } else warn() { echo "Warning: $*" >&2 } info() { echo "$*" } fi vwarn() { while read line || [ -n "$line" ]; do warn $line; done } vinfo() { while read line || [ -n "$line" ]; do info $line; done } # replaces all occurrences of 'search' in 'str' with 'replacement' # # str_replace str search replacement # # example: # str_replace ' one two three ' ' ' '_' str_replace() { local in="$1"; local s="$2"; local r="$3" local out='' while strstr "${in}" "$s"; do chop="${in%%"$s"*}" out="${out}${chop}$r" in="${in#*"$s"}" done echo "${out}${in}" } killall_proc_mountpoint() { local _pid local _t local _killed=0 for _pid in /proc/*; do _pid=${_pid##/proc/} case $_pid in *[!0-9]*) continue;; esac [ -e "/proc/$_pid/exe" ] || continue [ -e "/proc/$_pid/root" ] || continue if strstr "$(ls -l -- "/proc/$_pid" "/proc/$_pid/fd" 2>/dev/null)" "$1" ; then kill -9 "$_pid" _killed=1 fi done return $_killed } getcmdline() { local _line local _i local CMDLINE_ETC_D local CMDLINE_ETC local CMDLINE_PROC unset _line if [ -e /etc/cmdline ]; then while read -r _line || [ -n "$_line" ]; do CMDLINE_ETC="$CMDLINE_ETC $_line"; done </etc/cmdline; fi for _i in /etc/cmdline.d/*.conf; do [ -e "$_i" ] || continue while read -r _line || [ -n "$_line" ]; do CMDLINE_ETC_D="$CMDLINE_ETC_D $_line"; done <"$_i"; done if [ -e /proc/cmdline ]; then while read -r _line || [ -n "$_line" ]; do CMDLINE_PROC="$CMDLINE_PROC $_line" done </proc/cmdline; fi CMDLINE="$CMDLINE_ETC_D $CMDLINE_ETC $CMDLINE_PROC" printf "%s" "$CMDLINE" } _dogetarg() { local _o _val _doecho unset _val unset _o unset _doecho CMDLINE=$(getcmdline) for _o in $CMDLINE; do if [ "${_o%%=*}" = "${1%%=*}" ]; then if [ -n "${1#*=}" -a "${1#*=*}" != "${1}" ]; then # if $1 has a "=<value>", we want the exact match if [ "$_o" = "$1" ]; then _val="1"; unset _doecho fi continue fi if [ "${_o#*=}" = "$_o" ]; then # if cmdline argument has no "=<value>", we assume "=1" _val="1"; unset _doecho continue fi _val="${_o#*=}" _doecho=1 fi done if [ -n "$_val" ]; then [ "x$_doecho" != "x" ] && echo "$_val"; return 0; fi return 1; } getarg() { debug_off local _deprecated _newoption while [ $# -gt 0 ]; do case $1 in -d) _deprecated=1; shift;; -y) if _dogetarg $2 >/dev/null; then if [ "$_deprecated" = "1" ]; then [ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption' instead." || warn "Option '$2' is deprecated." fi echo 1 debug_on return 0 fi _deprecated=0 shift 2;; -n) if _dogetarg $2 >/dev/null; then echo 0; if [ "$_deprecated" = "1" ]; then [ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption=0' instead." || warn "Option '$2' is deprecated." fi debug_on return 1 fi _deprecated=0 shift 2;; *) if [ -z "$_newoption" ]; then _newoption="$1" fi if _dogetarg $1; then if [ "$_deprecated" = "1" ]; then [ -n "$_newoption" ] && warn "Kernel command line option '$1' is deprecated, use '$_newoption' instead." || warn "Option '$1' is deprecated." fi debug_on return 0; fi _deprecated=0 shift;; esac done debug_on return 1 } # getargbool <defaultval> <args...> # False if "getarg <args...>" returns "0", "no", or "off". # True if getarg returns any other non-empty string. # If not found, assumes <defaultval> - usually 0 for false, 1 for true. # example: getargbool 0 rd.info # true: rd.info, rd.info=1, rd.info=xxx # false: rd.info=0, rd.info=off, rd.info not present (default val is 0) getargbool() { local _b unset _b local _default _default="$1"; shift _b=$(getarg "$@") [ $? -ne 0 -a -z "$_b" ] && _b="$_default" if [ -n "$_b" ]; then [ $_b = "0" ] && return 1 [ $_b = "no" ] && return 1 [ $_b = "off" ] && return 1 fi return 0 } isdigit() { case "$1" in *[!0-9]*|"") return 1;; esac return 0 } # getargnum <defaultval> <minval> <maxval> <arg> # Will echo the arg if it's in range [minval - maxval]. # If it's not set or it's not valid, will set it <defaultval>. # Note all values are required to be >= 0 here. # <defaultval> should be with [minval -maxval]. getargnum() { local _b unset _b local _default _min _max _default="$1"; shift _min="$1"; shift _max="$1"; shift _b=$(getarg "$1") [ $? -ne 0 -a -z "$_b" ] && _b=$_default if [ -n "$_b" ]; then isdigit "$_b" && _b=$(($_b)) && \ [ $_b -ge $_min ] && [ $_b -le $_max ] && echo $_b && return fi echo $_default } _dogetargs() { debug_off local _o _found _key unset _o unset _found CMDLINE=$(getcmdline) _key="$1" set -- for _o in $CMDLINE; do if [ "$_o" = "$_key" ]; then _found=1; elif [ "${_o%%=*}" = "${_key%=}" ]; then [ -n "${_o%%=*}" ] && set -- "$@" "${_o#*=}"; _found=1; fi done if [ -n "$_found" ]; then [ $# -gt 0 ] && printf '%s' "$*" return 0 fi return 1; } getargs() { debug_off local _val _i _args _gfound _deprecated unset _val unset _gfound _newoption="$1" _args="$@" set -- for _i in $_args; do if [ "$_i" = "-d" ]; then _deprecated=1 continue fi _val="$(_dogetargs $_i)" if [ $? -eq 0 ]; then if [ "$_deprecated" = "1" ]; then [ -n "$_newoption" ] && warn "Option '$_i' is deprecated, use '$_newoption' instead." || warn "Option $_i is deprecated!" fi _gfound=1 fi [ -n "$_val" ] && set -- "$@" "$_val" _deprecated=0 done if [ -n "$_gfound" ]; then if [ $# -gt 0 ]; then printf '%s' "$*" fi debug_on return 0 fi debug_on return 1; } # Prints value of given option. If option is a flag and it's present, # it just returns 0. Otherwise 1 is returned. # $1 = options separated by commas # $2 = option we are interested in # # Example: # $1 = cipher=aes-cbc-essiv:sha256,hash=sha256,verify # $2 = hash # Output: # sha256 getoptcomma() { local line=",$1,"; local opt="$2"; local tmp case "${line}" in *,${opt}=*,*) tmp="${line#*,${opt}=}" echo "${tmp%%,*}" return 0 ;; *,${opt},*) return 0;; esac return 1 } # Splits given string 'str' with separator 'sep' into variables 'var1', 'var2', # 'varN'. If number of fields is less than number of variables, remaining are # not set. If number of fields is greater than number of variables, the last # variable takes remaining fields. In short - it acts similary to 'read'. # # splitsep sep str var1 var2 varN # # example: # splitsep ':' 'foo:bar:baz' v1 v2 # in result: # v1='foo', v2='bar:baz' # # TODO: ':' inside fields. splitsep() { debug_off local sep="$1"; local str="$2"; shift 2 local tmp while [ -n "$str" -a "$#" -gt 1 ]; do tmp="${str%%$sep*}" eval "$1='${tmp}'" str="${str#"$tmp"}" str="${str#$sep}" shift done [ -n "$str" -a -n "$1" ] && eval "$1='$str'" debug_on return 0 } setdebug() { [ -f /usr/lib/initrd-release ] || return if [ -z "$RD_DEBUG" ]; then if [ -e /proc/cmdline ]; then RD_DEBUG=no if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then RD_DEBUG=yes [ -n "$BASH" ] && \ export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): '; fi fi export RD_DEBUG fi debug_on } setdebug source_all() { local f local _dir _dir=$1; shift [ "$_dir" ] && [ -d "/$_dir" ] || return for f in "/$_dir"/*.sh; do [ -e "$f" ] && . "$f" "$@"; done } hookdir=/lib/dracut/hooks export hookdir source_hook() { local _dir _dir=$1; shift source_all "/lib/dracut/hooks/$_dir" "$@" } check_finished() { local f for f in $hookdir/initqueue/finished/*.sh; do [ "$f" = "$hookdir/initqueue/finished/*.sh" ] && return 0 { [ -e "$f" ] && ( . "$f" ) ; } || return 1 done return 0 } source_conf() { local f [ "$1" ] && [ -d "/$1" ] || return for f in "/$1"/*.conf; do [ -e "$f" ] && . "$f"; done } die() { { echo "<24>dracut: FATAL: $*"; echo "<24>dracut: Refusing to continue"; } > /dev/kmsg { echo "warn dracut: FATAL: \"$*\""; echo "warn dracut: Refusing to continue"; } >> $hookdir/emergency/01-die.sh [ -d /run/initramfs ] || mkdir -p -- /run/initramfs > /run/initramfs/.die if getargbool 0 "rd.shell"; then emergency_shell else source_hook "shutdown-emergency" fi if [ -n "$DRACUT_SYSTEMD" ]; then systemctl --no-block --force halt fi exit 1 } check_quiet() { if [ -z "$DRACUT_QUIET" ]; then DRACUT_QUIET="yes" getargbool 0 rd.info -d -y rdinfo && DRACUT_QUIET="no" getargbool 0 rd.debug -d -y rdinitdebug && DRACUT_QUIET="no" getarg quiet || DRACUT_QUIET="yes" a=$(getarg loglevel=) [ -n "$a" ] && [ $a -ge 28 ] && DRACUT_QUIET="yes" export DRACUT_QUIET fi } check_occurances() { # Count the number of times the character $ch occurs in $str # Return 0 if the count matches the expected number, 1 otherwise local str="$1" local ch="$2" local expected="$3" local count=0 while [ "${str#*$ch}" != "${str}" ]; do str="${str#*$ch}" count=$(( $count + 1 )) done [ $count -eq $expected ] } incol2() { debug_off local dummy check; local file="$1"; local str="$2"; [ -z "$file" ] && return 1; [ -z "$str" ] && return 1; while read dummy check restofline || [ -n "$check" ]; do if [ "$check" = "$str" ]; then debug_on return 0 fi done < $file debug_on return 1 } udevsettle() { [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; }) if [ $UDEVVERSION -ge 143 ]; then udevadm settle --exit-if-exists=$hookdir/initqueue/work $settle_exit_if_exists else udevadm settle --timeout=30 fi } udevproperty() { [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; }) if [ $UDEVVERSION -ge 143 ]; then for i in "$@"; do udevadm control --property=$i; done else for i in "$@"; do udevadm control --env=$i; done fi } find_mount() { local dev mnt etc wanted_dev wanted_dev="$(readlink -e -q $1)" while read dev mnt etc || [ -n "$dev" ]; do [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0 done < /proc/mounts return 1 } # usage: ismounted <mountpoint> # usage: ismounted /dev/<device> if command -v findmnt >/dev/null; then ismounted() { findmnt "$1" > /dev/null 2>&1 } else ismounted() { if [ -b "$1" ]; then find_mount "$1" > /dev/null && return 0 return 1 fi while read a m a || [ -n "$m" ]; do [ "$m" = "$1" ] && return 0 done < /proc/mounts return 1 } fi # root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>] # root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>] nfsroot_to_var() { # strip nfs[4]: local arg="$@:" nfs="${arg%%:*}" arg="${arg##$nfs:}" # check if we have a server if strstr "$arg" ':/' ; then server="${arg%%:/*}" arg="/${arg##*:/}" fi path="${arg%%:*}" # rest are options options="${arg##$path}" # strip leading ":" options="${options##:}" # strip ":" options="${options%%:}" # Does it really start with '/'? [ -n "${path%%/*}" ] && path="error"; #Fix kernel legacy style separating path and options with ',' if [ "$path" != "${path#*,}" ] ; then options=${path#*,} path=${path%%,*} fi } # Create udev rule match for a device with its device name, or the udev property # ID_FS_UUID or ID_FS_LABEL # # example: # udevmatch LABEL=boot # prints: # ENV{ID_FS_LABEL}="boot" # # TODO: symlinks udevmatch() { case "$1" in UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????) printf 'ENV{ID_FS_%s}=="%s"' "${1%%=*}" "${1#*=}" ;; UUID=*) printf 'ENV{ID_FS_UUID}=="%s*"' "${1#*=}" ;; PARTUUID=*) printf 'ENV{ID_FS_PARTUUID}=="%s*"' "${1#*=}" ;; /dev/?*) printf -- 'KERNEL=="%s"' "${1#/dev/}" ;; *) return 255 ;; esac } # Prints unique path for potential file inside specified directory. It consists # of specified directory, prefix and number at the end which is incremented # until non-existing file is found. # # funiq dir prefix # # example: # # ls /mnt # cdrom0 cdrom1 # # # funiq /mnt cdrom # /mnt/cdrom2 funiq() { local dir="$1"; local prefix="$2" local i=0 [ -d "${dir}" ] || return 1 while [ -e "${dir}/${prefix}$i" ]; do i=$(($i+1)) || return 1 done echo "${dir}/${prefix}$i" } # Creates unique directory and prints its path. It's using funiq to generate # path. # # mkuniqdir subdir new_dir_name mkuniqdir() { local dir="$1"; local prefix="$2" local retdir; local retdir_new [ -d "${dir}" ] || mkdir -m 0755 -p "${dir}" || return 1 retdir=$(funiq "${dir}" "${prefix}") || return 1 until mkdir -m 0755 "${retdir}" 2>/dev/null; do retdir_new=$(funiq "${dir}" "${prefix}") || return 1 [ "$retdir_new" = "$retdir" ] && return 1 retdir="$retdir_new" done echo "${retdir}" } # Copy the contents of SRC into DEST, merging the contents of existing # directories (kinda like rsync, or cpio -p). # Creates DEST if it doesn't exist. Overwrites files with the same names. # # copytree SRC DEST copytree() { local src="$1" dest="$2" mkdir -p "$dest"; dest=$(readlink -e -q "$dest") ( cd "$src"; cp -af . -t "$dest" ) } # Evaluates command for UUIDs either given as arguments for this function or all # listed in /dev/disk/by-uuid. UUIDs doesn't have to be fully specified. If # beginning is given it is expanded to all matching UUIDs. To pass full UUID to # your command use '$___' as a place holder. Remember to escape '$'! # # foreach_uuid_until [ -p prefix ] command UUIDs # # prefix - string to put just before $___ # command - command to be evaluated # UUIDs - list of UUIDs separated by space # # The function returns after *first successful evaluation* of the given command # with status 0. If evaluation fails for every UUID function returns with # status 1. # # Example: # foreach_uuid_until "mount -U \$___ /mnt; echo OK; umount /mnt" \ # "01234 f512 a235567f-12a3-c123-a1b1-01234567abcb" foreach_uuid_until() ( cd /dev/disk/by-uuid [ "$1" = -p ] && local prefix="$2" && shift 2 local cmd="$1"; shift; local uuids_list="$*" local uuid; local full_uuid; local ___ [ -n "${cmd}" ] || return 1 for uuid in ${uuids_list:-*}; do for full_uuid in ${uuid}*; do [ -e "${full_uuid}" ] || continue ___="${prefix}${full_uuid}" eval ${cmd} && return 0 done done return 1 ) # Get kernel name for given device. Device may be the name too (then the same # is returned), a symlink (full path), UUID (prefixed with "UUID=") or label # (prefixed with "LABEL="). If just a beginning of the UUID is specified or # even an empty, function prints all device names which UUIDs match - every in # single line. # # NOTICE: The name starts with "/dev/". # # Example: # devnames UUID=123 # May print: # /dev/dm-1 # /dev/sdb1 # /dev/sdf3 devnames() { local dev="$1"; local d; local names case "$dev" in UUID=*) dev="$(foreach_uuid_until '! blkid -U $___' "${dev#UUID=}")" \ && return 255 [ -z "$dev" ] && return 255 ;; LABEL=*) dev="$(blkid -L "${dev#LABEL=}")" || return 255 ;; /dev/?*) ;; *) return 255 ;; esac for d in $dev; do names="$names $(readlink -e -q "$d")" || return 255 done echo "${names# }" } usable_root() { local _i [ -d "$1" ] || return 1 for _i in "$1"/usr/lib*/ld-*.so "$1"/lib*/ld-*.so; do [ -e "$_i" ] && return 0 done for _i in proc sys dev; do [ -e "$1"/$_i ] || return 1 done return 0 } inst_hook() { local _hookname _unique _name _job _exe while [ $# -gt 0 ]; do case "$1" in --hook) _hookname="/$2";shift;; --unique) _unique="yes";; --name) _name="$2";shift;; *) break;; esac shift done if [ -z "$_unique" ]; then _job="${_name}$$" else _job="${_name:-$1}" _job=${_job##*/} fi _exe=$1 shift [ -x "$_exe" ] || _exe=$(command -v $_exe) if [ -n "$onetime" ]; then { echo '[ -e "$_job" ] && rm -f -- "$_job"' echo "$_exe $@" } > "/tmp/$$-${_job}.sh" else echo "$_exe $@" > "/tmp/$$-${_job}.sh" fi mv -f "/tmp/$$-${_job}.sh" "$hookdir/${_hookname}/${_job}.sh" } # inst_mount_hook <mountpoint> <prio> <name> <script> # # Install a mount hook with priority <prio>, # which executes <script> as soon as <mountpoint> is mounted. inst_mount_hook() { local _prio="$2" _jobname="$3" _script="$4" local _hookname="mount-$(str_replace "$1" '/' '\\x2f')" [ -d "$hookdir/${_hookname}" ] || mkdir -p "$hookdir/${_hookname}" inst_hook --hook "$_hookname" --unique --name "${_prio}-${_jobname}" "$_script" } # add_mount_point <dev> <mountpoint> <filesystem> <fsopts> # # Mount <dev> on <mountpoint> with <filesystem> and <fsopts> # and call any mount hooks, as soon, as it is mounted add_mount_point() { local _dev="$1" _mp="$2" _fs="$3" _fsopts="$4" local _hookname="mount-$(str_replace "$2" '/' '\\x2f')" local _devname="dev-$(str_replace "$1" '/' '\\x2f')" echo "$_dev $_mp $_fs $_fsopts 0 0" >> /etc/fstab exec 7>/etc/udev/rules.d/99-mount-${_devname}.rules echo 'SUBSYSTEM!="block", GOTO="mount_end"' >&7 echo 'ACTION!="add|change", GOTO="mount_end"' >&7 if [ -n "$_dev" ]; then udevmatch "$_dev" >&7 || { warn "add_mount_point dev=$_dev incorrect!" continue } printf ', ' >&7 fi { printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue) printf -- '--name mount-%%k ' printf -- '%s %s"\n' "$(command -v mount_hook)" "${_mp}" } >&7 echo 'LABEL="mount_end"' >&7 exec 7>&- } # wait_for_mount <mountpoint> # # Installs a initqueue-finished script, # which will cause the main loop only to exit, # if <mountpoint> is mounted. wait_for_mount() { local _name _name="$(str_replace "$1" '/' '\\x2f')" printf '. /lib/dracut-lib.sh\nismounted "%s"\n' $1 \ >> "$hookdir/initqueue/finished/ismounted-${_name}.sh" { printf 'ismounted "%s" || ' $1 printf 'warn "\"%s\" is not mounted"\n' $1 } >> "$hookdir/emergency/90-${_name}.sh" } # get a systemd-compatible unit name from a path # (mimicks unit_name_from_path_instance()) dev_unit_name() { local dev="$1" if command -v systemd-escape >/dev/null; then systemd-escape -p -- "$dev" return fi if [ "$dev" = "/" -o -z "$dev" ]; then printf -- "-" exit 0 fi dev="${1%%/}" dev="${dev##/}" dev="$(str_replace "$dev" '\' '\x5c')" dev="$(str_replace "$dev" '-' '\x2d')" if [ "${dev##.}" != "$dev" ]; then dev="\x2e${dev##.}" fi dev="$(str_replace "$dev" '/' '-')" printf -- "%s" "$dev" } # set_systemd_timeout_for_dev <dev> # Set 'rd.timeout' as the systemd timeout for <dev> set_systemd_timeout_for_dev() { local _name local _needreload local _noreload local _timeout if [ "$1" = "-n" ]; then _noreload=1 shift fi _timeout=$(getarg rd.timeout) _timeout=${_timeout:-0} if [ -n "$DRACUT_SYSTEMD" ]; then _name=$(dev_unit_name "$1") if ! [ -L ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device ]; then [ -d ${PREFIX}/etc/systemd/system/initrd.target.wants ] || mkdir -p ${PREFIX}/etc/systemd/system/initrd.target.wants ln -s ../${_name}.device ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/initrd.target.wants/${_name}.device _needreload=1 fi if ! [ -f ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf ]; then mkdir -p ${PREFIX}/etc/systemd/system/${_name}.device.d { echo "[Unit]" echo "JobTimeoutSec=$_timeout" echo "JobRunningTimeoutSec=$_timeout" } > ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/${_name}.device.d/timeout.conf _needreload=1 fi if [ -z "$PREFIX" ] && [ "$_needreload" = 1 ] && [ -z "$_noreload" ]; then /sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload fi fi } # wait_for_dev <dev> # # Installs a initqueue-finished script, # which will cause the main loop only to exit, # if the device <dev> is recognized by the system. wait_for_dev() { local _name local _noreload if [ "$1" = "-n" ]; then _noreload=-n shift fi _name="$(str_replace "$1" '/' '\x2f')" type mark_hostonly >/dev/null 2>&1 && mark_hostonly "$hookdir/initqueue/finished/devexists-${_name}.sh" [ -e "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh" ] && return 0 printf '[ -e "%s" ]\n' $1 \ >> "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh" { printf '[ -e "%s" ] || ' $1 printf 'warn "\"%s\" does not exist"\n' $1 } >> "${PREFIX}$hookdir/emergency/80-${_name}.sh" set_systemd_timeout_for_dev $_noreload $1 } cancel_wait_for_dev() { local _name _name="$(str_replace "$1" '/' '\x2f')" rm -f -- "$hookdir/initqueue/finished/devexists-${_name}.sh" rm -f -- "$hookdir/emergency/80-${_name}.sh" if [ -n "$DRACUT_SYSTEMD" ]; then _name=$(dev_unit_name "$1") rm -f -- ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device rm -f -- ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf /sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload fi } killproc() { debug_off local _exe="$(command -v $1)" local _sig=$2 local _i [ -x "$_exe" ] || return 1 for _i in /proc/[0-9]*; do [ "$_i" = "/proc/1" ] && continue if [ -e "$_i"/_exe ] && [ "$_i/_exe" -ef "$_exe" ] ; then kill $_sig ${_i##*/} fi done debug_on } need_shutdown() { >/run/initramfs/.need_shutdown } wait_for_loginit() { [ "$RD_DEBUG" = "yes" ] || return [ -e /run/initramfs/loginit.pipe ] || return debug_off echo "DRACUT_LOG_END" exec 0<>/dev/console 1<>/dev/console 2<>/dev/console # wait for loginit i=0 while [ $i -lt 10 ]; do if [ ! -e /run/initramfs/loginit.pipe ]; then j=$(jobs) [ -z "$j" ] && break [ -z "${j##*Running*}" ] || break fi sleep 0.1 i=$(($i+1)) done if [ $i -eq 10 ]; then kill %1 >/dev/null 2>&1 kill $(while read line || [ -n "$line" ];do echo $line;done</run/initramfs/loginit.pid) fi setdebug rm -f -- /run/initramfs/loginit.pipe /run/initramfs/loginit.pid } # pidof version for root if ! command -v pidof >/dev/null 2>/dev/null; then pidof() { debug_off local _cmd local _exe local _rl local _ret=1 local i _cmd="$1" if [ -z "$_cmd" ]; then debug_on return 1 fi _exe=$(command -v "$1") for i in /proc/*/exe; do [ -e "$i" ] || continue if [ -n "$_exe" ]; then [ "$i" -ef "$_exe" ] || continue else _rl=$(readlink -f "$i"); [ "${_rl%/$_cmd}" != "$_rl" ] || continue fi i=${i%/exe} echo ${i##/proc/} _ret=0 done debug_on return $_ret } fi _emergency_shell() { local _name="$1" if [ -n "$DRACUT_SYSTEMD" ]; then > /.console_lock echo "PS1=\"$_name:\\\${PWD}# \"" >/etc/profile systemctl start dracut-emergency.service rm -f -- /etc/profile rm -f -- /.console_lock else debug_off source_hook "$hook" echo /sbin/rdsosreport echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot' echo 'after mounting them and attach it to a bug report.' if ! RD_DEBUG= getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then echo echo 'To get more debug information in the report,' echo 'reboot with "rd.debug" added to the kernel command line.' fi echo echo 'Dropping to debug shell.' echo export PS1="$_name:\${PWD}# " [ -e /.profile ] || >/.profile _ctty="$(RD_DEBUG= getarg rd.ctty=)" && _ctty="/dev/${_ctty##*/}" if [ -z "$_ctty" ]; then _ctty=console while [ -f /sys/class/tty/$_ctty/active ]; do _ctty=$(cat /sys/class/tty/$_ctty/active) _ctty=${_ctty##* } # last one in the list done _ctty=/dev/$_ctty fi [ -c "$_ctty" ] || _ctty=/dev/tty1 case "$(/usr/bin/setsid --help 2>&1)" in *--ctty*) CTTY="--ctty";; esac setsid $CTTY /bin/sh -i -l 0<>$_ctty 1<>$_ctty 2<>$_ctty fi } emergency_shell() { local _ctty set +e local _rdshell_name="dracut" action="Boot" hook="emergency" local _emergency_action if [ "$1" = "-n" ]; then _rdshell_name=$2 shift 2 elif [ "$1" = "--shutdown" ]; then _rdshell_name=$2; action="Shutdown"; hook="shutdown-emergency" if type plymouth >/dev/null 2>&1; then plymouth --hide-splash elif [ -x /oldroot/bin/plymouth ]; then /oldroot/bin/plymouth --hide-splash fi shift 2 fi echo ; echo warn "$*" echo _emergency_action=$(getarg rd.emergency) [ -z "$_emergency_action" ] \ && [ -e /run/initramfs/.die ] \ && _emergency_action=halt if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then _emergency_shell $_rdshell_name else source_hook "$hook" warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line." [ -z "$_emergency_action" ] && _emergency_action=halt fi case "$_emergency_action" in reboot) reboot || exit 1;; poweroff) poweroff || exit 1;; halt) halt || exit 1;; esac } # Retain the values of these variables but ensure that they are unexported # This is a POSIX-compliant equivalent of bash's "export -n" export_n() { local var local val for var in "$@"; do eval val=\$$var unset $var [ -n "$val" ] && eval $var=\"$val\" done } # returns OK if list1 contains all elements of list2, i.e. checks if list2 is a # sublist of list1. An order and a duplication doesn't matter. # # $1 = separator # $2 = list1 # $3 = list2 # $4 = ignore values, separated by $1 listlist() { local _sep="$1" local _list="${_sep}${2}${_sep}" local _sublist="$3" [ -n "$4" ] && local _iglist="${_sep}${4}${_sep}" local IFS="$_sep" local _v [ "$_list" = "$_sublist" ] && return 0 for _v in $_sublist; do if [ -n "$_v" ] && ! ( [ -n "$_iglist" ] && strstr "$_iglist" "$_v" ) then strstr "$_list" "$_v" || return 1 fi done return 0 } # returns OK if both lists contain the same values. An order and a duplication # doesn't matter. # # $1 = separator # $2 = list1 # $3 = list2 # $4 = ignore values, separated by $1 are_lists_eq() { listlist "$1" "$2" "$3" "$4" && listlist "$1" "$3" "$2" "$4" } setmemdebug() { if [ -z "$DEBUG_MEM_LEVEL" ]; then export DEBUG_MEM_LEVEL=$(getargnum 0 0 5 rd.memdebug) fi } setmemdebug # parameters: func log_level prefix msg [trace_level:trace]... make_trace_mem() { local log_level prefix msg msg_printed local trace trace_level trace_in_higher_levels insert_trace msg=$1 shift prefix='[debug_mem]' log_level=$DEBUG_MEM_LEVEL if [ -z "$log_level" ] || [ "$log_level" -le 0 ]; then return fi msg=$(echo $msg) msg_printed=0 while [ $# -gt 0 ]; do trace=${1%%:*} trace_level=${trace%%+} [ "$trace" != "$trace_level" ] && trace_in_higher_levels="yes" trace=${1##*:} if [ -z "$trace_level" ]; then trace_level=0 fi insert_trace=0 if [ -n "$trace_in_higher_levels" ]; then if [ "$log_level" -ge "$trace_level" ]; then insert_trace=1 fi else if [ "$log_level" -eq "$trace_level" ]; then insert_trace=1 fi fi if [ $insert_trace -eq 1 ]; then if [ $msg_printed -eq 0 ]; then echo "$prefix $msg" msg_printed=1 fi show_memstats $trace fi shift done } # parameters: type show_memstats() { case $1 in shortmem) cat /proc/meminfo | grep -e "^MemFree" -e "^Cached" -e "^Slab" ;; mem) cat /proc/meminfo ;; slab) cat /proc/slabinfo ;; iomem) cat /proc/iomem ;; esac } remove_hostonly_files() { rm -fr /etc/cmdline /etc/cmdline.d/*.conf "$hookdir/initqueue/finished" if [ -f /lib/dracut/hostonly-files ]; then while read line || [ -n "$line" ]; do [ -e "$line" ] || [ -h "$line" ] || continue rm -f "$line" done < /lib/dracut/hostonly-files fi } modules.d/99base/rdsosreport.sh 0000755 00000002502 15053306611 0012456 0 ustar 00 #!/bin/sh echo 'Generating "/run/initramfs/rdsosreport.txt"' [ -d /run/initramfs ] || mkdir -p /run/initramfs exec >/run/initramfs/rdsosreport.txt 2>&1 PWFILTER='s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' set -x cat /lib/dracut/dracut-* cat /proc/cmdline | sed -e "$PWFILTER" [ -f /etc/cmdline ] && cat /etc/cmdline | sed -e "$PWFILTER" for _i in /etc/cmdline.d/*.conf; do [ -f "$_i" ] || break echo $_i cat $_i | sed -e "$PWFILTER" done cat /proc/self/mountinfo cat /proc/mounts blkid blkid -o udev ls -l /dev/disk/by* for _i in /etc/conf.d/*.conf; do [ -f "$_i" ] || break echo $_i cat $_i | sed -e "$PWFILTER" done if command -v lvm >/dev/null 2>/dev/null; then lvm pvdisplay lvm vgdisplay lvm lvdisplay fi command -v dmsetup >/dev/null 2>/dev/null && dmsetup ls --tree cat /proc/mdstat command -v ip >/dev/null 2>/dev/null && ip addr if command -v journalctl >/dev/null 2>/dev/null; then journalctl -ab --no-pager -o short-monotonic | sed -e "$PWFILTER" else dmesg | sed -e "$PWFILTER" [ -f /run/initramfs/init.log ] && cat /run/initramfs/init.log | sed -e "$PWFILTER" fi modules.d/99base/init.sh 0000755 00000027025 15053306611 0011042 0 ustar 00 #!/bin/sh # # Licensed under the GPLv2 # # Copyright 2008-2010, Red Hat, Inc. # Harald Hoyer <harald@redhat.com> # Jeremy Katz <katzj@redhat.com> export -p > /tmp/export.orig NEWROOT="/sysroot" [ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT OLDPATH=$PATH PATH=/usr/sbin:/usr/bin:/sbin:/bin export PATH # mount some important things [ ! -d /proc/self ] && \ mount -t proc -o nosuid,noexec,nodev proc /proc >/dev/null if [ "$?" != "0" ]; then echo "Cannot mount proc on /proc! Compile the kernel with CONFIG_PROC_FS!" exit 1 fi [ ! -d /sys/kernel ] && \ mount -t sysfs -o nosuid,noexec,nodev sysfs /sys >/dev/null if [ "$?" != "0" ]; then echo "Cannot mount sysfs on /sys! Compile the kernel with CONFIG_SYSFS!" exit 1 fi RD_DEBUG="" . /lib/dracut-lib.sh setdebug if ! ismounted /dev; then mount -t devtmpfs -o mode=0755,noexec,nosuid,strictatime devtmpfs /dev >/dev/null fi if ! ismounted /dev; then echo "Cannot mount devtmpfs on /dev! Compile the kernel with CONFIG_DEVTMPFS!" exit 1 fi # prepare the /dev directory [ ! -h /dev/fd ] && ln -s /proc/self/fd /dev/fd >/dev/null 2>&1 [ ! -h /dev/stdin ] && ln -s /proc/self/fd/0 /dev/stdin >/dev/null 2>&1 [ ! -h /dev/stdout ] && ln -s /proc/self/fd/1 /dev/stdout >/dev/null 2>&1 [ ! -h /dev/stderr ] && ln -s /proc/self/fd/2 /dev/stderr >/dev/null 2>&1 if ! ismounted /dev/pts; then mkdir -m 0755 /dev/pts mount -t devpts -o gid=5,mode=620,noexec,nosuid devpts /dev/pts >/dev/null fi if ! ismounted /dev/shm; then mkdir -m 0755 /dev/shm mount -t tmpfs -o mode=1777,noexec,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null fi if ! ismounted /run; then mkdir -m 0755 /newrun if ! str_starts "$(readlink -f /bin/sh)" "/run/"; then mount -t tmpfs -o mode=0755,noexec,nosuid,nodev,strictatime tmpfs /newrun >/dev/null else # the initramfs binaries are located in /run, so don't mount it with noexec mount -t tmpfs -o mode=0755,nosuid,nodev,strictatime tmpfs /newrun >/dev/null fi cp -a /run/* /newrun >/dev/null 2>&1 mount --move /newrun /run rm -fr -- /newrun fi if command -v kmod >/dev/null 2>/dev/null; then kmod static-nodes --format=tmpfiles 2>/dev/null | \ while read type file mode a a a majmin || [ -n "$type" ]; do type=${type%\!} case $type in d) mkdir -m $mode -p $file ;; c) mknod -m $mode $file $type ${majmin%:*} ${majmin#*:} ;; esac done fi trap "emergency_shell Signal caught!" 0 export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; }) if [ $UDEVVERSION -gt 166 ]; then # newer versions of udev use /run/udev/rules.d export UDEVRULESD=/run/udev/rules.d [ -d /run/udev ] || mkdir -p -m 0755 /run/udev [ -d $UDEVRULESD ] || mkdir -p -m 0755 $UDEVRULESD else mkdir -m 0755 /dev/.udev /dev/.udev/rules.d export UDEVRULESD=/dev/.udev/rules.d fi if [ "$RD_DEBUG" = "yes" ]; then mkfifo /run/initramfs/loginit.pipe loginit $DRACUT_QUIET </run/initramfs/loginit.pipe >/dev/console 2>&1 & exec >/run/initramfs/loginit.pipe 2>&1 else exec 0<>/dev/console 1<>/dev/console 2<>/dev/console fi [ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release [ -n "$VERSION_ID" ] && info "$NAME-$VERSION_ID" source_conf /etc/conf.d if getarg "rd.cmdline=ask"; then echo "Enter additional kernel command line parameter (end with ctrl-d or .)" while read -p "> " line || [ -n "$line" ]; do [ "$line" = "." ] && break echo "$line" >> /etc/cmdline.d/99-cmdline-ask.conf done fi if ! getargbool 1 'rd.hostonly'; then [ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf remove_hostonly_files [ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf fi # run scriptlets to parse the command line make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline" source_hook cmdline [ -z "$root" ] && die "No or empty root= argument" [ -z "$rootok" ] && die "Don't know how to handle 'root=$root'" export root rflags fstype netroot NEWROOT # pre-udev scripts run before udev starts, and are run only once. make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=pre-udev' -d 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break before pre-udev" source_hook pre-udev UDEV_LOG=err getargbool 0 rd.udev.info -d -y rdudevinfo && UDEV_LOG=info getargbool 0 rd.udev.debug -d -y rdudevdebug && UDEV_LOG=debug # start up udev and trigger cold plugs UDEV_LOG=$UDEV_LOG $systemdutildir/systemd-udevd --daemon --resolve-names=never UDEV_QUEUE_EMPTY="udevadm settle --timeout=0" if [ $UDEVVERSION -lt 140 ]; then UDEV_QUEUE_EMPTY="udevadm settle --timeout=1" fi udevproperty "hookdir=$hookdir" make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger" source_hook pre-trigger udevadm control --reload >/dev/null 2>&1 || : # then the rest udevadm trigger --type=subsystems --action=add >/dev/null 2>&1 udevadm trigger --type=devices --action=add >/dev/null 2>&1 make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue" RDRETRY=$(getarg rd.retry -d 'rd_retry=') RDRETRY=${RDRETRY:-180} RDRETRY=$(($RDRETRY*2)) export RDRETRY main_loop=0 export main_loop while :; do check_finished && break udevsettle check_finished && break if [ -f $hookdir/initqueue/work ]; then rm -f -- $hookdir/initqueue/work fi for job in $hookdir/initqueue/*.sh; do [ -e "$job" ] || break job=$job . $job check_finished && break 2 done $UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue for job in $hookdir/initqueue/settled/*.sh; do [ -e "$job" ] || break job=$job . $job check_finished && break 2 done $UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue # no more udev jobs and queues empty. sleep 0.5 if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then for job in $hookdir/initqueue/timeout/*.sh; do [ -e "$job" ] || break job=$job . $job udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0 [ -f $hookdir/initqueue/work ] && main_loop=0 done fi main_loop=$(($main_loop+1)) [ $main_loop -gt $RDRETRY ] \ && { flock -s 9 ; emergency_shell "Could not boot."; } 9>/.console_lock done unset job unset queuetriggered unset main_loop unset RDRETRY # pre-mount happens before we try to mount the root filesystem, # and happens once. make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount" source_hook pre-mount getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount" # mount scripts actually try to mount the root filesystem, and may # be sourced any number of times. As soon as one suceeds, no more are sourced. _i_mount=0 while :; do if ismounted "$NEWROOT"; then usable_root "$NEWROOT" && break; umount "$NEWROOT" fi for f in $hookdir/mount/*.sh; do [ -f "$f" ] && . "$f" if ismounted "$NEWROOT"; then usable_root "$NEWROOT" && break; warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook" umount "$NEWROOT" rm -f -- "$f" fi done _i_mount=$(($_i_mount+1)) [ $_i_mount -gt 20 ] \ && { flock -s 9 ; emergency_shell "Can't mount root filesystem"; } 9>/.console_lock done { printf "Mounted root filesystem " while read dev mp rest || [ -n "$dev" ]; do [ "$mp" = "$NEWROOT" ] && echo $dev; done < /proc/mounts } | vinfo # pre pivot scripts are sourced just before we doing cleanup and switch over # to the new root. make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot" source_hook pre-pivot make_trace_mem "hook cleanup" '1:shortmem' '2+:mem' '3+:slab' # pre pivot cleanup scripts are sourced just before we switch over to the new root. getarg 'rd.break=cleanup' -d 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup" source_hook cleanup # By the time we get here, the root filesystem should be mounted. # Try to find init. for i in "$(getarg real_init=)" "$(getarg init=)" $(getargs rd.distroinit=) /sbin/init; do [ -n "$i" ] || continue __p=$(readlink -f "${NEWROOT}/${i}") if [ -x "$__p" -o -x "${NEWROOT}/${__p}" ]; then INIT="$i" break fi done [ "$INIT" ] || { echo "Cannot find init!" echo "Please check to make sure you passed a valid root filesystem!" emergency_shell } if [ $UDEVVERSION -lt 168 ]; then # stop udev queue before killing it udevadm control --stop-exec-queue HARD="" while pidof udevd >/dev/null 2>&1; do for pid in $(pidof udevd); do kill $HARD $pid >/dev/null 2>&1 done HARD="-9" done else udevadm control --exit udevadm info --cleanup-db fi debug_off # Turn off debugging for this section # unexport some vars export_n root rflags fstype netroot NEWROOT export RD_TIMESTAMP # Clean up the environment for i in $(export -p); do i=${i#declare -x} i=${i#export} strstr "$i" "=" || continue i=${i%%=*} [ -z "$i" ] && continue case $i in root|PATH|HOME|TERM|PS4|RD_*) :;; *) unset "$i";; esac done . /tmp/export.orig 2>/dev/null || : rm -f -- /tmp/export.orig initargs="" read CLINE </proc/cmdline if getarg init= >/dev/null ; then ignoreargs="console BOOT_IMAGE" # only pass arguments after init= to the init CLINE=${CLINE#*init=} set -- $CLINE shift # clear out the rest of the "init=" arg for x in "$@"; do for s in $ignoreargs; do [ "${x%%=*}" = $s ] && continue 2 done initargs="$initargs $x" done unset CLINE else debug_off # Turn off debugging for this section set -- $CLINE for x in "$@"; do case "$x" in [0-9]|s|S|single|emergency|auto ) \ initargs="$initargs $x" ;; esac done fi debug_on if ! [ -d "$NEWROOT"/run ]; then NEWRUN=/dev/.initramfs mkdir -m 0755 "$NEWRUN" mount --rbind /run/initramfs "$NEWRUN" fi wait_for_loginit # remove helper symlink [ -h /dev/root ] && rm -f -- /dev/root bv=$(getarg rd.break -d rdbreak) && [ -z "$bv" ] && emergency_shell -n switch_root "Break before switch_root" unset bv info "Switching root" unset PS4 CAPSH=$(command -v capsh) SWITCH_ROOT=$(command -v switch_root) PATH=$OLDPATH export PATH if [ -f /etc/capsdrop ]; then . /etc/capsdrop info "Calling $INIT with capabilities $CAPS_INIT_DROP dropped." unset RD_DEBUG exec $CAPSH --drop="$CAPS_INIT_DROP" -- \ -c "exec switch_root \"$NEWROOT\" \"$INIT\" $initargs" || \ { warn "Command:" warn capsh --drop=$CAPS_INIT_DROP -- -c exec switch_root "$NEWROOT" "$INIT" $initargs warn "failed." emergency_shell } else unset RD_DEBUG exec $SWITCH_ROOT "$NEWROOT" "$INIT" $initargs || { warn "Something went very badly wrong in the initramfs. Please " warn "file a bug against dracut." emergency_shell } fi modules.d/99base/module-setup.sh 0000755 00000010013 15053306611 0012507 0 ustar 00 #!/bin/bash # called by dracut check() { return 0 } # called by dracut depends() { echo udev-rules return 0 } # called by dracut install() { local _d inst_multiple mount mknod mkdir sleep chroot chown \ sed ls flock cp mv dmesg rm ln rmmod mkfifo umount readlink setsid inst $(command -v modprobe) /sbin/modprobe inst_multiple -o findmnt less kmod if [ ! -e "${initdir}/bin/sh" ]; then inst_multiple bash (ln -s bash "${initdir}/bin/sh" || :) fi #add common users in /etc/passwd, it will be used by nfs/ssh currently grep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd" grep '^nobody:' /etc/passwd >> "$initdir/etc/passwd" # install our scripts and hooks inst_script "$moddir/init.sh" "/init" inst_script "$moddir/initqueue.sh" "/sbin/initqueue" inst_script "$moddir/loginit.sh" "/sbin/loginit" inst_script "$moddir/rdsosreport.sh" "/sbin/rdsosreport" [ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib mkdir -m 0755 -p ${initdir}/lib/dracut mkdir -m 0755 -p ${initdir}/lib/dracut/hooks mkdir -p ${initdir}/tmp inst_simple "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh" mkdir -p "${initdir}/var" if ! dracut_module_included "systemd"; then inst_multiple switch_root || dfatal "Failed to install switch_root" inst_hook cmdline 10 "$moddir/parse-root-opts.sh" inst_multiple -o $systemdutildir/systemd-timestamp fi if [[ $realinitpath ]]; then for i in $realinitpath; do echo "rd.distroinit=$i" done > "${initdir}/etc/cmdline.d/distroinit.conf" fi ln -fs /proc/self/mounts "$initdir/etc/mtab" if [[ $ro_mnt = yes ]]; then echo ro >> "${initdir}/etc/cmdline.d/base.conf" fi local VERSION="" local PRETTY_NAME="" if [ -e /etc/os-release ]; then . /etc/os-release [[ -n ${VERSION} ]] && VERSION+=" " [[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" " fi NAME=dracut ID=dracut VERSION+="dracut-$DRACUT_VERSION" PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)" VERSION_ID=$DRACUT_VERSION ANSI_COLOR="0;31" [ -e "${initdir}/usr/lib" ] || mkdir -m 0755 -p ${initdir}/usr/lib { echo NAME=\"$NAME\" echo VERSION=\"$VERSION\" echo ID=$ID echo VERSION_ID=$VERSION_ID echo PRETTY_NAME=\"$PRETTY_NAME\" echo ANSI_COLOR=\"$ANSI_COLOR\" } > $initdir/usr/lib/initrd-release echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release ln -sf initrd-release $initdir/usr/lib/os-release ln -sf initrd-release $initdir/etc/os-release ## save host_devs which we need bring up if [[ $hostonly_cmdline == "yes" ]]; then if [[ -n "${host_devs[@]}" ]]; then dracut_need_initqueue fi if [[ -f "$initdir/lib/dracut/need-initqueue" ]] || ! dracut_module_included "systemd"; then ( if dracut_module_included "systemd"; then DRACUT_SYSTEMD=1 fi PREFIX="$initdir" . "$moddir/dracut-lib.sh" for _dev in "${host_devs[@]}"; do for _dev2 in "${root_devs[@]}"; do [[ "$_dev" == "$_dev2" ]] && continue 2 done # We only actually wait for real devs - swap is only needed # for resume and udev rules generated when parsing resume= # argument take care of the waiting for us for _dev2 in "${swap_devs[@]}"; do [[ "$_dev" == "$_dev2" ]] && continue 2 done _pdev=$(get_persistent_dev $_dev) case "$_pdev" in /dev/?*) wait_for_dev $_pdev;; *) ;; esac done ) fi fi } modules.d/99base/initqueue.sh 0000755 00000002213 15053306611 0012077 0 ustar 00 #!/bin/sh # # Licensed under the GPLv2+ # # Copyright 2008-2010, Red Hat, Inc. # Harald Hoyer <harald@redhat.com> PATH=/usr/sbin:/usr/bin:/sbin:/bin type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh while [ $# -gt 0 ]; do case "$1" in --onetime) onetime="yes";; --online) qname="/online";; --settled) qname="/settled";; --finished) qname="/finished";; --timeout) qname="/timeout";; --unique) unique="yes";; --name) name="$2";shift;; --env) env="$2"; shift;; *) break;; esac shift done if [ -z "$unique" ]; then job="${name}$$" else job="${name:-$1}" job=${job##*/} fi exe=$1 shift [ -x "$exe" ] || exe=$(command -v $exe) if [ -z "$exe" ] ; then echo "Invalid command" exit 1 fi { [ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"' [ -n "$env" ] && echo "$env" echo "$exe" "$@" } > "/tmp/$$-${job}.sh" mv -f "/tmp/$$-${job}.sh" "$hookdir/initqueue${qname}/${job}.sh" [ -z "$qname" ] && >> $hookdir/initqueue/work exit 0 modules.d/98syslog/rsyslogd-stop.sh 0000755 00000000436 15053306611 0013332 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh # Kills rsyslogd if [ -f /var/run/syslogd.pid ]; then read pid < /var/run/syslogd.pid kill $pid kill -0 $pid && kill -9 $pid else warn "rsyslogd-stop: Could not find a pid for rsyslogd. Won't kill it." fi modules.d/98syslog/syslog-cleanup.sh 0000755 00000000627 15053306611 0013450 0 ustar 00 #!/bin/sh # Just cleans up a previously started syslogd type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh if [ -f /tmp/syslog.server ]; then read syslogtype < /tmp/syslog.type if command -v "${syslogtype}-stop" >/dev/null; then ${syslogtype}-stop else warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped." fi fi modules.d/98syslog/rsyslog.conf 0000644 00000001464 15053306611 0012515 0 ustar 00 #rsyslog v3 config file # if you experience problems, check # http://www.rsyslog.com/troubleshoot for assistance #### MODULES #### $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) #$ModLoad immark.so # provides --MARK-- message capability # Provides UDP syslog reception #$ModLoad imudp.so #$UDPServerRun 514 # Provides TCP syslog reception #$ModLoad imtcp.so #$InputTCPServerRun 514 #### GLOBAL DIRECTIVES #### # Use default timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat # File syncing capability is disabled by default. This feature is usually not required, # not useful and an extreme performance hit #$ActionFileEnableSync on #### RULES #### modules.d/98syslog/parse-syslog-opts.sh 0000755 00000002202 15053306611 0014105 0 ustar 00 #!/bin/sh # Parses the syslog commandline options # #Bootparameters: #syslogserver=ip Where to syslog to #sysloglevel=level What level has to be logged #syslogtype=rsyslog|syslog|syslogng # Don't auto detect syslog but set it type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh detect_syslog() { syslogtype="" if [ -e /sbin/rsyslogd ]; then syslogtype="rsyslogd" elif [ -e /sbin/syslogd ]; then syslogtype="syslogd" elif [ -e /sbin/syslog-ng ]; then syslogtype="syslog-ng" else warn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check." fi echo "$syslogtype" [ -n "$syslogtype" ] } syslogserver=$(getarg syslog.server -d syslog) syslogfilters=$(getargs syslog.filter -d filter) syslogtype=$(getarg syslog.type -d syslogtype) [ -n "$syslogserver" ] && echo $syslogserver > /tmp/syslog.server [ -n "$syslogfilters" ] && echo "$syslogfilters" > /tmp/syslog.filters if [ -n "$syslogtype" ]; then echo "$syslogtype" > /tmp/syslog.type else syslogtype=$(detect_syslog) echo $syslogtype > /tmp/syslog.type fi modules.d/98syslog/rsyslogd-start.sh 0000755 00000002321 15053306611 0013475 0 ustar 00 #!/bin/sh # Triggered by initqueue/online and starts rsyslogd with bootparameters type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh # prevent starting again if already running if [ -f /var/run/syslogd.pid ]; then read pid < /var/run/syslogd.pid kill -0 $pid && exit 0 fi rsyslog_config() { local server=$1 shift local syslog_template=$1 shift local filters=$* local filter= cat $syslog_template ( # disable shell expansion / globbing # since filters contain such characters set -f for filter in $filters; do echo "${filter} @${server}" done ) #echo "*.* /tmp/syslog" } [ -f /tmp/syslog.type ] && read type < /tmp/syslog.type [ -f /tmp/syslog.server ] && read server < /tmp/syslog.server [ -f /tmp/syslog.filters ] && read filters < /tmp/syslog.filters [ -z "$filters" ] && filters="kern.*" [ -f /tmp/syslog.conf ] && read conf < /tmp/syslog.conf [ -z "$conf" ] && conf="/etc/rsyslog.conf" && echo "$conf" > /tmp/syslog.conf if [ $type == "rsyslogd" ]; then template=/etc/templates/rsyslog.conf if [ -n "$server" ]; then rsyslog_config "$server" "$template" "$filters" > $conf rsyslogd -c3 fi fi modules.d/98syslog/README 0000644 00000001501 15053306611 0011014 0 ustar 00 Syslog support for dracut This module provides syslog functionality in the initrd. This is especially interesting when complex configuration being used to provide access to the device the rootfs resides on. When this module is installed into the ramfs it is triggered by the udev event from the nic being setup (online). Then if syslog is configured it is started and will forward all kernel messages to the given syslog server. The syslog implementation is detected automatically by finding the appropriate binary with the following order: rsyslogd syslogd syslog-ng Then if detected the syslog.conf is generated and syslog is started. Bootparameters: syslogserver=ip Where to syslog to sysloglevel=level What level has to be logged syslogtype=rsyslog|syslog|syslogng Don't auto detect syslog but set it modules.d/98syslog/module-setup.sh 0000755 00000002221 15053306611 0013116 0 ustar 00 #!/bin/bash # called by dracut check() { # do not add this module by default return 255 } # called by dracut depends() { return 0 } # called by dracut install() { local _i local _installs if find_binary rsyslogd >/dev/null; then _installs="rsyslogd" inst_libdir_file rsyslog/lmnet.so rsyslog/imklog.so rsyslog/imuxsock.so rsyslog/imjournal.so elif find_binary syslogd >/dev/null; then _installs="syslogd" elif find_binary syslog-ng >/dev/null; then _installs="syslog-ng" else derror "Could not find any syslog binary although the syslogmodule" \ "is selected to be installed. Please check." fi if [ -n "$_installs" ]; then inst_multiple cat $_installs inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh" inst_hook cleanup 99 "$moddir/syslog-cleanup.sh" inst_hook initqueue/online 70 "$moddir/rsyslogd-start.sh" inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop mkdir -m 0755 -p ${initdir}/etc/templates inst_simple "${moddir}/rsyslog.conf" /etc/templates/rsyslog.conf fi dracut_need_initqueue } modules.d/05nss-softokn/module-setup.sh 0000755 00000000443 15053306611 0014052 0 ustar 00 #!/bin/bash # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- # ex: ts=8 sw=4 sts=4 et filetype=sh check() { return 255 } depends() { return 0 } install() { local _dir inst_libdir_file libfreeblpriv3.so libfreeblpriv3.chk \ libfreebl3.so } modules.d/35network-manager/nm-lib.sh 0000644 00000001173 15053306611 0013423 0 ustar 00 #!/bin/bash type getcmdline >/dev/null 2>&1 || . /lib/dracut-lib.sh nm_generate_connections() { rm -f /run/NetworkManager/system-connections/* /usr/libexec/nm-initrd-generator -- $(getcmdline) if getargbool 0 rd.neednet; then for i in /usr/lib/NetworkManager/system-connections/* \ /run/NetworkManager/system-connections/* \ /etc/NetworkManager/system-connections/* \ /etc/sysconfig/network-scripts/ifcfg-*; do [ -f "$i" ] || continue echo '[ -f /tmp/nm.done ]' >$hookdir/initqueue/finished/nm.sh break done fi } modules.d/35network-manager/nm-run.sh 0000755 00000002005 15053306611 0013457 0 ustar 00 #!/bin/sh for i in /usr/lib/NetworkManager/system-connections/* \ /run/NetworkManager/system-connections/* \ /etc/NetworkManager/system-connections/* \ /etc/sysconfig/network-scripts/ifcfg-*; do [ -f "$i" ] || continue if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then /usr/sbin/NetworkManager --configure-and-quit=initrd --debug --log-level=trace else /usr/sbin/NetworkManager --configure-and-quit=initrd --no-daemon fi if [ -s /run/NetworkManager/initrd/hostname ]; then cat /run/NetworkManager/initrd/hostname > /proc/sys/kernel/hostname fi break done for _i in /sys/class/net/* do state=/run/NetworkManager/devices/$(cat $_i/ifindex) grep -q connection-uuid= $state 2>/dev/null || continue ifname=${_i##*/} sed -n 's/root-path/new_root_path/p;s/next-server/new_next_server/p;s/dhcp-bootfile/filename/p' <$state >/tmp/dhclient.$ifname.dhcpopts source_hook initqueue/online $ifname /sbin/netroot $ifname done > /tmp/nm.done modules.d/35network-manager/module-setup.sh 0000755 00000003065 15053306611 0014675 0 ustar 00 #!/bin/bash # called by dracut check() { local _program require_binaries sed grep || return 1 # do not add this module by default return 255 } # called by dracut depends() { return 0 } # called by dracut installkernel() { return 0 } # called by dracut install() { local _nm_version _nm_version=$(NetworkManager --version) # We don't need `ip` but having it is *really* useful for people debugging # in an emergency shell. inst_multiple ip sed grep inst NetworkManager inst /usr/libexec/nm-initrd-generator inst_multiple -o teamd dhclient inst_hook cmdline 99 "$moddir/nm-config.sh" inst_hook initqueue/settled 99 "$moddir/nm-run.sh" inst_rules 85-nm-unmanaged.rules inst_libdir_file "NetworkManager/$_nm_version/libnm-device-plugin-team.so" inst_simple "$moddir/nm-lib.sh" "/lib/nm-lib.sh" if [[ -x "$initdir/usr/sbin/dhclient" ]]; then inst /usr/libexec/nm-dhcp-helper elif ! [[ -e "$initdir/etc/machine-id" ]]; then # The internal DHCP client silently fails if we # have no machine-id systemd-machine-id-setup --root="$initdir" fi # We don't install the ifcfg files from the host automatically. # But the user might choose to include them, so we pull in the machinery to read them. inst_libdir_file "NetworkManager/$_nm_version/libnm-settings-plugin-ifcfg-rh.so" _arch=${DRACUT_ARCH:-$(uname -m)} inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \ {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" } modules.d/35network-manager/nm-config.sh 0000755 00000000324 15053306611 0014122 0 ustar 00 #!/bin/sh type nm_generate_connections >/dev/null 2>&1 || . /lib/nm-lib.sh if [ -n "$netroot" ] || [ -e /tmp/net.ifaces ]; then echo rd.neednet >> /etc/cmdline.d/35-neednet.conf fi nm_generate_connections modules.d/99squash/init-squash.sh 0000755 00000002176 15053306611 0012736 0 ustar 00 #!/bin/sh PATH=/bin:/sbin [ -e /proc/self/mounts ] \ || (mkdir -p /proc && mount -t proc -o nosuid,noexec,nodev proc /proc) grep -q '^sysfs /sys sysfs' /proc/self/mounts \ || (mkdir -p /sys && mount -t sysfs -o nosuid,noexec,nodev sysfs /sys) grep -q '^devtmpfs /dev devtmpfs' /proc/self/mounts \ || (mkdir -p /dev && mount -t devtmpfs -o mode=755,noexec,nosuid,strictatime devtmpfs /dev) grep -q '^tmpfs /run tmpfs' /proc/self/mounts \ || (mkdir -p /run && mount -t tmpfs -o mode=755,noexec,nosuid,strictatime tmpfs /run) # Load required modules modprobe loop modprobe squashfs modprobe overlay # Mount the squash image mount -t ramfs ramfs /squash mkdir -p /squash/root /squash/overlay/upper /squash/overlay/work mount -t squashfs -o ro,loop /squash-root.img /squash/root # Setup new root overlay mkdir /newroot mount -t overlay overlay -o lowerdir=/squash/root,upperdir=/squash/overlay/upper,workdir=/squash/overlay/work/ /newroot/ # Move all mount points to new root to prepare chroot mount --move /squash /newroot/squash # Jump to new root and clean setup files SYSTEMD_IN_INITRD=lenient exec switch_root /newroot /init modules.d/99squash/module-setup.sh 0000644 00000004114 15053306611 0013103 0 ustar 00 #!/bin/bash check() { require_binaries mksquashfs unsquashfs || return 1 for i in CONFIG_SQUASHFS CONFIG_BLK_DEV_LOOP CONFIG_OVERLAY_FS ; do if ! check_kernel_config $i; then dinfo "dracut-squash module requires kernel configuration $i (y or m)" return 1 fi done return 255 } depends() { echo "systemd-initrd" return 0 } installpost() { local _busybox _busybox=$(find_binary busybox) # Move everything under $initdir except $squash_dir # itself into squash image for i in "$initdir"/*; do [[ "$squash_dir" == "$i"/* ]] || mv "$i" "$squash_dir"/ done # Create mount points for squash loader mkdir -p "$initdir"/squash/ mkdir -p "$squash_dir"/squash/ # Copy dracut spec files out side of the squash image # so dracut rebuild and lsinitrd can work mkdir -p "$initdir/usr/lib/dracut/" for file in "$squash_dir"/usr/lib/dracut/*; do [[ -f $file ]] || continue cp "$file" "$initdir/${file#$squash_dir}" done # Install required modules and binaries for the squash image init script. if [[ $_busybox ]]; then inst "$_busybox" /usr/bin/busybox for _i in sh echo mount modprobe mkdir switch_root grep umount; do ln_r /usr/bin/busybox /usr/bin/$_i done else DRACUT_RESOLVE_DEPS=1 inst_multiple sh mount modprobe mkdir switch_root grep umount # libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so inst_libdir_file -o "libgcc_s.so*" # FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled [[ $DRACUT_FIPS_MODE ]] && inst_libdir_file -o "libssl.so*" fi hostonly="" instmods "loop" "squashfs" "overlay" dracut_kernel_post # Install squash image init script. ln_r /usr/bin /bin ln_r /usr/sbin /sbin inst_simple "$moddir"/init-squash.sh /init # make sure that library links are correct and up to date for squash loader build_ld_cache } install() { if [[ $DRACUT_SQUASH_POST_INST ]]; then installpost fi } modules.d/99squash/.shchkdir 0000644 00000000000 15053306611 0011712 0 ustar 00 modules.d/45ifcfg/write-ifcfg.sh 0000755 00000021242 15053306611 0012433 0 ustar 00 #!/bin/sh # NFS root might have reached here before /tmp/net.ifaces was written type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh udevadm settle --timeout=30 mkdir -m 0755 -p /tmp/ifcfg/ mkdir -m 0755 -p /tmp/ifcfg-leases/ get_config_line_by_subchannel() { local CHANNEL local line CHANNELS="$1" while read line || [ -n "$line" ]; do if strstr "$line" "$CHANNELS"; then echo $line return 0 fi done < /etc/ccw.conf return 1 } print_s390() { local _netif local SUBCHANNELS local OPTIONS local NETTYPE local CONFIG_LINE local i local channel local OLD_IFS _netif="$1" # if we find ccw channel, then use those, instead of # of the MAC SUBCHANNELS=$({ for i in /sys/class/net/$_netif/device/cdev[0-9]*; do [ -e $i ] || continue channel=$(readlink -f $i) printf '%s' "${channel##*/}," done }) [ -n "$SUBCHANNELS" ] || return 1 SUBCHANNELS=${SUBCHANNELS%,} echo "SUBCHANNELS=\"${SUBCHANNELS}\"" CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS) [ $? -ne 0 -o -z "$CONFIG_LINE" ] && return 0 OLD_IFS=$IFS IFS="," set -- $CONFIG_LINE IFS=$OLD_IFS NETTYPE=$1 shift SUBCHANNELS="$1" OPTIONS="" shift while [ $# -gt 0 ]; do case $1 in *=*) OPTIONS="$OPTIONS $1";; esac shift done OPTIONS=${OPTIONS## } echo "NETTYPE=\"${NETTYPE}\"" echo "OPTIONS=\"${OPTIONS}\"" return 0 } hw_bind() { local _netif="$1" local _macaddr="$2" [ -n "$_macaddr" ] \ && echo "MACADDR=\"$_macaddr\"" print_s390 "$_netif" \ && return 0 [ -n "$_macaddr" ] && return 0 is_persistent_ethernet_name "$_netif" && return 0 [ -f "/sys/class/net/$_netif/addr_assign_type" ] \ && [ "$(cat "/sys/class/net/$_netif/addr_assign_type")" != "0" ] \ && return 1 [ -f "/sys/class/net/$_netif/address" ] \ || return 1 echo "HWADDR=\"$(cat /sys/class/net/$_netif/address)\"" } interface_bind() { local _netif="$1" local _macaddr="$2" if [ ! -e "/sys/class/net/$_netif" ]; then derror "Cannot find network interface '$_netif'!" return 1 fi # see, if we can bind it to some hw parms if hw_bind "$_netif" "$_macaddr"; then # only print out DEVICE, if it's user assigned is_kernel_ethernet_name "$_netif" && return 0 fi echo "DEVICE=\"$_netif\"" } for netup in /tmp/net.*.did-setup ; do [ -f $netup ] || continue netif=${netup%%.did-setup} netif=${netif##*/net.} strglobin "$netif" ":*:*:*:*:" && continue [ -e /tmp/ifcfg/ifcfg-$netif ] && continue unset bridge unset bond unset bondslaves unset bondname unset bondoptions unset bridgename unset bridgeslaves unset team unset uuid unset ip unset gw unset mtu unset mask unset macaddr unset slave unset ethname unset vlan unset vlanname unset phydevice [ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info [ -e /tmp/bridge.${netif}.info ] && . /tmp/bridge.${netif}.info [ -e /tmp/team.${netif}.info ] && . /tmp/team.${netif}.info uuid=$(cat /proc/sys/kernel/random/uuid) if [ "$netif" = "$bridgename" ]; then bridge=yes elif [ "$netif" = "$teammaster" ]; then team=yes elif [ "$netif" = "$bondname" ]; then # $netif can't be bridge and bond at the same time bond=yes fi for i in /tmp/vlan.${netif}.*; do [ ! -e "$i" ] && continue . "$i" vlan=yes break done # skip team interfaces for now, the host config must be in sync [ "$netif" = "$teammaster" ] && continue { echo "# Generated by dracut initrd" echo "NAME=\"$netif\"" [ -z "$vlan" ] && interface_bind "$netif" "$macaddr" echo "ONBOOT=yes" echo "NETBOOT=yes" echo "UUID=\"$uuid\"" strstr "$(ip -6 addr show dev $netif)" 'inet6' && echo "IPV6INIT=yes" if [ -f /tmp/dhclient.$netif.lease ]; then [ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts if [ -f /tmp/net.$netif.has_ibft_config ]; then echo "BOOTPROTO=ibft" else echo "BOOTPROTO=dhcp" fi cp /tmp/dhclient.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease else # If we've booted with static ip= lines, the override file is there [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override if strglobin "$ip" '*:*:*'; then echo "IPV6INIT=yes" echo "IPV6_AUTOCONF=no" echo "IPV6ADDR=\"$ip/$mask\"" else if [ -f /tmp/net.$netif.has_ibft_config ]; then echo "BOOTPROTO=ibft" else echo "BOOTPROTO=none" echo "IPADDR=\"$ip\"" if strstr "$mask" "."; then echo "NETMASK=\"$mask\"" else echo "PREFIX=\"$mask\"" fi fi fi if strglobin "$gw" '*:*:*'; then echo "IPV6_DEFAULTGW=\"$gw\"" elif [ -n "$gw" ]; then echo "GATEWAY=\"$gw\"" fi fi [ -n "$mtu" ] && echo "MTU=\"$mtu\"" } > /tmp/ifcfg/ifcfg-$netif # bridge needs different things written to ifcfg if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ] && [ -z "$team" ]; then # standard interface echo "TYPE=Ethernet" >> /tmp/ifcfg/ifcfg-$netif fi if [ -n "$vlan" ] ; then { echo "TYPE=Vlan" echo "DEVICE=\"$netif\"" echo "VLAN=yes" echo "PHYSDEV=\"$phydevice\"" } >> /tmp/ifcfg/ifcfg-$netif fi if [ -n "$bond" ] ; then # bond interface { # This variable is an indicator of a bond interface for initscripts echo "BONDING_OPTS=\"$bondoptions\"" echo "NAME=\"$netif\"" echo "TYPE=Bond" } >> /tmp/ifcfg/ifcfg-$netif for slave in $bondslaves ; do # write separate ifcfg file for the raw eth interface ( echo "# Generated by dracut initrd" echo "NAME=\"$slave\"" echo "TYPE=Ethernet" echo "ONBOOT=yes" echo "NETBOOT=yes" echo "SLAVE=yes" echo "MASTER=\"$netif\"" echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\"" unset macaddr [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override interface_bind "$slave" "$macaddr" ) >> /tmp/ifcfg/ifcfg-$slave done fi if [ -n "$bridge" ] ; then # bridge { echo "TYPE=Bridge" echo "NAME=\"$netif\"" } >> /tmp/ifcfg/ifcfg-$netif for slave in $bridgeslaves ; do # write separate ifcfg file for the raw eth interface ( echo "# Generated by dracut initrd" echo "NAME=\"$slave\"" echo "TYPE=Ethernet" echo "ONBOOT=yes" echo "NETBOOT=yes" echo "BRIDGE=\"$bridgename\"" echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\"" unset macaddr [ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override interface_bind "$slave" "$macaddr" ) >> /tmp/ifcfg/ifcfg-$slave done fi i=1 for ns in $(getargs nameserver) $dns1 $dns2; do echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif i=$((i+1)) done [ -f /tmp/net.route6."$netif" ] && cp /tmp/net.route6."$netif" /tmp/ifcfg/route6-"$netif" [ -f /tmp/net.route."$netif" ] && cp /tmp/net.route."$netif" /tmp/ifcfg/route-"$netif" done # Pass network opts mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts mkdir -m 0755 -p /run/initramfs/state/var/lib/dhclient echo "files /etc/sysconfig/network-scripts" >> /run/initramfs/rwtab echo "files /var/lib/dhclient" >> /run/initramfs/rwtab { cp /tmp/net.* /run/initramfs/ for i in /tmp/net.*.resolv.conf; do [ -f "$i" ] && cat "$i" done | sort -u > /run/initramfs/state/etc/resolv.conf [ -s /run/initramfs/state/etc/resolv.conf ] || rm -f /run/initramfs/state/etc/resolv.conf copytree /tmp/ifcfg /run/initramfs/state/etc/sysconfig/network-scripts cp /tmp/ifcfg-leases/* /run/initramfs/state/var/lib/dhclient } > /dev/null 2>&1 modules.d/45ifcfg/module-setup.sh 0000755 00000000441 15053306611 0012646 0 ustar 00 #!/bin/bash # called by dracut check() { [[ -d /etc/sysconfig/network-scripts ]] && return 0 return 255 } # called by dracut depends() { echo "network" return 0 } # called by dracut install() { inst_binary sort inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh" } modules.d/06rngd/sysconfig 0000644 00000000072 15053306611 0011464 0 ustar 00 RNGD_ARGS="--fill-watermark=0 -x pkcs11 -x nist -x qrypt" modules.d/06rngd/module-setup.sh 0000644 00000002454 15053306611 0012522 0 ustar 00 #!/bin/bash # vim: set tabstop=8 shiftwidth=4 softtabstop=4 expandtab smarttab colorcolumn=80: # # Copyright (c) 2019 Red Hat, Inc. # Author: Renaud Métrich <rmetrich@redhat.com> # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # depends() { echo systemd return 0 } check() { # if there's no rngd binary, no go. require_binaries rngd || return 1 return 0 } install() { inst rngd inst_simple "${systemdsystemunitdir}/rngd.service" if [ -r /etc/sysconfig/rngd ]; then inst_simple "${moddir}/sysconfig" "/etc/sysconfig/rngd" fi # make sure dependant libs are installed too inst_libdir_file opensc-pkcs11.so systemctl -q --root "$initdir" add-wants sysinit.target rngd.service } modules.d/99shutdown/shutdown.sh 0000755 00000006066 15053306611 0012715 0 ustar 00 #!/bin/sh # # Licensed under the GPLv2 # # Copyright 2011, Red Hat, Inc. # Harald Hoyer <harald@redhat.com> ACTION="$1" [ -w /dev/console ] && exec </dev/console >>/dev/console 2>>/dev/console export TERM=linux export PATH=/usr/sbin:/usr/bin:/sbin:/bin . /lib/dracut-lib.sh if [ "$(stat -c '%T' -f /)" = "tmpfs" ]; then mount -o remount,rw / fi mkdir /oldsys for i in sys proc run dev; do mkdir /oldsys/$i mount --move /oldroot/$i /oldsys/$i done # if "kexec" was installed after creating the initramfs, we try to copy it from the real root # libz normally is pulled in via kmod/modprobe and udevadm if [ "$ACTION" = "kexec" ] && ! command -v kexec >/dev/null 2>&1; then for p in /usr/sbin /usr/bin /sbin /bin; do cp -a /oldroot/${p}/kexec $p >/dev/null 2>&1 && break done hash kexec fi trap "emergency_shell --shutdown shutdown Signal caught!" 0 getarg 'rd.break=pre-shutdown' && emergency_shell --shutdown pre-shutdown "Break before pre-shutdown" source_hook pre-shutdown warn "Killing all remaining processes" killall_proc_mountpoint /oldroot || sleep 0.2 umount_a() { local _did_umount="n" while read a mp a || [ -n "$mp" ]; do if strstr "$mp" oldroot; then if umount "$mp"; then _did_umount="y" warn "Unmounted $mp." fi fi done </proc/mounts losetup -D [ "$_did_umount" = "y" ] && return 0 return 1 } _cnt=0 while [ $_cnt -le 40 ]; do umount_a 2>/dev/null || break _cnt=$(($_cnt+1)) done [ $_cnt -ge 40 ] && umount_a if strstr "$(cat /proc/mounts)" "/oldroot"; then warn "Cannot umount /oldroot" for _pid in /proc/*; do _pid=${_pid##/proc/} case $_pid in *[!0-9]*) continue;; esac [ $_pid -eq $$ ] && continue [ -e "/proc/$_pid/exe" ] || continue [ -e "/proc/$_pid/root" ] || continue if strstr "$(ls -l /proc/$_pid /proc/$_pid/fd 2>/dev/null)" "oldroot"; then warn "Blocking umount of /oldroot [$_pid] $(cat /proc/$_pid/cmdline)" else warn "Still running [$_pid] $(cat /proc/$_pid/cmdline)" fi ls -l "/proc/$_pid/exe" 2>&1 | vwarn ls -l "/proc/$_pid/fd" 2>&1 | vwarn done fi _check_shutdown() { local __f local __s=0 for __f in $hookdir/shutdown/*.sh; do [ -e "$__f" ] || continue ( . "$__f" $1 ) if [ $? -eq 0 ]; then rm -f -- $__f else __s=1 fi done return $__s } _cnt=0 while [ $_cnt -le 40 ]; do _check_shutdown && break _cnt=$(($_cnt+1)) done [ $_cnt -ge 40 ] && _check_shutdown final getarg 'rd.break=shutdown' && emergency_shell --shutdown shutdown "Break before shutdown" case "$ACTION" in reboot|poweroff|halt) $ACTION -f -d -n warn "$ACTION failed!" ;; kexec) kexec -e warn "$ACTION failed!" reboot -f -d -n ;; *) warn "Shutdown called with argument '$ACTION'. Rebooting!" reboot -f -d -n ;; esac emergency_shell --shutdown shutdown modules.d/99shutdown/module-setup.sh 0000755 00000001111 15053306611 0013447 0 ustar 00 #!/bin/bash # called by dracut check() { return 0 } # called by dracut depends() { echo base return 0 } # called by dracut install() { local _d inst_multiple umount poweroff reboot halt losetup stat sleep inst_multiple -o kexec inst "$moddir/shutdown.sh" "$prefix/shutdown" [ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib mkdir -m 0755 -p ${initdir}/lib/dracut mkdir -m 0755 -p ${initdir}/lib/dracut/hooks for _d in $hookdirs shutdown shutdown-emergency; do mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d done } modules.d/95resume/parse-resume.sh 0000755 00000007047 15053306611 0013073 0 ustar 00 #!/bin/sh if resume=$(getarg resume=) && ! getarg noresume; then export resume echo "$resume" >/.resume else unset resume fi case "$resume" in LABEL=*) \ resume="$(echo $resume | sed 's,/,\\x2f,g')" resume="/dev/disk/by-label/${resume#LABEL=}" ;; UUID=*) \ resume="/dev/disk/by-uuid/${resume#UUID=}" ;; PARTUUID=*) \ resume="/dev/disk/by-partuuid/${resume#PARTUUID=}" ;; PARTLABEL=*) \ resume="/dev/disk/by-partlabel/${resume#PARTLABEL=}" ;; esac if splash=$(getarg splash=); then export splash else unset splash fi case "$splash" in quiet ) a_splash="-P splash=y" ;; * ) a_splash="-P splash=n" ;; esac if ! getarg noresume; then if [ -n "$resume" ]; then wait_for_dev /dev/resume { printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \ ${resume#/dev/}; printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \ ${resume#/dev/}; } >> /etc/udev/rules.d/99-resume-link.rules { if [ -x /usr/sbin/resume ]; then printf -- 'KERNEL=="%s", ' "${resume#/dev/}" printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",' printf -- " RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \ "$a_splash" "$resume"; printf -- 'SYMLINK=="%s", ' "${resume#/dev/}" printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",' printf -- " RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \ "$a_splash" "$resume"; fi printf -- 'KERNEL=="%s", ' "${resume#/dev/}" printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",' printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"' printf -- 'SYMLINK=="%s", ' "${resume#/dev/}" printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",' printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"' } >> /etc/udev/rules.d/99-resume.rules printf '[ -e "%s" ] && { ln -fs "%s" /dev/resume 2> /dev/null; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \ "$resume" "$resume" "$hookdir" >> $hookdir/initqueue/settled/resume.sh { printf -- "%s" 'warn "Cancelling resume operation. Device not found.";' printf -- ' cancel_wait_for_dev /dev/resume; rm -f -- "$job" "%s/initqueue/settled/resume.sh";\n' "$hookdir" } >> $hookdir/initqueue/timeout/resume.sh mv /lib/dracut/resume.sh /lib/dracut/hooks/pre-mount/10-resume.sh else { if [ -x /usr/sbin/resume ]; then printf -- '%s' 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",' printf -- ' RUN+="/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s $tempnode"\n' "$a_splash" fi printf -- '%s' 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",' printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"'; } >> /etc/udev/rules.d/99-resume.rules fi fi modules.d/95resume/module-setup.sh 0000755 00000003600 15053306611 0013075 0 ustar 00 #!/bin/bash # called by dracut check() { # No point trying to support resume, if no swap partition exist [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ $fs =~ ^(swap|swsuspend|swsupend)$ ]] && return 0 done return 255 } return 0 } # called by dracut cmdline() { local _resume for dev in "${!host_fs_types[@]}"; do [[ ${host_fs_types[$dev]} =~ ^(swap|swsuspend|swsupend)$ ]] || continue _resume=$(shorten_persistent_dev "$(get_persistent_dev "$dev")") [[ -n ${_resume} ]] && printf " resume=%s" "${_resume}" done } # called by dracut install() { local _bin if [[ $hostonly_cmdline == "yes" ]]; then local _resumeconf=$(cmdline) [[ $_resumeconf ]] && printf "%s\n" "$_resumeconf" >> "${initdir}/etc/cmdline.d/95resume.conf" fi # if systemd is included and has the hibernate-resume tool, use it and nothing else if dracut_module_included "systemd" && [[ -x $systemdutildir/systemd-hibernate-resume ]]; then inst_multiple -o \ $systemdutildir/system-generators/systemd-hibernate-resume-generator \ $systemdsystemunitdir/systemd-hibernate-resume@.service \ $systemdutildir/systemd-hibernate-resume return 0 fi # Optional uswsusp support for _bin in /usr/sbin/resume /usr/lib/suspend/resume /usr/lib/uswsusp/resume do [[ -x "${_bin}" ]] && { inst "${_bin}" /usr/sbin/resume [[ $hostonly ]] && [[ -f /etc/suspend.conf ]] && inst -H /etc/suspend.conf break } done if ! dracut_module_included "systemd"; then inst_hook cmdline 10 "$moddir/parse-resume.sh" else inst_script "$moddir/parse-resume.sh" /lib/dracut/parse-resume.sh fi inst_script "$moddir/resume.sh" /lib/dracut/resume.sh } modules.d/95resume/resume.sh 0000755 00000001060 15053306611 0011750 0 ustar 00 #!/bin/sh PATH=/usr/sbin:/usr/bin:/sbin:/bin [ -s /.resume -a -b "$resume" ] && { # First try user level resume; it offers splash etc case "$splash" in quiet ) a_splash="-P splash=y" ;; * ) a_splash="-P splash=n" ;; esac [ -x "$(command -v resume)" ] && command resume $a_splash "$resume" # parsing the output of ls is Bad, but until there is a better way... ls -lH "$resume" | ( read x x x x maj min x; echo "${maj%,}:$min"> /sys/power/resume) >/.resume } modules.d/95nvmf/parse-nvmf-boot-connections.sh 0000755 00000007336 15053306611 0015471 0 ustar 00 #!/bin/sh # # Supported formats: # nvmf.hostnqn=<hostnqn> # nvmf.hostid=<hostid> # nvmf.discover=<transport>:<traddr>:<host-traddr>:<trsvcid> # # Examples: # nvmf.hostnqn=nqn.2014-08.org.nvmexpress:uuid:37303738-3034-584d-5137-333230423843 # nvmf.discover=rdma:192.168.1.3::4420 # nvme.discover=tcp:192.168.1.3::4420 # nvme.discover=tcp:192.168.1.3 # nvmf.discover=fc:auto # # Note: FC does autodiscovery, so typically there is no need to # specify any discover parameters for FC. # type is_ip >/dev/null 2>&1 || . /lib/net-lib.sh if getargbool 0 rd.nonvmf ; then warn "rd.nonvmf=0: skipping nvmf" return 0 fi initqueue --onetime modprobe --all -b -q nvme nvme_tcp nvme_core nvme_fabrics traddr="none" trtype="none" hosttraddr="none" trsvcid=4420 validate_ip_conn() { if ! getargbool 0 rd.neednet ; then warn "$trtype transport requires rd.neednet=1" return 1 fi local_address=$(ip -o route get to $traddr | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p') # confirm we got a local IP address if ! is_ip "$local_address" ; then warn "$traddr is an invalid address"; return 1 fi ifname=$(ip -o route get to $local_address | sed -n 's/.*dev \([^ ]*\).*/\1/p') if ip l show "$ifname" >/dev/null 2>&1 ; then warn "invalid network interface $ifname" return 1 fi # confirm there's a route to destination if ip route get "$traddr" >/dev/null 2>&1 ; then warn "no route to $traddr" return 1 fi } parse_nvmf_discover() { OLDIFS="$IFS" IFS=: set $1 IFS="$OLDIFS" case $# in 2) [ -n "$1" ] && trtype=$1 [ -n "$2" ] && traddr=$2 ;; 3) [ -n "$1" ] && trtype=$1 [ -n "$2" ] && traddr=$2 [ -n "$3" ] && hosttraddr=$3 ;; 4) [ -n "$1" ] && trtype=$1 [ -n "$2" ] && traddr=$2 [ -n "$3" ] && hosttraddr=$3 [ -n "$4" ] && trsvcid=$4 ;; *) warn "Invalid arguments for nvmf.discover=$1" return 1 ;; esac if [ "$traddr" = "none" ] ; then warn "traddr is mandatory for $trtype" return 1; fi if [ "$trtype" = "fc" ] ; then if [ "$hosttraddr" = "none" ] ; then warn "host traddr is mandatory for fc" return 1 fi elif [ "$trtype" != "rdma" ] && [ "$trtype" != "tcp" ] ; then warn "unsupported transport $trtype" return 1 fi if [ "$trtype" = "tcp" ]; then validate_ip_conn fi echo "--transport=$trtype --traddr=$traddr --host-traddr=$hosttraddr --trsvcid=$trsvcid" >> /etc/nvme/discovery.conf } nvmf_hostnqn=$(getarg nvmf.hostnqn=) if [ -n "$nvmf_hostnqn" ] ; then echo "$nvmf_hostnqn" > /etc/nvme/hostnqn fi nvmf_hostid=$(getarg nvmf.hostid=) if [ -n "$nvmf_hostid" ] ; then echo "$nvmf_hostid" > /etc/nvme/hostid fi for d in $(getargs nvmf.discover=); do parse_nvmf_discover "$d" done # Host NQN and host id are mandatory for NVMe-oF [ -f "/etc/nvme/hostnqn" ] || exit 0 [ -f "/etc/nvme/hostid" ] || exit 0 if [ -f "/etc/nvme/discovery.conf" ] ; then if [ "$trtype" = "tcp" ] ; then /sbin/initqueue --settled --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all > /tmp/net.$ifname.did-setup else /sbin/initqueue --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all fi else if [ "$trtype" = "tcp" ] ; then /sbin/initqueue --settled --onetime --unique /usr/sbin/nvme connect-all -t tcp -a $traddr -s $trsvcid > /tmp/net.$ifname.did-setup else /sbin/initqueue --finished --onetime --unique --name nvme-fc-autoconnect /sbin/nvmf-autoconnect.sh fi fi modules.d/95nvmf/nvmf-autoconnect.sh 0000644 00000000210 15053306611 0013375 0 ustar 00 #!/bin/bash [ -f /sys/class/fc/fc_udev_device/nvme_discovery ] || exit 1 echo add > /sys/class/fc/fc_udev_device/nvme_discovery exit 0 modules.d/95nvmf/module-setup.sh 0000755 00000004741 15053306611 0012552 0 ustar 00 #!/bin/bash # called by dracut check() { require_binaries nvme || return 1 [ -f /etc/nvme/hostnqn ] || return 255 [ -f /etc/nvme/hostid ] || return 255 is_nvmf() { local _dev=$1 local trtype [[ -L "/sys/dev/block/$_dev" ]] || return 0 cd -P "/sys/dev/block/$_dev" || return 0 if [ -f partition ] ; then cd .. fi for d in device/nvme* ; do [ -L "$d" ] || continue if readlink "$d" | grep -q nvme-fabrics ; then trtype=$(cat "$d"/transport) break fi done [[ "$trtype" == "fc" ]] || [[ "$trtype" == "tcp" ]] || [[ "$trtype" == "rdma" ]] } [[ $hostonly ]] || [[ $mount_needs ]] && { pushd . >/dev/null for_each_host_dev_and_slaves is_nvmf local _is_nvmf=$? popd >/dev/null [[ $_is_nvmf == 0 ]] || return 255 if [ ! -f /sys/class/fc/fc_udev_device/nvme_discovery ] ; then if [ ! -f /etc/nvme/discovery.conf ] ; then echo "No discovery arguments present" return 255 fi fi } return 0 } # called by dracut depends() { echo bash rootfs-block network return 0 } # called by dracut installkernel() { instmods nvme_fc lpfc qla2xxx hostonly="" instmods nvme_tcp nvme_fabrics } # called by dracut cmdline() { local _hostnqn local _hostid if [ -f /etc/nvme/hostnqn ] ; then _hostnqn=$(cat /etc/nvme/hostnqn) echo -n " nvmf.hostnqn=${_hostnqn}" fi if [ -f /etc/nvme/hostid ] ; then _hostid=$(cat /etc/nvme/hostid) echo -n " nvmf.hostid=${_hostid}" fi echo "" } # called by dracut install() { if [[ $hostonly_cmdline == "yes" ]]; then local _nvmf_args=$(cmdline) [[ "$_nvmf_args" ]] && printf "%s" "$_nvmf_args" >> "${initdir}/etc/cmdline.d/95nvmf-args.conf" fi inst_simple "/etc/nvme/hostnqn" inst_simple "/etc/nvme/hostid" inst_multiple ip sed inst_script "${moddir}/nvmf-autoconnect.sh" /sbin/nvmf-autoconnect.sh inst_multiple nvme inst_multiple -o \ "$systemdsystemunitdir/nvm*-connect@.service" \ "$systemdsystemunitdir/nvm*-connect.target" inst_hook cmdline 99 "$moddir/parse-nvmf-boot-connections.sh" inst_simple "/etc/nvme/discovery.conf" inst_rules /usr/lib/udev/rules.d/70-nvm*-autoconnect.rules inst_rules /usr/lib/udev/rules.d/71-nvmf-iopolicy-netapp.rules dracut_need_initqueue } modules.d/01fips/fips.sh 0000755 00000013035 15053306611 0011042 0 ustar 00 #!/bin/sh mount_boot() { boot=$(getarg boot=) if [ -n "$boot" ]; then case "$boot" in LABEL=*) boot="$(echo $boot | sed 's,/,\\x2f,g')" boot="/dev/disk/by-label/${boot#LABEL=}" ;; UUID=*) boot="/dev/disk/by-uuid/${boot#UUID=}" ;; PARTUUID=*) boot="/dev/disk/by-partuuid/${boot#PARTUUID=}" ;; PARTLABEL=*) boot="/dev/disk/by-partlabel/${boot#PARTLABEL=}" ;; /dev/*) ;; *) die "You have to specify boot=<boot device> as a boot option for fips=1" ;; esac if ! [ -e "$boot" ]; then udevadm trigger --action=add >/dev/null 2>&1 [ -z "$UDEVVERSION" ] && UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; }) i=0 while ! [ -e $boot ]; do if [ $UDEVVERSION -ge 143 ]; then udevadm settle --exit-if-exists=$boot else udevadm settle --timeout=30 fi [ -e $boot ] && break sleep 0.5 i=$(($i+1)) [ $i -gt 40 ] && break done fi [ -e "$boot" ] || return 1 mkdir /boot info "Mounting $boot as /boot" mount -oro "$boot" /boot || return 1 elif [ -d "$NEWROOT/boot" ]; then rm -fr -- /boot ln -sf "$NEWROOT/boot" /boot fi } do_rhevh_check() { KERNEL=$(uname -r) kpath=${1} # If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0 HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done) HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done || return 1) if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then warn "HMAC sum mismatch" return 1 fi info "rhevh_check OK" return 0 } fips_load_crypto() { FIPSMODULES=$(cat /etc/fipsmodules) info "Loading and integrity checking all crypto modules" mv /etc/modprobe.d/fips.conf /etc/modprobe.d/fips.conf.bak for _module in $FIPSMODULES; do if [ "$_module" != "tcrypt" ]; then if ! modprobe "${_module}" 2>/tmp/fips.modprobe_err; then # check if kernel provides generic algo _found=0 while read _k _s _v || [ -n "$_k" ]; do [ "$_k" != "name" -a "$_k" != "driver" ] && continue [ "$_v" != "$_module" ] && continue _found=1 break done </proc/crypto [ "$_found" = "0" ] && cat /tmp/fips.modprobe_err >&2 && return 1 fi fi done mv /etc/modprobe.d/fips.conf.bak /etc/modprobe.d/fips.conf info "Self testing crypto algorithms" modprobe tcrypt || return 1 rmmod tcrypt } do_fips() { local _v local _s local _v local _module KERNEL=$(uname -r) info "Checking integrity of kernel" if [ -e "/run/initramfs/live/vmlinuz0" ]; then do_rhevh_check /run/initramfs/live/vmlinuz0 || return 1 elif [ -e "/run/initramfs/live/isolinux/vmlinuz0" ]; then do_rhevh_check /run/initramfs/live/isolinux/vmlinuz0 || return 1 else BOOT_IMAGE="$(getarg BOOT_IMAGE)" # On s390x, BOOT_IMAGE isn't a path but an integer representing the # entry number selected. Let's try the root of /boot first, and # otherwise fallback to trying to parse the BLS entries if it's a # BLS-based system. if [ "$(uname -m)" = s390x ]; then if [ -e "/boot/vmlinuz-${KERNEL}" ]; then BOOT_IMAGE="vmlinuz-${KERNEL}" elif [ -d /boot/loader/entries ]; then i=0 for bls in $(ls -d /boot/loader/entries/*.conf | sort -rV); do if [ $i -eq ${BOOT_IMAGE:-0} ] && [ -r "$bls" ]; then BOOT_IMAGE="$(grep -e '^linux' "$bls" | grep -o ' .*$')" BOOT_IMAGE=${BOOT_IMAGE:1} break fi ((i++)) done fi fi # Trim off any leading GRUB boot device (e.g. ($root) ) BOOT_IMAGE="$(echo "${BOOT_IMAGE}" | sed 's/^(.*)//')" BOOT_IMAGE_NAME="${BOOT_IMAGE##*/}" BOOT_IMAGE_PATH="${BOOT_IMAGE%${BOOT_IMAGE_NAME}}" if [ -z "$BOOT_IMAGE_NAME" ]; then BOOT_IMAGE_NAME="vmlinuz-${KERNEL}" elif ! [ -e "/boot/${BOOT_IMAGE_PATH}/${BOOT_IMAGE_NAME}" ]; then #if /boot is not a separate partition BOOT_IMAGE might start with /boot BOOT_IMAGE_PATH=${BOOT_IMAGE_PATH#"/boot"} #on some achitectures BOOT_IMAGE does not contain path to kernel #so if we can't find anything, let's treat it in the same way as if it was empty if ! [ -e "/boot/${BOOT_IMAGE_PATH}/${BOOT_IMAGE_NAME}" ]; then BOOT_IMAGE_NAME="vmlinuz-${KERNEL}" BOOT_IMAGE_PATH="" fi fi BOOT_IMAGE_HMAC="/boot/${BOOT_IMAGE_PATH}/.${BOOT_IMAGE_NAME}.hmac" if ! [ -e "${BOOT_IMAGE_HMAC}" ]; then warn "${BOOT_IMAGE_HMAC} does not exist" return 1 fi (cd "${BOOT_IMAGE_HMAC%/*}" && sha512hmac -c "${BOOT_IMAGE_HMAC}") || return 1 fi info "All initrd crypto checks done" > /tmp/fipsdone umount /boot >/dev/null 2>&1 return 0 } modules.d/01fips/fips-boot.sh 0000755 00000000411 15053306611 0011775 0 ustar 00 #!/bin/sh if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1 elif getarg boot= >/dev/null; then . /sbin/fips.sh if mount_boot; then do_fips || die "FIPS integrity test failed" fi fi modules.d/01fips/fips-noboot.sh 0000755 00000000364 15053306611 0012341 0 ustar 00 #!/bin/sh if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1 elif ! [ -f /tmp/fipsdone ]; then . /sbin/fips.sh mount_boot do_fips || die "FIPS integrity test failed" fi modules.d/01fips/module-setup.sh 0000755 00000004621 15053306611 0012525 0 ustar 00 #!/bin/bash # called by dracut check() { return 0 } # called by dracut depends() { return 0 } # called by dracut installkernel() { local _fipsmodules _mod _bootfstype if [[ -f "${srcmods}/modules.fips" ]]; then _fipsmodules="$(cat "${srcmods}/modules.fips")" else _fipsmodules="" # Hashes: _fipsmodules+="sha1 sha224 sha256 sha384 sha512 " _fipsmodules+="sha3-224 sha3-256 sha3-384 sha3-512 " _fipsmodules+="crc32c crct10dif ghash " # Ciphers: _fipsmodules+="cipher_null des3_ede aes cfb dh ecdh " # Modes/templates: _fipsmodules+="ecb cbc ctr xts gcm ccm authenc hmac cmac " # Compression algs: _fipsmodules+="deflate lzo zlib " # PRNG algs: _fipsmodules+="ansi_cprng " # Misc: _fipsmodules+="aead cryptomgr tcrypt crypto_user " fi mkdir -m 0755 -p "${initdir}/etc/modprobe.d" for _mod in $_fipsmodules; do if hostonly='' instmods -c -s $_mod; then echo $_mod >> "${initdir}/etc/fipsmodules" echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf" fi done # with hostonly_default_device fs module for /boot is not installed by default if [[ $hostonly ]] && [[ "$hostonly_default_device" == "no" ]]; then _bootfstype=$(find_mp_fstype /boot) if [[ -n "$_bootfstype" ]]; then hostonly='' instmods $_bootfstype else dwarning "Can't determine fs type for /boot, FIPS check may fail." fi fi } # called by dracut install() { local _dir inst_hook pre-trigger 01 "$moddir/fips-boot.sh" inst_hook pre-pivot 01 "$moddir/fips-noboot.sh" inst_hook pre-udev 01 "$moddir/fips-load-crypto.sh" inst_script "$moddir/fips.sh" /sbin/fips.sh inst_multiple sha512hmac rmmod insmod mount uname umount grep sort inst_simple /etc/system-fips [ -c ${initdir}/dev/random ] || mknod ${initdir}/dev/random c 1 8 \ || { dfatal "Cannot create /dev/random" dfatal "To create an initramfs with fips support, dracut has to run as root" return 1 } [ -c ${initdir}/dev/urandom ] || mknod ${initdir}/dev/urandom c 1 9 \ || { dfatal "Cannot create /dev/random" dfatal "To create an initramfs with fips support, dracut has to run as root" return 1 } } modules.d/01fips/fips-load-crypto.sh 0000644 00000000321 15053306611 0013264 0 ustar 00 #!/bin/sh if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1 else . /sbin/fips.sh fips_load_crypto || die "FIPS integrity test failed" fi modules.d/95iscsi/mount-lun.sh 0000755 00000000514 15053306611 0012223 0 ustar 00 #!/bin/sh if [ -z $iscsi_lun ]; then iscsi_lun=0 fi NEWROOT=${NEWROOT:-"/sysroot"} for disk in /dev/disk/by-path/*-iscsi-*-$iscsi_lun; do if mount -t ${fstype:-auto} -o "$rflags" $disk $NEWROOT; then if [ ! -d $NEWROOT/proc ]; then umount $disk continue fi break fi done modules.d/95iscsi/iscsiroot.sh 0000755 00000024610 15053306611 0012306 0 ustar 00 #!/bin/sh # # This implementation is incomplete: Discovery mode is not implemented and # the argument handling doesn't follow currently agreed formats. This is mainly # because rfc4173 does not say anything about iscsi_initiator but open-iscsi's # iscsistart needs this. # type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh PATH=/usr/sbin:/usr/bin:/sbin:/bin # Huh? Empty $1? [ -z "$1" ] && exit 1 # Huh? Empty $2? [ -z "$2" ] && exit 1 # Huh? Empty $3? This isn't really necessary, since NEWROOT isn't # used here. But let's be consistent [ -z "$3" ] && exit 1 # root is in the form root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname> netif="$1" iroot="$2" # If it's not iscsi we don't continue [ "${iroot%%:*}" = "iscsi" ] || exit 1 iroot=${iroot#iscsi} iroot=${iroot#:} # XXX modprobe crc32c should go in the cmdline parser, but I haven't yet # figured out a way how to check whether this is built-in or not modprobe crc32c 2>/dev/null if [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then iscsiuio > /tmp/iscsiuio-started fi handle_firmware() { local ifaces retry # Depending on the 'ql4xdisablesysfsboot' qla4xxx # will be autostarting sessions without presenting # them via the firmware interface. # In these cases 'iscsiadm -m fw' will fail, but # the iSCSI sessions will still be present. if ! iscsiadm -m fw; then warn "iscsiadm: Could not get list of targets from firmware." else ifaces=$(set -- /sys/firmware/ibft/ethernet*; echo $#) retry=$(cat /tmp/session-retry) if [ $retry -lt $ifaces ]; then retry=$((retry+1)) echo $retry > /tmp/session-retry return 1 else rm /tmp/session-retry fi if ! iscsiadm -m fw -l; then warn "iscsiadm: Log-in to iscsi target failed" else need_shutdown fi fi [ -d /sys/class/iscsi_session ] || return 1 echo 'started' > "/tmp/iscsistarted-iscsi:" echo 'started' > "/tmp/iscsistarted-firmware" return 0 } handle_netroot() { local iscsi_initiator iscsi_target_name iscsi_target_ip iscsi_target_port local iscsi_target_group iscsi_protocol iscsirw iscsi_lun local iscsi_username iscsi_password local iscsi_in_username iscsi_in_password local iscsi_iface_name iscsi_netdev_name local iscsi_param param local p found local login_retry_max_seen= # override conf settings by command line options arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) [ -n "$arg" ] && iscsi_initiator=$arg arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=) [ -n "$arg" ] && iscsi_target_group=$arg arg=$(getarg rd.iscsi.username -d iscsi_username=) [ -n "$arg" ] && iscsi_username=$arg arg=$(getarg rd.iscsi.password -d iscsi_password) [ -n "$arg" ] && iscsi_password=$arg arg=$(getarg rd.iscsi.in.username -d iscsi_in_username=) [ -n "$arg" ] && iscsi_in_username=$arg arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=) [ -n "$arg" ] && iscsi_in_password=$arg for p in $(getargs rd.iscsi.param -d iscsi_param); do [ "${p%=*}" = node.session.initial_login_retry_max ] && \ login_retry_max_seen=yes iscsi_param="$iscsi_param $p" done # this sets iscsi_target_name and possibly overwrites most # parameters read from the command line above parse_iscsi_root "$1" || return 1 # Bail out early, if there is no route to the destination if is_ip "$iscsi_target_ip" && [ "$netif" != "timeout" ] && ! all_ifaces_setup && getargbool 1 rd.iscsi.testroute; then ip route get "$iscsi_target_ip" >/dev/null 2>&1 || return 0 fi #limit iscsistart login retries if [ "$login_retry_max_seen" != yes ]; then retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max) if [ $retries -gt 0 ]; then iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries" fi fi # XXX is this needed? getarg ro && iscsirw=ro getarg rw && iscsirw=rw fsopts=${fsopts:+$fsopts,}${iscsirw} if [ -z "$iscsi_initiator" ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name) echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi rm -f /etc/iscsi/initiatorname.iscsi mkdir -p /etc/iscsi ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi > /tmp/iscsi_set_initiator if [ -n "$DRACUT_SYSTEMD" ]; then systemctl try-restart iscsid # FIXME: iscsid is not yet ready, when the service is :-/ sleep 1 fi fi if [ -z "$iscsi_initiator" ]; then [ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi iscsi_initiator=$InitiatorName fi if [ -z "$iscsi_initiator" ]; then iscsi_initiator=$(iscsi-iname) echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi rm -f /etc/iscsi/initiatorname.iscsi mkdir -p /etc/iscsi ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi > /tmp/iscsi_set_initiator if [ -n "$DRACUT_SYSTEMD" ]; then systemctl try-restart iscsid # FIXME: iscsid is not yet ready, when the service is :-/ sleep 1 fi fi if [ -z "$iscsi_target_port" ]; then iscsi_target_port=3260 fi if [ -z "$iscsi_target_group" ]; then iscsi_target_group=1 fi if [ -z "$iscsi_lun" ]; then iscsi_lun=0 fi echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then mkdir -p /etc/iscsi ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi if [ -n "$DRACUT_SYSTEMD" ]; then systemctl try-restart iscsid # FIXME: iscsid is not yet ready, when the service is :-/ sleep 1 fi fi if [ -z "$DRACUT_SYSTEMD" ]; then iscsid sleep 2 fi # FIXME $iscsi_protocol?? if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then # if root is not specified try to mount the whole iSCSI LUN printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "$iscsi_lun" >> /etc/udev/rules.d/99-iscsi-root.rules udevadm control --reload write_fs_tab /dev/root wait_for_dev -n /dev/root # install mount script [ -z "$DRACUT_SYSTEMD" ] && \ echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > $hookdir/mount/01-$$-iscsi.sh fi targets=$(iscsiadm -m discovery -t st -p $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} | sed 's/^.*iqn/iqn/') [ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && return 1 found= for target in $targets; do if [ "$target" = "$iscsi_target_name" ]; then if [ -n "$iscsi_iface_name" ]; then iscsiadm -m iface -I $iscsi_iface_name --op=new EXTRA=" ${iscsi_netdev_name:+--name=iface.net_ifacename --value=$iscsi_netdev_name} " EXTRA="$EXTRA ${iscsi_initiator:+--name=iface.initiatorname --value=$iscsi_initiator} " fi [ -n "$iscsi_param" ] && for param in $iscsi_param; do EXTRA="$EXTRA --name=${param%=*} --value=${param#*=}"; done CMD="iscsiadm -m node -T $target \ ${iscsi_iface_name:+-I $iscsi_iface_name} \ -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port}" __op="--op=update \ --name=node.startup --value=onboot \ ${iscsi_username:+ --name=node.session.auth.username --value=$iscsi_username} \ ${iscsi_password:+ --name=node.session.auth.password --value=$iscsi_password} \ ${iscsi_in_username:+--name=node.session.auth.username_in --value=$iscsi_in_username} \ ${iscsi_in_password:+--name=node.session.auth.password_in --value=$iscsi_in_password} \ $EXTRA \ $NULL" $CMD $__op if [ "$netif" != "timeout" ]; then $CMD --login fi found=yes break fi done if [ "$netif" = "timeout" ]; then iscsiadm -m node -L onboot || : elif [ "$found" != yes ]; then warn "iSCSI target \"$iscsi_target_name\" not found on portal $iscsi_target_ip:$iscsi_target_port" return 1 fi > $hookdir/initqueue/work netroot_enc=$(str_replace "$1" '/' '\2f') echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}" return 0 } ret=0 if [ "$netif" != "timeout" ] && getargbool 0 rd.iscsi.waitnet; then all_ifaces_setup || exit 0 fi if [ "$netif" = "timeout" ] && all_ifaces_setup; then # s.th. went wrong and the timeout script hits # restart systemctl restart iscsid # damn iscsid is not ready after unit says it's ready sleep 2 fi if getargbool 0 rd.iscsi.firmware -d -y iscsi_firmware ; then if [ "$netif" = "timeout" ] || [ "$netif" = "online" ] || [ "$netif" = "dummy" ]; then [ -f /tmp/session-retry ] || echo 1 > /tmp/session-retry handle_firmware ret=$? fi fi if ! [ "$netif" = "online" ]; then # loop over all netroot parameter if nroot=$(getarg netroot) && [ "$nroot" != "dhcp" ]; then for nroot in $(getargs netroot); do [ "${nroot%%:*}" = "iscsi" ] || continue nroot="${nroot##iscsi:}" if [ -n "$nroot" ]; then handle_netroot "$nroot" ret=$(($ret + $?)) fi done else if [ -n "$iroot" ]; then handle_netroot "$iroot" ret=$? fi fi fi need_shutdown # now we have a root filesystem somewhere in /dev/sd* # let the normal block handler handle root= exit $ret modules.d/95iscsi/parse-iscsiroot.sh 0000755 00000013723 15053306611 0013421 0 ustar 00 #!/bin/sh # # Preferred format: # root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname> # [root=*] netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname> # # Legacy formats: # [net]root=[iscsi] iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname> # [net]root=[iscsi] iscsi_firmware # # root= takes precedence over netroot= if root=iscsi[...] # # This script is sourced, so root should be set. But let's be paranoid [ -z "$root" ] && root=$(getarg root=) if [ -z "$netroot" ]; then for nroot in $(getargs netroot=); do [ "${nroot%%:*}" = "iscsi" ] && break done if [ "${nroot%%:*}" = "iscsi" ]; then netroot="$nroot" else for nroot in $(getargs netroot=); do [ "${nroot%%:*}" = "dhcp" ] && break done netroot="$nroot" fi fi [ -z "$iscsiroot" ] && iscsiroot=$(getarg iscsiroot=) [ -z "$iscsi_firmware" ] && getargbool 0 rd.iscsi.firmware -y iscsi_firmware && iscsi_firmware="1" [ -n "$iscsiroot" ] && [ -n "$iscsi_firmware" ] && die "Mixing iscsiroot and iscsi_firmware is dangerous" type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh # Root takes precedence over netroot if [ "${root%%:*}" = "iscsi" ] ; then if [ -n "$netroot" ] ; then echo "Warning: root takes precedence over netroot. Ignoring netroot" fi netroot=$root # if root is not specified try to mount the whole iSCSI LUN printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules [ -n "$DRACUT_SYSTEMD" ] && systemctl is-active systemd-udevd && udevadm control --reload-rules root=/dev/root write_fs_tab /dev/root fi # If it's not empty or iscsi we don't continue for nroot in $(getargs netroot); do [ "${nroot%%:*}" = "iscsi" ] || continue netroot="$nroot" break done # Root takes precedence over netroot if [ "${root}" = "/dev/root" ] && getarg "netroot=dhcp" ; then # if root is not specified try to mount the whole iSCSI LUN printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules [ -n "$DRACUT_SYSTEMD" ] && systemctl is-active systemd-udevd && udevadm control --reload-rules fi if [ -n "$iscsiroot" ] ; then [ -z "$netroot" ] && netroot=$root # @deprecated echo "Warning: Argument iscsiroot is deprecated and might be removed in a future" echo "release. See 'man dracut.kernel' for more information." # Accept iscsiroot argument? [ -z "$netroot" ] || [ "$netroot" = "iscsi" ] || \ die "Argument iscsiroot only accepted for empty root= or [net]root=iscsi" # Override root with iscsiroot content? [ -z "$netroot" ] || [ "$netroot" = "iscsi" ] && netroot=iscsi:$iscsiroot fi # iscsi_firmware does not need argument checking if [ -n "$iscsi_firmware" ]; then if [ "$root" != "dhcp" ] && [ "$netroot" != "dhcp" ]; then [ -z "$netroot" ] && netroot=iscsi: fi modprobe -b -q iscsi_boot_sysfs 2>/dev/null modprobe -b -q iscsi_ibft # if no ip= is given, but firmware echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh initqueue --unique --online /sbin/iscsiroot online "iscsi:" "$NEWROOT" initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "iscsi:" "$NEWROOT" initqueue --unique --onetime --settled /sbin/iscsiroot online "iscsi:" "'$NEWROOT'" fi # ISCSI actually supported? if ! [ -e /sys/module/iscsi_tcp ]; then modprobe -b -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi" fi modprobe --all -b -q qla4xxx cxgb3i cxgb4i bnx2i be2iscsi if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then if ! getargbool 1 rd.neednet >/dev/null || ! getarg "ip="; then initqueue --unique --onetime --settled /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'" fi fi if arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) && [ -n "$arg" ] && ! [ -f /run/initiatorname.iscsi ] ; then iscsi_initiator=$arg echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi rm -f /etc/iscsi/initiatorname.iscsi mkdir -p /etc/iscsi ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi if [ -n "$DRACUT_SYSTEMD" ]; then systemctl try-restart iscsid # FIXME: iscsid is not yet ready, when the service is :-/ sleep 1 fi fi # If not given on the cmdline and initiator-name available via iBFT if [ -z $iscsi_initiator ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name) if [ -n "$iscsi_initiator" ]; then echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi rm -f /etc/iscsi/initiatorname.iscsi mkdir -p /etc/iscsi ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi > /tmp/iscsi_set_initiator if [ -n "$DRACUT_SYSTEMD" ]; then systemctl try-restart iscsid # FIXME: iscsid is not yet ready, when the service is :-/ sleep 1 fi fi fi if [ -z "$netroot" ] || ! [ "${netroot%%:*}" = "iscsi" ]; then return 1 fi initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "$netroot" "$NEWROOT" for nroot in $(getargs netroot); do [ "${nroot%%:*}" = "iscsi" ] || continue type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh parse_iscsi_root "$nroot" || return 1 netroot_enc=$(str_replace "$nroot" '/' '\2f') echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh done # Done, all good! rootok=1 # Shut up init error check [ -z "$root" ] && root="iscsi" modules.d/95iscsi/cleanup-iscsi.sh 0000755 00000000130 15053306611 0013016 0 ustar 00 #!/bin/sh [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && killproc iscsiuio modules.d/95iscsi/module-setup.sh 0000755 00000022216 15053306611 0012713 0 ustar 00 #!/bin/bash # called by dracut check() { local _rootdev # If our prerequisites are not met, fail anyways. require_binaries iscsi-iname iscsiadm iscsid || return 1 # If hostonly was requested, fail the check if we are not actually # booting from root. is_iscsi() { local _dev=$1 [[ -L "/sys/dev/block/$_dev" ]] || return cd "$(readlink -f "/sys/dev/block/$_dev")" until [[ -d sys || -d iscsi_session ]]; do cd .. done [[ -d iscsi_session ]] } [[ $hostonly ]] || [[ $mount_needs ]] && { pushd . >/dev/null for_each_host_dev_and_slaves is_iscsi || return 255 popd >/dev/null } return 0 } get_ibft_mod() { local ibft_mac=$1 local iface_mac iface_mod # Return the iSCSI offload module for a given MAC address for iface_desc in $(iscsiadm -m iface | cut -f 2 -d ' '); do iface_mod=${iface_desc%%,*} iface_mac=${iface_desc#*,} iface_mac=${iface_mac%%,*} if [ "$ibft_mac" = "$iface_mac" ] ; then echo $iface_mod return 0 fi done } install_ibft() { # When iBFT / iscsi_boot is detected: # - Use 'ip=ibft' to set up iBFT network interface # Note: bnx2i is using a different MAC address of iSCSI offloading # so the 'ip=ibft' parameter must not be set # - specify firmware booting cmdline parameter for d in /sys/firmware/* ; do if [ -d ${d}/ethernet0 ] ; then read ibft_mac < ${d}/ethernet0/mac ibft_mod=$(get_ibft_mod $ibft_mac) fi if [ -z "$ibft_mod" ] && [ -d ${d}/ethernet1 ] ; then read ibft_mac < ${d}/ethernet1/mac ibft_mod=$(get_ibft_mod $ibft_mac) fi if [ -d ${d}/initiator ] ; then if [ ${d##*/} = "ibft" ] && [ "$ibft_mod" != "bnx2i" ] ; then echo -n "rd.iscsi.ibft=1 " fi echo -n "rd.iscsi.firmware=1" fi done } install_iscsiroot() { local devpath=$1 local scsi_path iscsi_lun session c d conn host flash local iscsi_session iscsi_address iscsi_port iscsi_targetname iscsi_tpgt local bootproto scsi_path=${devpath%%/block*} [ "$scsi_path" = "$devpath" ] && return 1 iscsi_lun=${scsi_path##*:} [ "$iscsi_lun" = "$scsi_path" ] && return 1 session=${devpath%%/target*} [ "$session" = "$devpath" ] && return 1 iscsi_session=${session##*/} [ "$iscsi_session" = "$session" ] && return 1 host=${session%%/session*} [ "$host" = "$session" ] && return 1 iscsi_host=${host##*/} for flash in ${host}/flashnode_sess-* ; do [ -f "$flash" ] || continue [ ! -e "$flash/is_boot_target" ] && continue is_boot=$(cat $flash/is_boot_target) if [ $is_boot -eq 1 ] ; then # qla4xxx flashnode session; skip iBFT discovery iscsi_initiator=$(cat /sys/class/iscsi_host/${iscsi_host}/initiatorname) echo "rd.iscsi.initiator=${iscsi_initiator}" return; fi done for d in ${session}/* ; do case $d in *connection*) c=${d##*/} conn=${d}/iscsi_connection/${c} if [ -d ${conn} ] ; then iscsi_address=$(cat ${conn}/persistent_address) iscsi_port=$(cat ${conn}/persistent_port) fi ;; *session) if [ -d ${d}/${iscsi_session} ] ; then iscsi_initiator=$(cat ${d}/${iscsi_session}/initiatorname) iscsi_targetname=$(cat ${d}/${iscsi_session}/targetname) fi ;; esac done [ -z "$iscsi_address" ] && return local_address=$(ip -o route get to $iscsi_address | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p') ifname=$(ip -o route get to $iscsi_address | sed -n 's/.*dev \([^ ]*\).*/\1/p') # follow ifcfg settings for boot protocol for _path in \ "/etc/sysconfig/network-scripts/ifcfg-$ifname" \ "/etc/sysconfig/network/ifcfg-$ifname" \ ; do [ -r "$_path" ] && bootproto=$(sed -n "s/BOOTPROTO='\?\([[:alpha:]]*6\?\)4\?/\1/p" "$_path") done if [ $bootproto ]; then printf 'ip=%s:%s ' ${ifname} ${bootproto} else printf 'ip=%s:static ' ${ifname} fi if [ -e /sys/class/net/$ifname/address ] ; then ifmac=$(cat /sys/class/net/$ifname/address) printf 'ifname=%s:%s ' ${ifname} ${ifmac} fi if [ -n "$iscsi_address" -a -n "$iscsi_targetname" ] ; then if [ -n "$iscsi_port" -a "$iscsi_port" -eq 3260 ] ; then iscsi_port= fi if [ -n "$iscsi_lun" -a "$iscsi_lun" -eq 0 ] ; then iscsi_lun= fi # In IPv6 case rd.iscsi.initatior= must pass address in [] brackets case "$iscsi_address" in *:*) iscsi_address="[$iscsi_address]" ;; esac # Must be two separate lines, so that "sort | uniq" commands later # can sort out rd.iscsi.initiator= duplicates echo "rd.iscsi.initiator=${iscsi_initiator}" echo "netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}" echo "rd.neednet=1" fi return 0 } install_softiscsi() { [ -d /sys/firmware/ibft ] && return 0 is_softiscsi() { local _dev=$1 local iscsi_dev [[ -L "/sys/dev/block/$_dev" ]] || return iscsi_dev=$(cd -P /sys/dev/block/$_dev; echo $PWD) install_iscsiroot $iscsi_dev } for_each_host_dev_and_slaves_all is_softiscsi || return 255 return 0 } # called by dracut depends() { echo network rootfs-block } # called by dracut installkernel() { local _arch=$(uname -m) local _funcs='iscsi_register_transport' instmods bnx2i qla4xxx cxgb3i cxgb4i be2iscsi qedi hostonly="" instmods iscsi_tcp iscsi_ibft crc32c iscsi_boot_sysfs if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then _s390drivers="=drivers/s390/scsi" fi dracut_instmods -o -s ${_funcs} =drivers/scsi ${_s390drivers:+"$_s390drivers"} } # called by dracut cmdline() { local _iscsiconf=$(install_ibft) { if [ "$_iscsiconf" ] ; then echo ${_iscsiconf} else install_softiscsi fi } | sort | uniq } # called by dracut install() { inst_multiple -o iscsiuio inst_libdir_file 'libgcc_s.so*' inst_multiple umount iscsi-iname iscsiadm iscsid inst_multiple -o \ $systemdsystemunitdir/iscsid.socket \ $systemdsystemunitdir/iscsid.service \ $systemdsystemunitdir/iscsiuio.service \ $systemdsystemunitdir/iscsiuio.socket \ $systemdsystemunitdir/sockets.target.wants/iscsid.socket \ $systemdsystemunitdir/sockets.target.wants/iscsiuio.socket if [[ $hostonly ]]; then inst_dir $(/usr/bin/find /etc/iscsi) else inst_simple /etc/iscsi/iscsid.conf fi # Detect iBFT and perform mandatory steps if [[ $hostonly_cmdline == "yes" ]] ; then local _iscsiconf=$(cmdline) [[ $_iscsiconf ]] && printf "%s\n" "$_iscsiconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf" fi inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh" inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh" inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot" if ! dracut_module_included "systemd"; then inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh" else inst_multiple -o \ $systemdsystemunitdir/iscsi.service \ $systemdsystemunitdir/iscsid.service \ $systemdsystemunitdir/iscsid.socket \ $systemdsystemunitdir/iscsiuio.service \ $systemdsystemunitdir/iscsiuio.socket \ iscsiadm iscsid for i in \ iscsid.socket \ iscsiuio.socket \ ; do systemctl -q --root "$initdir" enable "$i" done for i in \ iscsid.service \ iscsiuio.service \ ; do systemctl -q --root "$initdir" add-wants basic.target "$i" done # Make sure iscsid is started after dracut-cmdline and ready for the initqueue mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.service.d" ( echo "[Unit]" echo "After=dracut-cmdline.service" echo "Before=dracut-initqueue.service" ) > "${initdir}/$systemdsystemunitdir/iscsid.service.d/dracut.conf" # The iscsi deamon does not need to wait for any storage inside initrd mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.socket.d" ( echo "[Unit]" echo "DefaultDependencies=no" echo "Conflicts=shutdown.target" echo "Before=shutdown.target sockets.target" ) > "${initdir}/$systemdsystemunitdir/iscsid.socket.d/dracut.conf" mkdir -p "${initdir}/$systemdsystemunitdir/iscsiuio.socket.d" ( echo "[Unit]" echo "DefaultDependencies=no" echo "Conflicts=shutdown.target" echo "Before=shutdown.target sockets.target" ) > "${initdir}/$systemdsystemunitdir/iscsiuio.socket.d/dracut.conf" fi inst_dir /var/lib/iscsi dracut_need_initqueue } modules.d/95hwdb/module-setup.sh 0000755 00000001057 15053306611 0012525 0 ustar 00 #!/bin/bash # This file is part of dracut. # SPDX-License-Identifier: GPL-2.0-or-later check() { return 255 } # called by dracut install() { local hwdb_bin # systemd-hwdb ships the file in /etc, with /usr/lib as an alternative. # Therefore consider this location as preferred for configuration. hwdb_bin="${udevdir}"/hwdb.bin if [[ ! -r "${hwdb_bin}" ]]; then hwdb_bin="${udevconfdir}"/hwdb.bin fi if [[ $hostonly ]]; then inst_multiple -H "${hwdb_bin}" else inst_multiple "${hwdb_bin}" fi } modules.d/00systemd/module-setup.sh 0000755 00000022232 15053306611 0013251 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $mount_needs ]] && return 1 if require_binaries $systemdutildir/systemd; then SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; }) (( $SYSTEMD_VERSION >= 198 )) && return 0 return 255 fi return 1 } # called by dracut depends() { return 0 } installkernel() { hostonly='' instmods autofs4 ipv6 algif_hash hmac sha256 sg instmods -s efivarfs } # called by dracut install() { local _mods if [[ "$prefix" == /run/* ]]; then dfatal "systemd does not work with a prefix, which contains \"/run\"!!" exit 1 fi inst_multiple -o \ $systemdutildir/system-generators/systemd-debug-generator \ $systemdsystemunitdir/debug-shell.service inst_multiple -o \ $systemdutildir/systemd \ $systemdutildir/systemd-coredump \ $systemdutildir/systemd-cgroups-agent \ $systemdutildir/systemd-shutdown \ $systemdutildir/systemd-reply-password \ $systemdutildir/systemd-fsck \ $systemdutildir/systemd-udevd \ $systemdutildir/systemd-journald \ $systemdutildir/systemd-sysctl \ $systemdutildir/systemd-modules-load \ $systemdutildir/systemd-vconsole-setup \ $systemdutildir/systemd-sysroot-fstab-check \ $systemdutildir/system-generators/systemd-fstab-generator \ $systemdutildir/system-generators/systemd-gpt-auto-generator \ \ $systemdsystemunitdir/cryptsetup.target \ $systemdsystemunitdir/emergency.target \ $systemdsystemunitdir/sysinit.target \ $systemdsystemunitdir/basic.target \ $systemdsystemunitdir/halt.target \ $systemdsystemunitdir/kexec.target \ $systemdsystemunitdir/local-fs.target \ $systemdsystemunitdir/local-fs-pre.target \ $systemdsystemunitdir/remote-fs.target \ $systemdsystemunitdir/remote-fs-pre.target \ $systemdsystemunitdir/multi-user.target \ $systemdsystemunitdir/network.target \ $systemdsystemunitdir/network-pre.target \ $systemdsystemunitdir/network-online.target \ $systemdsystemunitdir/nss-lookup.target \ $systemdsystemunitdir/nss-user-lookup.target \ $systemdsystemunitdir/poweroff.target \ $systemdsystemunitdir/reboot.target \ $systemdsystemunitdir/rescue.target \ $systemdsystemunitdir/rpcbind.target \ $systemdsystemunitdir/shutdown.target \ $systemdsystemunitdir/final.target \ $systemdsystemunitdir/sigpwr.target \ $systemdsystemunitdir/sockets.target \ $systemdsystemunitdir/swap.target \ $systemdsystemunitdir/timers.target \ $systemdsystemunitdir/paths.target \ $systemdsystemunitdir/umount.target \ \ $systemdsystemunitdir/sys-kernel-config.mount \ \ $systemdsystemunitdir/kmod-static-nodes.service \ $systemdsystemunitdir/systemd-tmpfiles-setup.service \ $systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \ $systemdsystemunitdir/systemd-ask-password-console.path \ $systemdsystemunitdir/systemd-udevd-control.socket \ $systemdsystemunitdir/systemd-udevd-kernel.socket \ $systemdsystemunitdir/systemd-ask-password-plymouth.path \ $systemdsystemunitdir/systemd-journald.socket \ $systemdsystemunitdir/systemd-journald-audit.socket \ $systemdsystemunitdir/systemd-ask-password-console.service \ $systemdsystemunitdir/systemd-modules-load.service \ $systemdsystemunitdir/systemd-halt.service \ $systemdsystemunitdir/systemd-poweroff.service \ $systemdsystemunitdir/systemd-reboot.service \ $systemdsystemunitdir/systemd-kexec.service \ $systemdsystemunitdir/systemd-fsck@.service \ $systemdsystemunitdir/systemd-udevd.service \ $systemdsystemunitdir/systemd-udev-trigger.service \ $systemdsystemunitdir/systemd-udev-settle.service \ $systemdsystemunitdir/systemd-ask-password-plymouth.service \ $systemdsystemunitdir/systemd-journald.service \ $systemdsystemunitdir/systemd-vconsole-setup.service \ $systemdsystemunitdir/systemd-random-seed-load.service \ $systemdsystemunitdir/systemd-random-seed.service \ $systemdsystemunitdir/systemd-sysctl.service \ \ $systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \ $systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \ $systemdsystemunitdir/sysinit.target.wants/systemd-journald.service \ $systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \ $systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \ $systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \ $systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \ $systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \ $systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \ $systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \ $systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \ $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup.service \ $systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \ $systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \ \ $systemdsystemunitdir/ctrl-alt-del.target \ $systemdsystemunitdir/reboot.target \ $systemdsystemunitdir/systemd-reboot.service \ $systemdsystemunitdir/syslog.socket \ \ $systemdsystemunitdir/slices.target \ $systemdsystemunitdir/system.slice \ $systemdsystemunitdir/-.slice \ \ $tmpfilesdir/systemd.conf \ \ journalctl systemctl \ echo swapoff \ kmod insmod rmmod modprobe modinfo depmod lsmod \ mount umount reboot poweroff \ systemd-run systemd-escape \ systemd-cgls systemd-tmpfiles \ /etc/udev/udev.hwdb \ ${NULL} inst_multiple -o \ /usr/lib/modules-load.d/*.conf \ /usr/lib/sysctl.d/*.conf modules_load_get() { local _line i for i in "$1"/*.conf; do [[ -f $i ]] || continue while read _line || [ -n "$_line" ]; do case $_line in \#*) ;; \;*) ;; *) echo $_line esac done < "$i" done } _mods=$(modules_load_get /usr/lib/modules-load.d) [[ $_mods ]] && hostonly='' instmods $_mods if [[ $hostonly ]]; then inst_multiple -H -o \ /etc/systemd/journald.conf \ /etc/systemd/journald.conf.d/*.conf \ /etc/systemd/system.conf \ /etc/systemd/system.conf.d/*.conf \ /etc/hostname \ /etc/machine-id \ /etc/machine-info \ /etc/vconsole.conf \ /etc/locale.conf \ /etc/modules-load.d/*.conf \ /etc/sysctl.d/*.conf \ /etc/sysctl.conf \ /etc/udev/udev.conf \ ${NULL} _mods=$(modules_load_get /etc/modules-load.d) [[ $_mods ]] && hostonly='' instmods $_mods fi if ! [[ -e "$initdir/etc/machine-id" ]]; then > "$initdir/etc/machine-id" fi # install adm user/group for journald inst_multiple nologin grep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" grep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" grep '^systemd-journal:' /etc/group >> "$initdir/etc/group" grep '^wheel:' /etc/group >> "$initdir/etc/group" grep '^adm:' /etc/group >> "$initdir/etc/group" grep '^utmp:' /etc/group >> "$initdir/etc/group" grep '^root:' /etc/group >> "$initdir/etc/group" # we don't use systemd-networkd, but the user is in systemd.conf tmpfiles snippet grep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" grep '^systemd-network:' /etc/group >> "$initdir/etc/group" ln_r $systemdutildir/systemd "/init" ln_r $systemdutildir/systemd "/sbin/init" inst_binary true ln_r $(find_binary true) "/usr/bin/loginctl" ln_r $(find_binary true) "/bin/loginctl" inst_rules \ 70-uaccess.rules \ 71-seat.rules \ 73-seat-late.rules \ 90-vconsole.rules \ 99-systemd.rules \ ${NULL} for i in \ emergency.target \ rescue.target \ systemd-ask-password-console.service \ systemd-ask-password-plymouth.service \ ; do systemctl -q --root "$initdir" add-wants "$i" systemd-vconsole-setup.service 2>/dev/null done mkdir -p "$initdir/etc/systemd" # We must use a volatile journal, and we don't want rate-limiting { echo "[Journal]" echo "Storage=volatile" echo "RateLimitInterval=0" echo "RateLimitBurst=0" } >> "$initdir/etc/systemd/journald.conf" systemctl -q --root "$initdir" set-default multi-user.target } modules.d/97biosdevname/module-setup.sh 0000755 00000000437 15053306611 0014100 0 ustar 00 #!/bin/bash # called by dracut check() { [[ "$mount_needs" ]] && return 1 require_binaries biosdevname || return 1 return 0 } # called by dracut depends() { return 0 } # called by dracut install() { inst_multiple biosdevname inst_rules 71-biosdevname.rules } modules.d/97biosdevname/parse-biosdevname.sh 0000755 00000000465 15053306611 0015062 0 ustar 00 #!/bin/sh if ! getargbool 1 biosdevname; then info "biosdevname=0: removing biosdevname network renaming" udevproperty UDEV_BIOSDEVNAME= rm -f -- /etc/udev/rules.d/71-biosdevname.rules else info "biosdevname=1: activating biosdevname network renaming" udevproperty UDEV_BIOSDEVNAME=1 fi modules.d/99kdumpbase/kdump-capture.service 0000644 00000001661 15053306611 0014742 0 ustar 00 # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. [Unit] Description=Kdump Vmcore Save Service After=initrd.target initrd-parse-etc.service sysroot.mount After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service dracut-pre-pivot.service Before=initrd-cleanup.service ConditionPathExists=/etc/initrd-release OnFailure=emergency.target OnFailureJobMode=isolate [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=/bin/kdump.sh StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/99kdumpbase/monitor_dd_progress 0000644 00000000742 15053306611 0014603 0 ustar 00 #!/bin/sh SRC_FILE_MB=$1 while true do DD_PID=`pidof dd` if [ -n "$DD_PID" ]; then break fi done while true do sleep 5 if [ ! -d /proc/$DD_PID ]; then break fi kill -s USR1 $DD_PID CURRENT_SIZE=`tail -n 1 /tmp/dd_progress_file | sed "s/[^0-9].*//g"` [ -n "$CURRENT_SIZE" ] && { CURRENT_MB=$(($CURRENT_SIZE / 1048576)) echo -e "Copied $CURRENT_MB MB / $SRC_FILE_MB MB\r" } done rm -f /tmp/dd_progress_file modules.d/99kdumpbase/kdump-error-handler.sh 0000755 00000000221 15053306611 0015007 0 ustar 00 #!/bin/sh . /lib/kdump-lib-initramfs.sh set -o pipefail export PATH=$PATH:$KDUMP_SCRIPT_DIR get_kdump_confs do_failure_action do_final_action modules.d/99kdumpbase/kdump.sh 0000755 00000017603 15053306611 0012261 0 ustar 00 #!/bin/sh # continue here only if we have to save dump. if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ] && [ ! -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then exit 0 fi . /lib/dracut-lib.sh . /lib/kdump-lib-initramfs.sh set -o pipefail DUMP_RETVAL=0 export PATH=$PATH:$KDUMP_SCRIPT_DIR do_dump() { local _ret eval $DUMP_INSTRUCTION _ret=$? if [ $_ret -ne 0 ]; then derror "saving vmcore failed" fi return $_ret } do_kdump_pre() { local _ret if [ -n "$KDUMP_PRE" ]; then "$KDUMP_PRE" _ret=$? if [ $_ret -ne 0 ]; then derror "$KDUMP_PRE exited with $_ret status" return $_ret fi fi # if any script fails, it just raises warning and continues if [ -d /etc/kdump/pre.d ]; then for file in /etc/kdump/pre.d/*; do "$file" _ret=$? if [ $_ret -ne 0 ]; then derror "$file exited with $_ret status" fi done fi return 0 } do_kdump_post() { local _ret if [ -d /etc/kdump/post.d ]; then for file in /etc/kdump/post.d/*; do "$file" "$1" _ret=$? if [ $_ret -ne 0 ]; then derror "$file exited with $_ret status" fi done fi if [ -n "$KDUMP_POST" ]; then "$KDUMP_POST" "$1" _ret=$? if [ $_ret -ne 0 ]; then derror "$KDUMP_POST exited with $_ret status" fi fi } add_dump_code() { DUMP_INSTRUCTION=$1 } dump_raw() { local _raw=$1 [ -b "$_raw" ] || return 1 dinfo "saving to raw disk $_raw" if ! $(echo -n $CORE_COLLECTOR|grep -q makedumpfile); then _src_size=`ls -l /proc/vmcore | cut -d' ' -f5` _src_size_mb=$(($_src_size / 1048576)) monitor_dd_progress $_src_size_mb & fi dinfo "saving vmcore" $CORE_COLLECTOR /proc/vmcore | dd of=$_raw bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1 sync dinfo "saving vmcore complete" return 0 } dump_ssh() { local _ret=0 local _exitcode=0 _exitcode2=0 local _opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes" local _dir="$KDUMP_PATH/$HOST_IP-$DATEDIR" local _host=$2 local _vmcore="vmcore" local _ipv6_addr="" _username="" dinfo "saving to $_host:$_dir" cat /var/lib/random-seed > /dev/urandom ssh -q $_opt $_host mkdir -p $_dir || return 1 save_vmcore_dmesg_ssh ${DMESG_COLLECTOR} ${_dir} "${_opt}" $_host save_opalcore_ssh ${_dir} "${_opt}" $_host dinfo "saving vmcore" if is_ipv6_address "$_host"; then _username=${_host%@*} _ipv6_addr="[${_host#*@}]" fi if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then if [ -n "$_username" ] && [ -n "$_ipv6_addr" ]; then scp -q $_opt /proc/vmcore "$_username@$_ipv6_addr:$_dir/vmcore-incomplete" else scp -q $_opt /proc/vmcore "$_host:$_dir/vmcore-incomplete" fi _exitcode=$? else $CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "umask 0077 && dd bs=512 of=$_dir/vmcore-incomplete" _exitcode=$? _vmcore="vmcore.flat" fi if [ $_exitcode -eq 0 ]; then ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/$_vmcore" _exitcode2=$? if [ $_exitcode2 -ne 0 ]; then derror "moving vmcore failed, _exitcode:$_exitcode2" else dinfo "saving vmcore complete" fi else derror "saving vmcore failed, _exitcode:$_exitcode" fi dinfo "saving the $KDUMP_LOG_FILE to $_host:$_dir/" save_log if [ -n "$_username" ] && [ -n "$_ipv6_addr" ]; then scp -q $_opt $KDUMP_LOG_FILE "$_username@$_ipv6_addr:$_dir/" else scp -q $_opt $KDUMP_LOG_FILE "$_host:$_dir/" fi _ret=$? if [ $_ret -ne 0 ]; then derror "saving log file failed, _exitcode:$_ret" fi if [ $_exitcode -ne 0 ] || [ $_exitcode2 -ne 0 ];then return 1 fi return 0 } save_opalcore_ssh() { local _path=$1 local _opts="$2" local _location=$3 local _user_name="" _ipv6addr="" ddebug "_path=$_path _opts=$_opts _location=$_location" if [ ! -f $OPALCORE ]; then # Check if we are on an old kernel that uses a different path if [ -f /sys/firmware/opal/core ]; then OPALCORE="/sys/firmware/opal/core" else return 0 fi fi if is_ipv6_address "$_host"; then _user_name=${_location%@*} _ipv6addr="[${_location#*@}]" fi dinfo "saving opalcore:$OPALCORE to $_location:$_path" if [ -n "$_user_name" ] && [ -n "$_ipv6addr" ]; then scp $_opts $OPALCORE $_user_name@$_ipv6addr:$_path/opalcore-incomplete else scp $_opts $OPALCORE $_location:$_path/opalcore-incomplete fi if [ $? -ne 0 ]; then derror "saving opalcore failed" return 1 fi ssh $_opts $_location mv $_path/opalcore-incomplete $_path/opalcore dinfo "saving opalcore complete" return 0 } save_vmcore_dmesg_ssh() { local _dmesg_collector=$1 local _path=$2 local _opts="$3" local _location=$4 dinfo "saving vmcore-dmesg.txt to $_location:$_path" $_dmesg_collector /proc/vmcore | ssh $_opts $_location "umask 0077 && dd of=$_path/vmcore-dmesg-incomplete.txt" _exitcode=$? if [ $_exitcode -eq 0 ]; then ssh -q $_opts $_location mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt dinfo "saving vmcore-dmesg.txt complete" else derror "saving vmcore-dmesg.txt failed" fi } get_host_ip() { local _host if is_nfs_dump_target || is_ssh_dump_target then kdumpnic=$(getarg kdumpnic=) [ -z "$kdumpnic" ] && derror "failed to get kdumpnic!" && return 1 _host=`ip addr show dev $kdumpnic|grep '[ ]*inet'` [ $? -ne 0 ] && derror "wrong kdumpnic: $kdumpnic" && return 1 _host=`echo $_host | head -n 1 | cut -d' ' -f2` _host="${_host%%/*}" [ -z "$_host" ] && derror "wrong kdumpnic: $kdumpnic" && return 1 HOST_IP=$_host fi return 0 } read_kdump_conf() { if [ ! -f "$KDUMP_CONF" ]; then derror "$KDUMP_CONF not found" return fi get_kdump_confs # rescan for add code for dump target while read config_opt config_val; do # remove inline comments after the end of a directive. case "$config_opt" in dracut_args) config_val=$(get_dracut_args_target "$config_val") if [ -n "$config_val" ]; then config_val=$(get_mntpoint_from_target "$config_val") add_dump_code "dump_fs $config_val" fi ;; ext[234]|xfs|btrfs|minix|nfs) config_val=$(get_mntpoint_from_target "$config_val") add_dump_code "dump_fs $config_val" ;; raw) add_dump_code "dump_raw $config_val" ;; ssh) add_dump_code "dump_ssh $SSH_KEY_LOCATION $config_val" ;; esac done <<< "$(read_strip_comments $KDUMP_CONF)" } fence_kdump_notify() { if [ -n "$FENCE_KDUMP_NODES" ]; then $FENCE_KDUMP_SEND $FENCE_KDUMP_ARGS $FENCE_KDUMP_NODES & fi } read_kdump_conf fence_kdump_notify get_host_ip if [ $? -ne 0 ]; then derror "get_host_ip exited with non-zero status!" exit 1 fi if [ -z "$DUMP_INSTRUCTION" ]; then add_dump_code "dump_fs $NEWROOT" fi do_kdump_pre if [ $? -ne 0 ]; then derror "kdump_pre script exited with non-zero status!" do_final_action # During systemd service to reboot the machine, stop this shell script running exit 1 fi make_trace_mem "kdump saving vmcore" '1:shortmem' '2+:mem' '3+:slab' do_dump DUMP_RETVAL=$? do_kdump_post $DUMP_RETVAL if [ $? -ne 0 ]; then derror "kdump_post script exited with non-zero status!" fi if [ $DUMP_RETVAL -ne 0 ]; then exit 1 fi do_final_action modules.d/99kdumpbase/kdump-emergency.service 0000644 00000001611 15053306611 0015250 0 ustar 00 # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # This service will be placed in kdump initramfs and replace both the systemd # emergency service and dracut emergency shell. IOW, any emergency will be # kick this service and in turn isolating to kdump error handler. [Unit] Description=Kdump Emergency DefaultDependencies=no IgnoreOnIsolate=yes [Service] ExecStart=/usr/bin/systemctl --no-block isolate kdump-error-handler.service Type=oneshot StandardInput=tty-force StandardOutput=inherit StandardError=inherit KillMode=process IgnoreSIGPIPE=no # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/99kdumpbase/kdump-emergency.target 0000644 00000000703 15053306611 0015077 0 ustar 00 # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. [Unit] Description=Emergency Mode Documentation=man:systemd.special(7) Requires=emergency.service After=emergency.service AllowIsolate=yes IgnoreOnIsolate=yes modules.d/99kdumpbase/module-setup.sh 0000755 00000105664 15053306611 0013571 0 ustar 00 #!/bin/bash _save_kdump_netifs() { local _name if [[ -n $2 ]]; then _name=$2 else _name=$1 fi unique_netifs[$1]=$_name } _get_kdump_netifs() { echo -n "${!unique_netifs[@]}" } kdump_module_init() { if ! [[ -d "${initdir}/tmp" ]]; then mkdir -p "${initdir}/tmp" fi . /lib/kdump/kdump-lib.sh } check() { [[ $debug ]] && set -x #kdumpctl sets this explicitly if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ] then return 1 fi return 0 } depends() { local _dep="base shutdown" kdump_module_init add_opt_module() { [[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1" } if is_squash_available; then add_opt_module squash else dwarning "Required modules to build a squashed kdump image is missing!" fi add_opt_module watchdog-modules if is_wdt_active; then add_opt_module watchdog fi if is_ssh_dump_target; then _dep="$_dep ssh-client" fi if is_lvm2_thinp_dump_target; then if grep -q lvmthinpool-monitor <<< $(dracut --list-modules); then add_opt_module lvmthinpool-monitor else dwarning "Required lvmthinpool-monitor modules is missing! Please upgrade dracut >= 057." fi fi if [ "$(uname -m)" = "s390x" ]; then _dep="$_dep znet" fi if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then add_opt_module drm fi if is_generic_fence_kdump || is_pcs_fence_kdump; then _dep="$_dep network" fi echo $_dep } kdump_is_bridge() { [ -d /sys/class/net/"$1"/bridge ] } kdump_is_bond() { [ -d /sys/class/net/"$1"/bonding ] } kdump_is_team() { [ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null } kdump_is_vlan() { [ -f /proc/net/vlan/"$1" ] } # $1: netdev name source_ifcfg_file() { local ifcfg_file ifcfg_file=$(get_ifcfg_filename $1) if [ -f "${ifcfg_file}" ]; then . ${ifcfg_file} else dwarning "The ifcfg file of $1 is not found!" fi } add_dns_netdev() { local _server _route _server=$1 _route=`/sbin/ip -o route get to $_server 2>&1` [ $? != 0 ] && echo "DNS server $_server unreachable" _netdev=$(get_ip_route_field "$_route" "dev") _save_kdump_netifs "$_netdev" "$(kdump_setup_ifname $_netdev)" } # $1: netdev name kdump_setup_dns() { local _nameserver _dns local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf source_ifcfg_file $1 [ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile" && add_dns_netdev "$DNS1" [ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile" && add_dns_netdev "$DNS2" while read content; do _nameserver=$(echo $content | grep ^nameserver) [ -z "$_nameserver" ] && continue _dns=$(echo $_nameserver | cut -d' ' -f2) [ -z "$_dns" ] && continue if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then echo "nameserver=$_dns" >> "$_dnsfile" add_dns_netdev "$_dns" fi done < "/etc/resolv.conf" } # $1: repeat times # $2: string to be repeated # $3: separator repeatedly_join_str() { local _count="$1" local _str="$2" local _separator="$3" local i _res if [[ "$_count" -le 0 ]]; then echo -n "" return fi i=0 _res="$_str" ((_count--)) while [[ "$i" -lt "$_count" ]]; do ((i++)) _res="${_res}${_separator}${_str}" done echo -n "$_res" } # $1: prefix # $2: ipv6_flag="-6" indicates it's IPv6 # Given a prefix, calculate the netmask (equivalent of "ipcalc -m") # by concatenating three parts, # 1) the groups with all bits set 1 # 2) a group with partial bits set to 0 # 3) the groups with all bits set to 0 cal_netmask_by_prefix() { local _prefix="$1" local _ipv6_flag="$2" _ipv6 local _bits_per_octet=8 local _count _res _octets_per_group _octets_total _seperator _total_groups local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits if [[ "$_ipv6_flag" == "-6" ]]; then _ipv6=1 else _ipv6=0 fi if [[ "$_prefix" -lt 0 || "$_prefix" -gt 128 ]] || \ ( ((!_ipv6)) && [[ "$_prefix" -gt 32 ]] ); then derror "Bad prefix:$_prefix for calculating netmask" exit 1 fi if ((_ipv6)); then _octets_per_group=2 _octets_total=16 _seperator=":" else _octets_per_group=1 _octets_total=4 _seperator="." fi _total_groups=$((_octets_total/_octets_per_group)) _bits_per_group=$((_octets_per_group * _bits_per_octet)) _max_group_value=$(((1 << _bits_per_group) - 1)) if ((_ipv6)); then _max_group_value_repr=$(printf "%x" $_max_group_value) else _max_group_value_repr="$_max_group_value" fi _count=$((_prefix/_octets_per_group/_bits_per_octet)) _first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator") _res="$_first_part" _tmp=$((_octets_total*_bits_per_octet-_prefix)) _zero_bits=$(expr $_tmp % $_bits_per_group) if [[ "$_zero_bits" -ne 0 ]]; then _second_part=$((_max_group_value >> _zero_bits << _zero_bits)) if ((_ipv6)); then _second_part=$(printf "%x" $_second_part) fi ((_count++)) if [[ -z "$_first_part" ]]; then _res="$_second_part" else _res="${_first_part}${_seperator}${_second_part}" fi fi _count=$((_total_groups-_count)) if [[ "$_count" -eq 0 ]]; then echo -n "$_res" return fi if ((_ipv6)) && [[ "$_count" -gt 1 ]] ; then # use condensed notion for IPv6 _third_part=":" else _third_part=$(repeatedly_join_str "$_count" "0" "$_seperator") fi if [[ -z "$_res" ]] && ((!_ipv6)) ; then echo -n "${_third_part}" else echo -n "${_res}${_seperator}${_third_part}" fi } #$1: netdev name #$2: srcaddr #if it use static ip echo it, or echo null kdump_static_ip() { local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag local _netmask _gateway _ipaddr _target _nexthop _prefix _ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}") if is_ipv6_address $_srcaddr; then _ipv6_flag="-6" fi if [ -n "$_ipaddr" ]; then _gateway=$(ip $_ipv6_flag route list dev $_netdev | \ awk '/^default /{print $3}' | head -n 1) if [ "x" != "x"$_ipv6_flag ]; then # _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/" _netmask=${_ipaddr#*\/} _srcaddr="[$_srcaddr]" _gateway="[$_gateway]" else _prefix=$(cut -d'/' -f2 <<< "$_ipaddr") _netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag") if [[ "$?" -ne 0 ]]; then derror "Failed to calculate netmask for $_ipaddr" exit 1 fi fi echo -n "${_srcaddr}::${_gateway}:${_netmask}::" fi /sbin/ip $_ipv6_flag route show | grep -v default | grep ".*via.* $_netdev " |\ while read _route; do _target=`echo $_route | cut -d ' ' -f1` _nexthop=`echo $_route | cut -d ' ' -f3` if [ "x" != "x"$_ipv6_flag ]; then _target="[$_target]" _nexthop="[$_nexthop]" fi echo "rd.route=$_target:$_nexthop:$kdumpnic" done >> ${initdir}/etc/cmdline.d/45route-static.conf } kdump_get_mac_addr() { cat /sys/class/net/$1/address } #Bonding or team master modifies the mac address #of its slaves, we should use perm address kdump_get_perm_addr() { local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //') if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ] then derror "Can't get the permanent address of $1" else echo "$addr" fi } # Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0 # Because kernel assigned names are not persistent between 1st and 2nd # kernel. We could probably end up with eth0 being eth1, eth0 being # eth1, and naming conflict happens. kdump_setup_ifname() { local _ifname # If ifname already has 'kdump-' prefix, we must be switching from # fadump to kdump. Skip prefixing 'kdump-' in this case as adding # another prefix may truncate the ifname. Since an ifname with # 'kdump-' is already persistent, this should be fine. if [[ $1 =~ ^eth.* ]] && [[ ! $1 =~ ^kdump-* ]]; then _ifname="kdump-$1" else _ifname="$1" fi echo "$_ifname" } kdump_install_nm_netif_allowlist() { local _netif _except_netif _netif_allowlist _netif_allowlist_nm_conf for _netif in $1; do _per_mac=$(kdump_get_perm_addr "$_netif") if [[ "$_per_mac" != 'not set' ]]; then _except_netif="mac:$_per_mac" else _except_netif="interface-name:${unique_netifs[${_netif}]}" fi _netif_allowlist="${_netif_allowlist}except:${_except_netif};" done _netif_allowlist_nm_conf=${initdir}/tmp/netif_allowlist_nm_conf cat << EOF > "$_netif_allowlist_nm_conf" [device-others] match-device=${_netif_allowlist} managed=false EOF inst "$_netif_allowlist_nm_conf" "/etc/NetworkManager/conf.d/10-kdump-netif_allowlist.conf" rm -f "$_netif_allowlist_nm_conf" } _get_nic_driver() { ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p" } _get_hpyerv_physical_driver() { local _physical_nic _physical_nic=$(find /sys/class/net/"$1"/ -name 'lower_*' | sed -En "s/\/.*lower_(.*)/\1/p") [[ -n $_physical_nic ]] || return _get_nic_driver "$_physical_nic" } kdump_install_nic_driver() { local _netif _driver _drivers _drivers=() for _netif in $1; do [[ $_netif == lo ]] && continue _driver=$(_get_nic_driver "$_netif") if [[ -z $_driver ]]; then derror "Failed to get the driver of $_netif" exit 1 fi if [[ $_driver == "802.1Q VLAN Support" ]]; then # ethtool somehow doesn't return the driver name for a VLAN NIC _driver=8021q elif [[ $_driver == "team" ]]; then # install the team mode drivers like team_mode_roundrobin.ko as well _driver='=drivers/net/team' elif [[ $_driver == "hv_netvsc" ]]; then # A Hyper-V VM may have accelerated networking # https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview # Install the driver of physical NIC as well _drivers+=("$(_get_hpyerv_physical_driver "$_netif")") fi _drivers+=("$_driver") done [[ -n ${_drivers[*]} ]] || return instmods "${_drivers[@]}" } kdump_setup_bridge() { local _netdev=$1 local _brif _dev _mac _kdumpdev for _dev in `ls /sys/class/net/$_netdev/brif/`; do _kdumpdev="" if kdump_is_bond "$_dev"; then kdump_setup_bond "$_dev" elif kdump_is_team "$_dev"; then kdump_setup_team "$_dev" elif kdump_is_vlan "$_dev"; then kdump_setup_vlan "$_dev" else _mac=$(kdump_get_mac_addr $_dev) _kdumpdev=$(kdump_setup_ifname $_dev) echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf fi _save_kdump_netifs "$_dev" "$_kdumpdev" [[ -z $_kdumpdev ]] && _kdumpdev=$_dev _brif+="$_kdumpdev," done echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf } kdump_setup_bond() { local _netdev=$1 local _dev _mac _slaves _kdumpdev for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do _mac=$(kdump_get_perm_addr $_dev) _kdumpdev=$(kdump_setup_ifname $_dev) _save_kdump_netifs "$_dev" "$_kdumpdev" echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf _slaves+="$_kdumpdev," done echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf # Get bond options specified in ifcfg source_ifcfg_file $_netdev bondoptions=":$(echo $BONDING_OPTS | xargs echo | tr " " ",")" echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf } kdump_setup_team() { local _netdev=$1 local _dev _mac _slaves _kdumpdev for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do _mac=$(kdump_get_perm_addr $_dev) _kdumpdev=$(kdump_setup_ifname $_dev) _save_kdump_netifs "$_dev" "$_kdumpdev" echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf _slaves+="$_kdumpdev," done echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf #Buggy version teamdctl outputs to stderr! #Try to use the latest version of teamd. teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf if [ $? -ne 0 ] then derror "teamdctl failed." exit 1 fi inst_dir /etc/teamd inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf" rm -f ${initdir}/tmp/$$-$_netdev.conf } kdump_setup_vlan() { local _netdev=$1 local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")" local _netmac="$(kdump_get_mac_addr $_phydev)" local _kdumpdev #Just support vlan over bond and team if kdump_is_bridge "$_phydev"; then derror "Vlan over bridge is not supported!" exit 1 elif kdump_is_bond "$_phydev"; then kdump_setup_bond "$_phydev" echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf else _kdumpdev="$(kdump_setup_ifname $_phydev)" echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf fi _save_kdump_netifs "$_phydev" "$_kdumpdev" } # find online znet device # return ifname (_netdev) # code reaped from the list_configured function of # https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf find_online_znet_device() { local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices" local NETWORK_DEVICES d ifname ONLINE [ ! -d "$CCWGROUPBUS_DEVICEDIR" ] && return NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR) for d in $NETWORK_DEVICES do [ ! -f "$d/online" ] && continue read ONLINE < $d/online if [ $ONLINE -ne 1 ]; then continue fi # determine interface name, if there (only for qeth and if # device is online) if [ -f $d/if_name ] then read ifname < $d/if_name elif [ -d $d/net ] then ifname=$(ls $d/net/) fi [ -n "$ifname" ] && break done echo -n "$ifname" } # setup s390 znet cmdline # $1: netdev name kdump_setup_znet() { local _options="" local _netdev=$1 source_ifcfg_file $_netdev [[ -z "$NETTYPE" ]] && return [[ -z "$SUBCHANNELS" ]] && return for i in $OPTIONS; do _options=${_options},$i done echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$(kdump_setup_ifname $_netdev):${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf } _get_nic_driver() { ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p" } _rename_hypver_netdev() { local _udev_rule_dir _udev_rule_dir=${initdir}/etc/udev/rules.d mkdir -p "$_udev_rule_dir" printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="hv_netvsc", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$2" "$1" > "${_udev_rule_dir}/80-hv_netvsc-ifname.rules" } # Setup dracut to bringup a given network interface kdump_setup_netdev() { local _netdev=$1 _srcaddr=$2 local _static _proto _ip_conf _ip_opts _ifname_opts kdumpnic local _netmac=$(kdump_get_mac_addr $_netdev) local _znet_netdev kdumpnic=$(kdump_setup_ifname $_netdev) _znet_netdev=$(find_online_znet_device) if [[ -n "$_znet_netdev" ]]; then $(kdump_setup_znet "$_znet_netdev") if [[ $? != 0 ]]; then derror "Failed to set up znet" exit 1 fi fi _static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic) if [ -n "$_static" ]; then _proto=none elif is_ipv6_address $_srcaddr; then _proto=auto6 else _proto=dhcp fi _ip_conf="${initdir}/etc/cmdline.d/40ip.conf" _ip_opts=" ip=${_static}$kdumpnic:${_proto}" # dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same. # so we have to avoid adding duplicates # We should also check /proc/cmdline for existing ip=xx arg. # For example, iscsi boot will specify ip=xxx arg in cmdline. if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\ ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then echo "$_ip_opts" >> $_ip_conf fi if kdump_is_bridge "$_netdev"; then kdump_setup_bridge "$_netdev" elif kdump_is_bond "$_netdev"; then kdump_setup_bond "$_netdev" elif kdump_is_team "$_netdev"; then kdump_setup_team "$_netdev" elif kdump_is_vlan "$_netdev"; then kdump_setup_vlan "$_netdev" else if [[ $(_get_nic_driver "$1") != hv_netvsc ]]; then _ifname_opts=" ifname=$kdumpnic:$_netmac" echo "$_ifname_opts" >> $_ip_conf else _rename_hypver_netdev "$kdumpnic" "$_netmac" fi fi _save_kdump_netifs "$_netdev" "$_kdumpdev" kdump_setup_dns "$_netdev" if [ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]; then # network-manager module needs this parameter echo "rd.neednet" >> ${initdir}/etc/cmdline.d/50neednet.conf fi } get_ip_route_field() { if `echo $1 | grep -q $2`; then echo ${1##*$2} | cut -d ' ' -f1 fi } #Function:kdump_install_net #$1: config values of net line in kdump.conf #$2: srcaddr of network device kdump_install_net() { local _server _netdev _srcaddr _route _serv_tmp local config_val="$1" _server=$(get_remote_host $config_val) if is_hostname $_server; then _serv_tmp=`getent ahosts $_server | grep -v : | head -n 1` if [ -z "$_serv_tmp" ]; then _serv_tmp=`getent ahosts $_server | head -n 1` fi _server=`echo $_serv_tmp | cut -d' ' -f1` fi _route=`/sbin/ip -o route get to $_server 2>&1` [ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1 #the field in the ip output changes if we go to another subnet _srcaddr=$(get_ip_route_field "$_route" "src") _netdev=$(get_ip_route_field "$_route" "dev") kdump_setup_netdev "${_netdev}" "${_srcaddr}" #save netdev used for kdump as cmdline # Whoever calling kdump_install_net() is setting up the default gateway, # ie. bootdev/kdumpnic. So don't override the setting if calling # kdump_install_net() for another time. For example, after setting eth0 as # the default gate way for network dump, eth1 in the fence kdump path will # call kdump_install_net again and we don't want eth1 to be the default # gateway. if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] && [ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf fi } # install etc/kdump/pre.d and /etc/kdump/post.d kdump_install_pre_post_conf() { if [ -d /etc/kdump/pre.d ]; then for file in /etc/kdump/pre.d/*; do if [ -x "$file" ]; then dracut_install $file elif [ $file != "/etc/kdump/pre.d/*" ]; then echo "$file is not executable" fi done fi if [ -d /etc/kdump/post.d ]; then for file in /etc/kdump/post.d/*; do if [ -x "$file" ]; then dracut_install $file elif [ $file != "/etc/kdump/post.d/*" ]; then echo "$file is not executable" fi done fi } default_dump_target_install_conf() { local _target _fstype local _mntpoint _save_path is_user_configured_dump_target && return _save_path=$(get_bind_mount_source $(get_save_path)) _target=$(get_target_from_path $_save_path) _mntpoint=$(get_mntpoint_from_target $_target) _fstype=$(get_fs_type_from_target $_target) if is_fs_type_nfs $_fstype; then kdump_install_net "$_target" _fstype="nfs" else _target=$(kdump_get_persistent_dev $_target) fi echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf # don't touch the path under root mount if [ "$_mntpoint" != "/" ]; then _save_path=${_save_path##"$_mntpoint"} fi #erase the old path line, then insert the parsed path sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf } #install kdump.conf and what user specifies in kdump.conf kdump_install_conf() { local _opt _val _pdev sed -ne '/^#/!p' /etc/kdump.conf > ${initdir}/tmp/$$-kdump.conf while read _opt _val; do # remove inline comments after the end of a directive. case "$_opt" in raw) _pdev=$(persistent_policy="by-id" kdump_get_persistent_dev $_val) sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf ;; ext[234]|xfs|btrfs|minix) _pdev=$(kdump_get_persistent_dev $_val) sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf ;; ssh|nfs) kdump_install_net "$_val" ;; dracut_args) if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then kdump_install_net "$(get_dracut_args_target "$_val")" fi ;; kdump_pre|kdump_post|extra_bins) dracut_install $_val ;; core_collector) dracut_install "${_val%%[[:blank:]]*}" ;; esac done <<< "$(read_strip_comments /etc/kdump.conf)" kdump_install_pre_post_conf default_dump_target_install_conf kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf" inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf" rm -f ${initdir}/tmp/$$-kdump.conf } # Default sysctl parameters should suffice for kdump kernel. # Remove custom configurations sysctl.conf & sysctl.d/* remove_sysctl_conf() { # As custom configurations like vm.min_free_kbytes can lead # to OOM issues in kdump kernel, avoid them rm -f "${initdir}/etc/sysctl.conf" rm -rf "${initdir}/etc/sysctl.d" rm -rf "${initdir}/run/sysctl.d" rm -rf "${initdir}/usr/lib/sysctl.d" } kdump_iscsi_get_rec_val() { local result # The open-iscsi 742 release changed to using flat files in # /var/lib/iscsi. result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ") result=${result##* = } echo $result } kdump_get_iscsi_initiator() { local _initiator local initiator_conf="/etc/iscsi/initiatorname.iscsi" [ -f "$initiator_conf" ] || return 1 while read _initiator; do [ -z "${_initiator%%#*}" ] && continue # Skip comment lines case $_initiator in InitiatorName=*) initiator=${_initiator#InitiatorName=} echo "rd.iscsi.initiator=${initiator}" return 0;; *) ;; esac done < ${initiator_conf} return 1 } # Figure out iBFT session according to session type is_ibft() { [ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ] } kdump_setup_iscsi_device() { local path=$1 local tgt_name; local tgt_ipaddr; local username; local password; local userpwd_str; local username_in; local password_in; local userpwd_in_str; local netdev local srcaddr local idev local netroot_str ; local initiator_str; local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf" local initiator_conf="/etc/iscsi/initiatorname.iscsi" dinfo "Found iscsi component $1" # Check once before getting explicit values, so we can bail out early, # e.g. in case of pure-hardware(all-offload) iscsi. if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then return 1 fi if is_ibft ${path}; then return fi # Remove software iscsi cmdline generated by 95iscsi, # and let kdump regenerate here. rm -f ${initdir}/etc/cmdline.d/95iscsi.conf tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name") tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address") # get and set username and password details username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username") [ "$username" == "<empty>" ] && username="" password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password") [ "$password" == "<empty>" ] && password="" username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in") [ -n "$username" ] && userpwd_str="$username:$password" # get and set incoming username and password details [ "$username_in" == "<empty>" ] && username_in="" password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in") [ "$password_in" == "<empty>" ] && password_in="" [ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in" netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \ sed 's|.*dev \(.*\).*|\1|g') srcaddr=$(echo $netdev | awk '{ print $3; exit }') netdev=$(echo $netdev | awk '{ print $1; exit }') kdump_setup_netdev $netdev $srcaddr # prepare netroot= command line # FIXME: Do we need to parse and set other parameters like protocol, port # iscsi_iface_name, netdev_name, LUN etc. if is_ipv6_address $tgt_ipaddr; then tgt_ipaddr="[$tgt_ipaddr]" fi netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name" [[ -f $netroot_conf ]] || touch $netroot_conf # If netroot target does not exist already, append. if ! grep -q $netroot_str $netroot_conf; then echo $netroot_str >> $netroot_conf dinfo "Appended $netroot_str to $netroot_conf" fi # Setup initator initiator_str=$(kdump_get_iscsi_initiator) [ $? -ne "0" ] && derror "Failed to get initiator name" && return 1 # If initiator details do not exist already, append. if ! grep -q "$initiator_str" $netroot_conf; then echo "$initiator_str" >> $netroot_conf dinfo "Appended "$initiator_str" to $netroot_conf" fi } kdump_check_iscsi_targets () { # If our prerequisites are not met, fail anyways. type -P iscsistart >/dev/null || return 1 kdump_check_setup_iscsi() { local _dev _dev=$1 [[ -L /sys/dev/block/$_dev ]] || return cd "$(readlink -f /sys/dev/block/$_dev)" until [[ -d sys || -d iscsi_session ]]; do cd .. done [[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD" } [[ $hostonly ]] || [[ $mount_needs ]] && { for_each_host_dev_and_slaves_all kdump_check_setup_iscsi } } # hostname -a is deprecated, do it by ourself get_alias() { local ips local entries local alias_set ips=$(hostname -I) for ip in $ips do # in /etc/hosts, alias can come at the 2nd column entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }') if [ $? -eq 0 ]; then alias_set="$alias_set $entries" fi done echo $alias_set } is_localhost() { local hostnames=$(hostname -A) local shortnames=$(hostname -A -s) local aliasname=$(get_alias) local nodename=$1 hostnames="$hostnames $shortnames $aliasname" for name in ${hostnames}; do if [ "$name" == "$nodename" ]; then return 0 fi done return 1 } # retrieves fence_kdump nodes from Pacemaker cluster configuration get_pcs_fence_kdump_nodes() { local nodes # get cluster nodes from cluster cib, get interface and ip address nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -` # nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"' # we need to convert each to node1, node2 ... nodeX in each iteration for node in ${nodelist}; do # convert $node from 'uname="nodeX"' to 'nodeX' eval $node nodename=$uname # Skip its own node name if [ "$nodename" = `hostname` -o "$nodename" = `hostname -s` ]; then continue fi nodes="$nodes $nodename" done echo $nodes } # retrieves fence_kdump args from config file get_pcs_fence_kdump_args() { if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then . $FENCE_KDUMP_CONFIG_FILE echo $FENCE_KDUMP_OPTS fi } get_generic_fence_kdump_nodes() { local filtered local nodes nodes=$(get_option_value "fence_kdump_nodes") for node in ${nodes}; do # Skip its own node name if is_localhost $node; then continue fi filtered="$filtered $node" done echo $filtered } # setup fence_kdump in cluster # setup proper network and install needed files kdump_configure_fence_kdump () { local kdump_cfg_file=$1 local nodes local args if is_generic_fence_kdump; then nodes=$(get_generic_fence_kdump_nodes) elif is_pcs_fence_kdump; then nodes=$(get_pcs_fence_kdump_nodes) # set appropriate options in kdump.conf echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file} args=$(get_pcs_fence_kdump_args) if [ -n "$args" ]; then echo "fence_kdump_args $args" >> ${kdump_cfg_file} fi else # fence_kdump not configured return 1 fi # setup network for each node for node in ${nodes}; do kdump_install_net $node done dracut_install /etc/hosts dracut_install /etc/nsswitch.conf dracut_install $FENCE_KDUMP_SEND } # Install a random seed used to feed /dev/urandom # By the time kdump service starts, /dev/uramdom is already fed by systemd kdump_install_random_seed() { local poolsize=`cat /proc/sys/kernel/random/poolsize` if [ ! -d ${initdir}/var/lib/ ]; then mkdir -p ${initdir}/var/lib/ fi dd if=/dev/urandom of=${initdir}/var/lib/random-seed \ bs=$poolsize count=1 2> /dev/null } remove_cpu_online_rule() { local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules sed -i '/SUBSYSTEM=="cpu"/d' $file } kdump_install_systemd_conf() { local failure_action=$(get_option_value "failure_action") # Kdump turns out to require longer default systemd mount timeout # than 1st kernel(90s by default), we use default 300s for kdump. grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null if [ $? -ne 0 ]; then mkdir -p ${initdir}/etc/systemd/system.conf.d echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf fi # Forward logs to console directly, and don't read Kmsg, this avoids # unneccessary memory consumption and make console output more useful. # Only do so for non fadump image. mkdir -p ${initdir}/etc/systemd/journald.conf.d echo "[Journal]" > ${initdir}/etc/systemd/journald.conf.d/kdump.conf echo "Storage=volatile" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf echo "ReadKMsg=no" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf echo "ForwardToConsole=yes" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf } install() { declare -A unique_netifs local arch _netifs kdump_module_init kdump_install_conf remove_sysctl_conf # Onlining secondary cpus breaks kdump completely on KVM on Power hosts # Though we use maxcpus=1 by default but 40-redhat.rules will bring up all # possible cpus by default. (rhbz1270174 rhbz1266322) # Thus before we get the kernel fix and the systemd rule fix let's remove # the cpu online rule in kdump initramfs. arch=$(uname -m) if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then remove_cpu_online_rule fi if is_ssh_dump_target; then kdump_install_random_seed fi dracut_install -o /etc/adjtime /etc/localtime inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress" chmod +x ${initdir}/kdumpscripts/monitor_dd_progress inst "/bin/dd" "/bin/dd" inst "/bin/tail" "/bin/tail" inst "/bin/date" "/bin/date" inst "/bin/sync" "/bin/sync" inst "/bin/cut" "/bin/cut" inst "/bin/head" "/bin/head" inst "/sbin/makedumpfile" "/sbin/makedumpfile" inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg" inst "/usr/bin/printf" "/sbin/printf" inst "/usr/bin/logger" "/sbin/logger" inst "/usr/bin/chmod" "/sbin/chmod" inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh" inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh" inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh" inst "$moddir/kdump.sh" "/usr/bin/kdump.sh" inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service" systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh" inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service" # Replace existing emergency service and emergency target cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service" cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target" # Also redirect dracut-emergency to kdump error handler ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service" # Check for all the devices and if any device is iscsi, bring up iscsi # target. Ideally all this should be pushed into dracut iscsi module # at some point of time. kdump_check_iscsi_targets _netifs=$(_get_kdump_netifs) if [[ -n "$_netifs" ]]; then kdump_install_nm_netif_allowlist "$_netifs" kdump_install_nic_driver "$_netifs" fi kdump_install_systemd_conf # For the lvm type target under kdump, in /etc/lvm/lvm.conf we can # safely replace "reserved_memory=XXXX"(default value is 8192) with # "reserved_memory=1024" to lower memory pressure under kdump. We do # it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it # actually does nothing. sed -i -e \ 's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \ ${initdir}/etc/lvm/lvm.conf &>/dev/null # Skip initrd-cleanup.service and initrd-parse-etc.service becasue we don't # need to switch root. Instead of removing them, we use ConditionPathExists # to check if /proc/vmcore exists to determine if we are in kdump. sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \ "${initdir}/${systemdsystemunitdir}/initrd-cleanup.service" &> /dev/null sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \ "${initdir}/${systemdsystemunitdir}/initrd-parse-etc.service" &> /dev/null # Save more memory by dropping switch root capability dracut_no_switch_root } modules.d/99kdumpbase/kdump-error-handler.service 0000644 00000001646 15053306611 0016046 0 ustar 00 # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # This service will run the real kdump error handler code. Executing the # failure action configured in kdump.conf [Unit] Description=Kdump Error Handler DefaultDependencies=no After=systemd-vconsole-setup.service Wants=systemd-vconsole-setup.service AllowIsolate=yes [Service] Environment=HOME=/ Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot WorkingDirectory=/ ExecStart=/bin/kdump-error-handler.sh Type=oneshot StandardInput=tty-force StandardOutput=inherit StandardError=inherit KillMode=process IgnoreSIGPIPE=no # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/91crypt-gpg/crypt-gpg-lib.sh 0000755 00000005072 15053306611 0013547 0 ustar 00 #!/bin/sh command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh # gpg_decrypt mnt_point keypath keydev device # # Decrypts symmetrically encrypted (password or OpenPGP smartcard) key to standard output. # # mnt_point - mount point where <keydev> is already mounted # keypath - GPG encrypted key path relative to <mnt_point> # keydev - device on which key resides; only to display in prompt # device - device to be opened by cryptsetup; only to display in prompt gpg_decrypt() { local mntp="$1" local keypath="$2" local keydev="$3" local device="$4" local gpghome=/tmp/gnupg local opts="--homedir $gpghome --no-mdc-warning --skip-verify --quiet" opts="$opts --logger-file /dev/null --batch --no-tty --passphrase-fd 0" mkdir -m 0700 -p "$gpghome" # Setup GnuPG home and gpg-agent for usage of OpenPGP smartcard. # This requires GnuPG >= 2.1, as it uses the new ,,pinentry-mode´´ # feature, which - when set to ,,loopback´´ - allows us to pipe # the smartcard's pin to GnuPG (instead of using a normal pinentry # program needed with GnuPG < 2.1), making for uncomplicated # integration with the existing codebase. local useSmartcard="0" local gpgMajorVersion="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* ([0-9]*).*|\1|p')" local gpgMinorVersion="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* [0-9]*\.([0-9]*).*|\1|p')" if [ "${gpgMajorVersion}" -ge 2 ] && [ "${gpgMinorVersion}" -ge 1 ] \ && [ -f /root/crypt-public-key.gpg ] && getargbool 1 rd.luks.smartcard ; then useSmartcard="1" echo "allow-loopback-pinentry" >> "$gpghome/gpg-agent.conf" GNUPGHOME="$gpghome" gpg-agent --quiet --daemon GNUPGHOME="$gpghome" gpg --quiet --no-tty --import < /root/crypt-public-key.gpg local smartcardSerialNumber="$(GNUPGHOME=$gpghome gpg --no-tty --card-status \ | sed -n -r -e 's|Serial number.*: ([0-9]*)|\1|p' | tr -d '\n')" if [ -n "${smartcardSerialNumber}" ]; then inputPrompt="PIN (OpenPGP card ${smartcardSerialNumber})" fi GNUPGHOME="$gpghome" gpg-connect-agent 1>/dev/null learn /bye opts="$opts --pinentry-mode=loopback" fi ask_for_password \ --cmd "gpg $opts --decrypt $mntp/$keypath" \ --prompt "${inputPrompt:-Password ($keypath on $keydev for $device)}" \ --tries 3 --tty-echo-off # Clean up the smartcard gpg-agent if [ "${useSmartcard}" == "1" ]; then GNUPGHOME="$gpghome" gpg-connect-agent 1>/dev/null killagent /bye fi rm -rf -- "$gpghome" } modules.d/91crypt-gpg/README 0000644 00000005043 15053306611 0011406 0 ustar 00 # Directions for changing a system from password-based gpg keyfile # to smartcard-based gpg keyfile # Be sure that you meet the following requirements: # 1. GnuPG >= 2.1 installed with # * Smartcard support enabled (scdaemon must be built) # * Direct CCID access built into scdaemon # 2. A password-based gpg keyfile ${KEYFILE} (e.g. "keyfile.gpg"): # That is, a file containing the slot key for LUKS, which # has been encrypted symmetrically with GnuPG using # a password. # 3. Your public OpenPGP identity ${RECIPIENT} (e.g. "3A696356") # 4. An OpenPGP smartcard holding the decryption key associated # with your public identity # 5. A CCID smartcard reader # Notes: Requirement 4. and 5. can of course be one device, e.g. # a USB token with an integrated OpenPGP smartcard # Make a backup of your keyfile (assuming it lies on the boot partition) $ cp /boot/${KEYFILE} /safe/place/keyfile.bak.gpg # Change your keyfile from purely password-based to both # password-based and key-based (you can then decrypt the keyfile # with either method). As an example aes256 is chosen, the cipher # is not important to this guide, but do note that your kernel # must support it at boot time (be it built into the kernel image # or loaded as a module from the initramfs). $ cat /safe/place/keyfile.bak.gpg | gpg -d | gpg --encrypt --recipient ${RECIPIENT} --cipher-algo aes256 --armor -c > /safe/place/keyfile_sc.gpg # Verify that you can decrypt your new keyfile both with the password # and your smartcard. # (with smartcard inserted, you should be prompted for your PIN, unless # you already did so and have not yet timed out) $ gpg -d /safe/place/keyfile_sc.gpg # (with smartcard disconnected, you should be prompted for your password) $ gpg -d /safe/place/keyfile_sc.gpg # After verification, replace your old keyfile with your new one $ su -c 'cp /safe/place/keyfile_sc.gpg /boot/${KEYFILE}' # Export your public key to where crypt-gpg can find it $ gpg --armor --export-options export-minimal --export ${RECIPIENT} > /safe/place/crypt-public-key.gpg $ su -c 'cp /safe/place/crypt-public-key.gpg /etc/dracut.conf.d/crypt-public-key.gpg' # Rebuild your initramfs as usual # When booting with any of the requirements not met, crypt-gpg will default to password-based keyfile unlocking. # If all requirements are met and smartcard support is not disabled by setting the kernel option "rd.luks.smartcard=0" # crypt-gpg will try find and use a connected OpenPGP smartcard by prompting you for the PIN and then # unlocking the gpg keyfile with the smartcard. modules.d/91crypt-gpg/module-setup.sh 0000755 00000002745 15053306611 0013516 0 ustar 00 #!/bin/bash # GPG support is optional # called by dracut check() { require_binaries gpg || return 1 if sc_requested; then if ! sc_supported; then dwarning "crypt-gpg: GnuPG >= 2.1 with scdaemon and libusb required for ccid smartcard support" return 1 fi return 0 fi return 255 } # called by dracut depends() { echo crypt } # called by dracut install() { inst_multiple gpg inst "$moddir/crypt-gpg-lib.sh" "/lib/dracut-crypt-gpg-lib.sh" if sc_requested; then inst_multiple gpg-agent inst_multiple gpg-connect-agent inst_multiple /usr/libexec/scdaemon cp "$(sc_public_key)" "${initdir}/root/" fi } sc_public_key() { echo -n "/etc/dracut.conf.d/crypt-public-key.gpg" } # CCID Smartcard support requires GnuPG >= 2.1 with scdaemon and libusb sc_supported() { local gpgMajor="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* ([0-9]*).*|\1|p')" local gpgMinor="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* [0-9]*\.([0-9]*).*|\1|p')" if [[ "${gpgMajor}" -gt 2 || "${gpgMajor}" -eq 2 && "${gpgMinor}" -ge 1 ]] && \ require_binaries gpg-agent && require_binaries gpg-connect-agent && require_binaries /usr/libexec/scdaemon && (ldd /usr/libexec/scdaemon | grep libusb > /dev/null); then return 0 else return 1 fi } sc_requested() { if [ -f "$(sc_public_key)" ]; then return 0 else return 1 fi } modules.d/98usrmount/mount-usr.sh 0000755 00000007026 15053306611 0013030 0 ustar 00 #!/bin/sh type info >/dev/null 2>&1 || . /lib/dracut-lib.sh type fsck_single >/dev/null 2>&1 || . /lib/fs-lib.sh filtersubvol() { local _oldifs _oldifs="$IFS" IFS="," set $* IFS="$_oldifs" while [ $# -gt 0 ]; do case $1 in subvol\=*) :;; *) printf '%s' "${1}," ;; esac shift done } fsck_usr() { local _dev=$1 local _fs=$2 local _fsopts=$3 local _fsckoptions if [ -f "$NEWROOT"/fsckoptions ]; then _fsckoptions=$(cat "$NEWROOT"/fsckoptions) fi if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then _fsckoptions="-f $_fsckoptions" elif [ -f "$NEWROOT"/.autofsck ]; then [ -f "$NEWROOT"/etc/sysconfig/autofsck ] && . "$NEWROOT"/etc/sysconfig/autofsck if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then AUTOFSCK_OPT="$AUTOFSCK_OPT -f" fi if [ -n "$AUTOFSCK_SINGLEUSER" ]; then warn "*** Warning -- the system did not shut down cleanly. " warn "*** Dropping you to a shell; the system will continue" warn "*** when you leave the shell." emergency_shell fi _fsckoptions="$AUTOFSCK_OPT $_fsckoptions" fi fsck_single "$_dev" "$_fs" "$_fsopts" "$_fsckoptions" } mount_usr() { local _dev _mp _fs _opts _rest _usr_found _ret _freq _passno # check, if we have to mount the /usr filesystem while read _dev _mp _fs _opts _freq _passno || [ -n "$_dev" ]; do [ "${_dev%%#*}" != "$_dev" ] && continue if [ "$_mp" = "/usr" ]; then case "$_dev" in LABEL=*) _dev="$(echo $_dev | sed 's,/,\\x2f,g')" _dev="/dev/disk/by-label/${_dev#LABEL=}" ;; UUID=*) _dev="${_dev#block:}" _dev="/dev/disk/by-uuid/${_dev#UUID=}" ;; esac if strstr "$_opts" "subvol=" && \ [ "${root#block:}" -ef $_dev ] && \ [ -n "$rflags" ]; then # for btrfs subvolumes we have to mount /usr with the same rflags rflags=$(filtersubvol "$rflags") rflags=${rflags%%,} _opts="${_opts:+${_opts},}${rflags}" elif getargbool 0 ro; then # if "ro" is specified, we want /usr to be mounted read-only _opts="${_opts:+${_opts},}ro" elif getargbool 0 rw; then # if "rw" is specified, we want /usr to be mounted read-write _opts="${_opts:+${_opts},}rw" fi echo "$_dev ${NEWROOT}${_mp} $_fs ${_opts} $_freq $_passno" _usr_found="1" break fi done < "$NEWROOT/etc/fstab" >> /etc/fstab if [ "$_usr_found" != "" ]; then # we have to mount /usr _fsck_ret=0 if ! getargbool 0 rd.skipfsck; then if [ "0" != "${_passno:-0}" ]; then fsck_usr "$_dev" "$_fs" "$_opts" _fsck_ret=$? [ $_fsck_ret -ne 255 ] && echo $_fsck_ret >/run/initramfs/usr-fsck fi fi info "Mounting /usr with -o $_opts" mount "$NEWROOT/usr" 2>&1 | vinfo if ! ismounted "$NEWROOT/usr"; then warn "Mounting /usr to $NEWROOT/usr failed" warn "*** Dropping you to a shell; the system will continue" warn "*** when you leave the shell." emergency_shell fi fi } if [ -f "$NEWROOT/etc/fstab" ]; then mount_usr fi modules.d/98usrmount/module-setup.sh 0000755 00000000446 15053306611 0013501 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $mount_needs ]] && return 1 return 0 } # called by dracut depends() { echo 'fs-lib' } # called by dracut install() { if ! dracut_module_included "systemd"; then inst_hook pre-pivot 50 "$moddir/mount-usr.sh" fi : } modules.d/71prefixdevname-tools/module-setup.sh 0000755 00000000313 15053306611 0015560 0 ustar 00 #!/bin/bash # Include the prefixdevname tools only if this was explicitely requested check() { return 255 } install() { inst /usr/lib/udev/prefixdevname inst_rules 71-prefixdevname.rules } modules.d/05busybox/module-setup.sh 0000755 00000001072 15053306611 0013260 0 ustar 00 #!/bin/bash # called by dracut check() { require_binaries busybox || return 1 return 255 } # called by dracut depends() { return 0 } # called by dracut install() { local _i _path _busybox local _progs=() _busybox=$(find_binary busybox) inst $_busybox /usr/bin/busybox for _i in $($_busybox --list); do [[ ${_i} == busybox ]] && continue _progs+=("${_i}") done for _i in "${_progs[@]}"; do _path=$(find_binary "$_i") [ -z "$_path" ] && continue ln_r /usr/bin/busybox $_path done } modules.d/80lvmmerge/README.md 0000644 00000004055 15053306611 0011707 0 ustar 00 # lvmmerge - dracut module ## Preparation - ensure that the lvm thin pool is big enough - backup any (most likely /boot and /boot/efi) device with: ``` # mkdir /restoredev # dev=<device>; umount $dev; dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev"); mount $dev ``` - backup the MBR ``` # dev=<device>; dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") bs=446 count=1 # ls -l /dev/disk/by-path/virtio-pci-0000\:00\:07.0 lrwxrwxrwx. 1 root root 9 Jul 24 04:27 /dev/disk/by-path/virtio-pci-0000:00:07.0 -> ../../vda ``` - backup some partitions ``` # dev=/dev/disk/by-path/virtio-pci-0000:00:07.0 # dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") bs=446 count=1 # umount /boot/efi # dev=/dev/disk/by-partuuid/687177a8-86b3-4e37-a328-91d20db9563c # dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") # umount /boot # dev=/dev/disk/by-partuuid/4fdf99e9-4f28-4207-a26f-c76546824eaf # dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") ``` Final /restoredev ``` # ls -al /restoredev/ total 1253380 drwx------. 2 root root 250 Jul 24 04:38 . dr-xr-xr-x. 18 root root 242 Jul 24 04:32 .. -rw-------. 1 root root 209715200 Jul 24 04:34 dev-disk-by\x2dpartuuid-4fdf99e9\x2d4f28\x2d4207\x2da26f\x2dc76546824eaf -rw-------. 1 root root 1073741824 Jul 24 04:34 dev-disk-by\x2dpartuuid-687177a8\x2d86b3\x2d4e37\x2da328\x2d91d20db9563c -rw-------. 1 root root 446 Jul 24 04:38 dev-disk-by\x2dpath-virtio\x2dpci\x2d0000:00:07.0 ``` - make a thin snapshot ``` # lvm lvcreate -pr -s rhel/root --name reset ``` - mark the snapshot with a tag ``` # lvm lvchange --addtag reset rhel/reset ``` - remove /restoredev ``` # rm -fr /restoredev ``` ## Operation If a boot entry with ```rd.lvm.mergetags=<tag>``` is selected and there are LVs with ```<tag>``` dracut will - make a copy of the snapshot - merge it back to the original - rename the copy back to the name of the snapshot - if /restordev appears in the root, then it will restore the images found in that directory. This can be used to restore /boot and /boot/efi and the MBR of the boot device modules.d/80lvmmerge/lvmmerge.sh 0000755 00000006017 15053306611 0012605 0 ustar 00 #!/bin/bash type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh do_merge() { sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 1/' \ /etc/lvm/lvm.conf systemctl --no-block stop sysroot.mount swapoff -a umount -R /sysroot for tag in $(getargs rd.lvm.mergetags); do lvm vgs --noheadings -o vg_name | \ while read -r vg || [[ -n $vg ]]; do unset LVS declare -a LVS lvs=$(lvm lvs --noheadings -o lv_name "$vg") for lv in $lvs; do lvm lvchange -an "$vg/$lv" tags=$(trim "$(lvm lvs --noheadings -o lv_tags "$vg/$lv")") strstr ",${tags}," ",${tag}," || continue if ! lvm lvs --noheadings -o lv_name "${vg}/${lv}_dracutsnap" &>/dev/null; then info "Creating backup ${lv}_dracutsnap of ${vg}/${lv}" lvm lvcreate -pr -s "${vg}/${lv}" --name "${lv}_dracutsnap" fi lvm lvchange --addtag "$tag" "${vg}/${lv}_dracutsnap" info "Merging back ${vg}/${lv} to the original LV" lvm lvconvert --merge "${vg}/${lv}" LVS+=($lv) done systemctl --no-block stop sysroot.mount udevadm settle for ((i=0; i < 100; i++)); do lvm vgchange -an "$vg" && break sleep 0.5 done udevadm settle lvm vgchange -ay "$vg" udevadm settle for lv in "${LVS[@]}"; do info "Renaming ${lv}_dracutsnap backup to ${vg}/${lv}" lvm lvrename "$vg" "${lv}_dracutsnap" "${lv}" done udevadm settle done done systemctl --no-block reset-failed systemd-fsck-root systemctl --no-block start systemd-fsck-root systemctl --no-block reset-failed sysroot.mount systemctl --no-block start sysroot.mount for ((i=0; i < 100; i++)); do [[ -d /sysroot/dev ]] && break sleep 0.5 systemctl --no-block start sysroot.mount done if [[ -d /sysroot/restoredev ]]; then ( if cd /sysroot/restoredev; then # restore devices and partitions for i in *; do target=$(systemd-escape -pu "$i") if ! [[ -b $target ]]; then warn "Not restoring $target, as the device does not exist" continue fi # Just in case umount "$target" &> /dev/null info "Restoring $target" dd if="$i" of="$target" |& vinfo done fi ) mount -o remount,rw /sysroot rm -fr /sysroot/restoredev fi info "Rebooting" reboot } if getarg rd.lvm.mergetags; then do_merge fi modules.d/80lvmmerge/module-setup.sh 0000755 00000000650 15053306611 0013407 0 ustar 00 #!/bin/bash # called by dracut check() { # No point trying to support lvm if the binaries are missing require_binaries lvm dd swapoff || return 1 return 255 } # called by dracut depends() { echo lvm dracut-systemd systemd return 0 } installkernel() { hostonly="" instmods dm-snapshot } # called by dracut install() { inst_multiple dd swapoff inst_hook cleanup 01 "$moddir/lvmmerge.sh" } modules.d/02systemd-networkd/module-setup.sh 0000755 00000004277 15053306611 0015117 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $mount_needs ]] && return 1 if ! dracut_module_included "systemd"; then derror "systemd-networkd needs systemd in the initramfs" return 1 fi return 255 } # called by dracut depends() { echo "systemd kernel-network-modules" } installkernel() { return 0 } # called by dracut install() { inst_multiple -o \ $systemdutildir/systemd-networkd \ $systemdutildir/systemd-networkd-wait-online \ $systemdsystemunitdir/systemd-networkd-wait-online.service \ $systemdsystemunitdir/systemd-networkd.service \ $systemdsystemunitdir/systemd-networkd.socket \ $systemdutildir/network/99-default.link \ networkctl ip #hostnamectl timedatectl # $systemdutildir/systemd-timesyncd \ # $systemdutildir/systemd-timedated \ # $systemdutildir/systemd-hostnamed \ # $systemdutildir/systemd-resolvd \ # $systemdutildir/systemd-resolve-host \ # $systemdsystemunitdir/systemd-resolved.service \ # $systemdsystemunitdir/systemd-hostnamed.service \ # $systemdsystemunitdir/systemd-timesyncd.service \ # $systemdsystemunitdir/systemd-timedated.service \ # $systemdsystemunitdir/time-sync.target \ # /etc/systemd/resolved.conf \ # inst_dir /var/lib/systemd/clock grep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" grep '^systemd-network:' /etc/group >> "$initdir/etc/group" # grep '^systemd-timesync:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" # grep '^systemd-timesync:' /etc/group >> "$initdir/etc/group" _arch=$(uname -m) inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \ {"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" \ {"tls/$_arch/",tls/,"$_arch/",}"libnss_myhostname.so.*" \ {"tls/$_arch/",tls/,"$_arch/",}"libnss_resolve.so.*" for i in \ systemd-networkd-wait-online.service \ systemd-networkd.service \ systemd-networkd.socket # systemd-timesyncd.service do systemctl -q --root "$initdir" enable "$i" done } modules.d/95ssh-client/module-setup.sh 0000755 00000004023 15053306611 0013646 0 ustar 00 #!/bin/bash # fixme: assume user is root # called by dracut check() { [[ $mount_needs ]] && return 1 # If our prerequisites are not met, fail. require_binaries ssh scp || return 1 if [[ $sshkey ]]; then [ ! -f $sshkey ] && { derror "ssh key: $sshkey is not found!" return 1 } fi return 255 } # called by dracut depends() { # We depend on network modules being loaded echo network } inst_sshenv() { if [ -d /root/.ssh ]; then inst_dir /root/.ssh chmod 700 ${initdir}/root/.ssh fi # Copy over ssh key and knowhosts if needed [[ $sshkey ]] && { inst_simple $sshkey [[ -f /root/.ssh/known_hosts ]] && inst_simple /root/.ssh/known_hosts [[ -f /etc/ssh/ssh_known_hosts ]] && inst_simple /etc/ssh/ssh_known_hosts } # Copy over root and system-wide ssh configs. [[ -f /root/.ssh/config ]] && inst_simple /root/.ssh/config if [[ -f /etc/ssh/ssh_config ]]; then inst_simple /etc/ssh/ssh_config sed -i -e 's/\(^[[:space:]]*\)ProxyCommand/\1# ProxyCommand/' ${initdir}/etc/ssh/ssh_config while read key val || [ -n "$key" ]; do if [[ $key == "GlobalKnownHostsFile" ]]; then inst_simple "$val" # Copy customized UserKnowHostsFile elif [[ $key == "UserKnownHostsFile" ]]; then # Make sure that ~/foo will be copied as /root/foo in kdump's initramfs if str_starts "$val" "~/"; then val="/root/${val#"~/"}" fi inst_simple "$val" fi done < /etc/ssh/ssh_config fi return 0 } # called by dracut install() { local _nsslibs inst_multiple ssh scp inst_sshenv _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|') _nsslibs=${_nsslibs#|} _nsslibs=${_nsslibs%|} inst_libdir_file -n "$_nsslibs" 'libnss_*.so*' } modules.d/95nbd/nbdroot.sh 0000755 00000007264 15053306611 0011376 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh PATH=/usr/sbin:/usr/bin:/sbin:/bin # Huh? Empty $1? [ -z "$1" ] && exit 1 # Huh? Empty $2? [ -z "$2" ] && exit 1 # Huh? Empty $3? [ -z "$3" ] && exit 1 # root is in the form root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]] netif="$1" nroot="$2" NEWROOT="$3" # If it's not nbd we don't continue [ "${nroot%%:*}" = "nbd" ] || return nroot=${nroot#nbd:} nbdserver=${nroot%%:*}; nroot=${nroot#*:} nbdport=${nroot%%:*}; nroot=${nroot#*:} nbdfstype=${nroot%%:*}; nroot=${nroot#*:} nbdflags=${nroot%%:*} nbdopts=${nroot#*:} if [ "$nbdopts" = "$nbdflags" ]; then unset nbdopts fi if [ "$nbdflags" = "$nbdfstype" ]; then unset nbdflags fi if [ "$nbdfstype" = "$nbdport" ]; then unset nbdfstype fi if [ -z "$nbdfstype" ]; then nbdfstype=auto fi # look through the NBD options and pull out the ones that need to # go before the host etc. Append a ',' so we know we terminate the loop nbdopts=${nbdopts}, while [ -n "$nbdopts" ]; do f=${nbdopts%%,*} nbdopts=${nbdopts#*,} if [ -z "$f" ]; then break fi if [ -z "${f%bs=*}" -o -z "${f%timeout=*}" ]; then preopts="$preopts $f" continue fi opts="$opts $f" done # look through the flags and see if any are overridden by the command line nbdflags=${nbdflags}, while [ -n "$nbdflags" ]; do f=${nbdflags%%,*} nbdflags=${nbdflags#*,} if [ -z "$f" ]; then break fi if [ "$f" = "ro" -o "$f" = "rw" ]; then nbdrw=$f continue fi fsopts=${fsopts:+$fsopts,}$f done getarg ro && nbdrw=ro getarg rw && nbdrw=rw fsopts=${fsopts:+$fsopts,}${nbdrw} # XXX better way to wait for the device to be made? i=0 while [ ! -b /dev/nbd0 ]; do [ $i -ge 20 ] && exit 1 if [ $UDEVVERSION -ge 143 ]; then udevadm settle --exit-if-exists=/dev/nbd0 else sleep 0.1 fi i=$(($i + 1)) done # If we didn't get a root= on the command line, then we need to # add the udev rules for mounting the nbd0 device if [ "$root" = "block:/dev/root" -o "$root" = "dhcp" ]; then printf 'KERNEL=="nbd0", ENV{DEVTYPE}!="partition", ENV{ID_FS_TYPE}=="?*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-nbd-root.rules udevadm control --reload type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh write_fs_tab /dev/root "$nbdfstype" "$fsopts" wait_for_dev -n /dev/root if [ -z "$DRACUT_SYSTEMD" ]; then printf '/bin/mount %s\n' \ "$NEWROOT" \ > $hookdir/mount/01-$$-nbd.sh fi fi if strstr "$(nbd-client --help 2>&1)" "systemd-mark"; then preopts="--systemd-mark $preopts" fi if [ "$nbdport" -gt 0 ] 2>/dev/null; then if [ -z "$DRACUT_SYSTEMD" ]; then nbd-client "$nbdserver" $nbdport /dev/nbd0 $preopts $opts || exit 1 else systemd-run --no-block --service-type=forking --quiet \ --description="nbd nbd0" \ -p 'DefaultDependencies=no' \ -p 'KillMode=none' \ --unit="nbd0" -- nbd-client "$nbdserver" $nbdport /dev/nbd0 $preopts $opts >/dev/null 2>&1 || exit 1 fi else if [ -z "$DRACUT_SYSTEMD" ]; then nbd-client -name "$nbdport" "$nbdserver" /dev/nbd0 $preopts $opts || exit 1 else systemd-run --no-block --service-type=forking --quiet \ --description="nbd nbd0" \ -p 'DefaultDependencies=no' \ -p 'KillMode=none' \ --unit="nbd0" -- nbd-client -name "$nbdport" "$nbdserver" /dev/nbd0 $preopts $opts >/dev/null 2>&1 || exit 1 fi fi # NBD doesn't emit uevents when it gets connected, so kick it echo change > /sys/block/nbd0/uevent udevadm settle need_shutdown exit 0 modules.d/95nbd/parse-nbdroot.sh 0000755 00000003334 15053306611 0012500 0 ustar 00 #!/bin/sh # # Preferred format: # root=nbd:srv:port/exportname[:fstype[:rootflags[:nbdopts]]] # [root=*] netroot=nbd:srv:port/exportname[:fstype[:rootflags[:nbdopts]]] # # nbdopts is a comma separated list of options to give to nbd-client # # root= takes precedence over netroot= if root=nbd[...] # # Sadly there's no easy way to split ':' separated lines into variables netroot_to_var() { local v=${1}: set -- while [ -n "$v" ]; do set -- "$@" "${v%%:*}" v=${v#*:} done unset server port server=$2; port=$3; } # This script is sourced, so root should be set. But let's be paranoid [ -z "$root" ] && root=$(getarg root=) if [ -z "$netroot" ]; then for netroot in $(getargs netroot=); do [ "${netroot%%:*}" = "nbd" ] && break done [ "${netroot%%:*}" = "nbd" ] || unset netroot fi # Root takes precedence over netroot if [ "${root%%:*}" = "nbd" ] ; then if [ -n "$netroot" ] ; then warn "root takes precedence over netroot. Ignoring netroot" fi netroot=$root unset root fi # If it's not nbd we don't continue [ "${netroot%%:*}" = "nbd" ] || return if [ -n "${DRACUT_SYSTEMD}" ] && [ "$root" = "dhcp" ]; then echo "root=$netroot" > /etc/cmdline.d/root.conf systemctl --no-block daemon-reload fi # Check required arguments netroot_to_var $netroot [ -z "$server" ] && die "Argument server for nbdroot is missing" [ -z "$port" ] && die "Argument port for nbdroot is missing" # NBD actually supported? incol2 /proc/devices nbd || modprobe nbd || die "nbdroot requested but kernel/initrd does not support nbd" # Done, all good! rootok=1 # Shut up init error check if [ -z "$root" ]; then root=block:/dev/root wait_for_dev -n /dev/root fi modules.d/95nbd/nbd-generator.sh 0000755 00000002200 15053306611 0012437 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ -z "$root" ] && root=$(getarg root=) [ "${root%%:*}" = "nbd" ] || exit 0 GENERATOR_DIR="$2" [ -z "$GENERATOR_DIR" ] && exit 1 [ -d "$GENERATOR_DIR" ] || mkdir "$GENERATOR_DIR" ROOTFLAGS="$(getarg rootflags)" nroot=${root#nbd:} nbdserver=${nroot%%:*}; nroot=${nroot#*:} nbdport=${nroot%%:*}; nroot=${nroot#*:} nbdfstype=${nroot%%:*}; nroot=${nroot#*:} nbdflags=${nroot%%:*} if [ "$nbdflags" = "$nbdfstype" ]; then unset nbdflags fi if [ "$nbdfstype" = "$nbdport" ]; then unset nbdfstype fi [ -n "$nbdflags" ] && ROOTFLAGS="$nbdflags" if getarg "ro"; then if [ -n "$ROOTFLAGS" ]; then ROOTFLAGS="$ROOTFLAGS,ro" else ROOTFLAGS="ro" fi fi if [ -n "$nbdfstype" ]; then ROOTFSTYPE="$nbdfstype" else ROOTFSTYPE=$(getarg rootfstype=) || unset ROOTFSTYPE fi { echo "[Unit]" echo "Before=initrd-root-fs.target" echo "[Mount]" echo "Where=/sysroot" echo "What=/dev/root" [ -n "$ROOTFSTYPE" ] && echo "Type=${ROOTFSTYPE}" [ -n "$ROOTFLAGS" ] && echo "Options=${ROOTFLAGS}" } > "$GENERATOR_DIR"/sysroot.mount exit 0 modules.d/95nbd/module-setup.sh 0000755 00000002000 15053306611 0012331 0 ustar 00 #!/bin/bash # called by dracut check() { local _rootdev # if an nbd device is not somewhere in the chain of devices root is # mounted on, fail the hostonly check. [[ $hostonly ]] || [[ $mount_needs ]] && { is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;} _rootdev=$(find_root_block_device) [[ -b /dev/block/$_rootdev ]] || return 1 check_block_and_slaves is_nbd "$_rootdev" || return 255 } require_binaries nbd-client || return 1 return 0 } # called by dracut depends() { # We depend on network modules being loaded echo network rootfs-block } # called by dracut installkernel() { instmods nbd } # called by dracut install() { inst nbd-client inst_hook cmdline 90 "$moddir/parse-nbdroot.sh" inst_script "$moddir/nbdroot.sh" "/sbin/nbdroot" if dracut_module_included "systemd-initrd"; then inst_script "$moddir/nbd-generator.sh" $systemdutildir/system-generators/dracut-nbd-generator fi dracut_need_initqueue } modules.d/95fstab-sys/mount-sys.sh 0000755 00000002405 15053306611 0013045 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh fstab_mount() { local _dev _mp _fs _opts _dump _pass _rest test -e "$1" || return 1 info "Mounting from $1" while read _dev _mp _fs _opts _dump _pass _rest || [ -n "$_dev" ]; do [ -z "${_dev%%#*}" ] && continue # Skip comment lines ismounted $_mp && continue # Skip mounted filesystem if [ "$_pass" -gt 0 ] && ! strstr "$_opts" _netdev; then fsck_single "$_dev" "$_fs" "$_opts" fi _fs=$(det_fs "$_dev" "$_fs") info "Mounting $_dev" if [ -d "$NEWROOT/$_mp" ]; then mount -v -t $_fs -o $_opts $_dev "$NEWROOT/$_mp" 2>&1 | vinfo else [ -d "$_mp" ] || mkdir -p "$_mp" mount -v -t $_fs -o $_opts $_dev $_mp 2>&1 | vinfo fi done < $1 return 0 } # systemd will mount and run fsck from /etc/fstab and we don't want to # run into a race condition. if [ -z "$DRACUT_SYSTEMD" ]; then [ -f /etc/fstab ] && fstab_mount /etc/fstab fi # prefer $NEWROOT/etc/fstab.sys over local /etc/fstab.sys if [ -f $NEWROOT/etc/fstab.sys ]; then fstab_mount $NEWROOT/etc/fstab.sys elif [ -f /etc/fstab.sys ]; then fstab_mount /etc/fstab.sys fi modules.d/95fstab-sys/module-setup.sh 0000755 00000000461 15053306611 0013512 0 ustar 00 #!/bin/bash # called by dracut check() { test -f /etc/fstab.sys || [[ -n $add_fstab || -n $fstab_lines ]] } # called by dracut depends() { echo fs-lib } # called by dracut install() { [ -f /etc/fstab.sys ] && inst_simple /etc/fstab.sys inst_hook pre-pivot 00 "$moddir/mount-sys.sh" } modules.d/95nfs/nfs-start-rpc.sh 0000755 00000001546 15053306611 0012452 0 ustar 00 #!/bin/sh if modprobe sunrpc || strstr "$(cat /proc/filesystems)" rpc_pipefs; then [ ! -d /var/lib/nfs/rpc_pipefs/nfs ] && \ mount -t rpc_pipefs rpc_pipefs /var/lib/nfs/rpc_pipefs # Start rpcbind or rpcbind # FIXME occasionally saw 'rpcbind: fork failed: No such device' -- why? command -v portmap >/dev/null && [ -z "$(pidof portmap)" ] && portmap if command -v rpcbind >/dev/null && [ -z "$(pidof rpcbind)" ]; then mkdir -p /run/rpcbind rpcbind fi # Start rpc.statd as mount won't let us use locks on a NFSv4 # filesystem without talking to it. NFSv4 does locks internally, # rpc.lockd isn't needed [ -z "$(pidof rpc.statd)" ] && rpc.statd [ -z "$(pidof rpc.idmapd)" ] && rpc.idmapd else warn 'Kernel module "sunrpc" not in the initramfs, or support for filesystem "rpc_pipefs" missing!' fi modules.d/95nfs/nfsroot-cleanup.sh 0000755 00000001515 15053306611 0013062 0 ustar 00 #!/bin/sh type incol2 >/dev/null 2>&1 || . /lib/dracut-lib.sh [ -f /tmp/nfs.rpc_pipefs_path ] && rpcpipefspath=`cat /tmp/nfs.rpc_pipefs_path` [ -z "$rpcpipefspath" ] && rpcpipefspath=var/lib/nfs/rpc_pipefs pid=$(pidof rpc.statd) [ -n "$pid" ] && kill $pid pid=$(pidof rpc.idmapd) [ -n "$pid" ] && kill $pid pid=$(pidof rpcbind) [ -n "$pid" ] && kill $pid if incol2 /proc/mounts /var/lib/nfs/rpc_pipefs; then # try to create the destination directory [ -d $NEWROOT/$rpcpipefspath ] || \ mkdir -m 0755 -p $NEWROOT/$rpcpipefspath 2>/dev/null if [ -d $NEWROOT/$rpcpipefspath ]; then # mount --move does not seem to work??? mount --bind /var/lib/nfs/rpc_pipefs $NEWROOT/$rpcpipefspath umount /var/lib/nfs/rpc_pipefs 2>/dev/null else umount /var/lib/nfs/rpc_pipefs 2>/dev/null fi fi modules.d/95nfs/nfsroot.sh 0000755 00000001313 15053306611 0011431 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh . /lib/nfs-lib.sh [ "$#" = 3 ] || exit 1 # root is in the form root=nfs[4]:[server:]path[:options], either from # cmdline or dhcp root-path netif="$1" root="$2" NEWROOT="$3" nfs_to_var $root $netif [ -z "$server" ] && die "Required parameter 'server' is missing" mount_nfs $root $NEWROOT $netif && { [ -e /dev/root ] || ln -s null /dev/root ; [ -e /dev/nfs ] || ln -s null /dev/nfs; } [ -f $NEWROOT/etc/fstab ] && cat $NEWROOT/etc/fstab > /dev/null # inject new exit_if_exists echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -- "$job"' > $hookdir/initqueue/nfs.sh # force udevsettle to break > $hookdir/initqueue/work need_shutdown modules.d/95nfs/nfs-lib.sh 0000755 00000011044 15053306611 0011273 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh . /lib/net-lib.sh # TODO: make these things not pollute the calling namespace # nfs_to_var NFSROOT [NETIF] # use NFSROOT to set $nfs, $server, $path, and $options. # NFSROOT is something like: nfs[4]:<server>:/<path>[:<options>|,<options>] # NETIF is used to get information from DHCP options, if needed. nfs_to_var() { # Unfortunately, there's multiple styles of nfs "URL" in use, so we need # extra functions to parse them into $nfs, $server, $path, and $options. # FIXME: local netif=${2:-$netif}? case "$1" in nfs://*) rfc2224_nfs_to_var "$1" ;; nfs:*[*) anaconda_nfsv6_to_var "$1" ;; nfs:*:*:/*) anaconda_nfs_to_var "$1" ;; *) nfsroot_to_var "$1" ;; esac # if anything's missing, try to fill it in from DHCP options if [ -z "$server" ] || [ -z "$path" ]; then nfsroot_from_dhcp $2; fi # if there's a "%s" in the path, replace it with the hostname/IP if strstr "$path" "%s"; then local node="" read node < /proc/sys/kernel/hostname [ "$node" = "(none)" ] && node=$(get_ip $2) path=${path%%%s*}$node${path#*%s} # replace only the first %s fi } # root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>] # root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>] nfsroot_to_var() { # strip nfs[4]: local arg="$@:" nfs="${arg%%:*}" arg="${arg##$nfs:}" # check if we have a server if strstr "$arg" ':/' ; then server="${arg%%:/*}" arg="/${arg##*:/}" fi path="${arg%%:*}" # rest are options options="${arg##$path}" # strip leading ":" options="${options##:}" # strip ":" options="${options%%:}" # Does it really start with '/'? [ -n "${path%%/*}" ] && path="error"; #Fix kernel legacy style separating path and options with ',' if [ "$path" != "${path#*,}" ] ; then options=${path#*,} path=${path%%,*} fi } # RFC2224: nfs://<server>[:<port>]/<path> rfc2224_nfs_to_var() { nfs="nfs" server="${1#nfs://}" path="/${server#*/}" server="${server%%/*}" server="${server%%:}" # anaconda compat (nfs://<server>:/<path>) local port="${server##*:}" [ "$port" != "$server" ] && options="port=$port" } # Anaconda-style path with options: nfs:<options>:<server>:/<path> # (without mount options, anaconda is the same as dracut) anaconda_nfs_to_var() { nfs="nfs" options="${1#nfs:}" server="${options#*:}" server="${server%:/*}" options="${options%%:*}" path="/${1##*:/}" } # IPv6 nfs path will be treated separately anaconda_nfsv6_to_var() { nfs="nfs" path="$1" options="${path#*:/}" path="/${options%%:*}" server="${1#*nfs:}" if str_starts $server '['; then server="${server%:/*}" options="${options#*:*}" else server="${server%:/*}" options="${server%%:*}" server="${server#*:}" fi } # nfsroot_from_dhcp NETIF # fill in missing server/path from DHCP options. nfsroot_from_dhcp() { local f for f in /tmp/net.$1.override /tmp/dhclient.$1.dhcpopts; do [ -f $f ] && . $f done [ -n "$new_root_path" ] && nfsroot_to_var "$nfs:$new_root_path" [ -z "$path" ] && [ "$(getarg root=)" = "/dev/nfs" ] && path=/tftpboot/%s [ -z "$server" ] && server=$srv [ -z "$server" ] && server=$new_next_server [ -z "$server" ] && server=$new_dhcp_server_identifier [ -z "$server" ] && server=${new_root_path%%:*} } # Look through $options, fix "rw"/"ro", move "lock"/"nolock" to $nfslock munge_nfs_options() { local f="" flags="" nfsrw="ro" OLDIFS="$IFS" IFS=, for f in $options; do case $f in ro|rw) nfsrw=$f ;; lock|nolock) nfslock=$f ;; *) flags=${flags:+$flags,}$f ;; esac done IFS="$OLDIFS" # Override rw/ro if set on cmdline getarg ro >/dev/null && nfsrw=ro getarg rw >/dev/null && nfsrw=rw options=$nfsrw${flags:+,$flags} } # mount_nfs NFSROOT MNTDIR [NETIF] mount_nfs() { local nfsroot="$1" mntdir="$2" netif="$3" local nfs="" server="" path="" options="" nfs_to_var "$nfsroot" $netif munge_nfs_options if [ "$nfs" = "nfs4" ]; then options=$options${nfslock:+,$nfslock} else # NFSv{2,3} doesn't support using locks as it requires a helper to # transfer the rpcbind state to the new root [ "$nfslock" = "lock" ] \ && warn "Locks unsupported on NFSv{2,3}, using nolock" 1>&2 options=$options,nolock fi mount -t $nfs -o$options "$server:$path" "$mntdir" } modules.d/95nfs/parse-nfsroot.sh 0000755 00000006405 15053306611 0012550 0 ustar 00 #!/bin/sh # # Preferred format: # root=nfs[4]:[server:]path[:options] # # This syntax can come from DHCP root-path as well. # # Legacy format: # root=/dev/nfs nfsroot=[server:]path[,options] # # In Legacy root=/dev/nfs mode, if the 'nfsroot' parameter is not given # on the command line or is empty, the dhcp root-path is used as # [server:]path[:options] or the default "/tftpboot/%s" will be used. # # If server is unspecified it will be pulled from one of the following # sources, in order: # static ip= option on kernel command line # DHCP next-server option # DHCP server-id option # DHCP root-path option # # NFSv4 is only used if explicitly requested with nfs4: prefix, otherwise # NFSv3 is used. # type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh # This script is sourced, so root should be set. But let's be paranoid [ -z "$root" ] && root=$(getarg root=) [ -z "$nfsroot" ] && nfsroot=$(getarg nfsroot=) [ -n "$netroot" ] && oldnetroot="$netroot" # netroot= cmdline argument must be ignored, but must be used if # we're inside netroot to parse dhcp root-path if [ -n "$netroot" ] ; then for n in $(getargs netroot=); do [ "$n" = "$netroot" ] && break done if [ "$n" = "$netroot" ]; then #warn "Ignoring netroot argument for NFS" netroot=$root fi else netroot=$root; fi # LEGACY: nfsroot= is valid only if root=/dev/nfs if [ -n "$nfsroot" ] ; then # @deprecated warn "Argument nfsroot is deprecated and might be removed in a future release. See 'man dracut.kernel' for more information." if [ "$(getarg root=)" != "/dev/nfs" ]; then die "Argument nfsroot only accepted for legacy root=/dev/nfs" fi netroot=nfs:$nfsroot; fi case "$netroot" in /dev/nfs) netroot=nfs;; /dev/*) if [ -n "$oldnetroot" ]; then netroot="$oldnetroot" else unset netroot fi return ;; # LEGACY: root=<server-ip>:/<path [0-9]*:/*|[0-9]*\.[0-9]*\.[0-9]*[!:]|/*) netroot=nfs:$netroot;; esac # Continue if nfs case "${netroot%%:*}" in nfs|nfs4|/dev/nfs);; *) if [ -n "$oldnetroot" ]; then netroot="$oldnetroot" else unset netroot fi return ;; esac # Check required arguments if nfsdomain=$(getarg rd.nfs.domain -d rd_NFS_DOMAIN); then if [ -f /etc/idmapd.conf ]; then sed -i -e \ "s/^[[:space:]#]*Domain[[:space:]]*=.*/Domain = $nfsdomain/g" \ /etc/idmapd.conf fi # and even again after the sed, in case it was not yet specified echo "Domain = $nfsdomain" >> /etc/idmapd.conf fi nfsroot_to_var $netroot [ "$path" = "error" ] && die "Argument nfsroot must contain a valid path!" # Set fstype, might help somewhere fstype=${nfs#/dev/} # Rewrite root so we don't have to parse this uglyness later on again netroot="$fstype:$server:$path:$options" # If we don't have a server, we need dhcp if [ -z "$server" ] ; then DHCPORSERVER="1" fi; # Done, all good! rootok=1 # Shut up init error check or make sure that block parser wont get # confused by having /dev/nfs[4] root="$fstype" echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/nfsroot.sh mkdir -p /var/lib/rpcbind chown rpc:rpc /var/lib/rpcbind chmod 770 /var/lib/rpcbind modules.d/95nfs/module-setup.sh 0000755 00000010454 15053306611 0012370 0 ustar 00 #!/bin/bash # called by dracut check() { # If our prerequisites are not met, fail anyways. require_any_binary rpcbind portmap || return 1 require_binaries rpc.statd mount.nfs mount.nfs4 umount || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ "$fs" == "nfs" ]] && return 0 [[ "$fs" == "nfs3" ]] && return 0 [[ "$fs" == "nfs4" ]] && return 0 done return 255 } return 0 } # called by dracut depends() { # We depend on network modules being loaded echo network } # called by dracut installkernel() { hostonly='' instmods =net/sunrpc =fs/nfs ipv6 nfs_acl nfs_layout_nfsv41_files } cmdline() { local nfs_device local nfs_options local nfs_root local nfs_address local lookup local ifname ### nfsroot= ### nfs_device=$(findmnt -t nfs4 -n -o SOURCE /) if [ -n "$nfs_device" ];then nfs_root="root=nfs4:$nfs_device" else nfs_device=$(findmnt -t nfs -n -o SOURCE /) [ -z "$nfs_device" ] && return nfs_root="root=nfs:$nfs_device" fi nfs_options=$(findmnt -t nfs4,nfs -n -o OPTIONS /) [ -n "$nfs_options" ] && nfs_root="$nfs_root:$nfs_options" echo "$nfs_root" ### ip= ### if [[ $nfs_device = [0-9]*\.[0-9]*\.[0-9]*.[0-9]* ]] || [[ $nfs_device = \[.*\] ]]; then nfs_address="${nfs_device%%:*}" else lookup=$(host "${nfs_device%%:*}"| grep " address " | head -n1) nfs_address=${lookup##* } fi ifname=$(ip -o route get to $nfs_address | sed -n 's/.*dev \([^ ]*\).*/\1/p') if [ -d /sys/class/net/$ifname/bonding ]; then dinfo "Found bonded interface '${ifname}'. Make sure to provide an appropriate 'bond=' cmdline." return elif [ -e /sys/class/net/$ifname/address ] ; then ifmac=$(cat /sys/class/net/$ifname/address) printf 'ifname=%s:%s ' ${ifname} ${ifmac} fi printf 'ip=%s:static\n' ${ifname} } # called by dracut install() { local _i local _nsslibs inst_multiple -o portmap rpcbind rpc.statd mount.nfs \ mount.nfs4 umount rpc.idmapd sed /etc/netconfig chmod "$tmpfilesdir/rpcbind.conf" inst_multiple /etc/services /etc/nsswitch.conf /etc/rpc /etc/protocols /etc/idmapd.conf if [[ $hostonly_cmdline == "yes" ]]; then local _netconf="$(cmdline)" [[ $_netconf ]] && printf "%s\n" "$_netconf" >> "${initdir}/etc/cmdline.d/95nfs.conf" fi if [ -f /lib/modprobe.d/nfs.conf ]; then inst_multiple /lib/modprobe.d/nfs.conf else [ -d $initdir/etc/modprobe.d/ ] || mkdir $initdir/etc/modprobe.d echo "alias nfs4 nfs" > $initdir/etc/modprobe.d/nfs.conf fi inst_libdir_file 'libnfsidmap_nsswitch.so*' 'libnfsidmap/*.so' 'libnfsidmap*.so*' _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|') _nsslibs=${_nsslibs#|} _nsslibs=${_nsslibs%|} inst_libdir_file -n "$_nsslibs" 'libnss_*.so*' inst_hook cmdline 90 "$moddir/parse-nfsroot.sh" inst_hook pre-udev 99 "$moddir/nfs-start-rpc.sh" inst_hook cleanup 99 "$moddir/nfsroot-cleanup.sh" inst "$moddir/nfsroot.sh" "/sbin/nfsroot" inst "$moddir/nfs-lib.sh" "/lib/nfs-lib.sh" mkdir -m 0755 -p "$initdir/var/lib/nfs/rpc_pipefs" mkdir -m 0770 -p "$initdir/var/lib/rpcbind" [ -d "$dracutsysrootdir/var/lib/nfs/statd/sm" ] && \ mkdir -m 0700 -p "$initdir/var/lib/nfs/statd" && \ mkdir -m 0755 -p "$initdir/var/lib/nfs/statd/sm" && \ chown -R rpcuser:rpcuser "$initdir/var/lib/nfs/statd" [ -d "$dracutsysrootdir/var/lib/nfs/sm" ] && \ mkdir -m 0755 -p "$initdir/var/lib/nfs/sm" && chown -R rpcuser:rpcuser "$initdir/var/lib/nfs/sm" # Rather than copy the passwd file in, just set a user for rpcbind # We'll save the state and restart the daemon from the root anyway grep -E '^nfsnobody:|^rpc:|^rpcuser:' /etc/passwd >> "$initdir/etc/passwd" grep -E '^nogroup:|^rpc:|^nobody:' /etc/group >> "$initdir/etc/group" # rpc user needs to be able to write to this directory to save the warmstart # file chmod 770 "$initdir/var/lib/rpcbind" grep -q '^rpc:' /etc/passwd \ && grep -q '^rpc:' /etc/group dracut_need_initqueue } modules.d/90crypt/crypt-lib.sh 0000755 00000016743 15053306611 0012227 0 ustar 00 #!/bin/sh command -v getarg >/dev/null || . /lib/dracut-lib.sh # check if the crypttab contains an entry for a LUKS UUID crypttab_contains() { local luks="$1" local dev="$2" local l d rest if [ -f /etc/crypttab ]; then while read l d rest || [ -n "$l" ]; do strstr "${l##luks-}" "${luks##luks-}" && return 0 strstr "$d" "${luks##luks-}" && return 0 if [ -n "$dev" ]; then for _dev in $(devnames $d); do [ "$dev" -ef "$_dev" ] && return 0 done fi if [ -e /etc/block_uuid.map ]; then # search for line starting with $d _line=$(sed -n "\,^$d .*$,{p}" /etc/block_uuid.map) [ -z "$_line" ] && continue # get second column with uuid _uuid="$(echo $_line | sed 's,^.* \(.*$\),\1,')" strstr "$_uuid" "${luks##luks-}" && return 0 fi done < /etc/crypttab fi return 1 } # ask_for_password # # Wraps around plymouth ask-for-password and adds fallback to tty password ask # if plymouth is not present. # # --cmd command # Command to execute. Required. # --prompt prompt # Password prompt. Note that function already adds ':' at the end. # Recommended. # --tries n # How many times repeat command on its failure. Default is 3. # --ply-[cmd|prompt|tries] # Command/prompt/tries specific for plymouth password ask only. # --tty-[cmd|prompt|tries] # Command/prompt/tries specific for tty password ask only. # --tty-echo-off # Turn off input echo before tty command is executed and turn on after. # It's useful when password is read from stdin. ask_for_password() { local cmd; local prompt; local tries=3 local ply_cmd; local ply_prompt; local ply_tries=3 local tty_cmd; local tty_prompt; local tty_tries=3 local ret while [ $# -gt 0 ]; do case "$1" in --cmd) ply_cmd="$2"; tty_cmd="$2"; shift;; --ply-cmd) ply_cmd="$2"; shift;; --tty-cmd) tty_cmd="$2"; shift;; --prompt) ply_prompt="$2"; tty_prompt="$2"; shift;; --ply-prompt) ply_prompt="$2"; shift;; --tty-prompt) tty_prompt="$2"; shift;; --tries) ply_tries="$2"; tty_tries="$2"; shift;; --ply-tries) ply_tries="$2"; shift;; --tty-tries) tty_tries="$2"; shift;; --tty-echo-off) tty_echo_off=yes;; esac shift done { flock -s 9; # Prompt for password with plymouth, if installed and running. if type plymouth >/dev/null 2>&1 && plymouth --ping 2>/dev/null; then plymouth ask-for-password \ --prompt "$ply_prompt" --number-of-tries=$ply_tries \ --command="$ply_cmd" ret=$? else if [ "$tty_echo_off" = yes ]; then stty_orig="$(stty -g)" stty -echo fi local i=1 while [ $i -le $tty_tries ]; do [ -n "$tty_prompt" ] && \ printf "$tty_prompt [$i/$tty_tries]:" >&2 eval "$tty_cmd" && ret=0 && break ret=$? i=$(($i+1)) [ -n "$tty_prompt" ] && printf '\n' >&2 done [ "$tty_echo_off" = yes ] && stty $stty_orig fi } 9>/.console_lock [ $ret -ne 0 ] && echo "Wrong password" >&2 return $ret } # Try to mount specified device (by path, by UUID or by label) and check # the path with 'test'. # # example: # test_dev -f LABEL="nice label" /some/file1 test_dev() { local test_op=$1; local dev="$2"; local f="$3" local ret=1; local mount_point=$(mkuniqdir /mnt testdev) local path [ -n "$dev" -a -n "$*" ] || return 1 [ -d "$mount_point" ] || die 'Mount point does not exist!' if mount -r "$dev" "$mount_point" >/dev/null 2>&1; then test $test_op "${mount_point}/${f}" ret=$? umount "$mount_point" fi rmdir "$mount_point" return $ret } # match_dev devpattern dev # # Returns true if 'dev' matches 'devpattern'. Both 'devpattern' and 'dev' are # expanded to kernel names and then compared. If name of 'dev' is on list of # names of devices matching 'devpattern', the test is positive. 'dev' and # 'devpattern' may be anything which function 'devnames' recognizes. # # If 'devpattern' is empty or '*' then function just returns true. # # Example: # match_dev UUID=123 /dev/dm-1 # Returns true if /dev/dm-1 UUID starts with "123". match_dev() { [ -z "$1" -o "$1" = '*' ] && return 0 local devlist; local dev devlist="$(devnames "$1")" || return 255 dev="$(devnames "$2")" || return 255 strstr " $devlist " " $dev " } # getkey keysfile for_dev # # Reads file <keysfile> produced by probe-keydev and looks for first line to # which device <for_dev> matches. The successful result is printed in format # "<keydev>:<keypath>". When nothing found, just false is returned. # # Example: # getkey /tmp/luks.keys /dev/sdb1 # May print: # /dev/sdc1:/keys/some.key getkey() { local keys_file="$1"; local for_dev="$2" local luks_dev; local key_dev; local key_path [ -z "$keys_file" -o -z "$for_dev" ] && die 'getkey: wrong usage!' [ -f "$keys_file" ] || return 1 local IFS=: while read luks_dev key_dev key_path || [ -n "$luks_dev" ]; do if match_dev "$luks_dev" "$for_dev"; then echo "${key_dev}:${key_path}" return 0 fi done < "$keys_file" return 1 } # readkey keypath keydev device # # Mounts <keydev>, reads key from file <keypath>, optionally processes it (e.g. # if encrypted with GPG) and prints to standard output which is supposed to be # read by cryptsetup. <device> is just passed to helper function for # informational purpose. readkey() { local keypath="$1" local keydev="$2" local device="$3" # No mounting needed if the keyfile resides inside the initrd if [ "/" == "$keydev" ]; then local mntp=/ else # This creates a unique single mountpoint for *, or several for explicitly # given LUKS devices. It accomplishes unlocking multiple LUKS devices with # a single password entry. local mntp="/mnt/$(str_replace "keydev-$keydev-$keypath" '/' '-')" if [ ! -d "$mntp" ]; then mkdir "$mntp" mount -r "$keydev" "$mntp" || die 'Mounting rem. dev. failed!' fi fi case "${keypath##*.}" in gpg) if [ -f /lib/dracut-crypt-gpg-lib.sh ]; then . /lib/dracut-crypt-gpg-lib.sh gpg_decrypt "$mntp" "$keypath" "$keydev" "$device" else die "No GPG support to decrypt '$keypath' on '$keydev'." fi ;; img) if [ -f /lib/dracut-crypt-loop-lib.sh ]; then . /lib/dracut-crypt-loop-lib.sh loop_decrypt "$mntp" "$keypath" "$keydev" "$device" printf "%s\n" "umount \"$mntp\"; rmdir \"$mntp\";" > ${hookdir}/cleanup/"crypt-loop-cleanup-99-${mntp##*/}".sh return 0 else die "No loop file support to decrypt '$keypath' on '$keydev'." fi ;; *) cat "$mntp/$keypath" ;; esac # No unmounting if the keyfile resides inside the initrd if [ "/" != "$keydev" ]; then # General unmounting mechanism, modules doing custom cleanup should return earlier # and install a pre-pivot cleanup hook umount "$mntp" rmdir "$mntp" fi } modules.d/90crypt/cryptroot-ask.sh 0000755 00000011406 15053306611 0013132 0 ustar 00 #!/bin/sh PATH=/usr/sbin:/usr/bin:/sbin:/bin NEWROOT=${NEWROOT:-"/sysroot"} # do not ask, if we already have root [ -f $NEWROOT/proc ] && exit 0 . /lib/dracut-lib.sh # if device name is /dev/dm-X, convert to /dev/mapper/name if [ "${1##/dev/dm-}" != "$1" ]; then device="/dev/mapper/$(dmsetup info -c --noheadings -o name "$1")" else device="$1" fi # default luksname - luks-UUID luksname=$2 # number of tries numtries=${3:-10} # TODO: improve to support what cmdline does if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; then while read name dev luksfile luksoptions || [ -n "$name" ]; do # ignore blank lines and comments if [ -z "$name" -o "${name#\#}" != "$name" ]; then continue fi # PARTUUID used in crypttab if [ "${dev%%=*}" = "PARTUUID" ]; then if [ "luks-${dev##PARTUUID=}" = "$luksname" ]; then luksname="$name" break fi # UUID used in crypttab elif [ "${dev%%=*}" = "UUID" ]; then if [ "luks-${dev##UUID=}" = "$luksname" ]; then luksname="$name" break fi # ID used in crypttab elif [ "${dev%%=*}" = "ID" ]; then if [ "luks-${dev##ID=}" = "$luksname" ]; then luksname="$name" break fi # path used in crypttab else cdev=$(readlink -f $dev) mdev=$(readlink -f $device) if [ "$cdev" = "$mdev" ]; then luksname="$name" break fi fi done < /etc/crypttab unset name dev fi # check if destination already exists [ -b /dev/mapper/$luksname ] && exit 0 # we already asked for this device asked_file=/tmp/cryptroot-asked-$luksname [ -f $asked_file ] && exit 0 # load dm_crypt if it is not already loaded [ -d /sys/module/dm_crypt ] || modprobe dm_crypt . /lib/dracut-crypt-lib.sh # # Open LUKS device # info "luksOpen $device $luksname $luksfile $luksoptions" OLD_IFS="$IFS" IFS=, set -- $luksoptions IFS="$OLD_IFS" while [ $# -gt 0 ]; do case $1 in noauto) # skip this exit 0 ;; swap) # skip this exit 0 ;; tmp) # skip this exit 0 ;; allow-discards) allowdiscards="--allow-discards" ;; header=*) cryptsetupopts="${cryptsetupopts} --${1}" ;; esac shift done # parse for allow-discards if strstr "$(cryptsetup --help)" "allow-discards"; then if discarduuids=$(getargs "rd.luks.allow-discards"); then discarduuids=$(str_replace "$discarduuids" 'luks-' '') if strstr " $discarduuids " " ${luksdev##luks-}"; then allowdiscards="--allow-discards" fi elif getargbool 0 rd.luks.allow-discards; then allowdiscards="--allow-discards" fi fi if strstr "$(cryptsetup --help)" "allow-discards"; then cryptsetupopts="$cryptsetupopts $allowdiscards" fi unset allowdiscards # fallback to passphrase ask_passphrase=1 if [ -n "$luksfile" -a "$luksfile" != "none" -a -e "$luksfile" ]; then if cryptsetup --key-file "$luksfile" $cryptsetupopts luksOpen "$device" "$luksname"; then ask_passphrase=0 fi else while [ -n "$(getarg rd.luks.key)" ]; do if tmp=$(getkey /tmp/luks.keys $device); then keydev="${tmp%%:*}" keypath="${tmp#*:}" else if [ $numtries -eq 0 ]; then warn "No key found for $device. Fallback to passphrase mode." break fi sleep 1 info "No key found for $device. Will try $numtries time(s) more later." initqueue --unique --onetime --settled \ --name cryptroot-ask-$luksname \ $(command -v cryptroot-ask) "$device" "$luksname" "$(($numtries-1))" exit 0 fi unset tmp info "Using '$keypath' on '$keydev'" readkey "$keypath" "$keydev" "$device" \ | cryptsetup -d - $cryptsetupopts luksOpen "$device" "$luksname" unset keypath keydev ask_passphrase=0 break done fi if [ $ask_passphrase -ne 0 ]; then luks_open="$(command -v cryptsetup) $cryptsetupopts luksOpen" _timeout=$(getargs "rd.luks.timeout") _timeout=${_timeout:-0} ask_for_password --ply-tries 5 \ --ply-cmd "$luks_open -T1 $device $luksname" \ --ply-prompt "Password ($device)" \ --tty-tries 1 \ --tty-cmd "$luks_open -T5 -t $_timeout $device $luksname" unset luks_open unset _timeout fi unset device luksname luksfile # mark device as asked >> $asked_file need_shutdown udevsettle exit 0 modules.d/90crypt/probe-keydev.sh 0000755 00000000576 15053306611 0012713 0 ustar 00 #!/bin/sh . /lib/dracut-crypt-lib.sh real_keydev="$1"; keypath="$2"; luksdev="$3" [ -z "$real_keydev" -o -z "$keypath" ] && die 'probe-keydev: wrong usage!' [ -z "$luksdev" ] && luksdev='*' info "Probing $real_keydev for $keypath..." test_dev -f "$real_keydev" "$keypath" || exit 1 info "Found $keypath on $real_keydev" echo "$luksdev:$real_keydev:$keypath" >> /tmp/luks.keys modules.d/90crypt/parse-crypt.sh 0000755 00000015741 15053306611 0012570 0 ustar 00 #!/bin/sh type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh _cryptgetargsname() { debug_off local _o _found _key unset _o unset _found CMDLINE=$(getcmdline) _key="$1" set -- for _o in $CMDLINE; do if [ "$_o" = "$_key" ]; then _found=1; elif [ "${_o%=*}" = "${_key%=}" ]; then [ -n "${_o%=*}" ] && set -- "$@" "${_o#*=}"; _found=1; fi done if [ -n "$_found" ]; then [ $# -gt 0 ] && printf '%s' "$*" return 0 fi return 1; } if ! getargbool 1 rd.luks -d -n rd_NO_LUKS; then info "rd.luks=0: removing cryptoluks activation" rm -f -- /etc/udev/rules.d/70-luks.rules else { echo 'SUBSYSTEM!="block", GOTO="luks_end"' echo 'ACTION!="add|change", GOTO="luks_end"' } > /etc/udev/rules.d/70-luks.rules.new PARTUUID=$(getargs rd.luks.partuuid -d rd_LUKS_PARTUUID) SERIAL=$(getargs rd.luks.serial -d rd_LUKS_SERIAL) LUKS=$(getargs rd.luks.uuid -d rd_LUKS_UUID) tout=$(getarg rd.luks.key.tout) if [ -e /etc/crypttab ]; then while read -r _ _dev _ || [ -n "$_dev" ]; do set_systemd_timeout_for_dev "$_dev" done < /etc/crypttab fi if [ -n "$PARTUUID" ]; then for uuid in $PARTUUID; do uuid=${uuid##luks-} if luksname=$(_cryptgetargsname "rd.luks.name=$uuid="); then luksname="${luksname#$uuid=}" else luksname="luks-$uuid" fi if [ -z "$DRACUT_SYSTEMD" ]; then { printf -- 'ENV{ID_PART_ENTRY_UUID}=="*%s*", ' "$uuid" printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)" printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)" printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout" } >> /etc/udev/rules.d/70-luks.rules.new else luksname=$(dev_unit_name "$luksname") luksname="$(str_replace "$luksname" '\' '\\')" if ! crypttab_contains "$uuid"; then { printf -- 'ENV{ID_PART_ENTRY_UUID}=="*%s*", ' "$uuid" printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)" printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)" printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname" } >> /etc/udev/rules.d/70-luks.rules.new fi fi done elif [ -n "$SERIAL" ]; then for serialid in $SERIAL; do serialid=${serialid##luks-} if luksname=$(_cryptgetargsname "rd.luks.name=$serialid="); then luksname="${luksname#$serialid=}" else luksname="luks-$serialid" fi if [ -z "$DRACUT_SYSTEMD" ]; then { printf -- 'ENV{ID_SERIAL_SHORT}=="*%s*", ' "$serialid" printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)" printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)" printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout" } >> /etc/udev/rules.d/70-luks.rules.new else luksname=$(dev_unit_name "$luksname") luksname="$(str_replace "$luksname" '\' '\\')" if ! crypttab_contains "$serialid"; then { printf -- 'ENV{ID_SERIAL_SHORT}=="*%s*", ' "$serialid" printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)" printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)" printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname" } >> /etc/udev/rules.d/70-luks.rules.new fi fi done elif [ -n "$LUKS" ]; then for luksid in $LUKS; do luksid=${luksid##luks-} if luksname=$(_cryptgetargsname "rd.luks.name=$luksid="); then luksname="${luksname#$luksid=}" else luksname="luks-$luksid" fi if [ -z "$DRACUT_SYSTEMD" ]; then { printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", ' printf -- 'ENV{ID_FS_UUID}=="*%s*", ' "$luksid" printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)" printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)" printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout" } >> /etc/udev/rules.d/70-luks.rules.new else luksname=$(dev_unit_name "$luksname") luksname="$(str_replace "$luksname" '\' '\\')" if ! crypttab_contains "$luksid"; then { printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", ' printf -- 'ENV{ID_FS_UUID}=="*%s*", ' "$luksid" printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)" printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)" printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname" } >> /etc/udev/rules.d/70-luks.rules.new fi fi uuid=$luksid while [ "$uuid" != "${uuid#*-}" ]; do uuid=${uuid%%-*}${uuid#*-}; done printf -- '[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*%s*-* ] || exit 1\n' $uuid \ >> "$hookdir/initqueue/finished/90-crypt.sh" { printf -- '[ -e /dev/disk/by-uuid/*%s* ] || ' $luksid printf -- 'warn "crypto LUKS UUID "%s" not found"\n' $luksid } >> "$hookdir/emergency/90-crypt.sh" done elif getargbool 0 rd.auto; then if [ -z "$DRACUT_SYSTEMD" ]; then { printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' "$(command -v initqueue)" printf -- '--unique --settled --onetime --name cryptroot-ask-%%k ' printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' "$(command -v cryptroot-ask)" "$tout" } >> /etc/udev/rules.d/70-luks.rules.new else { printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' "$(command -v initqueue)" printf -- '--unique --settled --onetime --name crypt-run-generator-%%k ' printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID}"\n' "$(command -v crypt-run-generator)" } >> /etc/udev/rules.d/70-luks.rules.new fi fi echo 'LABEL="luks_end"' >> /etc/udev/rules.d/70-luks.rules.new mv /etc/udev/rules.d/70-luks.rules.new /etc/udev/rules.d/70-luks.rules fi modules.d/90crypt/parse-keydev.sh 0000755 00000002541 15053306611 0012710 0 ustar 00 #!/bin/sh if getargbool 1 rd.luks -n rd_NO_LUKS && \ [ -n "$(getarg rd.luks.key)" ]; then exec 7>/etc/udev/rules.d/65-luks-keydev.rules echo 'SUBSYSTEM!="block", GOTO="luks_keydev_end"' >&7 echo 'ACTION!="add|change", GOTO="luks_keydev_end"' >&7 for arg in $(getargs rd.luks.key); do unset keypath keydev luksdev splitsep : "$arg" keypath keydev luksdev info "rd.luks.key: keypath='$keypath' keydev='$keydev' luksdev='$luksdev'" if [ -z "$keypath" ]; then warn 'keypath required!' continue fi # A keydev of '/' is treated as the initrd itself if [ "/" == "$keydev" ]; then [ -z "$luksdev" ] && luksdev='*' echo "$luksdev:$keydev:$keypath" >> /tmp/luks.keys continue elif [ -n "$keydev" ]; then udevmatch "$keydev" >&7 || { warn 'keydev incorrect!' continue } printf ', ' >&7 fi { printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue) printf -- '--name probe-keydev-%%k ' printf -- '%s /dev/%%k %s %s"\n' \ $(command -v probe-keydev) "${keypath}" "${luksdev}" } >&7 done unset arg keypath keydev luksdev echo 'LABEL="luks_keydev_end"' >&7 exec 7>&- fi modules.d/90crypt/crypt-run-generator.sh 0000755 00000001402 15053306611 0014233 0 ustar 00 #!/bin/sh . /lib/dracut-lib.sh type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh dev=$1 luks=$2 crypttab_contains "$luks" "$dev" && exit 0 allowdiscards="-" # parse for allow-discards if strstr "$(cryptsetup --help)" "allow-discards"; then if discarduuids=$(getargs "rd.luks.allow-discards"); then discarduuids=$(str_replace "$discarduuids" 'luks-' '') if strstr " $discarduuids " " ${luks##luks-}"; then allowdiscards="discard" fi elif getargbool 0 rd.luks.allow-discards; then allowdiscards="discard" fi fi echo "$luks $dev - timeout=0,$allowdiscards" >> /etc/crypttab if command -v systemctl >/dev/null; then systemctl daemon-reload systemctl start cryptsetup.target fi exit 0 modules.d/90crypt/crypt-cleanup.sh 0000755 00000000672 15053306611 0013102 0 ustar 00 #!/bin/sh # close everything which is not busy rm -f -- /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1 if ! getarg rd.luks.uuid -d rd_LUKS_UUID >/dev/null 2>&1 && getargbool 1 rd.luks -d -n rd_NO_LUKS >/dev/null 2>&1; then while true; do local do_break="y" for i in /dev/mapper/luks-*; do cryptsetup luksClose $i >/dev/null 2>&1 && do_break=n done [ "$do_break" = "y" ] && break done fi modules.d/90crypt/module-setup.sh 0000755 00000011154 15053306611 0012734 0 ustar 00 #!/bin/bash # called by dracut check() { local _rootdev # if cryptsetup is not installed, then we cannot support encrypted devices. require_any_binary $systemdutildir/systemd-cryptsetup cryptsetup || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ $fs = "crypto_LUKS" ]] && return 0 done return 255 } return 0 } # called by dracut depends() { echo dm rootfs-block return 0 } # called by dracut installkernel() { hostonly="" instmods drbg arch=$(arch) [[ $arch == x86_64 ]] && arch=x86 [[ $arch == s390x ]] && arch=s390 instmods dm_crypt =crypto =drivers/crypto =arch/$arch/crypto } # called by dracut cmdline() { local dev UUID for dev in "${!host_fs_types[@]}"; do [[ "${host_fs_types[$dev]}" != "crypto_LUKS" ]] && continue UUID=$( blkid -u crypto -o export $dev \ | while read line || [ -n "$line" ]; do [[ ${line#UUID} = $line ]] && continue printf "%s" "${line#UUID=}" break done ) [[ ${UUID} ]] || continue printf "%s" " rd.luks.uuid=luks-${UUID}" done } # called by dracut install() { if [[ $hostonly_cmdline == "yes" ]]; then local _cryptconf=$(cmdline) [[ $_cryptconf ]] && printf "%s\n" "$_cryptconf" >> "${initdir}/etc/cmdline.d/90crypt.conf" fi inst_hook cmdline 30 "$moddir/parse-crypt.sh" if ! dracut_module_included "systemd"; then inst_multiple cryptsetup rmdir readlink umount inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask inst_script "$moddir"/probe-keydev.sh /sbin/probe-keydev inst_hook cmdline 10 "$moddir/parse-keydev.sh" inst_hook cleanup 30 "$moddir/crypt-cleanup.sh" fi if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then # filter /etc/crypttab for the devices we need while read _mapper _dev _luksfile _luksoptions || [ -n "$_mapper" ]; do [[ $_mapper = \#* ]] && continue [[ $_dev ]] || continue [[ $_dev == PARTUUID=* ]] && \ _dev="/dev/disk/by-partuuid/${_dev#PARTUUID=}" [[ $_dev == UUID=* ]] && \ _dev="/dev/disk/by-uuid/${_dev#UUID=}" [[ $_dev == ID=* ]] && \ _dev="/dev/disk/by-id/${_dev#ID=}" echo "$_dev $(blkid $_dev -s UUID -o value)" >> "${initdir}/etc/block_uuid.map" # loop through the options to check for the force option luksoptions=${_luksoptions} OLD_IFS="${IFS}" IFS=, set -- ${luksoptions} IFS="${OLD_IFS}" while [ $# -gt 0 ]; do case $1 in force) forceentry="yes" break ;; esac shift done # include the entry regardless if [ "${forceentry}" = "yes" ]; then echo "$_mapper $_dev $_luksfile $_luksoptions" else for _hdev in "${!host_fs_types[@]}"; do [[ ${host_fs_types[$_hdev]} == "crypto_LUKS" ]] || continue if [[ $_hdev -ef $_dev ]] || [[ /dev/block/$_hdev -ef $_dev ]]; then echo "$_mapper $_dev $_luksfile $_luksoptions" break fi done fi done < /etc/crypttab > $initdir/etc/crypttab mark_hostonly /etc/crypttab fi inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh" if dracut_module_included "systemd"; then # the cryptsetup targets are already pulled in by 00systemd, but not # the enablement symlinks inst_multiple -o \ $systemdutildir/system-generators/systemd-cryptsetup-generator \ $systemdutildir/systemd-cryptsetup \ $systemdsystemunitdir/systemd-ask-password-console.path \ $systemdsystemunitdir/systemd-ask-password-console.service \ $systemdsystemunitdir/cryptsetup.target \ $systemdsystemunitdir/sysinit.target.wants/cryptsetup.target \ $systemdsystemunitdir/remote-cryptsetup.target \ $systemdsystemunitdir/initrd-root-device.target.wants/remote-cryptsetup.target \ systemd-ask-password systemd-tty-ask-password-agent inst_script "$moddir"/crypt-run-generator.sh /sbin/crypt-run-generator fi dracut_need_initqueue } modules.d/90qemu-net/module-setup.sh 0000755 00000001442 15053306611 0013325 0 ustar 00 #!/bin/bash # called by dracut check() { if [[ $hostonly ]] || [[ $mount_needs ]]; then if type -P systemd-detect-virt >/dev/null 2>&1; then vm=$(systemd-detect-virt --vm >/dev/null 2>&1) (($? != 0)) && return 255 [[ $vm = "qemu" ]] && return 0 [[ $vm = "kvm" ]] && return 0 [[ $vm = "bochs" ]] && return 0 fi for i in /sys/class/dmi/id/*_vendor; do [[ -f $i ]] || continue read vendor < $i [[ "$vendor" == "QEMU" ]] && return 0 [[ "$vendor" == "Bochs" ]] && return 0 done return 255 fi return 0 } # called by dracut installkernel() { # qemu specific modules hostonly='' instmods virtio_net e1000 8139cp pcnet32 e100 ne2k_pci } modules.d/30convertfs/convertfs.sh 0000755 00000013623 15053306611 0013167 0 ustar 00 #!/bin/bash ROOT="$1" if [[ ! -d "$ROOT" ]]; then echo "Usage: $0 <rootdir>" exit 1 fi if [[ "$ROOT" -ef / ]]; then echo "Can't convert the running system." echo "Please boot with 'rd.convertfs' on the kernel command line," echo "to update with the help of the initramfs," echo "or run this script from a rescue system." exit 1 fi while [[ "$ROOT" != "${ROOT%/}" ]]; do ROOT=${ROOT%/} done if [ ! -L $ROOT/var/run -a -e $ROOT/var/run ]; then echo "Converting /var/run to symlink" mv -f $ROOT/var/run $ROOT/var/run.runmove~ ln -sfn ../run $ROOT/var/run fi if [ ! -L $ROOT/var/lock -a -e $ROOT/var/lock ]; then echo "Converting /var/lock to symlink" mv -f $ROOT/var/lock $ROOT/var/lock.lockmove~ ln -sfn ../run/lock $ROOT/var/lock fi needconvert() { for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64"; do if [[ -e "$dir" ]]; then [[ -L "$dir" ]] || return 0 fi done return 1 } if ! [ -e "$ROOT/usr/bin" ]; then echo "$ROOT/usr/bin does not exist!" echo "Make sure, the kernel command line has enough information" echo "to mount /usr (man dracut.cmdline)" exit 1 fi if ! needconvert; then echo "Your system is already converted." exit 0 fi testfile="$ROOT/.usrmovecheck$$" rm -f -- "$testfile" > "$testfile" if [[ ! -e "$testfile" ]]; then echo "Cannot write to $ROOT/" exit 1 fi rm -f -- "$testfile" testfile="$ROOT/usr/.usrmovecheck$$" rm -f -- "$testfile" > "$testfile" if [[ ! -e "$testfile" ]]; then echo "Cannot write to $ROOT/usr/" exit 1 fi rm -f -- "$testfile" find_mount() { local dev mnt etc wanted_dev wanted_dev="$(readlink -e -q $1)" while read dev mnt etc || [ -n "$dev" ]; do [ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0 done < /proc/mounts return 1 } # usage: ismounted <mountpoint> # usage: ismounted /dev/<device> if command -v findmnt >/dev/null; then ismounted() { findmnt "$1" > /dev/null 2>&1 } else ismounted() { if [ -b "$1" ]; then find_mount "$1" > /dev/null && return 0 return 1 fi while read a m a || [ -n "$m" ]; do [ "$m" = "$1" ] && return 0 done < /proc/mounts return 1 } fi # clean up after ourselves no matter how we die. cleanup() { echo "Something failed. Move back to the original state" for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \ "$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \ "$ROOT/usr/lib64"; do [[ -d "${dir}.usrmove-new" ]] && rm -fr -- "${dir}.usrmove-new" if [[ -d "${dir}.usrmove-old" ]]; then mv "$dir" "${dir}.del~" mv "${dir}.usrmove-old" "$dir" rm -fr -- "${dir}.del~" fi done } trap 'ret=$?; [[ $ret -ne 0 ]] && cleanup;exit $ret;' EXIT trap 'exit 1;' SIGINT ismounted "$ROOT/usr" || CP_HARDLINK="-l" set -e # merge / and /usr in new dir in /usr for dir in bin sbin lib lib64; do rm -rf -- "$ROOT/usr/${dir}.usrmove-new" [[ -L "$ROOT/$dir" ]] && continue [[ -d "$ROOT/$dir" ]] || continue echo "Make a copy of \`$ROOT/usr/$dir'." [[ -d "$ROOT/usr/$dir" ]] \ && cp -ax -l "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-new" echo "Merge the copy with \`$ROOT/$dir'." [[ -d "$ROOT/usr/${dir}.usrmove-new" ]] \ || mkdir -p "$ROOT/usr/${dir}.usrmove-new" cp -axT $CP_HARDLINK --backup --suffix=.usrmove~ "$ROOT/$dir" "$ROOT/usr/${dir}.usrmove-new" echo "Clean up duplicates in \`$ROOT/usr/$dir'." # delete all symlinks that have been backed up find "$ROOT/usr/${dir}.usrmove-new" -type l -name '*.usrmove~' -delete || : # replace symlink with backed up binary find "$ROOT/usr/${dir}.usrmove-new" \ -name '*.usrmove~' \ -type f \ -exec bash -c 'p="{}";o=${p%%%%.usrmove~}; [[ -L "$o" ]] && mv -f "$p" "$o"' ';' || : done # switch over merged dirs in /usr for dir in bin sbin lib lib64; do [[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue echo "Switch to new \`$ROOT/usr/$dir'." rm -fr -- "$ROOT/usr/${dir}.usrmove-old" mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old" mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir" done # replace dirs in / with links to /usr for dir in bin sbin lib lib64; do [[ -L "$ROOT/$dir" ]] && continue [[ -d "$ROOT/$dir" ]] || continue echo "Create \`$ROOT/$dir' symlink." rm -fr -- "$ROOT/${dir}.usrmove-old" || : mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old" ln -sfn usr/$dir "$ROOT/$dir" done echo "Clean up backup files." # everything seems to work; cleanup for dir in bin sbin lib lib64; do # if we get killed in the middle of "rm -rf", ensure not to leave # an incomplete directory, which is moved back by cleanup() [[ -d "$ROOT/usr/${dir}.usrmove-old" ]] \ && mv "$ROOT/usr/${dir}.usrmove-old" "$ROOT/usr/${dir}.usrmove-old~" [[ -d "$ROOT/${dir}.usrmove-old" ]] \ && mv "$ROOT/${dir}.usrmove-old" "$ROOT/${dir}.usrmove-old~" done for dir in bin sbin lib lib64; do [[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \ && rm -rf -- "$ROOT/usr/${dir}.usrmove-old~" || : [[ -d "$ROOT/${dir}.usrmove-old~" ]] \ && rm -rf -- "$ROOT/${dir}.usrmove-old~" || : done for dir in lib lib64; do [[ -d "$ROOT/$dir" ]] || continue for lib in "$ROOT"/usr/${dir}/lib*.so*.usrmove~; do [[ -f $lib ]] || continue mv $lib ${lib/.so/_so} done done set +e echo "Run ldconfig." ldconfig -r "$ROOT" . $ROOT/etc/selinux/config if [ -n "$(command -v setfiles)" ] && [ "$SELINUX" != "disabled" ] && [ -f /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts ]; then echo "Fixing SELinux labels" setfiles -r $ROOT -p /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts $ROOT/sbin $ROOT/bin $ROOT/lib $ROOT/lib64 $ROOT/usr/lib $ROOT/usr/lib64 $ROOT/etc/ld.so.cache $ROOT/var/cache/ldconfig || : fi echo "Done." exit 0 modules.d/30convertfs/do-convertfs.sh 0000755 00000000302 15053306611 0013555 0 ustar 00 #!/bin/bash if getargbool 0 rd.convertfs; then if getargbool 0 rd.debug; then bash -x convertfs "$NEWROOT" 2>&1 | vinfo else convertfs "$NEWROOT" 2>&1 | vinfo fi fi modules.d/30convertfs/module-setup.sh 0000755 00000000520 15053306611 0013571 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $mount_needs ]] && return 1 return 255 } # called by dracut depends() { return 0 } # called by dracut install() { inst_multiple bash find ldconfig mv rm cp ln inst_hook pre-pivot 99 "$moddir/do-convertfs.sh" inst_script "$moddir/convertfs.sh" /usr/bin/convertfs } modules.d/99microcode_ctl-fw_dir_override/module-setup.sh 0000755 00000010022 15053306611 0017552 0 ustar 00 #!/bin/bash # Hack in additional firmware directories for supported caveats. # # SPDX-License-Identifier: CC0-1.0 check() { return 0 } install() { local FW_DIR=/lib/firmware local DATA_DIR=/usr/share/microcode_ctl/ucode_with_caveats local CFG_DIR="/etc/microcode_ctl/ucode_with_caveats" local check_caveats=/usr/libexec/microcode_ctl/check_caveats local fw_path_para=$(< /sys/module/firmware_class/parameters/path) local verbose_opt local cc_out local path local ignored local do_skip_host_only local p verbose_opt= [ 4 -gt "$stdloglvl" ] || verbose_opt="-v" # HACK: we override external fw_dir variable in order to get # an additional ucode based on the kernel version. dinfo " microcode_ctl module: mangling fw_dir" [ -z "$fw_dir_l" ] || { dinfo " microcode_ctl: avoid touching fw_dir as" \ "it has been changed (fw_dir_l is '$fw_dir_l')" return 0 } # Reset fw_dir to avoid inclusion of kernel-version-specific directories # populated with microcode for the late load, only in case it is set # to the default value to avoid meddling with user-enforced changes. # The second variant has been introduced in dracut-057~5. [ \( "x$fw_dir" != \ "x/lib/firmware/updates /lib/firmware /lib/firmware/$kernel" \) -a \ \( "x$fw_dir" != \ "x${fw_path_para:+$fw_path_para }/lib/firmware/updates/$kernel /lib/firmware/updates /lib/firmware/$kernel /lib/firmware" \) ] || { fw_dir="/lib/firmware/updates /lib/firmware" dinfo " microcode_ctl: reset fw_dir to \"${fw_dir}\"" } fw_dir_add="" while read -d $'\n' -r i; do dinfo " microcode_ctl: processing data directory " \ "\"$DATA_DIR/$i\"..." if [ "x" != "x$hostonly" ]; then do_skip_host_only=0 local sho_overrides=" $CFG_DIR/skip-host-only-check $CFG_DIR/skip-host-only-check-$i $FW_DIR/$kernel/skip-host-only-check $FW_DIR/$kernel/skip-host-only-check-$i" for p in $(echo "$sho_overrides"); do [ -e "$p" ] || continue do_skip_host_only=1 dinfo " microcode_ctl: $i; skipping" \ "Host-Only check, since \"$p\" exists." break done else do_skip_host_only=1 fi match_model_opt="" [ 1 = "$do_skip_host_only" ] || match_model_opt="-m" if ! cc_out=$($check_caveats -e -k "$kernel" -c "$i" \ $verbose_opt $match_model_opt) then dinfo " microcode_ctl: kernel version \"$kernel\"" \ "failed early load check for \"$i\", skipping" continue fi path=$(printf "%s" "$cc_out" | sed -n 's/^paths //p') [ -n "$path" ] || { ignored=$(printf "%s" "$cc_out" | \ sed -n 's/^skip_cfgs //p') if [ -n "$ignored" ]; then dinfo " microcode_ctl: configuration" \ "\"$i\" is ignored" else dinfo " microcode_ctl: no microcode paths" \ "are associated with \"$i\", skipping" fi continue } dinfo " microcode_ctl: $i: caveats check for kernel" \ "version \"$kernel\" passed, adding" \ "\"$DATA_DIR/$i\" to fw_dir variable" if [ 0 -eq "$do_skip_host_only" ]; then fw_dir_add="$DATA_DIR/$i " else fw_dir_add="$DATA_DIR/$i $fw_dir_add" fi # The list of directories is reverse-sorted in order to preserve the # "last wins" policy in case of presence of multiple microcode # revisions. # # In case of hostonly == 0, all microcode revisions will be included, # but since the microcode search is done with the "first wins" policy # by the (early) microcode loading code, the correct microcode revision # still has to be picked. # # Note that dracut without patch [1] puts only the last directory # in the early cpio; we try to address this by putting only the last # matching caveat in the search path, but that workaround works only # for host-only mode; non-host-only mode early cpio generation is still # broken without that patch. # # [1] https://github.com/dracutdevs/dracut/commit/c44d2252bb4b done <<-EOF $(find "$DATA_DIR" -maxdepth 1 -mindepth 1 -type d -printf "%f\n" \ | LC_ALL=C sort) EOF fw_dir="${fw_dir_add}${fw_dir}" dinfo " microcode_ctl: final fw_dir: \"${fw_dir}\"" } modules.d/90qemu/module-setup.sh 0000755 00000002015 15053306611 0012536 0 ustar 00 #!/bin/bash # called by dracut check() { if [[ $hostonly ]] || [[ $mount_needs ]]; then if type -P systemd-detect-virt >/dev/null 2>&1; then vm=$(systemd-detect-virt --vm 2>/dev/null) (($? != 0)) && return 255 [[ $vm = "qemu" ]] && return 0 [[ $vm = "kvm" ]] && return 0 [[ $vm = "bochs" ]] && return 0 fi for i in /sys/class/dmi/id/*_vendor; do [[ -f $i ]] || continue read vendor < $i [[ "$vendor" == "QEMU" ]] && return 0 [[ "$vendor" == "Red Hat" ]] && return 0 [[ "$vendor" == "Bochs" ]] && return 0 done return 255 fi return 0 } # called by dracut installkernel() { # qemu specific modules hostonly='' instmods \ ata_piix ata_generic pata_acpi cdrom sr_mod ahci \ virtio_blk virtio virtio_ring virtio_pci \ virtio_scsi virtio_console virtio_rng virtio_mem \ spapr-vscsi \ qemu_fw_cfg } modules.d/90kernel-modules-extra/module-setup.sh 0000755 00000011755 15053306611 0015651 0 ustar 00 #!/bin/bash # called by dracut # # Parses depmod configuration and calls instmods for out-of-tree kernel # modules found. Specifically, kernel modules inside directories that # come from the following places are included (if these kernel modules # are present in modules.dep): # - "search" configuration option; # - "override" configuration option (matching an exact file name constructed # by concatenating the provided directory and the kernel module name); # - "external" configuration option (if "external" is a part of "search" # configuration). # (See depmod.d(5) for details.) # # This module has the following variables available for configuration: # - "depmod_modules_dep" - Path to the modules.dep file # ("$srcmods/modules.dep" by default); # - "depmod_module_dir" - Directory containing kernel modules ("$srcmods" # by default); # - "depmod_configs" - array of depmod configuration paths to parse # (as supplied to depmod -C, ("/run/depmod.d/" # "/etc/depmod.d/" "/lib/depmod.d/") by default). installkernel() { : "${depmod_modules_dep:=$srcmods/modules.dep}" : "${depmod_module_dir:=$srcmods}" [[ -f "${depmod_modules_dep}" ]] || return 0 # Message printers with custom prefix local mod_name="kernel-modules-extra" prinfo() { dinfo " ${mod_name}: $*"; } prdebug() { ddebug " ${mod_name}: $*"; } # Escape a string for usage as a part of extended regular expression. # $1 - string to escape re_escape() { printf "%s" "$1" | sed 's/\([.+?^$\/\\|()\[]\|\]\)/\\\0/' } local OLDIFS local cfg local cfgs=() local search_list="" local overrides=() local external_dirs=() local e f ## Gathering and sorting configuration file list [ -n "${depmod_configs[@]-}" ] \ || depmod_configs=(/run/depmod.d/ /etc/depmod.d/ /lib/depmod.d/) for cfg in "${depmod_configs[@]}"; do [ -e "$cfg" ] || { prdebug "configuration source \"$cfg\" does not exist" continue } # '/' is used as a separator between configuration name and # configuration path if [ -d "$cfg" ]; then for f in "$cfg/"*; do [[ -e "$f" && ! -d "$f" ]] || { prdebug "configuration source" \ "\"$cfg\" is ignored" \ "(directory or doesn't exist)" continue } cfgs+=("$(basename "$f")/$f") done else cfgs+=("$(basename "$cfg")/$cfg") fi done OLDIFS="$IFS" IFS=$'\n' LANG=C cfgs=($(printf '%s\n' "${cfgs[@]}" \ | sort -u -k1,1 -t '/' | cut -f 2- -d '/')) IFS="$OLDIFS" ## Parse configurations for cfg in "${cfgs[@]}"; do prdebug "parsing configuration file \"$cfg\"" local k v mod kverpat path while read -r k v; do case "$k" in search) search_list="$search_list $v" prdebug "$cfg: added \"$v\" to the list of" \ "search directories" ;; override) # module_name kver_pattern dir read -r mod kverpat path <<<"$v" if [[ ! "$mod" || ! "$kverpat" || ! "$path" ]] then prinfo "$cfg: ignoring incorrect" \ "override option: \"$k $v\"" continue fi if [[ '*' = "$kverpat" \ || "$kernel" =~ "$kverpat" ]] then overrides+=("${path}/${mod}") prdebug "$cfg: added override" \ "\"${path}/${mod}\"" else prdebug "$cfg: override \"$v\" is" \ "ignored since \"$kverpat\"" \ "doesn't match \"$kernel\"" fi ;; external) # kverpat dir read -r kverpat path <<<"$v" if [[ ! "$kverpat" || ! "$path" ]]; then prinfo "$cfg: ignoring incorrect" \ "external option: \"$k $v\"" continue fi if [[ '*' = "$kverpat" \ || "$kernel" =~ "$kverpat" ]] then external_dirs+=("$path") prdebug "$cfg: added external" \ "directory \"$path\"" else prdebug "$cfg: external directory" \ "\"$path\" is ignored since" \ "\"$kverpat\" doesn't match " \ "\"$kernel\"" fi ;; '#'*|'') # comments and empty strings ;; include|make_map_files) # ignored by depmod ;; *) prinfo "$cfg: unknown depmod configuration" \ "option \"$k $v\"" ;; esac done < "$cfg" done # "updates built-in" is the default search list : "${search_list:=updates}" ## Build a list of regular expressions for grepping modules.dep local pathlist=() for f in "${overrides[@]}"; do pathlist+=("^$(re_escape "$f")") done for f in $(printf "%s" "$search_list"); do # Ignoring builtin modules [ "built-in" != "$f" ] || continue if [ "external" = "$f" ]; then for e in "${external_dirs[@]}"; do pathlist+=("$(re_escape "${e%/}")/[^:]+") done fi pathlist+=("$(re_escape "${f%/}")/[^:]+") done ## Filter modules.dep, canonicalise the resulting filenames and supply ## them to instmods. [ 0 -lt "${#pathlist[@]}" ] || return 0 printf "^%s\.ko(\.gz|\.bz2|\.xz)?:\n" "${pathlist[@]}" \ | (LANG=C grep -E -o -f - -- "$depmod_modules_dep" || exit 0) \ | tr -d ':' \ | (cd "$depmod_module_dir" || exit; xargs -r realpath -se --) \ | instmods || return 1 return 0 } modules.d/03rescue/module-setup.sh 0000755 00000000571 15053306611 0013054 0 ustar 00 #!/bin/bash # called by dracut check() { # do not add this module by default return 255 } # called by dracut depends() { return 0 } # called by dracut install() { inst_multiple -o ps grep more cat rm strace free showmount \ ping netstat rpcinfo vi scp ping6 ssh \ fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck } modules.d/04watchdog/watchdog-stop.sh 0000755 00000000075 15053306611 0013526 0 ustar 00 #!/bin/sh [ -c /dev/watchdog ] && printf 'V' > /dev/watchdog modules.d/04watchdog/watchdog.sh 0000755 00000000365 15053306611 0012545 0 ustar 00 #!/bin/sh if [ -e /dev/watchdog ]; then if [ ! -e /tmp/watchdog_timeout ]; then wdctl -s 60 /dev/watchdog >/dev/null 2>&1 > /tmp/watchdog_timeout fi info "Triggering watchdog" >/dev/watchdog else modprobe ib700wdt modprobe i6300esb fi modules.d/04watchdog/module-setup.sh 0000755 00000001754 15053306611 0013373 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { echo watchdog-modules return 0 } # called by dracut install() { # Do not add watchdog hooks if systemd module is included # In that case, systemd will manage watchdog kick if ! dracut_module_included "systemd"; then inst_hook cmdline 00 "$moddir/watchdog.sh" inst_hook cmdline 50 "$moddir/watchdog.sh" inst_hook pre-trigger 00 "$moddir/watchdog.sh" inst_hook initqueue 00 "$moddir/watchdog.sh" inst_hook mount 00 "$moddir/watchdog.sh" inst_hook mount 50 "$moddir/watchdog.sh" inst_hook mount 99 "$moddir/watchdog.sh" inst_hook pre-pivot 00 "$moddir/watchdog.sh" inst_hook pre-pivot 99 "$moddir/watchdog.sh" inst_hook cleanup 00 "$moddir/watchdog.sh" inst_hook cleanup 99 "$moddir/watchdog.sh" fi inst_hook emergency 02 "$moddir/watchdog-stop.sh" inst_multiple -o wdctl } modules.d/50plymouth/plymouth-populate-initrd.sh 0000755 00000002656 15053306611 0016033 0 ustar 00 #!/bin/bash PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png" PLYMOUTH_THEME=$(plymouth-set-default-theme) inst_multiple plymouthd plymouth \ /etc/system-release test -e "${PLYMOUTH_LOGO_FILE}" && inst_simple "${PLYMOUTH_LOGO_FILE}" mkdir -m 0755 -p "${initdir}/usr/share/plymouth" inst_libdir_file "plymouth/text.so" "plymouth/details.so" if [[ $hostonly ]]; then inst_multiple \ "/usr/share/plymouth/themes/details/details.plymouth" \ "/usr/share/plymouth/themes/text/text.plymouth" \ if [[ -d /usr/share/plymouth/themes/${PLYMOUTH_THEME} ]]; then for x in "/usr/share/plymouth/themes/${PLYMOUTH_THEME}"/* ; do [[ -f "$x" ]] || break inst $x done fi if [ -L /usr/share/plymouth/themes/default.plymouth ]; then inst /usr/share/plymouth/themes/default.plymouth # Install plugin for this theme PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c || [ -n "$b" ]; do echo $b; done;) inst_libdir_file "plymouth/${PLYMOUTH_PLUGIN}.so" fi else for x in /usr/share/plymouth/themes/{text,details}/* ; do [[ -f "$x" ]] || continue THEME_DIR=$(dirname "$x") mkdir -m 0755 -p "${initdir}/$THEME_DIR" inst_multiple "$x" done ( cd ${initdir}/usr/share/plymouth/themes; ln -s text/text.plymouth default.plymouth 2>&1; ) fi modules.d/50plymouth/plymouth-emergency.sh 0000755 00000000063 15053306611 0014657 0 ustar 00 #!/bin/sh plymouth --hide-splash 2>/dev/null || : modules.d/50plymouth/plymouth-newroot.sh 0000755 00000000161 15053306611 0014375 0 ustar 00 #!/bin/sh if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then plymouth --newroot=$NEWROOT fi modules.d/50plymouth/plymouth-pretrigger.sh 0000755 00000002231 15053306611 0015052 0 ustar 00 #!/bin/sh if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then # first trigger graphics subsystem udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1 # first trigger graphics and tty subsystem udevadm trigger --action=add \ --subsystem-match=graphics \ --subsystem-match=drm \ --subsystem-match=tty \ --subsystem-match=acpi \ >/dev/null 2>&1 udevadm settle --timeout=180 2>&1 | vinfo info "Starting plymouth daemon" mkdir -m 0755 /run/plymouth read consoledev rest < /sys/class/tty/console/active consoledev=${consoledev:-tty0} [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev" plymouthd --attach-to-session --pid-file /run/plymouth/pid plymouth --show-splash 2>&1 | vinfo # reset tty after plymouth messed with it [ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev" fi fi modules.d/50plymouth/module-setup.sh 0000755 00000002334 15053306611 0013450 0 ustar 00 #!/bin/bash pkglib_dir() { local _dirs="/usr/lib/plymouth /usr/libexec/plymouth/" if find_binary dpkg-architecture &>/dev/null; then _dirs+=" /usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)/plymouth" fi for _dir in $_dirs; do if [ -x $_dir/plymouth-populate-initrd ]; then echo $_dir return fi done } # called by dracut check() { [[ "$mount_needs" ]] && return 1 [ -z $(pkglib_dir) ] && return 1 require_binaries plymouthd plymouth plymouth-set-default-theme } # called by dracut depends() { echo drm } # called by dracut install() { PKGLIBDIR=$(pkglib_dir) if grep -q nash ${PKGLIBDIR}/plymouth-populate-initrd \ || [ ! -x ${PKGLIBDIR}/plymouth-populate-initrd ]; then . "$moddir"/plymouth-populate-initrd.sh else PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \ ${PKGLIBDIR}/plymouth-populate-initrd -t "$initdir" fi inst_hook emergency 50 "$moddir"/plymouth-emergency.sh inst_multiple readlink if ! dracut_module_included "systemd"; then inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh fi } modules.d/91crypt-loop/crypt-loop-lib.sh 0000755 00000002376 15053306611 0014143 0 ustar 00 #!/bin/sh command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh # loop_decrypt mnt_point keypath keydev device # # Decrypts symmetrically encrypted key to standard output. # # mnt_point - mount point where <keydev> is already mounted # keypath - LUKS encrypted loop file path relative to <mnt_point> # keydev - device on which key resides; only to display in prompt # device - device to be opened by cryptsetup; only to display in prompt loop_decrypt() { local mntp="$1" local keypath="$2" local keydev="$3" local device="$4" local key="/dev/mapper/$(str_replace "loop-$keydev-$mntp-$keypath" '/' '-')" if [ ! -b $key ]; then local loopdev=$(losetup -f "${mntp}/${keypath}" --show) local opts="-d - luksOpen $loopdev ${key##*/}" ask_for_password \ --cmd "cryptsetup $opts" \ --prompt "Password ($keypath on $keydev for $device)" \ --tty-echo-off [ -b $key ] || die "Failed to unlock $keypath on $keydev for $device." printf "%s\n" "cryptsetup luksClose \"$key\"" > ${hookdir}/cleanup/"crypt-loop-cleanup-10-${key##*/}".sh printf "%s\n" "losetup -d \"$loopdev\"" > ${hookdir}/cleanup/"crypt-loop-cleanup-20-${loopdev##*/}".sh fi cat $key } modules.d/91crypt-loop/module-setup.sh 0000755 00000000567 15053306611 0013712 0 ustar 00 #!/bin/bash # called by dracut check() { require_binaries losetup || return 1 return 255 } # called by dracut depends() { echo crypt } # called by dracut installkernel() { hostonly='' instmods loop } # called by dracut install() { inst_multiple losetup inst "$moddir/crypt-loop-lib.sh" "/lib/dracut-crypt-loop-lib.sh" dracut_need_initqueue } modules.d/98dracut-systemd/dracut-emergency.sh 0000755 00000002546 15053306611 0015373 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d type plymouth >/dev/null 2>&1 && plymouth quit export _rdshell_name="dracut" action="Boot" hook="emergency" _emergency_action=$(getarg rd.emergency) if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then FSTXT="/run/dracut/fsck/fsck_help_$fstype.txt" source_hook "$hook" echo rdsosreport echo echo echo 'Entering emergency mode. Exit the shell to continue.' echo 'Type "journalctl" to view system logs.' echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot' echo 'after mounting them and attach it to a bug report.' echo echo [ -f "$FSTXT" ] && cat "$FSTXT" [ -f /etc/profile ] && . /etc/profile [ -z "$PS1" ] && export PS1="$_name:\${PWD}# " exec sh -i -l else export hook="shutdown-emergency" warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line." source_hook "$hook" [ -z "$_emergency_action" ] && _emergency_action=halt fi /bin/rm -f -- /.console_lock case "$_emergency_action" in reboot) reboot || exit 1;; poweroff) poweroff || exit 1;; halt) halt || exit 1;; esac exit 0 modules.d/98dracut-systemd/dracut-pre-pivot.sh 0000755 00000001577 15053306611 0015345 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab' # pre pivot scripts are sourced just before we doing cleanup and switch over # to the new root. getarg 'rd.break=pre-pivot' 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot" source_hook pre-pivot # pre pivot cleanup scripts are sourced just before we switch over to the new root. getarg 'rd.break=cleanup' 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup" source_hook cleanup _bv=$(getarg rd.break -d rdbreak) && [ -z "$_bv" ] && emergency_shell -n switch_root "Break before switch_root" unset _bv # remove helper symlink [ -h /dev/root ] && rm -f -- /dev/root [ -h /dev/nfs ] && rm -f -- /dev/nfs exit 0 modules.d/98dracut-systemd/dracut-tmpfiles.conf 0000644 00000000207 15053306611 0015540 0 ustar 00 d /run/initramfs 0755 root root - d /run/initramfs/log 0755 root root - L /var/log - - - - ../run/initramfs/log modules.d/98dracut-systemd/dracut-cmdline-ask.sh 0000755 00000000642 15053306611 0015577 0 ustar 00 #!/bin/bash type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh getarg "rd.cmdline=ask" || exit 0 sleep 0.5 echo sleep 0.5 echo sleep 0.5 echo echo echo echo echo "Enter additional kernel command line parameter (end with ctrl-d or .)" while read -e -p "> " line || [ -n "$line" ]; do [[ "$line" == "." ]] && break [[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf done exit 0 modules.d/98dracut-systemd/dracut-mount.sh 0000755 00000002034 15053306611 0014547 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d make_trace_mem "hook mount" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount" # mount scripts actually try to mount the root filesystem, and may # be sourced any number of times. As soon as one suceeds, no more are sourced. i=0 while :; do if ismounted "$NEWROOT"; then usable_root "$NEWROOT" && break; umount "$NEWROOT" fi for f in $hookdir/mount/*.sh; do [ -f "$f" ] && . "$f" if ismounted "$NEWROOT"; then usable_root "$NEWROOT" && break; warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook" umount "$NEWROOT" rm -f -- "$f" fi done i=$(($i+1)) [ $i -gt 20 ] && emergency_shell "Can't mount root filesystem" done export -p > /dracut-state.sh exit 0 modules.d/98dracut-systemd/dracut-mount.service.8 0000644 00000002773 15053306611 0015752 0 ustar 00 '\" t .\" Title: dracut-mount.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-MOUNT\&.SERV" "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-mount.service \- runs the dracut hooks after /sysroot is mounted .SH "SYNOPSIS" .sp dracut\-mount\&.service .SH "DESCRIPTION" .sp This service runs all dracut hooks after the real root is mounted on /sysroot\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-udev.sh 0000755 00000002605 15053306611 0015140 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab' # pre pivot scripts are sourced just before we doing cleanup and switch over # to the new root. getarg 'rd.break=pre-udev' 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break pre-udev" source_hook pre-udev _modprobe_d=/etc/modprobe.d if [ -d /usr/lib/modprobe.d ] ; then _modprobe_d=/usr/lib/modprobe.d elif [ -d /lib/modprobe.d ] ; then _modprobe_d=/lib/modprobe.d elif [ ! -d $_modprobe_d ] ; then mkdir -p $_modprobe_d fi for i in $(getargs rd.driver.pre -d rdloaddriver=); do ( IFS=, for p in $i; do modprobe $p 2>&1 | vinfo done ) done [ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d for i in $(getargs rd.driver.blacklist -d rdblacklist=); do ( IFS=, for p in $i; do echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf done ) done for p in $(getargs rd.driver.post -d rdinsmodpost=); do echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf _do_insmodpost=1 done [ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh unset _do_insmodpost _modprobe_d unset i export -p > /dracut-state.sh exit 0 modules.d/98dracut-systemd/dracut-initqueue.service 0000644 00000001465 15053306611 0016447 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut initqueue hook Documentation=man:dracut-initqueue.service(8) DefaultDependencies=no Before=remote-fs-pre.target Wants=remote-fs-pre.target After=systemd-udev-trigger.service Wants=systemd-udev-trigger.service ConditionPathExists=/usr/lib/initrd-release ConditionPathExists=|/lib/dracut/need-initqueue ConditionKernelCommandLine=|rd.break=initqueue Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-initqueue StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-mount.service 0000644 00000001431 15053306611 0015572 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut mount hook Documentation=man:dracut-mount.service(8) After=initrd-root-fs.target initrd-parse-etc.service After=dracut-initqueue.service dracut-pre-mount.service ConditionPathExists=/usr/lib/initrd-release ConditionDirectoryNotEmpty=|/lib/dracut/hooks/mount ConditionKernelCommandLine=|rd.break=mount DefaultDependencies=no Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-mount StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/rootfs-generator.sh 0000755 00000010070 15053306611 0015424 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh generator_wait_for_dev() { local _name local _timeout _name="$(str_replace "$1" '/' '\x2f')" _timeout=$(getarg rd.timeout) _timeout=${_timeout:-0} if ! [ -e "$hookdir/initqueue/finished/devexists-${_name}.sh" ]; then # If a LUKS device needs unlocking via systemd in the initrd, assume # it's for the root device. In that case, don't block on it if it's # after remote-fs-pre.target since the initqueue is ordered before it so # it will never actually show up (think Tang-pinned rootfs). cat > "$hookdir/initqueue/finished/devexists-${_name}.sh" << EOF if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ -e "$1" ] fi EOF { printf '[ -e "%s" ] || ' $1 printf 'warn "\"%s\" does not exist"\n' $1 } >> "$hookdir/emergency/80-${_name}.sh" fi _name=$(dev_unit_name "$1") if ! [ -L "$GENERATOR_DIR"/initrd.target.wants/${_name}.device ]; then [ -d "$GENERATOR_DIR"/initrd.target.wants ] || mkdir -p "$GENERATOR_DIR"/initrd.target.wants ln -s ../${_name}.device "$GENERATOR_DIR"/initrd.target.wants/${_name}.device fi if ! [ -f "$GENERATOR_DIR"/${_name}.device.d/timeout.conf ]; then mkdir -p "$GENERATOR_DIR"/${_name}.device.d { echo "[Unit]" echo "JobTimeoutSec=$_timeout" echo "JobRunningTimeoutSec=$_timeout" } > "$GENERATOR_DIR"/${_name}.device.d/timeout.conf fi } generator_mount_rootfs() { local _type=$2 local _flags=$3 local _name [ -z "$1" ] && return 0 _name=$(dev_unit_name "$1") [ -d "$GENERATOR_DIR" ] || mkdir -p "$GENERATOR_DIR" if ! [ -f "$GENERATOR_DIR"/sysroot.mount ]; then { echo "[Unit]" echo "Before=initrd-root-fs.target" echo "Requires=systemd-fsck@${_name}.service" echo "After=systemd-fsck@${_name}.service" echo "[Mount]" echo "Where=/sysroot" echo "What=$1" echo "Options=${_flags}" echo "Type=${_type}" } > "$GENERATOR_DIR"/sysroot.mount fi if ! [ -L "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount ]; then [ -d "$GENERATOR_DIR"/initrd-root-fs.target.requires ] || mkdir -p "$GENERATOR_DIR"/initrd-root-fs.target.requires ln -s ../sysroot.mount "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount fi } generator_fsck_after_pre_mount() { local _name [ -z "$1" ] && return 0 _name=$(dev_unit_name "$1") [ -d /run/systemd/generator/systemd-fsck@${_name}.service.d ] || mkdir -p /run/systemd/generator/systemd-fsck@${_name}.service.d if ! [ -f /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf ]; then { echo "[Unit]" echo "After=dracut-pre-mount.service" } > /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf fi } root=$(getarg root=) case "$root" in block:LABEL=*|LABEL=*) root="${root#block:}" root="$(echo $root | sed 's,/,\\x2f,g')" root="block:/dev/disk/by-label/${root#LABEL=}" rootok=1 ;; block:UUID=*|UUID=*) root="${root#block:}" root="block:/dev/disk/by-uuid/${root#UUID=}" rootok=1 ;; block:PARTUUID=*|PARTUUID=*) root="${root#block:}" root="block:/dev/disk/by-partuuid/${root#PARTUUID=}" rootok=1 ;; block:PARTLABEL=*|PARTLABEL=*) root="${root#block:}" root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}" rootok=1 ;; /dev/nfs) # ignore legacy /dev/nfs ;; /dev/*) root="block:${root}" rootok=1 ;; esac GENERATOR_DIR="$1" if [ "$rootok" = "1" ]; then generator_wait_for_dev "${root#block:}" "$RDRETRY" generator_fsck_after_pre_mount "${root#block:}" strstr "$(cat /proc/cmdline)" 'root=' || generator_mount_rootfs "${root#block:}" "$(getarg rootfstype=)" "$(getarg rootflags=)" fi exit 0 modules.d/98dracut-systemd/dracut-pre-trigger.service.8 0000644 00000003016 15053306611 0017026 0 ustar 00 '\" t .\" Title: dracut-pre-trigger.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-PRE\-TRIGGER" "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-pre-trigger.service \- runs the dracut hooks before udevd is triggered .SH "SYNOPSIS" .sp dracut\-pre\-trigger\&.service .SH "DESCRIPTION" .sp This service runs all dracut hooks before udevd is triggered in the initramfs\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-trigger.service.8.asc 0000644 00000000670 15053306611 0017576 0 ustar 00 DRACUT-PRE-TRIGGER.SERVICE(8) ============================= :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-pre-trigger.service - runs the dracut hooks before udevd is triggered SYNOPSIS -------- dracut-pre-trigger.service DESCRIPTION ----------- This service runs all dracut hooks before udevd is triggered in the initramfs. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/dracut-pre-trigger.service 0000644 00000001622 15053306611 0016661 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut pre-trigger hook Documentation=man:dracut-pre-trigger.service(8) DefaultDependencies=no Before=systemd-udev-trigger.service dracut-initqueue.service After=dracut-pre-udev.service systemd-udevd.service systemd-tmpfiles-setup-dev.service Wants=dracut-pre-udev.service systemd-udevd.service ConditionPathExists=/usr/lib/initrd-release ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-trigger ConditionKernelCommandLine=|rd.break=pre-trigger Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-pre-trigger StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-shutdown.service.8.asc 0000644 00000003530 15053306611 0017220 0 ustar 00 DRACUT-SHUTDOWN.SERVICE(8) =========================== :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-shutdown.service - unpack the initramfs to /run/initramfs SYNOPSIS -------- dracut-shutdown.service DESCRIPTION ----------- This service unpacks the initramfs image to /run/initramfs. systemd pivots into /run/initramfs at shutdown, so the root filesystem can be safely unmounted. The following steps are executed during a shutdown: * systemd switches to the shutdown.target * systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service * dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore which unpacks the initramfs to /run/initramfs * systemd finishes shutdown.target * systemd kills all processes * systemd tries to unmount everything and mounts the remaining read-only * systemd checks, if there is a /run/initramfs/shutdown executable * if yes, it does a pivot_root to /run/initramfs and executes ./shutdown. The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable. * shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules This ensures, that all devices are disassembled and unmounted cleanly. To debug the shutdown process, you can get a shell in the shutdown procedure by injecting "rd.break=pre-shutdown rd.shell" or "rd.break=shutdown rd.shell". ---- # mkdir -p /run/initramfs/etc/cmdline.d # echo "rd.break=pre-shutdown rd.shell" > /run/initramfs/etc/cmdline.d/debug.conf # touch /run/initramfs/.need_shutdown ---- In case the unpack of the initramfs fails, dracut-shutdown-onfailure.service executes to make sure switch root doesn't happen, since it would result in switching to an incomplete initramfs. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut*(8) modules.d/98dracut-systemd/dracut-initqueue.sh 0000755 00000004143 15053306611 0015420 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab' getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue" RDRETRY=$(getarg rd.retry -d 'rd_retry=') RDRETRY=${RDRETRY:-180} RDRETRY=$(($RDRETRY*2)) export RDRETRY main_loop=0 export main_loop while :; do check_finished && break udevadm settle --exit-if-exists=$hookdir/initqueue/work check_finished && break if [ -f $hookdir/initqueue/work ]; then rm -f -- "$hookdir/initqueue/work" fi for job in $hookdir/initqueue/*.sh; do [ -e "$job" ] || break job=$job . $job check_finished && break 2 done udevadm settle --timeout=0 >/dev/null 2>&1 || continue for job in $hookdir/initqueue/settled/*.sh; do [ -e "$job" ] || break job=$job . $job check_finished && break 2 done udevadm settle --timeout=0 >/dev/null 2>&1 || continue # no more udev jobs and queues empty. sleep 0.5 for i in /run/systemd/ask-password/ask.*; do [ -e "$i" ] && continue 2 done if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then warn "dracut-initqueue timeout - starting timeout scripts" for job in $hookdir/initqueue/timeout/*.sh; do [ -e "$job" ] || break job=$job . $job udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0 [ -f $hookdir/initqueue/work ] && main_loop=0 [ $main_loop -eq 0 ] && break done fi main_loop=$(($main_loop+1)) if [ $main_loop -gt $RDRETRY ]; then if ! [ -f /sysroot/etc/fstab ] || ! [ -e /sysroot/sbin/init ] ; then emergency_shell "Could not boot." fi warn "Not all disks have been found." warn "You might want to regenerate your initramfs." break fi done unset job unset queuetriggered unset main_loop unset RDRETRY export -p > /dracut-state.sh exit 0 modules.d/98dracut-systemd/dracut-pre-udev.service.8 0000644 00000003001 15053306611 0016320 0 ustar 00 '\" t .\" Title: dracut-pre-udev.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-PRE\-UDEV\&." "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-pre-udev.service \- runs the dracut hooks before udevd is started .SH "SYNOPSIS" .sp dracut\-pre\-udev\&.service .SH "DESCRIPTION" .sp This service runs all dracut hooks before udevd is started in the initramfs\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-pivot.service.8 0000644 00000003005 15053306611 0016522 0 ustar 00 '\" t .\" Title: dracut-pre-pivot.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-PRE\-PIVOT\&" "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-pre-pivot.service \- runs the dracut hooks before switching root .SH "SYNOPSIS" .sp dracut\-pre\-pivot\&.service .SH "DESCRIPTION" .sp This service runs all dracut hooks before the system switched to the real root\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-udev.service.8.asc 0000644 00000000650 15053306611 0017074 0 ustar 00 DRACUT-PRE-UDEV.SERVICE(8) ========================== :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-pre-udev.service - runs the dracut hooks before udevd is started SYNOPSIS -------- dracut-pre-udev.service DESCRIPTION ----------- This service runs all dracut hooks before udevd is started in the initramfs. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/dracut-mount.service.8.asc 0000644 00000000640 15053306611 0016506 0 ustar 00 DRACUT-MOUNT.SERVICE(8) ======================= :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-mount.service - runs the dracut hooks after /sysroot is mounted SYNOPSIS -------- dracut-mount.service DESCRIPTION ----------- This service runs all dracut hooks after the real root is mounted on /sysroot. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/dracut-cmdline.service 0000644 00000001610 15053306611 0016042 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut cmdline hook Documentation=man:dracut-cmdline.service(8) DefaultDependencies=no Before=dracut-pre-udev.service After=systemd-journald.socket Wants=systemd-journald.socket ConditionPathExists=/usr/lib/initrd-release ConditionPathExistsGlob=|/etc/cmdline.d/*.conf ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline ConditionKernelCommandLine=|rd.break=cmdline ConditionKernelCommandLine=|resume ConditionKernelCommandLine=|noresume Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-cmdline StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-cmdline.service.8 0000644 00000003023 15053306611 0016210 0 ustar 00 '\" t .\" Title: dracut-cmdline.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-CMDLINE\&.SE" "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-cmdline.service \- runs the dracut hooks to parse the kernel command line .SH "SYNOPSIS" .sp dracut\-cmdline\&.service .SH "DESCRIPTION" .sp This service runs all the dracut hooks to parse the kernel command line in the initramfs\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-mount.sh 0000755 00000000766 15053306611 0015345 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab' # pre pivot scripts are sourced just before we doing cleanup and switch over # to the new root. getarg 'rd.break=pre-mount' 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount" source_hook pre-mount export -p > /dracut-state.sh exit 0 modules.d/98dracut-systemd/dracut-initqueue.service.8.asc 0000644 00000000667 15053306611 0017365 0 ustar 00 DRACUT-INITQUEUE.SERVICE(8) =========================== :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-initqueue.service - runs the dracut main loop to find the real root SYNOPSIS -------- dracut-initqueue.service DESCRIPTION ----------- This service runs all the main loop of dracut in the initramfs to find the real root. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/emergency.service 0000644 00000001264 15053306611 0015132 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=Emergency Shell DefaultDependencies=no After=systemd-vconsole-setup.service Wants=systemd-vconsole-setup.service Conflicts=shutdown.target Before=shutdown.target [Service] Environment=HOME=/ Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot WorkingDirectory=/ ExecStart=/bin/dracut-emergency ExecStopPost=-/usr/bin/systemctl --fail --no-block default Type=idle StandardInput=tty-force StandardOutput=inherit StandardError=inherit KillMode=process IgnoreSIGPIPE=no TasksMax=infinity # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-shutdown.service 0000644 00000000670 15053306611 0016307 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=Restore /run/initramfs on shutdown Documentation=man:dracut-shutdown.service(8) After=local-fs.target boot.mount boot.automount Wants=local-fs.target ConditionPathExists=!/run/initramfs/bin/sh OnFailure=dracut-shutdown-onfailure.service [Service] RemainAfterExit=yes Type=oneshot ExecStart=/bin/true ExecStop=/usr/lib/dracut/dracut-initramfs-restore modules.d/98dracut-systemd/dracut-cmdline.service.8.asc 0000644 00000000672 15053306611 0016764 0 ustar 00 DRACUT-CMDLINE.SERVICE(8) ========================= :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-cmdline.service - runs the dracut hooks to parse the kernel command line SYNOPSIS -------- dracut-cmdline.service DESCRIPTION ----------- This service runs all the dracut hooks to parse the kernel command line in the initramfs. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/dracut-pre-trigger.sh 0000755 00000000723 15053306611 0015637 0 ustar 00 #!/bin/sh export DRACUT_SYSTEMD=1 if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh source_conf /etc/conf.d make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab' source_hook pre-trigger getarg 'rd.break=pre-trigger' 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break pre-trigger" udevadm control --reload >/dev/null 2>&1 || : export -p > /dracut-state.sh exit 0 modules.d/98dracut-systemd/dracut-pre-mount.service 0000644 00000001466 15053306611 0016366 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut pre-mount hook Documentation=man:dracut-pre-mount.service(8) DefaultDependencies=no Before=initrd-root-fs.target sysroot.mount systemd-fsck-root.service After=dracut-initqueue.service cryptsetup.target ConditionPathExists=/usr/lib/initrd-release ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-mount ConditionKernelCommandLine=|rd.break=pre-mount Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-pre-mount StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-pre-mount.service.8 0000644 00000003012 15053306611 0016521 0 ustar 00 '\" t .\" Title: dracut-pre-mount.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-PRE\-MOUNT\&" "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-pre-mount.service \- runs the dracut hooks before /sysroot is mounted .SH "SYNOPSIS" .sp dracut\-pre\-mount\&.service .SH "DESCRIPTION" .sp This service runs all dracut hooks before the real root is mounted on /sysroot\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-udev.service 0000644 00000001741 15053306611 0016163 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut pre-udev hook Documentation=man:dracut-pre-udev.service(8) DefaultDependencies=no Before=systemd-udevd.service dracut-pre-trigger.service After=dracut-cmdline.service Wants=dracut-cmdline.service ConditionPathExists=/usr/lib/initrd-release ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-udev ConditionKernelCommandLine=|rd.break=pre-udev ConditionKernelCommandLine=|rd.driver.blacklist ConditionKernelCommandLine=|rd.driver.pre ConditionKernelCommandLine=|rd.driver.post ConditionPathExistsGlob=|/etc/cmdline.d/*.conf Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-pre-udev StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-emergency.service 0000644 00000001251 15053306611 0016406 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=Dracut Emergency Shell DefaultDependencies=no After=systemd-vconsole-setup.service Wants=systemd-vconsole-setup.service Conflicts=shutdown.target emergency.target [Service] Environment=HOME=/ Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot WorkingDirectory=/ ExecStart=-/bin/dracut-emergency ExecStopPost=-/bin/rm -f -- /.console_lock Type=oneshot StandardInput=tty-force StandardOutput=inherit StandardError=inherit KillMode=process IgnoreSIGPIPE=no TasksMax=infinity # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-shutdown-onfailure.service 0000644 00000000465 15053306611 0020273 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=Service executing upon dracut-shutdown failure to perform cleanup Documentation=man:dracut-shutdown.service(8) DefaultDependencies=no [Service] Type=oneshot ExecStart=-/bin/rm /run/initramfs/shutdown StandardError=null modules.d/98dracut-systemd/dracut-pre-pivot.service 0000644 00000002145 15053306611 0016360 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut pre-pivot and cleanup hook Documentation=man:dracut-pre-pivot.service(8) DefaultDependencies=no After=initrd.target initrd-parse-etc.service sysroot.mount After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service Before=initrd-cleanup.service Wants=remote-fs.target After=remote-fs.target ConditionPathExists=/usr/lib/initrd-release ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-pivot ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cleanup ConditionKernelCommandLine=|rd.break=pre-pivot ConditionKernelCommandLine=|rd.break=cleanup ConditionKernelCommandLine=|rd.break ConditionPathExists=|/dev/root ConditionPathExists=|/dev/nfs Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-pre-pivot StandardInput=null StandardOutput=syslog StandardError=syslog+console KillMode=process RemainAfterExit=yes # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-cmdline-ask.service 0000644 00000001517 15053306611 0016624 0 ustar 00 # This file is part of dracut. # # See dracut.bootup(7) for details [Unit] Description=dracut ask for additional cmdline parameters DefaultDependencies=no Before=dracut-cmdline.service After=systemd-journald.socket After=systemd-vconsole-setup.service Requires=systemd-vconsole-setup.service Wants=systemd-journald.socket ConditionPathExists=/usr/lib/initrd-release ConditionKernelCommandLine=|rd.cmdline=ask ConditionPathExistsGlob=|/etc/cmdline.d/*.conf Conflicts=shutdown.target emergency.target [Service] Environment=DRACUT_SYSTEMD=1 Environment=NEWROOT=/sysroot Type=oneshot ExecStart=-/bin/dracut-cmdline-ask StandardInput=tty StandardOutput=inherit StandardError=inherit RemainAfterExit=yes KillMode=process IgnoreSIGPIPE=no # Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash # terminates cleanly. KillSignal=SIGHUP modules.d/98dracut-systemd/dracut-shutdown.service.8 0000644 00000007345 15053306611 0016463 0 ustar 00 '\" t .\" Title: dracut-shutdown.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 07/15/2025 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-SHUTDOWN\&.S" "8" "07/15/2025" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-shutdown.service \- unpack the initramfs to /run/initramfs .SH "SYNOPSIS" .sp dracut\-shutdown\&.service .SH "DESCRIPTION" .sp This service unpacks the initramfs image to /run/initramfs\&. systemd pivots into /run/initramfs at shutdown, so the root filesystem can be safely unmounted\&. .sp The following steps are executed during a shutdown: .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} systemd switches to the shutdown\&.target .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} systemd starts /lib/systemd/system/shutdown\&.target\&.wants/dracut\-shutdown\&.service .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} dracut\-shutdown\&.service executes /usr/lib/dracut/dracut\-initramfs\-restore which unpacks the initramfs to /run/initramfs .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} systemd finishes shutdown\&.target .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} systemd kills all processes .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} systemd tries to unmount everything and mounts the remaining read\-only .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} systemd checks, if there is a /run/initramfs/shutdown executable .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} if yes, it does a pivot_root to /run/initramfs and executes \&./shutdown\&. The old root is then mounted on /oldroot\&. /usr/lib/dracut/modules\&.d/99shutdown/shutdown\&.sh is the shutdown executable\&. .RE .sp .RS 4 .ie n \{\ \h'-04'\(bu\h'+03'\c .\} .el \{\ .sp -1 .IP \(bu 2.3 .\} shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules .RE .sp This ensures, that all devices are disassembled and unmounted cleanly\&. .sp To debug the shutdown process, you can get a shell in the shutdown procedure by injecting "rd\&.break=pre\-shutdown rd\&.shell" or "rd\&.break=shutdown rd\&.shell"\&. .sp .if n \{\ .RS 4 .\} .nf # mkdir \-p /run/initramfs/etc/cmdline\&.d # echo "rd\&.break=pre\-shutdown rd\&.shell" > /run/initramfs/etc/cmdline\&.d/debug\&.conf # touch /run/initramfs/\&.need_shutdown .fi .if n \{\ .RE .\} .sp In case the unpack of the initramfs fails, dracut\-shutdown\-onfailure\&.service executes to make sure switch root doesn\(cqt happen, since it would result in switching to an incomplete initramfs\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-cmdline.sh 0000755 00000005133 15053306611 0015023 0 ustar 00 #!/bin/sh if [ -f /dracut-state.sh ]; then . /dracut-state.sh 2>/dev/null fi type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release [ -n "$VERSION" ] && info "dracut-$VERSION" if ! getargbool 1 'rd.hostonly'; then [ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf remove_hostonly_files [ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf fi info "Using kernel command line parameters:" $(getcmdline) getargbool 0 rd.udev.log-priority=info -d rd.udev.info -d -n -y rdudevinfo && echo 'udev_log="info"' >> /etc/udev/udev.conf getargbool 0 rd.udev.log-priority=debug -d rd.udev.debug -d -n -y rdudevdebug && echo 'udev_log="debug"' >> /etc/udev/udev.conf source_conf /etc/conf.d # Get the "root=" parameter from the kernel command line, but differentiate # between the case where it was set to the empty string and the case where it # wasn't specified at all. if ! root="$(getarg root=)"; then root_unset='UNSET' fi rflags="$(getarg rootflags=)" getargbool 0 ro && rflags="${rflags},ro" getargbool 0 rw && rflags="${rflags},rw" rflags="${rflags#,}" fstype="$(getarg rootfstype=)" if [ -z "$fstype" ]; then fstype="auto" fi export root export rflags export fstype make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab' # run scriptlets to parse the command line getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline" source_hook cmdline [ -f /lib/dracut/parse-resume.sh ] && . /lib/dracut/parse-resume.sh case "${root}${root_unset}" in block:LABEL=*|LABEL=*) root="${root#block:}" root="$(echo $root | sed 's,/,\\x2f,g')" root="block:/dev/disk/by-label/${root#LABEL=}" rootok=1 ;; block:UUID=*|UUID=*) root="${root#block:}" root="block:/dev/disk/by-uuid/${root#UUID=}" rootok=1 ;; block:PARTUUID=*|PARTUUID=*) root="${root#block:}" root="block:/dev/disk/by-partuuid/${root#PARTUUID=}" rootok=1 ;; block:PARTLABEL=*|PARTLABEL=*) root="${root#block:}" root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}" rootok=1 ;; /dev/*) root="block:${root}" rootok=1 ;; UNSET|gpt-auto) # systemd's gpt-auto-generator handles this case. rootok=1 ;; esac [ -z "${root}${root_unset}" ] && die "Empty root= argument" [ -z "$rootok" ] && die "Don't know how to handle 'root=$root'" export root rflags fstype netroot NEWROOT export -p > /dracut-state.sh exit 0 modules.d/98dracut-systemd/dracut-pre-pivot.service.8.asc 0000644 00000000655 15053306611 0017277 0 ustar 00 DRACUT-PRE-PIVOT.SERVICE(8) =========================== :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-pre-pivot.service - runs the dracut hooks before switching root SYNOPSIS -------- dracut-pre-pivot.service DESCRIPTION ----------- This service runs all dracut hooks before the system switched to the real root. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/dracut-initqueue.service.8 0000644 00000003016 15053306611 0016607 0 ustar 00 '\" t .\" Title: dracut-initqueue.service .\" Author: [see the "AUTHORS" section] .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/> .\" Date: 10/09/2018 .\" Manual: dracut .\" Source: dracut .\" Language: English .\" .TH "DRACUT\-INITQUEUE\&." "8" "10/09/2018" "dracut" "dracut" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" dracut-initqueue.service \- runs the dracut main loop to find the real root .SH "SYNOPSIS" .sp dracut\-initqueue\&.service .SH "DESCRIPTION" .sp This service runs all the main loop of dracut in the initramfs to find the real root\&. .SH "AUTHORS" .sp Harald Hoyer .SH "SEE ALSO" .sp \fBdracut\&.bootup\fR(7) \fBdracut\fR(8) modules.d/98dracut-systemd/dracut-pre-mount.service.8.asc 0000644 00000000662 15053306611 0017276 0 ustar 00 DRACUT-PRE-MOUNT.SERVICE(8) =========================== :doctype: manpage :man source: dracut :man manual: dracut NAME ---- dracut-pre-mount.service - runs the dracut hooks before /sysroot is mounted SYNOPSIS -------- dracut-pre-mount.service DESCRIPTION ----------- This service runs all dracut hooks before the real root is mounted on /sysroot. AUTHORS ------- Harald Hoyer SEE ALSO -------- *dracut.bootup*(7) *dracut*(8) modules.d/98dracut-systemd/module-setup.sh 0000755 00000004030 15053306611 0014546 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $mount_needs ]] && return 1 if ! dracut_module_included "systemd-initrd"; then derror "dracut-systemd needs systemd-initrd in the initramfs" return 1 fi return 0 } # called by dracut depends() { echo "systemd-initrd" return 0 } installkernel() { return 0 } # called by dracut install() { local _mods inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target" inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants" for i in \ dracut-cmdline.service \ dracut-cmdline-ask.service \ dracut-initqueue.service \ dracut-mount.service \ dracut-pre-mount.service \ dracut-pre-pivot.service \ dracut-pre-trigger.service \ dracut-pre-udev.service \ ; do inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}" systemctl -q --root "$initdir" add-wants initrd.target "$i" done inst_simple "$moddir/dracut-tmpfiles.conf" "$tmpfilesdir/dracut-tmpfiles.conf" } modules.d/71prefixdevname/module-setup.sh 0000755 00000000365 15053306611 0014431 0 ustar 00 #!/bin/bash # Make sure we always include generated link files in initrd check() { return 0 } install() { if dracut_module_included "systemd"; then inst_multiple -H -o /etc/systemd/network/71-net-ifnames-prefix-*.link fi } modules.d/95cifs/cifs-lib.sh 0000755 00000001711 15053306611 0011567 0 ustar 00 #!/bin/sh # cifs_to_var CIFSROOT # use CIFSROOT to set $server, $path, and $options. # CIFSROOT is something like: cifs://[<username>[:<password>]]@<host>/<path> # NETIF is used to get information from DHCP options, if needed. type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh cifs_to_var() { local cifsuser; local cifspass # Check required arguments server=${1##cifs://} cifsuser=${server%@*} cifspass=${cifsuser#*:} if [ "$cifspass" != "$cifsuser" ]; then cifsuser=${cifsuser%:*} else cifspass=$(getarg cifspass) fi if [ "$cifsuser" != "$server" ]; then server="${server#*@}" else cifsuser=$(getarg cifsuser) fi path=${server#*/} server=${server%/*} if [ ! "$cifsuser" -o ! "$cifspass" ]; then die "For CIFS support you need to specify a cifsuser and cifspass either in the cifsuser and cifspass commandline parameters or in the root= CIFS URL." fi options="user=$cifsuser,pass=$cifspass" } modules.d/95cifs/parse-cifsroot.sh 0000755 00000002236 15053306611 0013042 0 ustar 00 #!/bin/sh # # root=cifs://[user:pass@]<server>/<folder> # # This syntax can come from DHCP root-path as well. # # If a username or password are not specified as part of the root, then they # will be pulled from cifsuser and cifspass on the kernel command line, # respectively. # type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh . /lib/cifs-lib.sh # This script is sourced, so root should be set. But let's be paranoid [ -z "$root" ] && root=$(getarg root=) if [ -z "$netroot" ]; then for netroot in $(getargs netroot=); do [ "${netroot%%:*}" = "cifs" ] && break done [ "${netroot%%:*}" = "cifs" ] || unset netroot fi # Root takes precedence over netroot if [ "${root%%:*}" = "cifs" ] ; then if [ -n "$netroot" ] ; then warn "root takes precedence over netroot. Ignoring netroot" fi netroot=$root unset root fi # If it's not cifs we don't continue [ "${netroot%%:*}" = "cifs" ] || return # Check required arguments cifs_to_var $netroot # If we don't have a server, we need dhcp if [ -z "$server" ] ; then DHCPORSERVER="1" fi; # Done, all good! rootok=1 echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/cifsroot.sh modules.d/95cifs/cifsroot.sh 0000755 00000001141 15053306611 0011724 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh . /lib/cifs-lib.sh [ "$#" = 3 ] || exit 1 # root is in the form root=cifs://user:pass@[server]/[folder] either from # cmdline or dhcp root-path netif="$1" root="$2" NEWROOT="$3" cifs_to_var $root echo server: $server echo path: $path echo options: $options mount.cifs //$server/$path $NEWROOT -o $options && { [ -e /dev/root ] || ln -s null /dev/root ; } # inject new exit_if_exists echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -f -- "$job"' > $hookdir/initqueue/cifs.sh # force udevsettle to break > $hookdir/initqueue/work modules.d/95cifs/module-setup.sh 0000755 00000002363 15053306611 0012526 0 ustar 00 #!/bin/bash # called by dracut check() { # If our prerequisites are not met, fail anyways. require_binaries mount.cifs || return 1 [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ "$fs" == "cifs" ]] && return 0 done return 255 } return 0 } # called by dracut depends() { # We depend on network modules being loaded echo network } # called by dracut installkernel() { instmods cifs ipv6 # hash algos instmods md4 md5 sha256 # ciphers instmods aes arc4 des ecb # macs instmods hmac cmac } # called by dracut install() { local _i local _nsslibs inst_multiple -o mount.cifs inst_multiple /etc/services /etc/nsswitch.conf /etc/protocols inst_libdir_file 'libcap-ng.so*' _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|') _nsslibs=${_nsslibs#|} _nsslibs=${_nsslibs%|} inst_libdir_file -n "$_nsslibs" 'libnss_*.so*' inst_hook cmdline 90 "$moddir/parse-cifsroot.sh" inst "$moddir/cifsroot.sh" "/sbin/cifsroot" inst "$moddir/cifs-lib.sh" "/lib/cifs-lib.sh" dracut_need_initqueue } modules.d/95virtfs/mount-virtfs.sh 0000755 00000003507 15053306611 0013152 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh filter_rootopts() { rootopts=$1 # strip ro and rw options local OLDIFS="$IFS" IFS=, set -- $rootopts IFS="$OLDIFS" local v while [ $# -gt 0 ]; do case $1 in rw|ro);; defaults);; *) v="$v,${1}";; esac shift done rootopts=${v#,} echo $rootopts } mount_root() { local _ret rootfs="9p" rflags="trans=virtio,version=9p2000.L" modprobe 9pnet_virtio mount -t ${rootfs} -o "$rflags",ro "${root#virtfs:}" "$NEWROOT" rootopts= if getargbool 1 rd.fstab -n rd_NO_FSTAB \ && ! getarg rootflags \ && [ -f "$NEWROOT/etc/fstab" ] \ && ! [ -L "$NEWROOT/etc/fstab" ]; then # if $NEWROOT/etc/fstab contains special mount options for # the root filesystem, # remount it with the proper options rootopts="defaults" while read dev mp fs opts rest || [ -n "$dev" ]; do # skip comments [ "${dev%%#*}" != "$dev" ] && continue if [ "$mp" = "/" ]; then rootopts=$opts break fi done < "$NEWROOT/etc/fstab" rootopts=$(filter_rootopts $rootopts) fi # we want rootflags (rflags) to take precedence so prepend rootopts to # them; rflags is guaranteed to not be empty rflags="${rootopts:+"${rootopts},"}${rflags}" umount "$NEWROOT" info "Remounting ${root#virtfs:} with -o ${rflags}" mount -t ${rootfs} -o "$rflags" "${root#virtfs:}" "$NEWROOT" 2>&1 | vinfo [ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null [ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null } if [ -n "$root" -a -z "${root%%virtfs:*}" ]; then mount_root fi : modules.d/95virtfs/parse-virtfs.sh 0000755 00000000135 15053306611 0013114 0 ustar 00 #!/bin/sh if [ "${root%%:*}" = "virtfs" ] ; then modprobe 9pnet_virtio rootok=1 fi modules.d/95virtfs/module-setup.sh 0000755 00000001712 15053306611 0013114 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $hostonly ]] || [[ $mount_needs ]] && { for fs in "${host_fs_types[@]}"; do [[ "$fs" == "9p" ]] && return 0 done return 255 } if type -P systemd-detect-virt >/dev/null 2>&1; then vm=$(systemd-detect-virt --vm >/dev/null 2>&1) (($? != 0)) && return 255 [[ $vm = "qemu" ]] && return 0 [[ $vm = "kvm" ]] && return 0 [[ $vm = "bochs" ]] && return 0 fi for i in /sys/class/dmi/id/*_vendor; do [[ -f $i ]] || continue read vendor < $i [[ "$vendor" == "QEMU" ]] && return 0 [[ "$vendor" == "Bochs" ]] && return 0 done return 255 } # called by dracut depends() { return 0 } # called by dracut installkernel() { instmods 9p 9pnet_virtio virtio_pci } # called by dracut install() { inst_hook cmdline 95 "$moddir/parse-virtfs.sh" inst_hook mount 99 "$moddir/mount-virtfs.sh" } modules.d/00bash/module-setup.sh 0000755 00000000551 15053306611 0012476 0 ustar 00 #!/bin/bash # called by dracut check() { require_binaries /bin/bash } # called by dracut depends() { return 0 } # called by dracut install() { # If another shell is already installed, do not use bash [[ -x $initdir/bin/sh ]] && return # Prefer bash as /bin/sh if it is available. inst /bin/bash && ln -sf bash "${initdir}/bin/sh" } modules.d/90kernel-modules/parse-kernel.sh 0000755 00000001631 15053306611 0014465 0 ustar 00 #!/bin/sh _modprobe_d=/etc/modprobe.d if [ -d /usr/lib/modprobe.d ] ; then _modprobe_d=/usr/lib/modprobe.d elif [ -d /lib/modprobe.d ] ; then _modprobe_d=/lib/modprobe.d elif [ ! -d $_modprobe_d ] ; then mkdir -p $_modprobe_d fi for i in $(getargs rd.driver.pre -d rdloaddriver=); do ( IFS=, for p in $i; do modprobe $p 2>&1 | vinfo done ) done [ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d for i in $(getargs rd.driver.blacklist -d rdblacklist=); do ( IFS=, for p in $i; do echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf done ) done for p in $(getargs rd.driver.post -d rdinsmodpost=); do echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf _do_insmodpost=1 done [ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh unset _do_insmodpost _modprobe_d modules.d/90kernel-modules/module-setup.sh 0000755 00000007351 15053306611 0014525 0 ustar 00 #!/bin/bash # called by dracut installkernel() { local _blockfuncs='ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect|mmc_add_host|sdhci_add_host|scsi_add_host_with_dma' find_kernel_modules_external () { local _OLDIFS local external_pattern="^/" [[ -f "$srcmods/modules.dep" ]] || return 0 _OLDIFS=$IFS IFS=: while read a rest; do [[ $a =~ $external_pattern ]] || continue printf "%s\n" "$a" done < "$srcmods/modules.dep" IFS=$_OLDIFS } is_block_dev() { [ -e /sys/dev/block/$1 ] && return 0 return 1 } install_block_modules () { hostonly='' instmods sr_mod sd_mod scsi_dh ata_piix instmods \ scsi_dh_rdac scsi_dh_emc scsi_dh_alua \ =ide nvme vmd nfit \ virtio_blk dracut_instmods -o -s "${_blockfuncs}" "=drivers" } if [[ -z $drivers ]]; then hostonly='' instmods \ hid_generic unix \ ehci-hcd ehci-pci ehci-platform \ ohci-hcd ohci-pci \ uhci-hcd \ xhci-hcd xhci-pci xhci-plat-hcd \ "=drivers/pinctrl" \ ${NULL} hostonly=$(optional_hostonly) instmods \ "=drivers/hid" \ "=drivers/tty/serial" \ "=drivers/input/serio" \ "=drivers/input/keyboard" \ "=drivers/usb/storage" \ "=drivers/pci/host" \ ${NULL} instmods \ yenta_socket \ atkbd i8042 usbhid firewire-ohci pcmcia hv-vmbus \ virtio virtio_ring virtio_pci virtio_scsi pci_hyperv \ "=drivers/pcmcia" if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then # arm/aarch64 specific modules _blockfuncs+='|dw_mc_probe|dw_mci_pltfm_register' instmods \ "=drivers/clk" \ "=drivers/dma" \ "=drivers/extcon" \ "=drivers/gpio" \ "=drivers/hwspinlock" \ "=drivers/i2c/busses" \ "=drivers/mfd" \ "=drivers/mmc/core" \ "=drivers/phy" \ "=drivers/power" \ "=drivers/regulator" \ "=drivers/rpmsg" \ "=drivers/rtc" \ "=drivers/soc" \ "=drivers/usb/chipidea" \ "=drivers/usb/dwc2" \ "=drivers/usb/dwc3" \ "=drivers/usb/host" \ "=drivers/usb/misc" \ "=drivers/usb/musb" \ "=drivers/usb/phy" \ "=drivers/scsi/hisi_sas" \ ${NULL} fi find_kernel_modules_external | instmods if ! [[ $hostonly ]] || for_each_host_dev_and_slaves is_block_dev; then install_block_modules fi # if not on hostonly mode, install all known filesystems, # if the required list is not set via the filesystems variable if ! [[ $hostonly ]]; then if [[ -z $filesystems ]]; then dracut_instmods -o -P ".*/(kernel/fs/nfs|kernel/fs/nfsd|kernel/fs/lockd)/.*" '=fs' fi elif [[ "${host_fs_types[*]}" ]]; then hostonly='' instmods "${host_fs_types[@]}" fi fi : } # called by dracut install() { inst_multiple -o /lib/modprobe.d/*.conf [[ $hostonly ]] && inst_multiple -H -o /etc/modprobe.d/*.conf /etc/modprobe.conf if ! dracut_module_included "systemd"; then inst_hook cmdline 01 "$moddir/parse-kernel.sh" fi inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh } modules.d/90kernel-modules/insmodpost.sh 0000755 00000000301 15053306611 0014265 0 ustar 00 #!/bin/sh . /lib/dracut-lib.sh for modlist in $(getargs rd.driver.post -d rdinsmodpost=); do ( IFS=, for m in $modlist; do modprobe $m done ) done modules.d/95fcoe/lldpad.sh 0000755 00000000730 15053306611 0011327 0 ustar 00 #!/bin/bash if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then info "rd.fcoe=0: skipping lldpad activation" return 0 fi # Note lldpad will stay running after switchroot, the system initscripts # are to kill it and start a new lldpad to take over. Data is transfered # between the 2 using a shm segment lldpad -d # wait for lldpad to be ready i=0 while [ $i -lt 60 ]; do lldptool -p && break info "Waiting for lldpad to be ready" sleep 1 i=$(($i+1)) done modules.d/95fcoe/parse-fcoe.sh 0000755 00000003766 15053306611 0012127 0 ustar 00 #!/bin/sh # # Supported formats: # fcoe=<networkdevice>:<dcb|nodcb>:<fabric|vn2vn> # fcoe=<macaddress>:<dcb|nodcb>:<fabric|vn2vn> # # Note currently only nodcb is supported, the dcb option is reserved for # future use. # # Note letters in the macaddress must be lowercase! # # Examples: # fcoe=eth0:nodcb:vn2vn # fcoe=4a:3f:4c:04:f8:d7:nodcb:fabric if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then info "rd.fcoe=0: skipping fcoe" return 0 fi [ -z "$fcoe" ] && fcoe=$(getarg fcoe=) # If it's not set we don't continue [ -z "$fcoe" ] && return [ -e /sys/bus/fcoe/ctlr_create ] || modprobe -b -a fcoe || modprobe -b -a libfcoe || die "FCoE requested but kernel/initrd does not support FCoE" initqueue --onetime modprobe -b -q bnx2fc parse_fcoe_opts() { local OLDIFS="$IFS" local IFS=: set $fcoe IFS="$OLDIFS" case $# in 2) fcoe_interface=$1 fcoe_dcb=$2 fcoe_mode="fabric" return 0 ;; 3) fcoe_interface=$1 fcoe_dcb=$2 fcoe_mode=$3 return 0 ;; 7) fcoe_mac=$1:$2:$3:$4:$5:$6 fcoe_dcb=$7 fcoe_mode="fabric" return 0 ;; 8) fcoe_mac=$1:$2:$3:$4:$5:$6 fcoe_dcb=$7 fcoe_mode=$8 return 0 ;; *) warn "Invalid arguments for fcoe=$fcoe" return 1 ;; esac } parse_fcoe_opts if [ "$fcoe_interface" = "edd" ]; then if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then warn "Invalid FCoE DCB option: $fcoe_dcb" fi /sbin/initqueue --settled --unique /sbin/fcoe-edd $fcoe_dcb else for fcoe in $(getargs fcoe=); do unset fcoe_mac unset fcoe_interface parse_fcoe_opts if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then warn "Invalid FCoE DCB option: $fcoe_dcb" fi . $(command -v fcoe-genrules.sh) done fi modules.d/95fcoe/stop-fcoe.sh 0000755 00000000157 15053306611 0011771 0 ustar 00 #!/bin/bash for f in /sys/bus/fcoe/devices/ctlr_* ; do [ -e $f ] || continue echo 0 > $f/enabled done modules.d/95fcoe/cleanup-fcoe.sh 0000755 00000001040 15053306611 0012423 0 ustar 00 #!/bin/sh # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- # ex: ts=8 sw=4 sts=4 et filetype=sh if [ -e /var/run/lldpad.pid ]; then lldpad -k # with systemd version 230, this is not necessary anymore # systemd commit cacf980ed44a28e276a6cc7f8fc41f991e2ab354 if [ -z "$DRACUT_SYSTEMD" ]; then mkdir -m 0755 -p /run/initramfs/state/dev/shm cp /dev/shm/lldpad.state /run/initramfs/state/dev/shm/ > /dev/null 2>&1 echo "files /dev/shm/lldpad.state" >> /run/initramfs/rwtab fi fi modules.d/95fcoe/fcoe-up.sh 0000755 00000004743 15053306611 0011435 0 ustar 00 #!/bin/sh # # We get called like this: # fcoe-up <network-device> <dcb|nodcb> <fabric|vn2vn> # # Note currently only nodcb is supported, the dcb option is reserved for # future use. PATH=/usr/sbin:/usr/bin:/sbin:/bin type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh # Huh? Missing arguments ?? [ -z "$1" -o -z "$2" ] && exit 1 netif=$1 dcb=$2 mode=$3 vlan="yes" iflink=$(cat /sys/class/net/$netif/iflink) ifindex=$(cat /sys/class/net/$netif/ifindex) if [ "$iflink" != "$ifindex" ] ; then # Skip VLAN devices exit 0 fi ip link set dev $netif up linkup "$netif" # Some fcoemon implementations expect --syslog=true syslogopt="--syslog" if fcoemon -h|grep syslog|grep -q yes; then fcoemonyes="$syslogopt=yes" fi netdriver=$(readlink -f /sys/class/net/$netif/device/driver) netdriver=${netdriver##*/} write_fcoemon_cfg() { [ -f /etc/fcoe/cfg-$netif ] && return echo FCOE_ENABLE=\"yes\" > /etc/fcoe/cfg-$netif if [ "$dcb" = "dcb" ]; then echo DCB_REQUIRED=\"yes\" >> /etc/fcoe/cfg-$netif else echo DCB_REQUIRED=\"no\" >> /etc/fcoe/cfg-$netif fi if [ "$vlan" = "yes" ]; then echo AUTO_VLAN=\"yes\" >> /etc/fcoe/cfg-$netif else echo AUTO_VLAN=\"no\" >> /etc/fcoe/cfg-$netif fi if [ "$mode" = "vn2vn" ] ; then echo MODE=\"vn2vn\" >> /etc/fcoe/cfg-$netif else echo MODE=\"fabric\" >> /etc/fcoe/cfg-$netif fi } if [ "$netdriver" = "bnx2x" ]; then # If driver is bnx2x, do not use /sys/module/fcoe/parameters/create but fipvlan modprobe 8021q udevadm settle --timeout=30 # Sleep for 13 s to allow dcb negotiation sleep 13 fipvlan "$netif" -c -s need_shutdown exit fi if [ "$dcb" = "dcb" ]; then # wait for lldpad to be ready i=0 while [ $i -lt 60 ]; do lldptool -p && break info "Waiting for lldpad to be ready" sleep 1 i=$(($i+1)) done while [ $i -lt 60 ]; do dcbtool sc "$netif" dcb on && break info "Retrying to turn dcb on" sleep 1 i=$(($i+1)) done while [ $i -lt 60 ]; do dcbtool sc "$netif" pfc e:1 a:1 w:1 && break info "Retrying to turn dcb on" sleep 1 i=$(($i+1)) done while [ $i -lt 60 ]; do dcbtool sc "$netif" app:fcoe e:1 a:1 w:1 && break info "Retrying to turn fcoe on" sleep 1 i=$(($i+1)) done sleep 1 fi write_fcoemon_cfg fcoemon $syslogopt need_shutdown modules.d/95fcoe/fcoe-genrules.sh 0000755 00000002264 15053306611 0012631 0 ustar 00 #!/bin/sh # We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh # If neither mac nor interface are set we don't continue [ -z "$fcoe_interface" -a -z "$fcoe_mac" ] && return # Write udev rules { if [ -n "$fcoe_mac" ] ; then printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode" printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode" else printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode" printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode" fi } >> /etc/udev/rules.d/92-fcoe.rules modules.d/95fcoe/module-setup.sh 0000755 00000006534 15053306611 0012522 0 ustar 00 #!/bin/bash # called by dracut check() { is_fcoe() { block_is_fcoe $1 || return 1 } [[ $hostonly ]] || [[ $mount_needs ]] && { for_each_host_dev_and_slaves is_fcoe || return 255 } require_binaries dcbtool fipvlan lldpad ip readlink fcoemon fcoeadm || return 1 return 0 } # called by dracut depends() { echo network rootfs-block return 0 } # called by dracut installkernel() { instmods fcoe libfcoe 8021q edd bnx2fc } get_vlan_parent() { local link=$1 [ -d $link ] || return read iflink < $link/iflink for if in /sys/class/net/* ; do read idx < $if/ifindex if [ $idx -eq $iflink ] ; then echo ${if##*/} fi done } # called by dracut cmdline() { { for c in /sys/bus/fcoe/devices/ctlr_* ; do [ -L $c ] || continue read enabled < $c/enabled read mode < $c/mode [ $enabled -eq 0 ] && continue if [ $mode = "VN2VN" ] ; then mode="vn2vn" else mode="fabric" fi d=$(cd -P $c; echo $PWD) i=${d%/*} ifname=${i##*/} read mac < ${i}/address s=$(dcbtool gc ${i##*/} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p') if [ -z "$s" ] ; then p=$(get_vlan_parent ${i}) if [ "$p" ] ; then s=$(dcbtool gc ${p} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p') ifname=${p##*/} fi fi if [ "$s" = "on" ] ; then dcb="dcb" else dcb="nodcb" fi # Some Combined Network Adapters(CNAs) implement DCB in firmware. # Do not run software-based DCB or LLDP on CNAs that implement DCB. # If the network interface provides hardware DCB/DCBX capabilities, # DCB_REQUIRED in "/etc/fcoe/cfg-xxx" is expected to set to "no". # # Force "nodcb" if there's any DCB_REQUIRED="no"(child or vlan parent). grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${i##*/} &>/dev/null [ $? -eq 0 ] && dcb="nodcb" if [ "$p" ] ; then grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${p} &>/dev/null [ $? -eq 0 ] && dcb="nodcb" fi echo "ifname=${ifname}:${mac}" echo "fcoe=${ifname}:${dcb}:${mode}" done } | sort | uniq } # called by dracut install() { inst_multiple ip dcbtool fipvlan lldpad readlink lldptool fcoemon fcoeadm if [ -e "/etc/hba.conf" ]; then inst_libdir_file 'libhbalinux.so*' inst_simple "/etc/hba.conf" fi mkdir -m 0755 -p "$initdir/var/lib/lldpad" mkdir -m 0755 -p "$initdir/etc/fcoe" if [[ $hostonly_cmdline == "yes" ]] ; then local _fcoeconf=$(cmdline) [[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf" fi inst_multiple /etc/fcoe/cfg-* inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up" inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd" inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh" inst_hook pre-trigger 03 "$moddir/lldpad.sh" inst_hook cmdline 99 "$moddir/parse-fcoe.sh" inst_hook cleanup 90 "$moddir/cleanup-fcoe.sh" inst_hook shutdown 40 "$moddir/stop-fcoe.sh" dracut_need_initqueue } modules.d/95fcoe/fcoe-edd.sh 0000755 00000002212 15053306611 0011532 0 ustar 00 #!/bin/sh dcb="$1" _modprobe_r_edd="0" check_edd() { local cnt=0 [ -d /sys/firmware/edd ] && return 0 _modprobe_r_edd="1" modprobe edd || return $? while [ $cnt -lt 600 ]; do [ -d /sys/firmware/edd ] && return 0 cnt=$(($cnt+1)) sleep 0.1 done return 1 } check_edd || exit 1 for disk in /sys/firmware/edd/int13_*; do [ -d "$disk" ] || continue if [ -e "${disk}/pci_dev/driver" ]; then driver=$(readlink "${disk}/pci_dev/driver") driver=${driver##*/} fi # i40e uses dev_port 1 for a virtual fcoe function if [ "${driver}" = "i40e" ]; then dev_port=1 fi for nic in "${disk}"/pci_dev/net/*; do [ -d "$nic" ] || continue if [ -n "${dev_port}" -a -e "${nic}/dev_port" ]; then if [ "$(cat ${nic}/dev_port)" -ne "${dev_port}" ]; then continue fi fi if [ -e ${nic}/address ]; then fcoe_interface=${nic##*/} if ! [ -e "/tmp/.fcoe-$fcoe_interface" ]; then /sbin/fcoe-up "$fcoe_interface" "$dcb" > "/tmp/.fcoe-$fcoe_interface" fi fi done done [ "$_modprobe_r_edd" = "1" ] && modprobe -r edd unset _modprobe_r_edd modules.d/95rootfs-block/block-genrules.sh 0000755 00000000725 15053306611 0014477 0 ustar 00 #!/bin/sh if [ "${root%%:*}" = "block" ]; then { printf 'KERNEL=="%s", SYMLINK+="root"\n' \ ${root#block:/dev/} printf 'SYMLINK=="%s", SYMLINK+="root"\n' \ ${root#block:/dev/} } >> /etc/udev/rules.d/99-root.rules printf '[ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }\n' \ "${root#block:}" "${root#block:}" > $hookdir/initqueue/settled/blocksymlink.sh wait_for_dev "${root#block:}" fi modules.d/95rootfs-block/mount-root.sh 0000755 00000010506 15053306611 0013704 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh mount_root() { local _ret local _rflags_ro # sanity - determine/fix fstype rootfs=$(det_fs "${root#block:}" "$fstype") journaldev=$(getarg "root.journaldev=") if [ -n "$journaldev" ]; then case "$rootfs" in xfs) rflags="${rflags:+${rflags},}logdev=$journaldev" ;; reiserfs) fsckoptions="-j $journaldev $fsckoptions" rflags="${rflags:+${rflags},}jdev=$journaldev" ;; *);; esac fi _rflags_ro="$rflags,ro" _rflags_ro="${_rflags_ro##,}" while ! mount -t ${rootfs} -o "$_rflags_ro" "${root#block:}" "$NEWROOT"; do warn "Failed to mount -t ${rootfs} -o $_rflags_ro ${root#block:} $NEWROOT" fsck_ask_err done READONLY= fsckoptions= if [ -f "$NEWROOT"/etc/sysconfig/readonly-root ]; then . "$NEWROOT"/etc/sysconfig/readonly-root fi if getargbool 0 "readonlyroot=" -y readonlyroot; then READONLY=yes fi if getarg noreadonlyroot ; then READONLY=no fi if [ -f "$NEWROOT"/fastboot ] || getargbool 0 fastboot ; then fastboot=yes fi if ! getargbool 0 rd.skipfsck; then if [ -f "$NEWROOT"/fsckoptions ]; then fsckoptions=$(cat "$NEWROOT"/fsckoptions) fi if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then fsckoptions="-f $fsckoptions" elif [ -f "$NEWROOT"/.autofsck ]; then [ -f "$NEWROOT"/etc/sysconfig/autofsck ] && \ . "$NEWROOT"/etc/sysconfig/autofsck if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then AUTOFSCK_OPT="$AUTOFSCK_OPT -f" fi if [ -n "$AUTOFSCK_SINGLEUSER" ]; then warn "*** Warning -- the system did not shut down cleanly. " warn "*** Dropping you to a shell; the system will continue" warn "*** when you leave the shell." emergency_shell fi fsckoptions="$AUTOFSCK_OPT $fsckoptions" fi fi rootopts= if getargbool 1 rd.fstab -d -n rd_NO_FSTAB \ && ! getarg rootflags \ && [ -f "$NEWROOT/etc/fstab" ] \ && ! [ -L "$NEWROOT/etc/fstab" ]; then # if $NEWROOT/etc/fstab contains special mount options for # the root filesystem, # remount it with the proper options rootopts="defaults" while read dev mp fs opts dump fsck || [ -n "$dev" ]; do # skip comments [ "${dev%%#*}" != "$dev" ] && continue if [ "$mp" = "/" ]; then # sanity - determine/fix fstype rootfs=$(det_fs "${root#block:}" "$fs") rootopts=$opts rootfsck=$fsck break fi done < "$NEWROOT/etc/fstab" fi # we want rootflags (rflags) to take precedence so prepend rootopts to # them rflags="${rootopts},${rflags}" rflags="${rflags#,}" rflags="${rflags%,}" # backslashes are treated as escape character in fstab # esc_root=$(echo ${root#block:} | sed 's,\\,\\\\,g') # printf '%s %s %s %s 1 1 \n' "$esc_root" "$NEWROOT" "$rootfs" "$rflags" >/etc/fstab ran_fsck=0 if fsck_able "$rootfs" && \ [ "$rootfsck" != "0" -a -z "$fastboot" -a "$READONLY" != "yes" ] && \ ! strstr "${rflags}" _netdev && \ ! getargbool 0 rd.skipfsck; then umount "$NEWROOT" fsck_single "${root#block:}" "$rootfs" "$rflags" "$fsckoptions" _ret=$? ran_fsck=1 fi echo "${root#block:} $NEWROOT $rootfs ${rflags:-defaults} 0 $rootfsck" >> /etc/fstab if ! ismounted "$NEWROOT"; then info "Mounting ${root#block:} with -o ${rflags}" mount "$NEWROOT" 2>&1 | vinfo elif ! are_lists_eq , "$rflags" "$_rflags_ro" defaults; then info "Remounting ${root#block:} with -o ${rflags}" mount -o remount "$NEWROOT" 2>&1 | vinfo fi if ! getargbool 0 rd.skipfsck; then [ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null [ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null fi } if [ -n "$root" -a -z "${root%%block:*}" ]; then mount_root fi modules.d/95rootfs-block/parse-block.sh 0000755 00000001634 15053306611 0013765 0 ustar 00 #!/bin/sh case "$root" in block:LABEL=*|LABEL=*) root="${root#block:}" root="$(echo $root | sed 's,/,\\x2f,g')" root="block:/dev/disk/by-label/${root#LABEL=}" rootok=1 ;; block:UUID=*|UUID=*) root="${root#block:}" root="${root#UUID=}" root="$(echo $root | tr "[:upper:]" "[:lower:]")" root="block:/dev/disk/by-uuid/${root#UUID=}" rootok=1 ;; block:PARTUUID=*|PARTUUID=*) root="${root#block:}" root="${root#PARTUUID=}" root="$(echo $root | tr "[:upper:]" "[:lower:]")" root="block:/dev/disk/by-partuuid/${root}" rootok=1 ;; block:PARTLABEL=*|PARTLABEL=*) root="${root#block:}" root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}" rootok=1 ;; /dev/*) root="block:${root}" rootok=1 ;; esac [ "${root%%:*}" = "block" ] && wait_for_dev "${root#block:}" modules.d/95rootfs-block/rootfallback.sh 0000755 00000002332 15053306611 0014222 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh for root in $(getargs rootfallback=); do case "$root" in block:LABEL=*|LABEL=*) root="${root#block:}" root="$(echo $root | sed 's,/,\\x2f,g')" root="/dev/disk/by-label/${root#LABEL=}" ;; block:UUID=*|UUID=*) root="${root#block:}" root="${root#UUID=}" root="$(echo $root | tr "[:upper:]" "[:lower:]")" root="/dev/disk/by-uuid/${root#UUID=}" ;; block:PARTUUID=*|PARTUUID=*) root="${root#block:}" root="${root#PARTUUID=}" root="$(echo $root | tr "[:upper:]" "[:lower:]")" root="/dev/disk/by-partuuid/${root}" ;; block:PARTLABEL=*|PARTLABEL=*) root="${root#block:}" root="/dev/disk/by-partlabel/${root#PARTLABEL=}" ;; esac if ! [ -b "$root" ]; then warn "Could not find rootfallback $root" continue fi if mount "$root" /sysroot; then info "Mounted rootfallback $root" exit 0 else warn "Failed to mount rootfallback $root" exit 1 fi done [ -e "$job" ] && rm -f "$job" modules.d/95rootfs-block/module-setup.sh 0000755 00000004374 15053306611 0014212 0 ustar 00 #!/bin/bash # called by dracut check() { return 0 } # called by dracut depends() { echo fs-lib } cmdline_journal() { if [[ $hostonly ]]; then for dev in "${!host_fs_types[@]}"; do [[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue rootopts=$(find_dev_fsopts "$dev") if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then journaldev=$(fs_get_option $rootopts "jdev") elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then journaldev=$(fs_get_option $rootopts "logdev") fi if [ -n "$journaldev" ]; then printf " root.journaldev=%s" "$journaldev" fi done fi return 0 } cmdline_rootfs() { local _dev=/dev/block/$(find_root_block_device) local _fstype _flags _subvol # "--no-hostonly-default-device" can result in empty root_devs if [ "${#root_devs[@]}" -eq 0 ]; then return fi if [ -e $_dev ]; then printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$_dev")")" _fstype="$(find_mp_fstype /)" _flags="$(find_mp_fsopts /)" printf " rootfstype=%s" "$_fstype" if [[ $use_fstab != yes ]] && [[ $_fstype = btrfs ]]; then _subvol=$(findmnt -e -v -n -o FSROOT --target /) \ && _subvol=${_subvol#/} _flags="$_flags,${_subvol:+subvol=$_subvol}" fi printf " rootflags=%s" "${_flags#,}" fi } # called by dracut cmdline() { cmdline_rootfs cmdline_journal } # called by dracut install() { if [[ $hostonly_cmdline == "yes" ]]; then local _journaldev=$(cmdline_journal) [[ $_journaldev ]] && printf "%s\n" "$_journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf" local _rootdev=$(cmdline_rootfs) [[ $_rootdev ]] && printf "%s\n" "$_rootdev" >> "${initdir}/etc/cmdline.d/95root-dev.conf" fi inst_multiple umount inst_multiple tr if ! dracut_module_included "systemd"; then inst_hook cmdline 95 "$moddir/parse-block.sh" inst_hook pre-udev 30 "$moddir/block-genrules.sh" inst_hook mount 99 "$moddir/mount-root.sh" fi inst_hook initqueue/timeout 99 "$moddir/rootfallback.sh" } modules.d/98pollcdrom/pollcdrom.sh 0000755 00000001173 15053306611 0013146 0 ustar 00 #!/bin/sh # # Licensed under the GPLv2 # # Copyright 2008-2012, Red Hat, Inc. # Harald Hoyer <harald@redhat.com> if [ ! -e /sys/module/block/parameters/events_dfl_poll_msecs ]; then # if the kernel does not support autopolling # then we have to do a # dirty hack for some cdrom drives, # which report no medium for quiet # some time. for cdrom in /sys/block/sr*; do [ -e "$cdrom" ] || continue # skip, if cdrom medium was already found strstr "$(udevadm info --query=env --path=${cdrom##/sys})" \ ID_CDROM_MEDIA && continue echo change > "$cdrom/uevent" done fi modules.d/98pollcdrom/module-setup.sh 0000755 00000000307 15053306611 0013574 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { return 0 } # called by dracut install() { inst_hook initqueue/settled 99 "$moddir/pollcdrom.sh" } modules.d/99memstrack/memstrack-report.sh 0000755 00000000712 15053306611 0014444 0 ustar 00 #!/usr/bin/bash . /lib/dracut-lib.sh if ! [ "$DEBUG_MEM_LEVEL" -ge 4 ]; then return 0 fi if type -P systemctl >/dev/null; then systemctl stop memstrack.service else get_pid_of_tracer () { local _user _pid _rest read _user _pid _rest <<< $(ps aux | grep [m]emstrack | head -1) echo $_pid } kill -s INT $(get_pid_of_tracer) while [[ -n $(get_pid_of_tracer) ]]; do sleep 1 done fi cat /.memstrack modules.d/99memstrack/memstrack-start.sh 0000755 00000003416 15053306611 0014272 0 ustar 00 #!/bin/sh # Mount kernel debug fs so debug tools can work. # memdebug=4 and memdebug=5 requires debug fs to be mounted. # And there is no need to umount it. type getargnum >/dev/null 2>&1 || . /lib/dracut-lib.sh # "sys/kernel/tracing" has the priority if exists. get_trace_base() { # trace access through debugfs would be obsolete if "/sys/kernel/tracing" is available. if [ -d "/sys/kernel/tracing" ]; then echo "/sys/kernel" else echo "/sys/kernel/debug" fi } is_debugfs_ready() { [ -f "$(get_trace_base)/tracing/trace" ] } prepare_debugfs() { local trace_base trace_base=$(get_trace_base) # old debugfs interface case. if ! [ -d "$trace_base/tracing" ]; then mount none -t debugfs $trace_base # new tracefs interface case. elif ! [ -f "$trace_base/tracing/trace" ]; then mount none -t tracefs "$trace_base/tracing" fi if ! [ -f "$trace_base/tracing/trace" ]; then echo "WARN: failed to mount debugfs" return 1 fi } if ! is_debugfs_ready ; then prepare_debugfs fi if [ -n "$DEBUG_MEM_LEVEL" ]; then if [ "$DEBUG_MEM_LEVEL" -ge 5 ]; then echo "memstrack - will report kernel module memory usage summary and top allocation stack" memstrack --report module_summary,module_top --notui --throttle 80 -o /.memstrack & elif [ "$DEBUG_MEM_LEVEL" -ge 4 ]; then echo "memstrack - will report memory usage summary" memstrack --report module_summary --notui --throttle 80 -o /.memstrack & else exit 0; fi fi PID=$! RET=$? if [ $RET -ne 0 ]; then echo "Failed to start memstrack, exit status: $RET" exit $RET fi # Wait a second for memstrack to setup everything, avoid missing any event sleep 1 echo $PID > /run/memstrack.pid disown modules.d/99memstrack/memstrack.service 0000644 00000000502 15053306611 0014153 0 ustar 00 [Unit] Description=Memstrack Anylazing Service DefaultDependencies=no Before=dracut-cmdline.service systemd-udevd.service local-fs-pre.target IgnoreOnIsolate=true [Service] Type=simple ExecStart=/bin/memstrack-start PIDFile=/run/memstrack.pid StandardInput=null StandardOutput=syslog+console StandardError=syslog+console modules.d/99memstrack/module-setup.sh 0000755 00000001160 15053306611 0013566 0 ustar 00 #!/usr/bin/bash check() { if find_binary memstrack >/dev/null; then dinfo "memstrack is available" return 0 fi dinfo "memstrack is not available" dinfo "If you need to use rd.memdebug>=4, please install memstrack" return 1 } depends() { return 0 } install() { inst "/bin/memstrack" "/bin/memstrack" inst "$moddir/memstrack-start.sh" "/bin/memstrack-start" inst_hook cleanup 99 "$moddir/memstrack-report.sh" inst "$moddir/memstrack.service" "$systemdsystemunitdir/memstrack.service" systemctl -q --root "$initdir" add-wants initrd.target memstrack.service } modules.d/98ecryptfs/ecryptfs-mount.sh 0000755 00000005266 15053306611 0014025 0 ustar 00 #!/bin/sh # Licensed under the GPLv2 # # Copyright (C) 2011 Politecnico di Torino, Italy # TORSEC group -- http://security.polito.it # Roberto Sassu <roberto.sassu@polito.it> ECRYPTFSCONFIG="${NEWROOT}/etc/sysconfig/ecryptfs" ECRYPTFSKEYTYPE="encrypted" ECRYPTFSKEYDESC="1000100010001000" ECRYPTFSKEYID="" ECRYPTFSSRCDIR="/secret" ECRYPTFS_EXTRA_MOUNT_OPTS="" load_ecryptfs_key() { # override the eCryptfs key path name from the 'ecryptfskey=' parameter in the kernel # command line ECRYPTFSKEYARG=$(getarg ecryptfskey=) [ $? -eq 0 ] && \ ECRYPTFSKEY=${ECRYPTFSKEYARG} # set the default value [ -z "${ECRYPTFSKEY}" ] && \ ECRYPTFSKEY="/etc/keys/ecryptfs-trusted.blob"; # set the eCryptfs key path name ECRYPTFSKEYPATH="${NEWROOT}${ECRYPTFSKEY}" # check for eCryptfs encrypted key's existence if [ ! -f "${ECRYPTFSKEYPATH}" ]; then if [ "${RD_DEBUG}" = "yes" ]; then info "eCryptfs: key file not found: ${ECRYPTFSKEYPATH}" fi return 1 fi # read the eCryptfs encrypted key blob KEYBLOB=$(cat ${ECRYPTFSKEYPATH}) # load the eCryptfs encrypted key blob ECRYPTFSKEYID=$(keyctl add ${ECRYPTFSKEYTYPE} ${ECRYPTFSKEYDESC} "load ${KEYBLOB}" @u) [ $? -eq 0 ] || { info "eCryptfs: failed to load the eCryptfs key: ${ECRYPTFSKEYDESC}"; return 1; } return 0 } unload_ecryptfs_key() { # unlink the eCryptfs encrypted key keyctl unlink ${ECRYPTFSKEYID} @u || { info "eCryptfs: failed to unlink the eCryptfs key: ${ECRYPTFSKEYDESC}"; return 1; } return 0 } mount_ecryptfs() { # read the configuration from the config file [ -f "${ECRYPTFSCONFIG}" ] && \ . ${ECRYPTFSCONFIG} # load the eCryptfs encrypted key load_ecryptfs_key || return 1 # set the default value for ECRYPTFSDSTDIR [ -z "${ECRYPTFSDSTDIR}" ] && \ ECRYPTFSDSTDIR=${ECRYPTFSSRCDIR} # set the eCryptfs filesystem mount point ECRYPTFSSRCMNT="${NEWROOT}${ECRYPTFSSRCDIR}" ECRYPTFSDSTMNT="${NEWROOT}${ECRYPTFSDSTDIR}" # build the mount options variable ECRYPTFS_MOUNT_OPTS="ecryptfs_sig=${ECRYPTFSKEYDESC}" [ ! -z "${ECRYPTFS_EXTRA_MOUNT_OPTS}" ] && \ ECRYPTFS_MOUNT_OPTS="${ECRYPTFS_MOUNT_OPTS},${ECRYPTFS_EXTRA_MOUNT_OPTS}" # mount the eCryptfs filesystem info "Mounting the configured eCryptfs filesystem" mount -i -t ecryptfs -o${ECRYPTFS_MOUNT_OPTS} ${ECRYPTFSSRCMNT} ${ECRYPTFSDSTMNT} >/dev/null || { info "eCryptfs: mount of the eCryptfs filesystem failed"; return 1; } # unload the eCryptfs encrypted key unload_ecryptfs_key || return 1 return 0 } mount_ecryptfs modules.d/98ecryptfs/README 0000644 00000004447 15053306611 0011347 0 ustar 00 # Directions for creating the encrypted key that will be used to mount an # eCryptfs filesystem # Create the eCryptfs key (encrypted key type) # # The encrypted key type supports two formats: the 'default' format allows # to generate a random symmetric key of the length specified, the 'ecryptfs' # format generates an authentication token for the eCryptfs filesystem, # which contains a randomly generated key. Two requirements for the latter # format is that the key description must contain exactly 16 hexadecimal # characters and that the encrypted key length must be equal to 64. $ keyctl add encrypted 1000100010001000 "new ecryptfs trusted:kmk-trusted 64" @u 782117972 # Save the encrypted key $ su -c 'keyctl pipe `keyctl search @u encrypted 1000100010001000` > /etc/keys/ecryptfs-trusted.blob' # The eCryptfs key path name can be set in one of the following ways (specified in # the order in which the variable is overwritten): 1) use the default value: -------------------------------------------------------------------------- ECRYPTFSKEY="/etc/keys/ecryptfs-trusted.blob" -------------------------------------------------------------------------- 2) create the configuration file '/etc/sysconfig/ecryptfs' and set the ECRYPTFSKEY variable; 3) specify the eCryptfs key path name in the 'ecryptfskey=' parameter of the kernel command line. # The configuration file '/etc/sysconfig/ecryptfs' is also used to specify # more options for mounting the eCryptfs filesystem: ECRYPTFSSRCDIR: existent directory in the lower root filesystem; ECRYPTFSDSTDIR: mount point directory for the eCryptfs filesystem (the directory must be created in the root filesystem before rebooting the platform); ECRYPTFS_EXTRA_MOUNT_OPTS: extra mount options for the eCryptfs filesystem (the 'ecryptfs_sig' option is automatically added by the dracut script). # Example of the configuration file: ----------- '/etc/sysconfig/ecryptfs' (with default values) ----------- ECRYPTFS_KEY="/etc/keys/ecryptfs-trusted.blob" ECRYPTFSSRCDIR="/secret" ECRYPTFSDSTDIR="${ECRYPTFSSRCDIR}" ECRYPTFS_EXTRA_MOUNT_OPTS="" ----------------------------------------------------------------------- # If the variable ECRYPTFSDSTDIR is not specified in the configuration file, # its value will be equal to that of ECRYPTFSSRCDIR. modules.d/98ecryptfs/module-setup.sh 0000755 00000000424 15053306611 0013440 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { echo masterkey return 0 } # called by dracut installkernel() { instmods ecryptfs } # called by dracut install() { inst_hook pre-pivot 63 "$moddir/ecryptfs-mount.sh" } modules.d/80lvmthinpool-monitor/start-thinpool-monitor.sh 0000755 00000002402 15053306611 0017657 0 ustar 00 #!/bin/sh type getarg > /dev/null 2>&1 || . /lib/dracut-lib.sh LVS=$(getargs rd.lvm.lv -d rd_LVM_LV=) is_lvm2_thinp_device() { _device_path=$1 _lvm2_thin_device=$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \ --nosuffix --noheadings -o vg_name,lv_name "$_device_path" 2> /dev/null) [ -n "$_lvm2_thin_device" ] && return $? } for LV in $LVS; do if is_lvm2_thinp_device "/dev/$LV"; then THIN_POOLS="$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \ --nosuffix --noheadings -o vg_name,pool_lv "$LV" \ | awk '{printf("%s/%s",$1,$2);}') $THIN_POOLS" fi done THIN_POOLS=$(echo "$THIN_POOLS" | tr ' ' '\n' | sort -u | tr '\n' ' ') if [ -n "$THIN_POOLS" ]; then if [ -e "/etc/lvm/lvm.conf" ]; then # Use 'monitoring=0' to override the value in lvm.conf, in case # dmeventd monitoring been started after the calling. CONFIG="activation {monitoring=0}" else CONFIG="activation {monitoring=0 thin_pool_autoextend_threshold=70 thin_pool_autoextend_percent=20}" fi while true; do for THIN_POOL in $THIN_POOLS; do lvm lvextend --use-policies --config "$CONFIG" "$THIN_POOL" done sleep 5 done & echo $! > /run/thinpool-moni.pid fi modules.d/80lvmthinpool-monitor/start-thinpool-monitor.service 0000644 00000000506 15053306611 0020705 0 ustar 00 [Unit] Description=Lvm thinpool monitor service Before=initrd.target After=initrd-fs.target Conflicts=shutdown.target emergency.target [Service] Type=forking ExecStart=/bin/start-thinpool-monitor PIDFile=/run/thinpool-moni.pid StandardInput=null StandardOutput=journal+console StandardError=journal+console KillSignal=SIGHUP modules.d/80lvmthinpool-monitor/module-setup.sh 0000755 00000001100 15053306611 0015620 0 ustar 00 #!/bin/bash # called by dracut check() { # No point trying to support lvm if the binaries are missing require_binaries lvm sort tr awk || return 1 return 255 } # called by dracut depends() { echo lvm return 0 } # called by dracut install() { inst_multiple sort tr awk inst_script "$moddir/start-thinpool-monitor.sh" "/bin/start-thinpool-monitor" inst "$moddir/start-thinpool-monitor.service" "$systemdsystemunitdir/start-thinpool-monitor.service" systemctl -q --root "$initdir" add-wants initrd.target start-thinpool-monitor.service } modules.d/01systemd-initrd/module-setup.sh 0000755 00000003451 15053306611 0014543 0 ustar 00 #!/bin/bash # called by dracut check() { [[ $mount_needs ]] && return 1 if ! dracut_module_included "systemd"; then derror "systemd-initrd needs systemd in the initramfs" return 1 fi return 0 } # called by dracut depends() { echo "systemd" } installkernel() { return 0 } # called by dracut install() { local _mods inst_multiple -o \ $systemdsystemunitdir/initrd.target \ $systemdsystemunitdir/initrd-fs.target \ $systemdsystemunitdir/initrd-root-device.target \ $systemdsystemunitdir/initrd-root-fs.target \ $systemdsystemunitdir/initrd-switch-root.target \ $systemdsystemunitdir/initrd-switch-root.service \ $systemdsystemunitdir/initrd-cleanup.service \ $systemdsystemunitdir/initrd-udevadm-cleanup-db.service \ $systemdsystemunitdir/initrd-parse-etc.service systemctl -q --root "$initdir" set-default initrd.target local VERSION="" local PRETTY_NAME="" if [ -e /etc/os-release ]; then . /etc/os-release [[ -n ${VERSION} ]] && VERSION+=" " [[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" " fi NAME=dracut ID=dracut VERSION+="dracut-$DRACUT_VERSION" PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)" VERSION_ID=$DRACUT_VERSION ANSI_COLOR="0;34" { echo NAME=\"$NAME\" echo VERSION=\"$VERSION\" echo ID=$ID echo VERSION_ID=$VERSION_ID echo PRETTY_NAME=\"$PRETTY_NAME\" echo ANSI_COLOR=\"$ANSI_COLOR\" } > $initdir/usr/lib/initrd-release echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release ln -sf initrd-release $initdir/usr/lib/os-release ln -sf initrd-release $initdir/etc/os-release } modules.d/95debug/module-setup.sh 0000755 00000001046 15053306611 0012665 0 ustar 00 #!/bin/bash # called by dracut check() { # do not add this module by default return 255 } # called by dracut depends() { return 0 } # called by dracut install() { inst_multiple -o cat ls ps grep more cat rm strace free showmount \ ping netstat rpcinfo vi scp ping6 ssh find vi \ tcpdump cp less hostname mkdir systemd-analyze \ fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck grep '^tcpdump:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd" } modules.d/40network/dhcp-root.sh 0000755 00000001460 15053306611 0012532 0 ustar 00 #!/bin/sh # This script is sourced, so root should be set. But let's be paranoid [ -z "$root" ] && root=$(getarg root=) if [ -z "$netroot" ]; then for netroot in $(getargs netroot=); do [ "$netroot" = "dhcp" ] && break [ "$netroot" = "dhcp6" ] && break done [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot fi if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then # Tell ip= checker that we need dhcp NEEDDHCP="1" # Done, all good! rootok=1 if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then netroot=$root fi # Shut up init error check [ -z "$root" ] && root="dhcp" echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > $hookdir/initqueue/finished/dhcp.sh fi modules.d/40network/netroot.sh 0000755 00000005165 15053306611 0012333 0 ustar 00 #!/bin/sh PATH=/usr/sbin:/usr/bin:/sbin:/bin command -v getarg >/dev/null || . /lib/dracut-lib.sh command -v setup_net >/dev/null || . /lib/net-lib.sh # Huh? Empty $1? [ -z "$1" ] && exit 1 # [ ! -z $2 ] means this is for manually bringing up network # instead of real netroot; If It's called without $2, then there's # no sense in doing something if no (net)root info is available # or root is already there [ -d $NEWROOT/proc ] && exit 0 if [ -z "$netroot" ]; then netroot=$(getarg netroot=) fi [ -z "$netroot" ] && exit 1 # Set or override primary interface netif=$1 [ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev case "$netif" in ??:??:??:??:??:??) # MAC address for i in /sys/class/net/*/address; do mac=$(cat $i) if [ "$mac" = "$netif" ]; then i=${i%/address} netif=${i##*/} break fi done esac # Figure out the handler for root=dhcp by recalling all netroot cmdline # handlers when this is not called from manually network bringing up. if [ -z "$2" ]; then if getarg "root=dhcp" || getarg "netroot=dhcp" || getarg "root=dhcp6" || getarg "netroot=dhcp6"; then # Load dhcp options [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts # If we have a specific bootdev with no dhcpoptions or empty root-path, # we die. Otherwise we just warn if [ -z "$new_root_path" ] ; then [ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'" warn "No dhcp root-path received for '$netif' trying other interfaces if available" exit 1 fi rm -f -- $hookdir/initqueue/finished/dhcp.sh # Set netroot to new_root_path, so cmdline parsers don't call netroot=$new_root_path # FIXME! unset rootok for f in $hookdir/cmdline/90*.sh; do [ -f "$f" ] && . "$f"; done else rootok="1" fi # Check: do we really know how to handle (net)root? [ -z "$root" ] && die "No or empty root= argument" [ -z "$rootok" ] && die "Don't know how to handle 'root=$root'" handler=${netroot%%:*} handler=${handler%%4} handler=$(command -v ${handler}root) if [ -z "$netroot" ] || [ ! -e "$handler" ] ; then die "No handler for netroot type '$netroot'" fi fi # Source netroot hooks before we start the handler source_hook netroot $netif # Run the handler; don't store the root, it may change from device to device # XXX other variables to export? [ -n "$handler" ] && "$handler" "$netif" "$netroot" "$NEWROOT" save_netinfo $netif exit 0 modules.d/40network/ifname-genrules.sh 0000755 00000002137 15053306611 0013716 0 ustar 00 #!/bin/sh # if there are no ifname parameters, just use NAME=KERNEL if ! getarg ifname= >/dev/null ; then return fi command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh { for p in $(getargs ifname=); do parse_ifname_opts $p if [ -f /tmp/ifname-$ifname_mac ]; then read oldif < /tmp/ifname-$ifname_mac fi if [ -f /tmp/ifname-$ifname_if ]; then read oldmac < /tmp/ifname-$ifname_if fi if [ -n "$oldif" -a -n "$oldmac" -a "$oldif" = "$ifname_if" -a "$oldmac" = "$ifname_mac" ]; then # skip same ifname= declaration continue fi [ -n "$oldif" ] && warn "Multiple interface names specified for MAC $ifname_mac: $oldif" [ -n "$oldmac" ] && warn "Multiple MAC specified for $ifname_if: $oldmac" printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if" echo $ifname_if > /tmp/ifname-$ifname_mac echo $ifname_mac > /tmp/ifname-$ifname_if done } >> /etc/udev/rules.d/80-ifname.rules modules.d/40network/net-lib.sh 0000755 00000062135 15053306611 0012173 0 ustar 00 #!/bin/sh is_ip() { echo "$1" | { IFS=. read a b c d test "$a" -ge 0 -a "$a" -le 255 \ -a "$b" -ge 0 -a "$b" -le 255 \ -a "$c" -ge 0 -a "$c" -le 255 \ -a "$d" -ge 0 -a "$d" -le 255 \ 2> /dev/null } && return 0 return 1 } get_ip() { local iface="$1" ip="" ip=$(ip -o -f inet addr show $iface) ip=${ip%%/*} ip=${ip##* } echo $ip } iface_for_remote_addr() { set -- $(ip -o route get to $1) echo $5 } iface_for_ip() { set -- $(ip -o addr show to $1) echo $2 } iface_for_mac() { local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')" for interface in /sys/class/net/*; do if [ $(cat $interface/address) = "$mac" ]; then echo ${interface##*/} fi done } # get the iface name for the given identifier - either a MAC, IP, or iface name iface_name() { case $1 in ??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;; *:*:*|*.*.*.*) iface_for_ip $1 ;; *) echo $1 ;; esac } # list the configured interfaces configured_ifaces() { local IFACES="" iface_id="" rv=1 [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces if { pidof udevd || pidof systemd-udevd; } > /dev/null; then for iface_id in $IFACES; do echo $(iface_name $iface_id) rv=0 done else warn "configured_ifaces called before udev is running" echo $IFACES [ -n "$IFACES" ] && rv=0 fi return $rv } all_ifaces_up() { local iface="" IFACES="" [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces for iface in $IFACES; do [ -e /tmp/net.$iface.up ] || return 1 done } all_ifaces_setup() { local iface="" IFACES="" [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces for iface in $IFACES; do [ -e /tmp/net.$iface.did-setup ] || return 1 done } get_netroot_ip() { local prefix="" server="" rest="" splitsep "$1" ":" prefix server rest case $server in [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) echo "$server"; return 0 ;; esac return 1 } ip_is_local() { strstr "$(ip route get $1 2>/dev/null)" " via " } ifdown() { local netif="$1" # ip down/flush ensures that routing info goes away as well ip link set $netif down ip addr flush dev $netif echo "#empty" > /etc/resolv.conf rm -f -- /tmp/net.$netif.did-setup [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup # TODO: send "offline" uevent? } setup_net() { local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES="" local _p [ -e /tmp/net.$netif.did-setup ] && return [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return [ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces [ -z "$IFACES" ] && IFACES="$netif" # run the scripts written by ifup [ -e /tmp/net.$netif.hostname ] && . /tmp/net.$netif.hostname [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override [ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts # set up resolv.conf [ -e /tmp/net.$netif.resolv.conf ] && \ awk '!array[$0]++' /tmp/net.$netif.resolv.conf > /etc/resolv.conf [ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw # add static route for _p in $(getargs rd.route); do route_to_var "$_p" || continue [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"} if strstr "$route_mask" ":"; then printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \ > /tmp/net.route6."$netif" else printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \ > /tmp/net.route."$netif" fi done # If a static route was necessary to reach the gateway, the # first gateway setup call will have failed with # RTNETLINK answers: Network is unreachable # Replace the default route again after static routes to cover # this scenario. [ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw # Handle STP Timeout: arping the default gateway. # (or the root server, if a) it's local or b) there's no gateway.) # Note: This assumes that if no router is present the # root server is on the same subnet. # Get DHCP-provided router IP, or the cmdline-provided "gw=" argument [ -n "$new_routers" ] && gw_ip=${new_routers%%,*} [ -n "$gw" ] && gw_ip=$gw # Get the "netroot" IP (if there's an IP address in there) netroot_ip=$(get_netroot_ip $netroot) # try netroot if it's local (or there's no gateway) if ip_is_local $netroot_ip || [ -z "$gw_ip" ]; then dest="$netroot_ip" else dest="$gw_ip" fi unset layer2 if [ -f /sys/class/net/$netif/device/layer2 ]; then read layer2 < /sys/class/net/$netif/device/layer2 fi if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then if command -v arping2 >/dev/null; then arping2 -q -C 1 -c 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed" else arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed" fi fi unset layer2 > /tmp/net.$netif.did-setup [ -z "$DO_VLAN" ] && \ [ -e /sys/class/net/$netif/address ] && \ > /tmp/net.$(cat /sys/class/net/$netif/address).did-setup } save_netinfo() { local netif="$1" IFACES="" f="" i="" [ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces # Add $netif to the front of IFACES (if it's not there already). set -- "$netif" for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done IFACES="$*" for i in $IFACES; do for f in /tmp/dhclient.$i.*; do [ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.} done done echo $IFACES > /tmp/.net.ifaces.new mv /tmp/.net.ifaces.new /tmp/net.ifaces } set_ifname() { local name="$1" mac="$2" num=-1 n="" # if it's already set, return the existing name for n in $(getargs ifname=); do strstr "$n" "$mac" && echo ${n%%:*} && return done # otherwise, pick a new name and use that while :; do num=$(($num+1)); [ -e /sys/class/net/$name$num ] && continue for n in $(getargs ifname=); do [ "$name$num" = "${n%%:*}" ] && continue 2 done break done echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf echo "$name$num" } # pxelinux provides macaddr '-' separated, but we need ':' fix_bootif() { local macaddr=${1} local IFS='-' macaddr=$(printf '%s:' ${macaddr}) macaddr=${macaddr%:} # strip hardware type field from pxelinux [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:} # return macaddr with lowercase alpha characters expected by udev echo $macaddr | sed 'y/ABCDEF/abcdef/' } ibft_to_cmdline() { local iface="" modprobe -q iscsi_ibft ( for iface in /sys/firmware/ibft/ethernet*; do local mac="" dev="" local dhcp="" ip="" gw="" mask="" hostname="" local dns1 dns2 [ -e ${iface}/mac ] || continue mac=$(read a < ${iface}/mac; echo $a) [ -z "$mac" ] && continue dev=$(set_ifname ibft $mac) [ -e /tmp/net.${dev}.has_ibft_config ] && continue [ -e ${iface}/flags ] && flags=$(read a < ${iface}/flags; echo $a) # Skip invalid interfaces (( $flags & 1 )) || continue # Skip interfaces not used for booting unless using multipath if ! getargbool 0 rd.iscsi.mp ; then (( $flags & 2 )) || continue fi [ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a) [ -e ${iface}/origin ] && origin=$(read a < ${iface}/origin; echo $a) [ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a) if [ -n "$ip" ] ; then case "$ip" in *.*.*.*) family=ipv4 ;; *:*) family=ipv6 ;; esac fi if [ -n "$dhcp" ] || [ "$origin" -eq 3 ]; then if [ "$family" = "ipv6" ] ; then echo "ip=$dev:dhcp6" else echo "ip=$dev:dhcp" fi elif [ -e ${iface}/ip-addr ]; then # skip not assigned ip adresses [ "$ip" = "0.0.0.0" ] && continue [ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a) [ "$gateway" = "0.0.0.0" ] && unset $gateway [ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a) [ -e ${iface}/prefix-len ] && prefix=$(read a < ${iface}/prefix-len; echo $a) [ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a) [ "$dns1" = "0.0.0.0" ] && unset $dns1 [ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a) [ "$dns2" = "0.0.0.0" ] && unset $dns2 [ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a) if [ "$family" = "ipv6" ] ; then if [ -n "$ip" ] ; then ip="[$ip]" [ -n "$prefix" ] || prefix=64 ip="[${ip}/${prefix}]" mask= fi if [ -n "$gw" ] ; then gw="[${gw}]" fi fi if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}" else warn "${iface} does not contain a valid iBFT configuration" warn "ip-addr=$ip" warn "gateway=$gw" warn "subnet-mask=$mask" warn "hostname=$hostname" fi else info "${iface} does not contain a valid iBFT configuration" ls -l ${iface} | vinfo fi if [ -e ${iface}/vlan ]; then vlan=$(read a < ${iface}/vlan; echo $a) if [ "$vlan" -ne "0" ]; then case "$vlan" in [0-9]*) echo "vlan=$dev.$vlan:$dev" echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config ;; *) echo "vlan=$vlan:$dev" echo $mac > /tmp/net.${vlan}.has_ibft_config ;; esac else echo $mac > /tmp/net.${dev}.has_ibft_config fi else echo $mac > /tmp/net.${dev}.has_ibft_config fi done ) >> /etc/cmdline.d/40-ibft.conf } parse_iscsi_root() { local v v=${1#iscsi:} # extract authentication info case "$v" in *@*:*:*:*:*) authinfo=${v%%@*} v=${v#*@} # allow empty authinfo to allow having an @ in iscsi_target_name like this: # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk if [ -n "$authinfo" ]; then OLDIFS="$IFS" IFS=: set $authinfo IFS="$OLDIFS" if [ $# -gt 4 ]; then warn "Wrong authentication info in iscsi: parameter!" return 1 fi iscsi_username=$1 iscsi_password=$2 if [ $# -gt 2 ]; then iscsi_in_username=$3 iscsi_in_password=$4 fi fi ;; esac # extract target ip case "$v" in [[]*[]]:*) iscsi_target_ip=${v#[[]} iscsi_target_ip=${iscsi_target_ip%%[]]*} v=${v#[[]$iscsi_target_ip[]]:} ;; *) iscsi_target_ip=${v%%[:]*} v=${v#$iscsi_target_ip:} ;; esac unset iscsi_target_name # extract target name case "$v" in *:iqn.*) iscsi_target_name=iqn.${v##*:iqn.} v=${v%:iqn.*}: ;; *:eui.*) iscsi_target_name=eui.${v##*:eui.} v=${v%:eui.*}: ;; *:naa.*) iscsi_target_name=naa.${v##*:naa.} v=${v%:naa.*}: ;; esac # parse the rest OLDIFS="$IFS" IFS=: set $v IFS="$OLDIFS" iscsi_protocol=$1; shift # ignored iscsi_target_port=$1; shift if [ -n "$iscsi_target_name" ]; then if [ $# -eq 3 ]; then iscsi_iface_name=$1; shift fi if [ $# -eq 2 ]; then iscsi_netdev_name=$1; shift fi iscsi_lun=$1; shift if [ $# -ne 0 ]; then warn "Invalid parameter in iscsi: parameter!" return 1 fi return 0 fi if [ $# -gt 3 ] && [ -n "$1$2" ]; then if [ -z "$3" ] || [ "$3" -ge 0 ] 2>/dev/null ; then iscsi_iface_name=$1; shift iscsi_netdev_name=$1; shift fi fi iscsi_lun=$1; shift iscsi_target_name=$(printf "%s:" "$@") iscsi_target_name=${iscsi_target_name%:} } ip_to_var() { local v=${1}: local i set -- while [ -n "$v" ]; do if [ "${v#\[*:*:*\]:}" != "$v" ]; then # handle IPv6 address i="${v%%\]:*}" i="${i##\[}" set -- "$@" "$i" v=${v#\[$i\]:} else set -- "$@" "${v%%:*}" v=${v#*:} fi done unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2 if [ $# -eq 0 ]; then autoconf="error" return 0 fi if [ $# -eq 1 ]; then # format: ip={dhcp|on|any|dhcp6|auto6|either6} # or # ip=<ipv4-address> means anaconda-style static config argument cluster autoconf="$1" if strglob "$autoconf" "*.*.*.*"; then # ip=<ipv4-address> means anaconda-style static config argument cluster: # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu> # ksdevice={link|bootif|ibft|<MAC>|<ifname>} ip="$autoconf" gw=$(getarg gateway=) mask=$(getarg netmask=) hostname=$(getarg hostname=) dev=$(getarg ksdevice=) autoconf="none" mtu=$(getarg mtu=) # handle special values for ksdevice case "$dev" in bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;; link) dev="" ;; # FIXME: do something useful with this ibft) dev="" ;; # ignore - ibft is handled elsewhere esac fi return 0 fi if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then # format: ip=<interface>:{dhcp|on|any|dhcp6|auto6}[:[<mtu>][:<macaddr>]] [ -n "$1" ] && dev="$1" [ -n "$2" ] && autoconf="$2" [ -n "$3" ] && mtu=$3 if [ -z "$5" ]; then macaddr="$4" else macaddr="${4}:${5}:${6}:${7}:${8}:${9}" fi return 0 fi # format: ip=<client-IP>:[<peer>]:<gateway-IP>:<netmask>:<client_hostname>:<interface>:{none|off|dhcp|on|any|dhcp6|auto6|ibft}:[:[<mtu>][:<macaddr>]] [ -n "$1" ] && ip=$1 [ -n "$2" ] && srv=$2 [ -n "$3" ] && gw=$3 [ -n "$4" ] && mask=$4 [ -n "$5" ] && hostname=$5 [ -n "$6" ] && dev=$6 [ -n "$7" ] && autoconf=$7 case "$8" in [0-9a-fA-F]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*) dns1="$8" [ -n "$9" ] && dns2="$9" ;; [0-9]*) mtu="$8" if [ -n "${9}" -a -z "${10}" ]; then macaddr="${9}" elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then macaddr="${9}:${10}:${11}:${12}:${13}:${14}" fi ;; *) if [ -n "${9}" -a -z "${10}" ]; then macaddr="${9}" elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then macaddr="${9}:${10}:${11}:${12}:${13}:${14}" fi ;; esac return 0 } route_to_var() { local v=${1}: local i set -- while [ -n "$v" ]; do if [ "${v#\[*:*:*\]:}" != "$v" ]; then # handle IPv6 address i="${v%%\]:*}" i="${i##\[}" set -- "$@" "$i" v=${v#\[$i\]:} else set -- "$@" "${v%%:*}" v=${v#*:} fi done unset route_mask route_gw route_dev case $# in 2) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2" return 0;; 3) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3" return 0;; *) return 1;; esac } parse_ifname_opts() { local IFS=: set $1 case $# in 7) ifname_if=$1 # udev requires MAC addresses to be lower case ifname_mac=$(echo $2:$3:$4:$5:$6:$7 | sed 'y/ABCDEF/abcdef/') ;; 21) ifname_if=$1 # udev requires MAC addresses to be lower case ifname_mac=$(echo $2:$3:$4:$5:$6:$7:$8:$9:${10}:${11}:${12}:${13}:${14}:${15}:${16}:${17}:${18}:${19}:${20}:${21} | sed 'y/ABCDEF/abcdef/') ;; *) die "Invalid arguments for ifname=" ;; esac case $ifname_if in eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]|eth[0-9][0-9][0-9][0-9]) warn "ifname=$ifname_if uses the kernel name space for interfaces" warn "This can fail for multiple network interfaces and is discouraged!" warn "Please use a custom name like \"netboot\" or \"bluesocket\"" warn "or use biosdevname and no ifname= at all." ;; esac } # some network driver need long time to initialize, wait before it's ready. wait_for_if_link() { local cnt=0 local li local timeout="$(getargs rd.net.timeout.iflink=)" timeout=${timeout:-60} timeout=$(($timeout*10)) while [ $cnt -lt $timeout ]; do li=$(ip -o link show dev $1 2>/dev/null) [ -n "$li" ] && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_if_up() { local cnt=0 local li local timeout="$(getargs rd.net.timeout.ifup=)" timeout=${timeout:-20} timeout=$(($timeout*10)) while [ $cnt -lt $timeout ]; do li=$(ip -o link show up dev $1) if [ -n "$li" ]; then case "$li" in *\<UP*) return 0;; *\<*,UP\>*) return 0;; *\<*,UP,*\>*) return 0;; esac fi if strstr "$li" "LOWER_UP" \ && strstr "$li" "state UNKNOWN" \ && ! strstr "$li" "DORMANT"; then return 0 fi sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_route_ok() { local cnt=0 local timeout="$(getargs rd.net.timeout.route=)" timeout=${timeout:-20} timeout=$(($timeout*10)) while [ $cnt -lt $timeout ]; do li=$(ip route show) [ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_ipv6_dad_link() { local cnt=0 local timeout="$(getargs rd.net.timeout.ipv6dad=)" timeout=${timeout:-50} timeout=$(($timeout*10)) while [ $cnt -lt $timeout ]; do [ -n "$(ip -6 addr show dev "$1" scope link)" ] \ && [ -z "$(ip -6 addr show dev "$1" scope link tentative)" ] \ && return 0 [ -n "$(ip -6 addr show dev "$1" scope link dadfailed)" ] \ && return 1 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_ipv6_dad() { local cnt=0 local timeout="$(getargs rd.net.timeout.ipv6dad=)" timeout=${timeout:-50} timeout=$(($timeout*10)) while [ $cnt -lt $timeout ]; do [ -n "$(ip -6 addr show dev "$1")" ] \ && [ -z "$(ip -6 addr show dev "$1" tentative)" ] \ && [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \ && return 0 [ -n "$(ip -6 addr show dev "$1" dadfailed)" ] \ && return 1 sleep 0.1 cnt=$(($cnt+1)) done return 1 } wait_for_ipv6_auto() { local cnt=0 local timeout="$(getargs rd.net.timeout.ipv6auto=)" timeout=${timeout:-40} timeout=$(($timeout*10)) while [ $cnt -lt $timeout ]; do [ -z "$(ip -6 addr show dev "$1" tentative)" ] \ && [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \ && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } linkup() { wait_for_if_link $1 2>/dev/null\ && ip link set $1 up 2>/dev/null\ && wait_for_if_up $1 2>/dev/null } type hostname >/dev/null 2>&1 || \ hostname() { cat /proc/sys/kernel/hostname } iface_has_carrier() { local cnt=0 local interface="$1" flags="" [ -n "$interface" ] || return 2 interface="/sys/class/net/$interface" [ -d "$interface" ] || return 2 local timeout="$(getargs rd.net.timeout.carrier=)" timeout=${timeout:-10} timeout=$(($timeout*10)) linkup "$1" li=$(ip -o link show up dev $1) strstr "$li" "NO-CARRIER" && _no_carrier_flag=1 while [ $cnt -lt $timeout ]; do if [ -n "$_no_carrier_flag" ]; then li=$(ip -o link show up dev $1) # NO-CARRIER flag was cleared strstr "$li" "NO-CARRIER" || return 0 elif ! [ -e "$interface/carrier" ]; then # sysfs not available and "NO-CARRIER" not displayed return 0 fi # double check the syscfs carrier flag [ -e "$interface/carrier" ] && [ "$(cat $interface/carrier)" = 1 ] && return 0 sleep 0.1 cnt=$(($cnt+1)) done return 1 } iface_has_link() { iface_has_carrier "$@" } iface_is_enslaved() { local _li _li=$(ip -o link show dev $1) strstr "$_li" " master " || return 1 return 0 } find_iface_with_link() { local iface_path="" iface="" for iface_path in /sys/class/net/*; do iface=${iface_path##*/} str_starts "$iface" "lo" && continue if iface_has_link $iface; then echo "$iface" return 0 fi done return 1 } is_persistent_ethernet_name() { local _netif="$1" local _name_assign_type="0" [ -f "/sys/class/net/$_netif/name_assign_type" ] \ && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type") # NET_NAME_ENUM 1 [ "$_name_assign_type" = "1" ] && return 1 # NET_NAME_PREDICTABLE 2 [ "$_name_assign_type" = "2" ] && return 0 case "$_netif" in # udev persistent interface names eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*) ;; ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*) ;; enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*) ;; enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*) ;; # biosdevname em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*) ;; p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*) ;; *) return 1 esac return 0 } is_kernel_ethernet_name() { local _netif="$1" local _name_assign_type="1" if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type") case "$_name_assign_type" in 2|3|4) # NET_NAME_PREDICTABLE 2 # NET_NAME_USER 3 # NET_NAME_RENAMED 4 return 1 ;; 1|*) # NET_NAME_ENUM 1 return 0 ;; esac fi # fallback to error prone manual name check case "$_netif" in eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*) return 0 ;; *) return 1 esac } iface_get_subchannels() { local _netif local _subchannels _netif="$1" _subchannels=$({ for i in /sys/class/net/$_netif/device/cdev[0-9]*; do [ -e $i ] || continue channel=$(readlink -f $i) printf -- "%s" "${channel##*/}," done }) [ -n "$_subchannels" ] || return 1 printf -- "%s" ${_subchannels%,} } modules.d/40network/module-setup.sh 0000755 00000001240 15053306611 0013252 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { echo -n "kernel-network-modules " if ! dracut_module_included "network-legacy" && [ -x "/usr/libexec/nm-initrd-generator" ] ; then echo "network-manager" else echo "network-legacy" fi return 0 } # called by dracut installkernel() { return 0 } # called by dracut install() { local _arch _i _dir inst_script "$moddir/netroot.sh" "/sbin/netroot" inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh" inst_hook pre-udev 50 "$moddir/ifname-genrules.sh" inst_hook cmdline 91 "$moddir/dhcp-root.sh" dracut_need_initqueue } modules.d/10i18n/console_init.sh 0000755 00000003114 15053306611 0012401 0 ustar 00 #!/bin/sh [ -n "$DRACUT_SYSTEMD" ] && exit 0 if [ -x $systemdutildir/systemd-vconsole-setup ]; then $systemdutildir/systemd-vconsole-setup "$@" fi [ -e /etc/vconsole.conf ] && . /etc/vconsole.conf DEFAULT_FONT=LatArCyrHeb-16 DEFAULT_KEYMAP=/etc/sysconfig/console/default.kmap set_keyboard() { local param [ "${UNICODE}" = 1 ] && param=-u || param=-a kbd_mode ${param} } set_terminal() { local dev=$1 if [ "${UNICODE}" = 1 ]; then printf '\033%%G' >&7 stty -F ${dev} iutf8 else printf '\033%%@' >&7 stty -F ${dev} -iutf8 fi } set_keymap() { local utf_switch if [ -z "${KEYMAP}" ]; then [ -f "${DEFAULT_KEYMAP}" ] && KEYMAP=${DEFAULT_KEYMAP} fi [ -n "${KEYMAP}" ] || return 1 [ "${UNICODE}" = 1 ] && utf_switch=-u loadkeys -q ${utf_switch} ${KEYMAP} ${EXT_KEYMAPS} } set_font() { local dev=$1; local trans=''; local uni='' [ -z "${FONT}" ] && FONT=${DEFAULT_FONT} [ -n "${FONT_MAP}" ] && trans="-m ${FONT_MAP}" [ -n "${FONT_UNIMAP}" ] && uni="-u ${FONT_UNIMAP}" setfont ${FONT} -C ${dev} ${trans} ${uni} } dev_close() { exec 6>&- exec 7>&- } dev_open() { local dev=$1 exec 6<${dev} && \ exec 7>>${dev} } dev=/dev/${1#/dev/} devname=${dev#/dev/} [ -c "${dev}" ] || { echo "Usage: $0 device" >&2 exit 1 } dev_open ${dev} for fd in 6 7; do if ! [ -t ${fd} ]; then echo "ERROR: File descriptor not opened: ${fd}" >&2 dev_close exit 1 fi done set_keyboard set_terminal ${dev} set_font ${dev} set_keymap dev_close modules.d/10i18n/10-console.rules 0000644 00000000250 15053306611 0012307 0 ustar 00 # Console initialization - keyboard, font, etc. KERNEL=="tty0", RUN+="/sbin/initqueue --onetime --unique --name console_init_$name /lib/udev/console_init $root/$name" modules.d/10i18n/parse-i18n.sh 0000755 00000002207 15053306611 0011605 0 ustar 00 #!/bin/sh inst_key_val() { local _value local _file local _default _file="$1"; shift _key="$1"; shift _default="$1"; shift _value="$(getarg $@)" [ -z "${_value}" ] && _value=$_default if [ -n "${_value}" ]; then printf '%s="%s"\n' ${_key} ${_value} >> $_file fi unset _file unset _value } inst_key_val /etc/vconsole.conf KEYMAP '' rd.vconsole.keymap KEYMAP -d KEYTABLE inst_key_val /etc/vconsole.conf FONT '' rd.vconsole.font FONT -d SYSFONT inst_key_val /etc/vconsole.conf FONT_MAP '' rd.vconsole.font.map FONT_MAP -d CONTRANS inst_key_val /etc/vconsole.conf FONT_UNIMAP '' rd.vconsole.font.unimap FONT_UNIMAP -d UNIMAP inst_key_val /etc/vconsole.conf UNICODE 1 rd.vconsole.font.unicode UNICODE vconsole.unicode inst_key_val /etc/vconsole.conf EXT_KEYMAP '' rd.vconsole.keymap.ext EXT_KEYMAP inst_key_val /etc/locale.conf LANG '' rd.locale.LANG LANG inst_key_val /etc/locale.conf LC_ALL '' rd.locale.LC_ALL LC_ALL if [ -f /etc/locale.conf ]; then . /etc/locale.conf export LANG export LC_ALL fi modules.d/10i18n/README 0000644 00000010504 15053306611 0010236 0 ustar 00 dracut i18n module ------------------ INDEX 0. Introduction 1. Hostonly vs Generic 2. Configuration 2.1. Variables 2.2. Setting up mappings 2.3. Additional settings 3. Kernel parameters ~ 0. Introduction i18n module provides internationalization for initramfs at runtime. It is intended to be generic across different GNU/Linux distributions. i18n and keyboard settings are stored in different files among distributions. To deal with it avoiding hardcoding those differences in the installation script we handle it by mappings between variables used by dracut and the ones in the system. Package maintainer is expected to create those for his/her distribution and it's appreciated to share it with us, so we can include it in source package. 1. Hostonly vs Generic If you invoke dracut with '-H' option, i18n module install script will gather variables values from your configuration files using mappings provided in "/etc/dracut.conf.d/<foo>.conf". Those variables will be put in "etc/vconsole.conf" and "etc/locale.conf" files inside initramfs image. Next it will install only declared font, keymaps and so. When building generic image (dracut without '-H' option), install script copies all content of directories: consolefonts, consoletrans, unimaps and keymaps to image. Take into account that's about 4 MiB. 2. Configuration 2.1. Variables The following variables are used by i18n install script and at initramfs runtime: KEYMAP - keyboard translation table loaded by loadkeys KEYTABLE - base name for keyboard translation table; if UNICODE is true, Unicode version will be loaded. Overrides KEYMAP. EXT_KEYMAPS - list of extra keymaps to bo loaded (sep. by space) UNICODE - boolean, indicating UTF-8 mode FONT - console font FONT_MAP - see description of '-m' parameter in setfont manual FONT_UNIMAP - see description of '-u' parameter in setfont manual The following are appended to EXT_KEYMAPS only during build time: UNIKEYMAP GRP_TOGGLE They were used in 10redhat-i18n module, but not sure of its purpose. I'm leaving it in case... The following are taken from the environment: LANG LC_ALL If UNICODE variable is not provided, script indicates if UTF-8 should be used on the basis of LANG value (if it ends with ".utf8" or similar). 2.2. Setting up mappings Mappings between variables listed in 2.1. and the ones spread around your system are set up in /etc/dracut.conf.d/<foo>.conf. You need to assign mappings to i18n_vars. Here's an example: i18n_vars="/etc/conf.d/keymaps:KEYMAP,EXTENDED_KEYMAPS-EXT_KEYMAPS /etc/conf.d/consolefont:CONSOLEFONT-FONT,CONSOLETRANSLATION-FONT_MAP /etc/rc.conf:UNICODE" First we've got name of file in host file system tree. After colon there's mapping: <from>-<to>. If both variables have the same name you can enter just a single, but it's important to specify it! The module will source only variables you've listed. Below there's detailed description in BNF: <list> ::= <element> | <element> " " <list> <element> ::= <conf-file-name> ":" <map-list> <map-list> ::= <mapping> | <mapping> "," <map-list> <mapping> ::= <src-var> "-" <dst-var> | <src-var> We assume no whitespace are allowed between symbols. <conf-file-name> is a file holding <src-var> in your system. <src-var> is a variable holding value of meaning the same as <dst-var>. <dst-var> is a variable which will be set up inside initramfs. If <dst-var> has the same name as <src-var> we can omit <dst-var>. Example: /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS <list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS <element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS <conf-file-name> = /etc/conf.d/keymaps <map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS <mapping> = KEYMAP <src-var> = KEYMAP <mapping> = extended_keymaps-EXT_KEYMAPS <src-var> = extended_keymaps <dst-var> = EXT_KEYMAPS 2.3. Additional settings If you encounter following error message: "Directories consolefonts, consoletrans, keymaps, unimaps not found.", you can provide path where those directories lie in your system by setting kbddir in configuration file (the same where you put mappings). 3. Kernel parameters If you create generic initramfs you can set up i18n by kernel parameters using variables listed in 2.1. (except of UNIKEYMAP and GRP_TOGGLE) The recommended minimum is: FONT and KEYMAP. modules.d/10i18n/module-setup.sh 0000755 00000020164 15053306611 0012343 0 ustar 00 #!/bin/bash # called by dracut check() { [[ "$mount_needs" ]] && return 1 require_binaries setfont loadkeys kbd_mode || return 1 return 0 } # called by dracut depends() { return 0 } # called by dracut install() { if dracut_module_included "systemd"; then unset FONT unset KEYMAP [[ -f /etc/vconsole.conf ]] && . /etc/vconsole.conf fi KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}" I18N_CONF="/etc/locale.conf" VCONFIG_CONF="/etc/vconsole.conf" # This is from 10redhat-i18n. findkeymap () { local MAPS=$1 local MAPNAME=${1%.map*} local map [[ ! -f $MAPS ]] && \ MAPS=$(find ${kbddir}/keymaps -type f -name ${MAPNAME} -o -name ${MAPNAME}.map -o -name ${MAPNAME}.map.\*) for map in $MAPS; do KEYMAPS="$KEYMAPS $map" case $map in *.gz) cmd=zgrep;; *.bz2) cmd=bzgrep;; *) cmd=grep ;; esac for INCL in $($cmd "^include " $map | while read a a b || [ -n "$a" ]; do echo ${a//\"/}; done); do for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do strstr "$KEYMAPS" "$FN" || findkeymap $FN done done done } # Function gathers variables from distributed files among the tree, maps to # specified names and prints the result in format "new-name=value". # # $@ = list in format specified below (BNF notation) # # <list> ::= <element> | <element> " " <list> # <element> ::= <conf-file-name> ":" <map-list> # <map-list> ::= <mapping> | <mapping> "," <map-list> # <mapping> ::= <src-var> "-" <dst-var> | <src-var> # # We assume no whitespace are allowed between symbols. # <conf-file-name> is a file holding <src-var> in your system. # <src-var> is a variable holding value of meaning the same as <dst-var>. # <dst-var> is a variable which will be set up inside initramfs. # If <dst-var> has the same name as <src-var> we can omit <dst-var>. # # Example: # /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS # <list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS # <element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS # <conf-file-name> = /etc/conf.d/keymaps # <map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS # <mapping> = KEYMAP # <src-var> = KEYMAP # <mapping> = extended_keymaps-EXT_KEYMAPS # <src-var> = extended_keymaps # <dst-var> = EXT_KEYMAPS gather_vars() { local item map value for item in $@ do item=(${item/:/ }) for map in ${item[1]//,/ } do map=(${map//-/ }) if [[ -f "${item[0]}" ]]; then value=$(grep "^${map[0]}=" "${item[0]}") value=${value#*=} echo "${map[1]:-${map[0]}}=${value}" fi done done } install_base() { inst_multiple setfont loadkeys kbd_mode stty if ! dracut_module_included "systemd"; then inst ${moddir}/console_init.sh /lib/udev/console_init inst_rules ${moddir}/10-console.rules inst_hook cmdline 20 "${moddir}/parse-i18n.sh" fi if [[ ${kbddir} != "/usr/share" ]]; then inst_dir /usr/share for _src in $(eval echo {${KBDSUBDIRS}}); do [ ! -e "${initdir}/usr/share/${_src}" ] && ln -s "${kbddir}/${_src}" "${initdir}/usr/share/${_src}" done fi } install_all_kbd() { local rel f for _src in $(eval echo ${kbddir}/{${KBDSUBDIRS}}); do inst_dir "$_src" $DRACUT_CP -L -t "${initdir}/${_src}" "$_src"/* done # remove unnecessary files rm -f -- "${initdir}${kbddir}/consoletrans/utflist" find "${initdir}${kbddir}/" -name README\* -delete find "${initdir}${kbddir}/" -name '*.gz' -print -quit \ | while read line || [ -n "$line" ]; do inst_multiple gzip done find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \ | while read line || [ -n "$line" ]; do inst_multiple bzip2 done } install_local_i18n() { local map eval $(gather_vars ${i18n_vars}) [ -f $I18N_CONF ] && . $I18N_CONF [ -f $VCONFIG_CONF ] && . $VCONFIG_CONF shopt -q -s nocasematch if [[ ${UNICODE} ]] then if [[ ${UNICODE} = YES || ${UNICODE} = 1 ]] then UNICODE=1 elif [[ ${UNICODE} = NO || ${UNICODE} = 0 ]] then UNICODE=0 else UNICODE='' fi fi if [[ ! ${UNICODE} && ${LANG} =~ .*\.UTF-?8 ]] then UNICODE=1 fi shopt -q -u nocasematch # Gentoo user may have KEYMAP set to something like "-u pl2", KEYMAP=${KEYMAP#-* } # openSUSE user may have KEYMAP set to something like ".gz" KEYMAP=${KEYMAP/.gz/} # KEYTABLE is a bit special - it defines base keymap name and UNICODE # determines whether non-UNICODE or UNICODE version is used if [[ ${KEYTABLE} ]]; then if [[ ${UNICODE} == 1 ]]; then [[ ${KEYTABLE} =~ .*\.uni.* ]] || KEYTABLE=${KEYTABLE%.map*}.uni fi KEYMAP=${KEYTABLE} fi # I'm not sure of the purpose of UNIKEYMAP and GRP_TOGGLE. They were in # original redhat-i18n module. Anyway it won't hurt. EXT_KEYMAPS+=\ ${UNIKEYMAP}\ ${GRP_TOGGLE} [[ ${KEYMAP} ]] || { dinfo 'No KEYMAP configured.' return 1 } findkeymap ${KEYMAP} for map in ${EXT_KEYMAPS} do ddebug "Adding extra map: ${map}" findkeymap ${map} done for keymap in ${KEYMAPS}; do inst_opt_decompress ${keymap} done inst_opt_decompress ${kbddir}/consolefonts/${DEFAULT_FONT}.* if [[ ${FONT} ]] && [[ ${FONT} != ${DEFAULT_FONT} ]] then FONT=${FONT%.psf*} inst_opt_decompress ${kbddir}/consolefonts/${FONT}.* fi if [[ ${FONT_MAP} ]] then FONT_MAP=${FONT_MAP%.trans} # There are three different formats that setfont supports inst_simple ${kbddir}/consoletrans/${FONT_MAP} \ || inst_simple ${kbddir}/consoletrans/${FONT_MAP}.trans \ || inst_simple ${kbddir}/consoletrans/${FONT_MAP}_to_uni.trans \ || dwarn "Could not find FONT_MAP ${FONT_MAP}!" fi if [[ ${FONT_UNIMAP} ]] then FONT_UNIMAP=${FONT_UNIMAP%.uni} inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni fi if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then inst_simple ${I18N_CONF} else mksubdirs ${initdir}${I18N_CONF} print_vars LC_ALL LANG >> ${initdir}${I18N_CONF} fi if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then inst_simple ${VCONFIG_CONF} else mksubdirs ${initdir}${VCONFIG_CONF} print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF} fi return 0 } checks() { for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share /usr/share/kbd do [[ -d "${kbddir}" ]] && \ for dir in ${KBDSUBDIRS//,/ } do [[ -d "${kbddir}/${dir}" ]] && continue false done && break kbddir='' done [[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \ [[ ! ${hostonly} || ${i18n_vars} ]] || { derror 'i18n_vars not set! Please set up i18n_vars in ' \ 'configuration file.' } return 0 } if checks; then install_base if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} == "yes" ]]; then install_local_i18n || install_all_kbd else install_all_kbd fi fi } modules.d/90dm/11-dm.rules 0000644 00000000216 15053306611 0011101 0 ustar 00 SUBSYSTEM!="block", GOTO="dm_end" KERNEL!="dm-[0-9]*", GOTO="dm_end" ACTION!="add|change", GOTO="dm_end" OPTIONS+="db_persist" LABEL="dm_end" modules.d/90dm/dm-shutdown.sh 0000755 00000002325 15053306611 0012021 0 ustar 00 #!/bin/sh _remove_dm() { local dev=$1 local s local devname for s in /sys/block/${dev}/holders/dm-* ; do [ -e ${s} ] || continue _remove_dm ${s##*/} done # multipath devices might have MD devices on top, # which are removed after this script. So do not # remove those to avoid spurious errors case $(cat /sys/block/${dev}/dm/uuid) in mpath-*) return 0 ;; *) devname=$(cat /sys/block/${dev}/dm/name) dmsetup -v --noudevsync remove "$devname" || return $? ;; esac return 0 } _do_dm_shutdown() { local ret=0 local final=$1 local dev info "Disassembling device-mapper devices" for dev in /sys/block/dm-* ; do [ -e ${dev} ] || continue if [ "x$final" != "x" ]; then _remove_dm ${dev##*/} || ret=$? else _remove_dm ${dev##*/} >/dev/null 2>&1 || ret=$? fi done if [ "x$final" != "x" ]; then info "dmsetup ls --tree" dmsetup ls --tree 2>&1 | vinfo fi return $ret } if command -v dmsetup >/dev/null && [ "x$(dmsetup status)" != "xNo devices found" ]; then _do_dm_shutdown $1 else : fi modules.d/90dm/59-persistent-storage-dm.rules 0000644 00000001235 15053306611 0014757 0 ustar 00 SUBSYSTEM!="block", GOTO="dm_end" ACTION!="add|change", GOTO="dm_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="dm_end" KERNEL!="dm-[0-9]*", GOTO="dm_end" ACTION=="add", GOTO="dm_end" IMPORT{program}="/sbin/dmsetup info -c --nameprefixes --unquoted --rows --noheadings -o name,uuid,suspended,readonly,major,minor,open,tables_loaded,names_using_dev -j%M -m%m" ENV{DM_NAME}!="?*", GOTO="dm_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end" ENV{DM_UUID}=="CRYPT-TEMP-?*", GOTO="dm_end" ENV{DM_UUID}!="?*", ENV{DM_NAME}=="temporary-cryptsetup-?*", GOTO="dm_end" IMPORT BLKID LABEL="dm_end" modules.d/90dm/dm-pre-udev.sh 0000755 00000000146 15053306611 0011674 0 ustar 00 #!/bin/sh strstr "$(cat /proc/misc)" device-mapper || modprobe dm_mod modprobe dm_mirror 2>/dev/null modules.d/90dm/module-setup.sh 0000755 00000001755 15053306611 0012201 0 ustar 00 #!/bin/bash # called by dracut check() { require_binaries dmsetup || return 1 return 255 } # called by dracut depends() { return 0 } # called by dracut installkernel() { instmods =drivers/md dm_mod dm-cache dm-cache-mq dm-cache-cleaner } # called by dracut install() { modinfo -k $kernel dm_mod >/dev/null 2>&1 && \ inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh" inst_multiple dmsetup inst_multiple -o dmeventd inst_libdir_file "libdevmapper-event.so*" inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules # Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules # files, but provides the one below: inst_rules 64-device-mapper.rules # debian udev rules inst_rules 60-persistent-storage-dm.rules 55-dm.rules inst_rules "$moddir/11-dm.rules" inst_rules "$moddir/59-persistent-storage-dm.rules" prepare_udev_rules 59-persistent-storage-dm.rules inst_hook shutdown 25 "$moddir/dm-shutdown.sh" } modules.d/95lunmask/sas_transport_scan_lun.sh 0000755 00000001070 15053306611 0015407 0 ustar 00 #!/bin/bash # # sas_transport_lun_scan # # Selectively enable individual LUNs behind a SAS end device # # ACTION=="add", SUBSYSTEM=="sas_transport", ATTR{sas_address}=="sas_addr", \ # PROGRAM="sas_transport_lun_scan lun" # [ -z $DEVPATH ] && exit 1 if [ -n "$1" ] ; then LUN=$1 else LUN=- fi ID=${DEVPATH##*/end_device-} HOST=${ID%%:*} CHANNEL=${ID%%-*} CHANNEL=${CHANNEL#*:} if [ -f /sys$DEVPATH/scsi_target_id ] ; then TARGET=$(cat /sys$DEVPATH/scsi_target_id) fi [ -z "$TARGET" ] && exit 1 echo 0 $TARGET $LUN > /sys/class/scsi_host/host$HOST/scan modules.d/95lunmask/parse-lunmask.sh 0000755 00000002313 15053306611 0013406 0 ustar 00 #!/bin/sh # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- # ex: ts=8 sw=4 sts=4 et filetype=sh create_udev_rule() { local transport=$1 local tgtid=$2 local lun=$3 local _rule=/etc/udev/rules.d/51-${transport}-lunmask-${tgtid}.rules local _cu_type _dev_type [ -e ${_rule} ] && return 0 if [ ! -f "$_rule" ] ; then if [ "$transport" = "fc" ] ; then cat > $_rule <<EOF ACTION=="add", SUBSYSTEM=="fc_remote_ports", ATTR{port_name}=="$tgtid", PROGRAM="fc_transport_scan_lun.sh $lun" EOF elif [ "$transport" = "sas" ] ; then cat > $_rule <<EOF ACTION=="add", SUBSYSTEM=="sas_device", ATTR{sas_address}=="$tgtid", PROGRAM="sas_transport_scan_lun.sh $lun" EOF fi fi } for lunmask_arg in $(getargs rd.lunmask); do ( local OLDIFS="$IFS" local IFS="," set $lunmask_arg IFS="$OLDIFS" if [ -d /sys/module/scsi_mod ] ; then printf "manual" > /sys/module/scsi_mod/parameters/scan elif [ ! -f /etc/modprobe.d/95lunmask.conf ] ; then echo "options scsi_mod scan=manual" > /etc/modprobe.d/95lunmask.conf fi create_udev_rule $1 $2 $3 ) done modules.d/95lunmask/fc_transport_scan_lun.sh 0000755 00000001062 15053306611 0015212 0 ustar 00 #!/bin/bash # # fc_transport_lun_scan # # Selectively enable individual LUNs behind an FC remote port # # ACTION=="add", SUBSYSTEM=="fc_transport", ATTR{port_name}=="wwpn", \ # PROGRAM="fc_transport_lun_scan lun" # [ -z $DEVPATH ] && exit 1 if [ -n "$1" ] ; then LUN=$1 else LUN=- fi ID=${DEVPATH##*/rport-} HOST=${ID%%:*} CHANNEL=${ID%%-*} CHANNEL=${CHANNEL#*:} if [ -f /sys$DEVPATH/scsi_target_id ] ; then TARGET=$(cat /sys$DEVPATH/scsi_target_id) fi [ -z "$TARGET" ] && exit 1 echo $CHANNEL $TARGET $LUN > /sys/class/scsi_host/host$HOST/scan modules.d/95lunmask/module-setup.sh 0000755 00000004316 15053306611 0013254 0 ustar 00 #!/bin/bash # -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*- # ex: ts=8 sw=4 sts=4 et filetype=sh # called by dracut cmdline() { get_lunmask() { local _dev=$1 local _devpath=$(cd -P /sys/dev/block/$_dev ; echo $PWD) local _sdev _lun _rport _end_device _classdev _wwpn _sas_address [ "${_devpath#*/sd}" == "$_devpath" ] && return 1 _sdev="${_devpath%%/block/*}" _lun="${_sdev##*:}" # Check for FibreChannel _rport="${_devpath##*/rport-}" if [ "$_rport" != "$_devpath" ] ; then _rport="${_rport%%/*}" _classdev="/sys/class/fc_remote_ports/rport-${_rport}" [ -d "$_classdev" ] || return 1 _wwpn=$(cat ${_classdev}/port_name) echo "rd.lunmask=fc,${_wwpn},${_lun}" return 0 fi # Check for SAS _end_device="${_devpath##*/end_device-}" if [ "$_end_device" != "$_devpath" ] ; then _end_device="${_end_device%%/*}" _classdev="/sys/class/sas_device/end_device-${_end_device}" [ -e "$_classdev" ] || return 1 _sas_address=$(cat ${_classdev}/sas_address) echo "rd.lunmask=sas,${_sas_address},${_lun}" return 0 fi return 1 } [[ $hostonly ]] || [[ $mount_needs ]] && { for_each_host_dev_and_slaves_all get_lunmask } | sort | uniq } # called by dracut check() { [[ $hostonly ]] || [[ $mount_needs ]] && { [ -w /sys/module/scsi_mod/parameters/scan ] || return 255 scan_type=$(cat /sys/module/scsi_mod/parameters/scan) [ "$scan_type" = "manual" ] && return 0 return 255 } return 0 } # called by dracut depends() { return 0 } # called by dracut install() { inst_script "$moddir/fc_transport_scan_lun.sh" /usr/lib/udev/fc_transport_scan_lun.sh inst_script "$moddir/sas_transport_scan_lun.sh" /usr/lib/udev/sas_transport_scan_lun.sh inst_hook cmdline 30 "$moddir/parse-lunmask.sh" if [[ $hostonly_cmdline == "yes" ]] ; then local _lunmask for _lunmask in $(cmdline) ; do printf "%s\n" "$_lunmask" >> "${initdir}/etc/cmdline.d/95lunmask.conf" done fi } modules.d/95fcoe-uefi/parse-uefifcoe.sh 0000755 00000001630 15053306611 0013712 0 ustar 00 #!/bin/bash command -v getarg >/dev/null || . /lib/dracut-lib.sh command -v get_fcoe_boot_mac >/dev/null || . /lib/uefi-lib.sh command -v set_ifname >/dev/null || . /lib/net-lib.sh print_fcoe_uefi_conf() { local mac dev vlan mac=$(get_fcoe_boot_mac "$1") [ -z "$mac" ] && return 1 dev=$(set_ifname fcoe "$mac") vlan=$(get_fcoe_boot_vlan "$1") || return 1 case "$vlan" in "0") ;; '') return 1 ;; [0-9]*) printf "%s\n" "vlan=$dev.$vlan:$dev" dev="$dev.$vlan" ;; *) printf "%s\n" "vlan=$vlan:$dev" dev="$vlan" ;; esac # fcoe=eth0:nodcb printf "fcoe=%s\n" "$dev:nodcb" return 0 } for i in /sys/firmware/efi/vars/FcoeBootDevice-*/data; do [ -e "$i" ] || continue print_fcoe_uefi_conf $i > /etc/cmdline.d/40-fcoe-uefi.conf && break done modules.d/95fcoe-uefi/module-setup.sh 0000755 00000000766 15053306611 0013451 0 ustar 00 #!/bin/bash # called by dracut check() { is_fcoe() { block_is_fcoe $1 || return 1 } [[ $hostonly ]] || [[ $mount_needs ]] && { for_each_host_dev_and_slaves is_fcoe || return 255 [ -d /sys/firmware/efi ] || return 255 } require_binaries dcbtool fipvlan lldpad ip readlink || return 1 return 0 } # called by dracut depends() { echo fcoe uefi-lib return 0 } # called by dracut install() { inst_hook cmdline 20 "$moddir/parse-uefifcoe.sh" } modules.d/04watchdog-modules/module-setup.sh 0000755 00000003623 15053306611 0015036 0 ustar 00 #!/bin/bash # called by dracut check() { return 255 } # called by dracut depends() { return 0 } # called by dracut install() { return 0 } installkernel() { local -A _drivers local _alldrivers _wdtdrv _wdtppath _dir [[ -d /sys/class/watchdog/ ]] || return for _dir in /sys/class/watchdog/*; do [[ -d "$_dir" ]] || continue [[ -f "$_dir/state" ]] || continue # device/modalias will return driver of this device _wdtdrv=$(< "$_dir/device/modalias") # There can be more than one module represented by same # modalias. Currently load all of them. # TODO: Need to find a way to avoid any unwanted module # represented by modalias _wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null) if [[ $_wdtdrv ]]; then instmods $_wdtdrv for i in $_wdtdrv; do _drivers[$i]=1 done fi # however in some cases, we also need to check that if there is # a specific driver for the parent bus/device. In such cases # we also need to enable driver for parent bus/device. _wdtppath=$(readlink -f "$_dir/device") while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do _wdtppath=$(readlink -f "$_wdtppath/..") [[ -f "$_wdtppath/modalias" ]] || continue _wdtdrv=$(< "$_wdtppath/modalias") _wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null) if [[ $_wdtdrv ]]; then instmods $_wdtdrv for i in $_wdtdrv; do _drivers[$i]=1 done fi done done # ensure that watchdog module is loaded as early as possible _alldrivers="${!_drivers[*]}" [[ $_alldrivers ]] && echo "rd.driver.pre=${_alldrivers// /,}" > ${initdir}/etc/cmdline.d/00-watchdog.conf return 0 } modules.d/03modsign/load-modsign-keys.sh 0000755 00000000352 15053306611 0014126 0 ustar 00 #!/bin/sh # # Licensed under the GPLv2 # # Copyright 2013 Red Hat, Inc. # Peter Jones <pjones@redhat.com> for x in /lib/modules/keys/* ; do [ "${x}" = "/lib/modules/keys/*" ] && break keyctl padd asymmetric "" @s < ${x} done modules.d/03modsign/module-setup.sh 0000755 00000001330 15053306611 0013220 0 ustar 00 #!/bin/bash # # Licensed under the GPLv2 # # Copyright 2013 Red Hat, Inc. # Peter Jones <pjones@redhat.com> # called by dracut check() { require_binaries keyctl || return 1 # do not include module in hostonly mode, # if no keys are present if [[ $hostonly ]]; then x=$(echo /lib/modules/keys/*) [[ "${x}" = "/lib/modules/keys/*" ]] && return 255 fi return 0 } # called by dracut depends() { return 0 } # called by dracut install() { inst_dir /lib/modules/keys inst_binary keyctl inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh" for x in /lib/modules/keys/* ; do [[ "${x}" = "/lib/modules/keys/*" ]] && break inst_simple "${x}" done } modules.d/99fs-lib/fs-lib.sh 0000755 00000014355 15053306611 0011517 0 ustar 00 #!/bin/sh type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh fsck_ask_reboot() { info "note - fsck suggests reboot, if you" info "leave shell, booting will continue normally" emergency_shell -n "(reboot ?)" } fsck_ask_err() { warn "*** An error occurred during the file system check." warn "*** Dropping you to a shell; the system will try" warn "*** to mount the filesystem(s), when you leave the shell." emergency_shell -n "(Repair filesystem)" } # inherits: _ret _drv _out fsck_tail() { [ $_ret -gt 0 ] && warn "$_drv returned with $_ret" if [ $_ret -ge 4 ]; then [ -n "$_out" ] && echo "$_out"|vwarn fsck_ask_err else [ -n "$_out" ] && echo "$_out"|vinfo [ $_ret -ge 2 ] && fsck_ask_reboot fi } # note: this function sets _drv of the caller fsck_able() { case "$1" in xfs) # { # type xfs_db && # type xfs_repair && # type xfs_check && # type mount && # type umount # } >/dev/null 2>&1 && # _drv="_drv=none fsck_drv_xfs" && # return 0 return 1 ;; ext?) type e2fsck >/dev/null 2>&1 && _drv="fsck_drv_com e2fsck" && return 0 ;; f2fs) type fsck.f2fs >/dev/null 2>&1 && _drv="fsck_drv_com fsck.f2fs" && return 0 ;; jfs) type jfs_fsck >/dev/null 2>&1 && _drv="fsck_drv_com jfs_fsck" && return 0 ;; reiserfs) type reiserfsck >/dev/null 2>&1 && _drv="fsck_drv_com reiserfsck" && return 0 ;; btrfs) # type btrfsck >/dev/null 2>&1 && # _drv="_drv=none fsck_drv_btrfs" && # return 0 return 1 ;; nfs*) # nfs can be a nop, returning success _drv=":" && return 0 ;; *) type fsck >/dev/null 2>&1 && _drv="fsck_drv_std fsck" && return 0 ;; esac return 1 } # note: all drivers inherit: _drv _fop _dev fsck_drv_xfs() { # xfs fsck is not necessary... Either it mounts or not return 0 } fsck_drv_btrfs() { # btrfs fsck is not necessary... Either it mounts or not return 0 } # common code for checkers that follow usual subset of options and return codes fsck_drv_com() { local _drv="$1" local _ret local _out if ! strglobin "$_fop" "-[ynap]"; then _fop="-a ${_fop}" fi info "issuing $_drv $_fop $_dev" # we enforce non-interactive run, so $() is fine _out=$($_drv $_fop "$_dev") _ret=$? fsck_tail return $_ret } # code for generic fsck, if the filesystem checked is "unknown" to us fsck_drv_std() { local _ret local _out unset _out info "issuing fsck $_fop $_dev" # note, we don't enforce -a here, thus fsck is being run (in theory) # interactively; otherwise some tool might complain about lack of terminal # (and using -a might not be safe) fsck $_fop "$_dev" >/dev/console 2>&1 _ret=$? fsck_tail return $_ret } # checks single filesystem, relying on specific "driver"; we don't rely on # automatic checking based on fstab, so empty one is passed; # takes 4 arguments - device, filesystem, filesystem options, additional fsck options; # first 2 arguments are mandatory (fs may be auto or "") # returns 255 if filesystem wasn't checked at all (e.g. due to lack of # necessary tools or insufficient options) fsck_single() { local FSTAB_FILE=/etc/fstab.empty local _dev="$1" local _fs="${2:-auto}" local _fsopts="$3" local _fop="$4" local _drv [ $# -lt 2 ] && return 255 # if UUID= marks more than one device, take only the first one [ -e "$_dev" ] || _dev=$(devnames "$_dev"| while read line || [ -n "$line" ]; do if [ -n "$line" ]; then echo $line; break;fi;done) [ -e "$_dev" ] || return 255 _fs=$(det_fs "$_dev" "$_fs") fsck_able "$_fs" || return 255 info "Checking $_fs: $_dev" export FSTAB_FILE eval "$_drv" return $? } # takes list of filesystems to check in parallel; we don't rely on automatic # checking based on fstab, so empty one is passed fsck_batch() { local FSTAB_FILE=/etc/fstab.empty local _drv=fsck local _dev local _ret local _out [ $# -eq 0 ] || ! type fsck >/dev/null 2>&1 && return 255 info "Checking filesystems (fsck -M -T -a):" for _dev in "$@"; do info " $_dev" done export FSTAB_FILE _out="$(fsck -M -T "$@" -- -a)" _ret=$? fsck_tail return $_ret } # verify supplied filesystem type: # if user provided the fs and we couldn't find it, assume user is right # if we found the fs, assume we're right det_fs() { local _dev="$1" local _orig="${2:-auto}" local _fs _fs=$(udevadm info --query=env --name="$_dev" | \ while read line || [ -n "$line" ]; do if str_starts $line "ID_FS_TYPE="; then echo ${line#ID_FS_TYPE=} break fi done) _fs=${_fs:-auto} if [ "$_fs" = "auto" ]; then _fs="$_orig" fi echo "$_fs" } write_fs_tab() { local _o local _rw local _root local _rootfstype local _rootflags local _fspassno _fspassno="0" _root="$1" _rootfstype="$2" _rootflags="$3" [ -z "$_rootfstype" ] && _rootfstype=$(getarg rootfstype=) [ -z "$_rootflags" ] && _rootflags=$(getarg rootflags=) [ -z "$_rootfstype" ] && _rootfstype="auto" if [ -z "$_rootflags" ]; then _rootflags="ro,x-initrd.mount" else _rootflags="ro,$_rootflags,x-initrd.mount" fi _rw=0 CMDLINE=$(getcmdline) for _o in $CMDLINE; do case $_o in rw) _rw=1;; ro) _rw=0;; esac done if [ "$_rw" = "1" ]; then _rootflags="$_rootflags,rw" if ! getargbool 0 rd.skipfsck; then _fspassno="1" fi fi echo "$_root /sysroot $_rootfstype $_rootflags $_fspassno 0" >> /etc/fstab if type systemctl >/dev/null 2>/dev/null; then systemctl daemon-reload systemctl --no-block start initrd-root-fs.target fi } modules.d/99fs-lib/module-setup.sh 0000755 00000003272 15053306611 0012762 0 ustar 00 #!/bin/bash # called by dracut check() { return 0 } # called by dracut depends() { return 0 } echo_fs_helper() { local dev=$1 fs=$2 case "$fs" in xfs) echo -n " xfs_db xfs_repair xfs_check xfs_metadump " ;; ext?) echo -n " e2fsck " ;; jfs) echo -n " jfs_fsck " ;; reiserfs) echo -n " reiserfsck " ;; btrfs) echo -n " btrfsck " ;; esac echo -n " fsck.$fs " return 0 } include_fs_helper_modules() { local dev=$1 fs=$2 case "$fs" in xfs|btrfs|ext4) instmods crc32c ;; f2fs) instmods crc32 ;; esac } # called by dracut installkernel() { # xfs/btrfs/ext4 need crc32c, f2fs needs crc32 if [[ $hostonly ]]; then for_each_host_dev_fs include_fs_helper_modules : else instmods crc32c crc32 fi } # called by dracut install() { local _helpers inst "$moddir/fs-lib.sh" "/lib/fs-lib.sh" > ${initdir}/etc/fstab.empty [[ "$nofscks" = "yes" ]] && return if [[ "$fscks" = "${fscks#*[^ ]*}" ]]; then _helpers="\ umount mount /sbin/fsck* xfs_db xfs_check xfs_repair xfs_metadump e2fsck jfs_fsck reiserfsck btrfsck " if [[ $hostonly ]]; then _helpers="umount mount " _helpers+=$(for_each_host_dev_fs echo_fs_helper) fi else _helpers="$fscks" fi if [[ "$_helpers" == *e2fsck* ]] && [ -e /etc/e2fsck.conf ]; then inst_simple /etc/e2fsck.conf fi inst_multiple -o $_helpers fsck } dracut.conf.d/01-microcode.conf 0000644 00000000026 15053306611 0012223 0 ustar 00 early_microcode="yes" dracut.conf.d/50-nss-softokn.conf 0000644 00000000101 15053306611 0012541 0 ustar 00 # turn on nss-softokn module add_dracutmodules+=" nss-softokn " dracut.conf.d/02-rescue.conf 0000644 00000000032 15053306611 0011543 0 ustar 00 dracut_rescue_image="yes" dracut.conf.d/01-dist.conf 0000644 00000001030 15053306611 0011216 0 ustar 00 # dracut config file customized for RedHat/Fedora. # i18n i18n_vars="/etc/sysconfig/keyboard:KEYTABLE-KEYMAP /etc/sysconfig/i18n:SYSFONT-FONT,FONTACM-FONT_MAP,FONT_UNIMAP" i18n_default_font="eurlatgr" i18n_install_all="yes" stdloglvl=3 sysloglvl=5 install_optional_items+=" vi /etc/virc ps grep cat rm " prefix="/" systemdutildir=/usr/lib/systemd systemdsystemunitdir=/usr/lib/systemd/system systemdsystemconfdir=/etc/systemd/system udevdir=/usr/lib/udev hostonly="yes" hostonly_cmdline="no" early_microcode="yes" reproducible="yes" dracut.conf.d/99-microcode-override.conf 0000644 00000000425 15053306611 0014064 0 ustar 00 ## Uncomment the following line in order to disable ## microcode_ctl module that is used for $fw_dir variable overriding. ## ## Please refer to /usr/share/doc/microcode_ctl/README.caveats ## for additional information. ## #omit_dracutmodules+=' microcode_ctl-fw_dir_override ' dracut-initramfs-restore 0000755 00000003422 15053306611 0011430 0 ustar 00 #!/bin/bash set -e # do some sanity checks first [ -e /run/initramfs/bin/sh ] && exit 0 [ -e /run/initramfs/.need_shutdown ] || exit 0 # SIGTERM signal is received upon forced shutdown: ignore the signal # We want to remain alive to be able to trap unpacking errors to avoid # switching root to an incompletely unpacked initramfs trap 'echo "Received SIGTERM signal, ignoring!" >&2' TERM KERNEL_VERSION="$(uname -r)" [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut SKIP="$dracutbasedir/skipcpio" [[ -x $SKIP ]] || SKIP=cat [[ -f /etc/machine-id ]] && read MACHINE_ID < /etc/machine-id mount -o ro /boot &>/dev/null || true if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd" fi [[ -f $IMG ]] || IMG="/boot/initramfs-${KERNEL_VERSION}.img" cd /run/initramfs [ -f .need_shutdown -a -f "$IMG" ] || exit 1 if $SKIP "$IMG" | zcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then rm -f -- .need_shutdown elif $SKIP "$IMG" | xzcat | cpio -id --no-absolute-filenames --quiet >/dev/null; then rm -f -- .need_shutdown elif $SKIP "$IMG" | lz4 -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then rm -f -- .need_shutdown elif $SKIP "$IMG" | zstd -d -c | cpio -id --no-absolute-filenames --quiet >/dev/null; then rm -f -- .need_shutdown else # something failed, so we clean up echo "Unpacking of $IMG to /run/initramfs failed" >&2 rm -f -- /run/initramfs/shutdown exit 1 fi if [[ -d squash ]]; then unsquashfs -no-xattrs -f -d . squash-root.img >/dev/null if [ $? -ne 0 ]; then echo "Squash module is enabled for this initramfs but failed to unpack squash-root.img" >&2 rm -f -- /run/initramfs/shutdown exit 1 fi fi exit 0
Copyright ©2021 || Defacer Indonesia